Poor Christie, having to stand out there and film you for two days in the sun and heat and poison ivy blowing around. What a great wife you have. Very interesting test. I appreciate your input.

@Dan-oz4qb

21 күн бұрын

She really is special. 😊

I remember when you started this property. What a transformation 😮 Hope your lives are getting back to normal.

Tim, what I find interesting on this project is the old farmer’s always told me that when the outside rounds of a field were done the field was 1/4 way done. Even with the odd shape you mowed that math of 1.5hrs to do outside rounds would put you at 6hrs for the whole property. Those old farmers sure did always know what they were talking about.

You have done so much for the small tractor community

Awesome demonstration Tim! Next cut let’s mow it with the 3046r and the ts10 !!!

Tim like that you took the time to explain the advantages and disadvantages of the 1025 setup. Like you said there are alternatives.

Absolutely have to agree with you TIM, a canopy and fan make a huge difference on a tractor when mowing. I use an green top canopy from ebay and a 16" radiator electric fan from Amazon and made my own mount and screen.

I've NEVER been first on a video. 4' mower on more than 4 acres? Amazing. Great drone shots.

@nickc7320

26 күн бұрын

The hero we need

For cleaning off the grille, I have a small battery powered workshop blower that is just the thing for getting all the grass seeds and fluff off the tractor and give the thing a quick clean when I'm done. Saves bringing the seeds back to the house yard and the shed..

Great video work. I mow my 7 acres with the 1025R and the GM1060E. Although I don’t let the pasture get out of hand by cutting them once every 3-4 weeks. The grooming mower on the 3point, in my opinion works better for me than the belly mower. Living in SC, I agree an oil temp gauge would be nice. Thanks for your videos.

we had a flail chopper in ohio we used to chop oats or grass to feed for silage, then we took the upper off and put cap on to chop corn stalks and it worked well for brush

I'm glad you talked about the hydraulic temp. I'm going to drop Hydros + a note and let him know I'm interested in a gauge. As always, thanks for sharing.

Amazing video! Thank you for all that great advice in my opinion. Thank you for posting 😀

I used to mow an R/C model airplane field with a Ford 8N and flail mower of equal age. No rocks, no brush, and it was set low. Did a finish mower quality cut. I use a 48” Everything Attachments HD rotary on my 1025R, but in addition to an old pasture now mostly just a dog play area I mow trails through brush lots and paths through woods. LOTS of rocks, roots and occasional small fallen branches and dogwood/milliflori rose.

Hi Tim! Loved the video. I just finished mowing my 8 acre field with my 1025R and a 4’ RC2048 cutter. Grass was taller than the hood. Slow going to cut through that much material but it gets the job done. Hasn’t been anything I can’t do with this tractor. Might take longer than I’d like but that’s another issue!! Took me about 14 hours. Keep up the good videos!!

@TractorTimewithTim

25 күн бұрын

Wow! Persistence!

I really enjoy the tower project.

Thank you for sharing this info.

Hard to beat a rotary cutter. I use a 60 inch Howse brand from the 80s. They are lighter and my sub compact runs it fine. I use a massey 25hp and it has a fan that keeps the oil cool. I would use a finish mower but I like knowing that when I hit a branch or rock I don't have to worry about spindle/blade damage.

This was a fun informative video thanks. I have been watching videos here for a long time and I seem to recall back years ago when Tim would have thought $100 an hour for mowing was a good rate. The wealthier you get the smaller $100 looks.

@TractorTimewithTim

26 күн бұрын

No, that is incorrect. We have a complete video attempting to help folks set prices. In general, $100/hr is insufficient to make any money operating a tractor. And this has only got worse with inflation. How Much Do We Charge? Tractor Side Hustle kzread.info/dash/bejne/eJiFt8Gdo8u3Y8o.html

I use my 2025R with a Frontier 48' b-hog to do walking/ATV trails and it's perfect. If someone would make a 54" cutter I'd seriously consider buying it. Like you said Tim. A 48" works but could be a little bigger.

I find I’m faster if I don’t picture frame the mow first. I take the longest straightest line and do my cleanups in the turns. Also I don’t think you need an older tractor. A 2wd 5050e cost about as much as a 1025r with a loader. I mow a couple properties like this with my 3025e and a 5’ rotary cutter. I always question whether or not I should be doing it. I do enjoy it though. It’s a nice change of pace from the spraying I normally do.

@TractorTimewithTim

12 күн бұрын

Fair statement on the 2wd 5e. Quite cost effective.

Your points are spot on. I have more trimming in my woods which takes more time than the long clear areas. Even with my 6 foot rotary cutter with somewhat more acres, it still takes time. I guess it’s all relative, and what one is willing to put up with. But doing it with a cab tractor is so much more tolerable :-). Blessings

@TractorTimewithTim

26 күн бұрын

Yes. I was DEFINITELY missing the cab!

well, i have ten acres and about half of it is mowable. I started out cutting it with my 1025. did a great job. was slow though. then I got a 9 series zero turn and cut my time in half.

Those drone shots are incredible! Way to go team!

As much as I enjoyed mowing that with you guys (with Johnny 5 and the TS-10), I'm glad I missed this adventure!

@TractorTimewithTim

22 күн бұрын

Yea! Wish I had!!!

Fascinating experiment! Love the content, channel, and results?

Good vid Tim. I have an old Woods 5' rotary cutter pulled by old IH 274 diesel (27.4 PTO HP) and could mow the stuff you were cutting in high range 2nd or sometimes have to drop down to high range 1st. Slow, but got-er-done (10 - 12 acres). Do it now with a Deere 997 ZT with 72" deck, lots quicker and lots better.

I use a chain on my top link for any rear mower.

@RobertBrown-cz9qz

26 күн бұрын

I’ve got a old supper B 80s model and yes it helps on wear & tear on cutter

My little blue 94 Ford 1320 bought new in 94, yup 30 years in this seat, 5' cuts 1 acre per hour with ease, keeping pto at 540 burns about 3 quarts per acre/hour. in heavy grass 2 quarts in light duty.

Great video!

I use this same set up on my 5 acre lot. It takes ALL DAY. Grass isn't as thick so it does a better job and I use less fuel but it sure uses a lot of time.

I think all things considered for the height of the grass, the size of the tractor and the mower, it did what its supposed to do. Not sure how often this is maintained but Im sure time and effort all around would come down with more frequent maintenance. The TB equipment seems to holding up well for the value.

@JMSynthetics

26 күн бұрын

This would be a good test case for HydroPlus's larger hydro cooler to see if temps come down or improve with sustained use

@TractorTimewithTim

26 күн бұрын

I never see over 165 with Hydrosplus.com oil cooler. Use code TTWT :-)

Deere will let me order a canopy and fan. Green Parts Store will ship for free with your code. I had decided to try the canopy alone until I heard your comment about the fan.

I remember last year you used the blue tracker (battery) cutting the hole field and it did a great job. I do miss watching you work on that tracker around the farm. Sorry to hear that there out of business.

@TractorTimewithTim

26 күн бұрын

Wait, you remember incorrectly! I mowed for 1 hour 50 minutes then the battery died. Not even 1/2 the field.

@johnhershey4010

26 күн бұрын

@@TractorTimewithTim Thank Tim. I don't know that. I thought you cut the hole thing. Glad you remembered..

i made a flex hitch on my 48" cutter , they help

Great informative video. Would like to see it with a 5 or 6 foot, and then the flex wing. Then summarize each mower, the rate per hour of each, and total cost per job per machine for those 4.3 acres

@TractorTimewithTim

26 күн бұрын

Total cost per job is much more difficult. We have an entire episode on this. How Much Do We Charge? Tractor Side Hustle kzread.info/dash/bejne/eJiFt8Gdo8u3Y8o.html

The SCUTs work well only on properties which are small. The SCUTs niche is working in more confined areas where their smaller turning radius is an advantage. When you get to long straight runs, bigger will always be quicker.

I have a 2032R with a 6’ fail mower and mow 4.1 acres. It takes about 3:15 hours to do. It is surprising that a bit more HP and 2’ more mower will cut the time by a fair bit. My ground is a bit smoother but not park like.

@TractorTimewithTim

26 күн бұрын

2’ more cut. …. One could say that it is 50% more cut. BUT if you could overlap, I suspect you get 5 ft cut per pass where I get 3’ cut per pass. So, 66% more.

All Good

Very nice

When you mentioned it in a previous video I thought you would have Dave doing it 😂😂

@TractorTimewithTim

23 күн бұрын

Why didn’t I think of that!!!?

Hey Tim! Just wondering have you ever thought about haying this? I think that would be cool for the viewers and also a little bit of side money.

My 48 Brush Hog is 40+ years old, and still works perfectly and has never broken down. I bet a Flail mower cant go a season. They are definitely the best value per dollar youll ever spend on implements.

@glenbreaks5448

24 күн бұрын

Flail mowers do alright. I have an Italian built 88" that I purchased new about 15 years ago. I have mowed about 80 acres per year with it every year. Most years It mowed that area twice, so 160 acres x 15 = 2400 acres to date. I've put one new set of belts on and turned the fails, that's it for mechanical work. I just grease it and go. It cuts fast and leaves a nice job behind. The material gets chopped up fine which is good for regrowth. The suction created by the fails lifts the material flattened by the one set of tires that runs on the uncut pasture. I also have a 72" Landpride bush hog type mower ( inherited) but don't use it. The flail mower is faster and does a nicer job. Cost is the only issue. I think the Landpride cost about $1200 new while the flail mower was about $8,000, so it ought to work better!

My New Holland 1630 has an oil cooler in front of the radiator. My 1520 may also.

Tim. Your video was spot on. I spent 7 hour the other day to mow 6 acres of thistle. Much bigger tractor 60 HP Kubota, with 6 ft brush hog, but new air ride seat. The issue is how rough my field is. Much rougher than yours with terraces carved into the hillside years ago. I can't do more than 5-6 hours a day, in low gear, without morphine at end of for my surgically repaired back. :-) I would like a much bigger bat wing but don't have the rear hydraulics, yet. So dollars for batwing ($$$), dollars for hydraulics ($$), or just mow a few acres every week and rely on drugs to recover. As a hobby farmer it looks like the third option for now.

@TractorTimewithTim

25 күн бұрын

Funny!!!

Would be interesting to mow this property with every one of your tractors and implements as part of a series then do a summary episode comparing them all. Include in this a zero-turn if you think it can mow this property without tearing it up. You could include subjective elements like sub-compact vs compact vs utility comfort to mow the property. Part of that will be features of the tractor but also wheelbase, width and weight should benefit larger tractors. Just some thoughts. Thank you

My LS tractor the seat is like sitting on plywood and I really don't have leg room. I bought a mower from tsc and they don't really have instructions except for cutting the driveshaft. I bought a 5 footer but still not as wide as the back tires, so i kinda overlap when mowing and I find it better to remove the bucket. It's over priced for what it is and i probably wouldn't buy another one like it. The lower pins i had to loctite them to keep the nuts tight. I never had that happen before. I like that seat you have, it's like the one on my zero turn and it doesn't work anymore, maybe from the salt air in Florida. This mower does cut well, just this year the grass and weeds were taller than the tractor in spots.

Morning 🇨🇦

A man in wv he and his wife use two ventracs to cut with does a great job cutting

On the 1 series. Low range is too slow, high range is too weak to pull itself. A middle range would be nice.

@TractorTimewithTim

26 күн бұрын

Think so? I find low range to be fine for most applications. I can’t stay in the seat in high range.

@MJF40

26 күн бұрын

2025r is the same way.

@RobertBrown-cz9qz

26 күн бұрын

Same here with my 2210

@shawndickmann8215

26 күн бұрын

Same with Kubota BX. Agreed.

@hotrodsrx

26 күн бұрын

I say that with my 2520 as well. A medium range would be nice to have.

Can we get a comparison on the 1025 mowing to the ventrac on time wise mowing the tower property?

Great video. I do side mowing as a means of extra cash. Based on your money videos, I doubt the land owner would pay what you feel you needed for the time spent. As far as the mower, you called it a rotary cutter. Is it a cutter with a sharpened blade or a bush hog bar? When I’m asked to do a property, my first question is “how long has it been since it last cut”? If it’s over a month I take the brush hog. If it’s a monthly cutting, I’ll take a finishing mower or flail mower. As you mentioned they all have advantages and disadvantages. Good video 👍

One of the big things about cut quality on a rotary mower is keeping the blades sharp

I use a 5 foot brush hog on my mahindra 26 hp and it doe's a fine job!

I got a John Deere 50 and a 6' single spindle brush hog that I use for my brush hoging jobs around the farm

The number one advantage a flail mower has over a rotary is it doesn’t throw rocks, sticks, etc, I have had rotary mowers throw rocks 300 feet, unless your out in the middle of nowhere then I would take the rotary over a flail.

Need to put a reverse fan they don’t exist but should be an option. or have one 3-d printed if it senses i’m getting too hot it reverses to self clean dust etc.

Good Morning and thank you for the information. What do you do with the most of the attachments after you get done doing test / demonstration? Do you sell them, send them back, or keep them? Asking because I do live kind of close “Delphi “ and I have a 1025r .

Hey tim for the poison ivy, try scrubbing down with rubbing alcohol, you probably know that tip, but it works for me, thanks for the videos

Tim an old farmer taught me if you think you have been exposed to poison ivy wash with bar laundry soap washes the oils off also helps to use if you get poisson ivy to dry it out

@109jacosta

25 күн бұрын

,we used felsnapha soap

Thanks Tim. That grass wasl tall enough to Sickle bar Mow and bale it up HAHAHAHAHA..

I do commercial work with a 2025r and a 5' light duty rotary and that is about all it will handle.

Front cut; I believe the bigger Deer tractors in Europe have a front PTO option. Obviously more tractor cost. Would the mini front end articulated loaders be an option for front cut?

You mention a few other types of mowing attachments for the tractor. How about a sickle bar mower?

@TractorTimewithTim

26 күн бұрын

We have shown a sickle on this channel. ...on a 1025r kzread.info/dash/bejne/g4WrxZStks_Peag.html

Hi Tim I have only owned a bunch of belly mower garden tractors and now B2601. I do only smaller yards with grass sometimes that tall. I really don’t have to many problems with using just that. I was wondering is there an advantage to a rotary cutter vs belly mower? Other than getting under trees. Having a rotary cutter for that would be great.

@TractorTimewithTim

26 күн бұрын

Rotary cutter is built stronger. The blade mechanism is totally different, with swing away blades. Much less risk of damaging the gearbox. Especially in the kubota MMM which have the center blade directly attached to the gearbox. (Deere belt drives all 3 blades). Additionally, rotary cutters are equipped with stump jumpers to help the spindle ride over larger obstacles. These cutters are simply made tougher for mowing larger stuff.

Tim, I just got the new seat figuring it would work on my 2018 1025R. Well I’m having a challenge. I had to remove the existing seat hinge plate and use the supplied mounting brackets. That means I can’t use my backhoe. I will be contacting the vendor to see if they have an alternative. I will update this as we get a resolution

@TractorTimewithTim

18 күн бұрын

It does not work with the backhoe. Sorry. I mentioned that in the full review/install. I believe that info is also in the seat’s description. Unfortunately, I failed to mention it in this episode. Sorry.

@jamesberg3106

14 күн бұрын

Tim, we talked to the manufacturer and they said we were the first to bring it to their attention. They indicated they would try to fabricate a base with a hinge

Re flail mowers. An old professor when I was in engineering school told us that the probability of failure of any mechanical device is a function of the cube of the number of moving parts. Twice as many parts, eight times higher probability of failure. But, the probability that the failure will leave the device inoperable can be lower. Loosing one of sixty-four flails doesn’t leave the flail inoperable. Lose a gear on the single point, and you’re done for at least a day.

@TractorTimewithTim

26 күн бұрын

Losing one hammer would indeed leave it inoperable….so far out of balance that continuing would shake the mower apart.

A lot of this question depends on the job you’re doing. I own a junk and debris removal company myself and love the 1025R we will be using it on Friday to remove a bunch of old rotten railroad tie garden plots and level up the yard afterward. It is perfect for a job like that. My skid steer would tear their yard to oblivion.

@TractorTimewithTim

26 күн бұрын

I was specifically addressing brush mowing. Was that not obvious???

I have 6.5 acres and a few cows keep it mowed and fertilized for the most part. I shred 2 times a year with an undersized 5’ Ford shredder that is old old. Would like to get a 6’ since that’s width of tractor but cost doesn’t add up for two cuttings a year. I’m wondering if the HST is cause if heat issue as they’re more setup for stop and goes than constant run? I have gear drive but no temp on hydro so have no clue if it runs cooler or not with hydro.

Tim, while I agree that larger property mowing would not be real feasible with a sub compact, I would caution folks on how big of a tractor/cutter they should purchase. If they go to a large frame tractor (often the case with the 99-100hp tractor, they could end up needing a smaller tractor to do trim work under and around trees or other objects in many properties. Personally, I would never take a fail mower to a property that I did not know or a property I knew had debris and or rocks on it.

id be interested to see if the 1025r can handle a 5 ft trailed cutter ive got a 5ft trailed king kutter or my 9n ford and they are roughly the same pto hp

I have a 1023E and I watch TTWT all the time. I really enjoy seeing what you have going on. Watching you haul that loader and grapple around for hours is agonizing. I realize you have some rocks there to deal with and I get that. But JD has engineered this tractor so well, it take 2 minutes to remove the loader. Why wouldn't you have it on site, but remove it for the hours you spend bouncing around the field. Plus your center of gravity will be lower for a smoother ride side to side. My 2 cents. You probably are used to it and do not even notice. Like my neighbor who used to mow his lawn with a 1025R with a belly mower, loader on the front and backhoe on the back. 🙂😲

@TractorTimewithTim

19 күн бұрын

If I take it off, folks have a fit. If I leave it on other folks have a fit. I used it here to push back some brush on the brush piles. I find it advantageous to have it on while mowing.

@poorsob

19 күн бұрын

@TractorTimewithTim well I certainly get that. And you are very good at what you do. I really appreciate how, in one day, on my 2 acres, I can till my garden, haul things in the loader, then remove everything, drive over my belly mower, and mow the lawn. And only lose 10 minutes switching things over. I love it. And mowing with the one series with a belly mower is fun for me. Lots of blade speed and nimble enough to mow around the house. Now, if I could just stop hooking the blinkers on tree limbs...

yea i wish i had a oil cooler on my 2305

I'm surprised by your criticism of flail mower not handling the bigger stuff. My experience is the exact opposite.

@TractorTimewithTim

24 күн бұрын

Fair enough. There are many different types of flail mowers, and there are many different types of materials. So, plenty of room for different experiences!

How much would you charge the tower people to mow this if you were being paid by them? 6hours mowing and some travel time. and would your hourly rate be much different if you were using the 3 or 4 series Johnny and the 10-foot batwing mower. This video was great example of the seat time you can have if mowing your own property or the same time earning a living.

You can use a wider flail mower then a rotary cutter, and a flail Does a significantly better job then a rotary cutting with Y blades on it

I have had a different experice with my flail mower, i have a 28 hp compact tractor and using a 5ft flail in heavy grass requires a lower gear and seems to bog the tractor more than my 5 ft rotary cutter.

@TractorTimewithTim

26 күн бұрын

Makes sense. Lots o mulching goin on inside that mower.

I would be interested in seeing you review one of the newer design bar mower for ditch and pond bank mowing.

@TractorTimewithTim

25 күн бұрын

Sickle bar? Mowing Overgrown Ditch Banks! Turbo Subcompact Tractor + Sickle Bar Mower! kzread.info/dash/bejne/YmqLzduPdtTPXco.html

@markb5948

25 күн бұрын

Correct. The last one I used was a 1960s or 70s model on my grandfather’s IH 300 tractor. I did some research a few years back on the newer versions for my old JD 790, but never demo’s or picked one up.

@TractorTimewithTim

25 күн бұрын

@@markb5948check out the video I linked. I have a couple more.

If i remember right it looks like the batwing mower mows better then the 3 point hitch mowers but it seems like a bigger tractor is needed for the batwing

@TractorTimewithTim

26 күн бұрын

correct.

I HATE POISON IVY !!! It can sneak up on you like this case where the oils just used the wind flow to get on you! I have mowed that kind of property or rather lawns that were let go for a whole summer with a regular finish mower. It would of been a much better idea to use this small brush hog because I could of found the rocks, toys, bricks, garden hose, firewood chunks and so on with this more stout mower. Even though one walks the property to try and find that kind of stuff, one never finds it all. After using this small brush mower one could come back in a few days and use the finish mower at a high setting to make it look like a lawn. Then hopefully the lawn would be on a regular schedule and one would mow just a bit shorter each time to get it down to the correct height. Often costumers are not that patient and you have to explain that one can't go from abandoned field to golf course in one day!! I love that seat!! That type of seat made a very big difference on my larger tractor.

I would love to see a comparison between the 6ft and 10ft!

@TractorTimewithTim

26 күн бұрын

We have done cut quality, but not cut time. kzread.info/dash/bejne/ZaSOxsiEj8fKirA.html

If the flail mower isn't doing it, you are using the wrong hammers. Add a oil cooler for the hydros.

Tim, following the "fail mower hype", I'd really be interested in seeing larger flail mowers like 7'-10' for the 5075e, maybe even a pull-type vs 3-point

@TractorTimewithTim

26 күн бұрын

Do you have a particular pull type flail in mind? I don't know of any majors that make them...especially flex wing.

@John_Brown_33

26 күн бұрын

@TractorTimewithTim Aside from the typical Tiger and Alamo commerical mowers, Peruzzo makes a 4200-R triflex flail mower that looks pretty interesting.

👍

I wondered how they mow those areas.

I learned a lot Tim! Mostly about the accessories. Likely ordering the seat. By chance do you have a link for the canopy fan. I want that for my 3039R

@TractorTimewithTim

26 күн бұрын

don't forget code ttwt for the seat. I may have failed to mention.

@TractorTimewithTim

26 күн бұрын

I'm afraid there may be a legal issue on the fan. Contact artillian.com to see if it is still available.

@jamesberg3106

25 күн бұрын

If you did say it, I definitely didn’t remember.

I just have a question. How come you don't have to engage the RIO button while backing up with PTO running. With my mower deck it instantly stops the tractor.

@TractorTimewithTim

25 күн бұрын

I don’t think that applies to the rear PTO. ….in any case, I zip tied that switch.

I’m looking for a brush mower to use with an Oliver Super 77. 7 or 8ft wide. The tractor has a drawbar and 540 pto. The only problem is it has NO hydraulics. Any recommendations from anyone on what to get/do? Thanks!

@TractorTimewithTim

23 күн бұрын

Hmm. I think you can add a hydraulic remote, right? There are pull type 7-8 ft mowers available.

nice to have a cab. No poison ivy.

I gotta say I prefer the cut quality of a flail mower.... even with hammer blades I can cut my lawn. Then I can take it out into the forest and it is more nimble around trees etc. That being said I don't have a rough cut mower to compare....

Been a while since we’ve seen you at the tower site. I’m sure you’ve seen some dash thunder videos. He makes a living with a 1025R and 4 foot implements. He recently changed the name of his channel. His actual name was Dash Thunder so that’s probably why he changed it. I couldn’t watch all your video this morning because my wife started talking and I’ll catch it this weekend. Tell Christy I said hey. I’m sure if you had a time machine you would go back in time and rename the channel Tractor time with Tim and Christy…

It aint gona cut it with you Tim i know you!

Do the isotunes mic work decent while on the tractor? Thinking phone calls. Or is there just too much noise?

@TractorTimewithTim

26 күн бұрын

The Link 2.0 with the extendable mic works great. The closer the mic is to your mouth, the better it works.

Having 85 acres of sagebrush I want to mow, my 6ft brush hog would take forever. I do want a flex wing mower but they are so expensive.

How often do you have to sharpen the blades on the mower like that? Every job, once a year.. or just when needed?

@TractorTimewithTim

26 күн бұрын

Only when they ‘roll’ upward. We leave them quite blunt. Otherwise they roll upward pretty badly, or break off

One of these days I will own a ventrac!

Would a 6ft flail mower be to big for a 1025r with future plans to turbo?

@TractorTimewithTim

25 күн бұрын

Likely too big. Might not be able to lift

Heh I did my 35 acres on my 2305 jd with a 4 foot cutter NEVER again it took 33 HOURS!

Is there a reason why you did not remove all that brush next to the towers? I would expect it to get tall enough at some point to be a problem.

@TractorTimewithTim

26 күн бұрын

Still working at it, Ken. We save a bit of it in case we get a new brush mulcher to try :-)

I found that with the 1026R with a 60D, I could cut a lightly tree'd 10 acre area at top speed 15-20mph in 5 hrs

@garymeyer3294

26 күн бұрын

Now, how do you manage to do that? Isn't the top speed of that tractor only 9 mph when empty on a road?

@TractorTimewithTim

26 күн бұрын

That's nothing. My 72D on my 1025R can cut it in 1.5 hours at 30mph!!!