Please...Like, Comment, & Subscribe Also... Check Out Our Other Channel J's Crazy Cutz / @jscrazycutzllc
Жүктеу.....
Пікірлер: 96
@davidleatherneck11 ай бұрын
My Wife asked me why it was taking me so long to watch this vid. I told her I was watching the grass grow. Looks like it could have been mowed a week ago. Good vid. Thanks
@XtendedCutz
11 ай бұрын
Thanks! Glad you enjoyed it!
@KurtJohnson-qp8qw Жыл бұрын
Delivered a nice even cut, has the super tight turning ability kzread.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend I was looking for, and is just a blast to drive. It takes a little bit to get used to driving one after driving a normal tractor style, but once you've got it, you've got it. If you're cutting lines, you have to be careful spinning the mower around or the back tire will dig a bare spot. Just take it nice and slow during the turn and then it's back to full throttle across the yard!
@XtendedCutz
Жыл бұрын
Thank you!
@mow4ulawnmowingservice4972 жыл бұрын
Beautiful place brother 😎😎very green grass up there
@XtendedCutz
2 жыл бұрын
Thank you! It is quite beautiful!
@whyamih3re5842 жыл бұрын
This channel is so underrated, I love your content!
@XtendedCutz
2 жыл бұрын
Thank you so much! We appreciate you watching!
@dirtydon86612 жыл бұрын
Glad I found this channel. Learned to ski on that river.
@XtendedCutz
2 жыл бұрын
It is a beautiful place! Thanks for watching! We hope you continue to enjoy our content.
@XtendedCutz
2 жыл бұрын
This is on the river too… kzread.info/dash/bejne/kZukrMyzgs6Tcdo.html
@robcole82182 жыл бұрын
That Ferris is a BEAST
@XtendedCutz
2 жыл бұрын
It really is 😁 thanks!
@channelqu2 жыл бұрын
beautiful place and very green grass
@XtendedCutz
2 жыл бұрын
It is beautiful! Thanks for watching
@paulpeppers5914 Жыл бұрын
I’ve never seen a zero turn hold a hill like that that’s amazing
@XtendedCutz
Жыл бұрын
It’s a great machine! Thanks for watching!
@ladymayhemladymayhem12372 жыл бұрын
Excellent job,but that water made me so nervous.gud on you mate I loved every bit of this.🤗🤗🤗🤗🤗🤗
@XtendedCutz
2 жыл бұрын
Thank you!! Thanks for watching!!
@MadRhetorik. Жыл бұрын
My backyard is about like that hill. It routinely gets 5 feet tall(out of town worker) and all I got is a push mower. It sucks ass. The local lawn companies want $100 a week to mow it so it doesn’t get mowed till I come home once every 2 months lol.
@XtendedCutz
Жыл бұрын
Wow that must be a project to mow! Thanks for watching!
@robcole82182 жыл бұрын
I don’t think I would have started at 3.75 with mine but it didn’t show that Ferris anything 👍👍👍
@XtendedCutz
2 жыл бұрын
Still got the power with over 1,500hrs 🙌🏻
@JsCrazyCutzLLC2 жыл бұрын
That grass was no match for the Ferris 👉💪👈
@XtendedCutz
2 жыл бұрын
It is a BEAST!
@131dyana2 жыл бұрын
Tall grass and indeed an insane hill. But you and machine did a great job.
@XtendedCutz
2 жыл бұрын
Thank You!!
@naimsaleem14912 жыл бұрын
From Malaysia watching
@XtendedCutz
2 жыл бұрын
Thanks for watching!!
@shanepipkin40412 жыл бұрын
pretty lake property where is this at?? what engine is that I have the fx801 it's a beast you should try scag high lift blade it will help push clippings out better
@XtendedCutz
2 жыл бұрын
This is on False River. The engine on this mower is the 37HP Vanguard
@sharynhay99932 жыл бұрын
Looks like grass is too short but it will grow out. Interesting property.
@XtendedCutz
2 жыл бұрын
Thank you for the comment! We did take a LOT off but it was extremely tall and it had to be brought down for maintenance. This was cut at 3.75” it is now kept at 4”.
@jonathonwhite5147 Жыл бұрын
Hello. Im really glad i found your channel. I live in the Mountains of North Carolina and im looking to buy a zero turn mower for my property and your Ferris mower done amazingly well on that slope. What series and engine choice of mower do you have ?
@XtendedCutz
Жыл бұрын
Hello! Thank You! This is our Ferris IS3200 I believe the IS3300 took its place but I’m not sure. If you want information on this mower please check out our other channel. J’s Crazy Cutz. We have a long term review and many maintenance videos on it.
@upscalelawncaremonroe4082 жыл бұрын
I have a lawn with the levee in the back!
@XtendedCutz
2 жыл бұрын
Can get a little steep
@rickvann34893 ай бұрын
Lmao...what hill? Come to my house and gawk as the locals do when I mow with my Spartan 32hp Vanguard oil guard FULL Suspension and Suspension seat.
@XtendedCutz
3 ай бұрын
For us this is a hill, we live in a flat slightly marshy area
@PAIDFOR50Ай бұрын
I did a hill like this. Now I need a new transmission 😢
@XtendedCutz
Ай бұрын
🥺 that’s sad, sorry that happened to you.
@waymakerlawncare9312 жыл бұрын
I just found yall channel and I Subscribe
@XtendedCutz
2 жыл бұрын
Thank you!!
@logansimpson3052 жыл бұрын
Great video
@XtendedCutz
2 жыл бұрын
Thanks Logan!
@ericstinnett91822 жыл бұрын
Great video, I do have a question if you don't mind me asking? How come you cut it so low, was it because of the customer request, or or wanted to see what the mower could do? Cause that would have made some awesome strips especially looking from the lake. Thanks
@XtendedCutz
2 жыл бұрын
Thank you!! To answer your question…this was mowed at 3.75” it just looked like it was cut extremely low because it was over a foot tall. This was a clean up mow so we could get it to a manageable height and to match the lot on the side of it we mow. It is kept at 4” now and the stripes do look NICE 😍
@timothyhnida89652 жыл бұрын
Good job for a Ventrac.
@XtendedCutz
2 жыл бұрын
It would be! Thanks for watching
@OudomOfficial2 жыл бұрын
I love your video 😊
@XtendedCutz
2 жыл бұрын
Thank you! We appreciate you watching!
@OudomOfficial
2 жыл бұрын
@@XtendedCutz Welcome 😊
@AllenReinecke3 ай бұрын
Wow! That was hard on the hydros and the cutting system. How many hours on that Ferris at the time? Is it still running now?
@XtendedCutz
2 ай бұрын
The mower in this video I think 🤔 had around 1K hours on it when we did this. We still have the mower, we purchased it in 2017. It now has over 2,200 hours and we still mow with it! Has been an all around FANTASTIC mower for us! Thanks for watching and commenting!
@AllenReinecke
2 ай бұрын
@@XtendedCutzAwesome. I'm picking up my ISX 800 this week! 👍
@XtendedCutz
2 ай бұрын
Hope you enjoy it! This is the ISX3200 they have since updated it to the ISX3300.
@AllenReinecke
2 ай бұрын
Understood
@XtendedCutz
2 ай бұрын
We also have another channel we’re we do reviews and maintenance of you are ever in need of that information it is @JsCrazyCutzLLC
@markescartin1915 Жыл бұрын
Where's the FW15 the natural complement to any Ferris mower?
@XtendedCutz
Жыл бұрын
We don’t have a large need for walk behind mowers here. Put that would have worked great!
@terrysmith74542 жыл бұрын
how did that customer like there lawn lower like that . tuff job for a mower but i would of cut it on about 4inch plus i mulch in my area they love it . keep cutting .
@XtendedCutz
2 жыл бұрын
This was the first cut for us on this property. We were cleaning it up before we took over the regular maintenance. It now stays cut at 4”
@yulidarta2 жыл бұрын
Mantap bro 👍💪.
@XtendedCutz
2 жыл бұрын
Thanks for watching
@bobjeans2 жыл бұрын
That Ferris is big
@XtendedCutz
2 жыл бұрын
It really is a monster mower 😁
@robertmailhos81592 жыл бұрын
Thick grass cutting on a .steep Hillside.that one way to find out.if you got the right type of.mower
@XtendedCutz
2 жыл бұрын
That it is 😁 Thanks for watching
@robertmailhos8159
2 жыл бұрын
@@XtendedCutz cool 😎
@markmilan012 жыл бұрын
Wooo you cut that grass low lol
@XtendedCutz
2 жыл бұрын
It looks very low but we keep it at 4 inches now! Thanks for watching!
@markmilan01
2 жыл бұрын
Was that the first cut?
@XtendedCutz
2 жыл бұрын
Yes it was the first one after taking on the lawn.
@BimaSakti-jm7up2 жыл бұрын
Good
@XtendedCutz
2 жыл бұрын
Thanks for watching!!!
@FW14B Жыл бұрын
Which model? Thanks.
@XtendedCutz
Жыл бұрын
Thanks for watching! This is our Ferris IS3200Z mower!
@FW14B
Жыл бұрын
@@XtendedCutz wonderful, trying to decide on a mower for cutting my 30 acres of horse pastures. They are relatively flat and without thick weeds so I believe a zero turn could tackle it, especially after seeing this. It would certainly be faster than an 8ft rotary cutter behind my tractor. in-between the IS6200Z, 3200Z or a SCAG turf tiger II. Any suggestions?
@XtendedCutz
Жыл бұрын
Both are great mowers. I would look at dealer support as one of the deciding factors. We do LOVE our Ferris suspension! And the Briggs Vanguard has been an AMAZING engine for us. That is what is on our mowers.
@aggressivelyamicable5987
Ай бұрын
@@XtendedCutz Hello, I was looking to purchase a used IS3200Z with 1100 hours. How would you rate the overall performance and does it run into issues often outside of ordinary maintenance? I would just be using it for a farm property with 3-4 acres worth of grass. Also, is yours the 60" deck or 72"? I was looking at the 72" and I'm a little worried it might be too big.
@XtendedCutz
Ай бұрын
@aggressivelyamicable5987 we have a 61” deck. We have another KZread channel that we do lawn care videos with maintenance and reviews. We have a 1,000hr review on this unit in one of our playlists. We have done multiple videos on this unit that might give you a good idea. The channel is @JsCrazyCutzLLC. At this moment the unit has over 2,200hrs and is getting the engine replaced, but only because the inner air filter failed and damaged it not for wear and tear. Hope this helps!
@teddyallen91722 жыл бұрын
I remember when you guys did that the hill is insane they say always go across but up and down feels safer to me
@XtendedCutz
2 жыл бұрын
Yes in deed! Thanks for watching!
@fronteraarno2 ай бұрын
Wat vaker maaien
@XtendedCutz
2 ай бұрын
Thanks for Watching
@GroundmaintenanceTv2 жыл бұрын
Nice to cut that property near the sea
@XtendedCutz
2 жыл бұрын
Thanks! It was once an offshoot of the Mississippi River . But over time it got disconnected and is now a lake!
@jeremys9592 жыл бұрын
Little confused on some of the mowing patterns in the second half
@XtendedCutz
2 жыл бұрын
We weren’t focused on stripes or nice lines this first cut. It was mostly getting it knocked down, dispersing the clippings, and doing so with care so as not to lose control. Thanks for watching!
@jeremys959
2 жыл бұрын
@@XtendedCutz makes sense, looks like it was fun to cut
@guybretz44232 ай бұрын
SCALPER !!!!
@XtendedCutz
2 ай бұрын
The grass was so tall it would have looked like it was scalped at almost any height. This was a first clean up cut for a Bahia lawn. If I remember correctly it was cut around 3 1/2”. Thanks for watching
@TNsher7765 ай бұрын
You're cutting that grass way too low buddy! Should be mowing it around 5.5"
@XtendedCutz
5 ай бұрын
Ideally that would have been a good height. But the customer wanted the property to be cut closer to 3” for maintenance. As it was mostly Bahia grass at this time we knew it wouldn’t damage the grass to mow that low. Thanks for the comment and watching!
Пікірлер: 96
My Wife asked me why it was taking me so long to watch this vid. I told her I was watching the grass grow. Looks like it could have been mowed a week ago. Good vid. Thanks
@XtendedCutz
11 ай бұрын
Thanks! Glad you enjoyed it!
Delivered a nice even cut, has the super tight turning ability kzread.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend I was looking for, and is just a blast to drive. It takes a little bit to get used to driving one after driving a normal tractor style, but once you've got it, you've got it. If you're cutting lines, you have to be careful spinning the mower around or the back tire will dig a bare spot. Just take it nice and slow during the turn and then it's back to full throttle across the yard!
@XtendedCutz
Жыл бұрын
Thank you!
Beautiful place brother 😎😎very green grass up there
@XtendedCutz
2 жыл бұрын
Thank you! It is quite beautiful!
This channel is so underrated, I love your content!
@XtendedCutz
2 жыл бұрын
Thank you so much! We appreciate you watching!
Glad I found this channel. Learned to ski on that river.
@XtendedCutz
2 жыл бұрын
It is a beautiful place! Thanks for watching! We hope you continue to enjoy our content.
@XtendedCutz
2 жыл бұрын
This is on the river too… kzread.info/dash/bejne/kZukrMyzgs6Tcdo.html
That Ferris is a BEAST
@XtendedCutz
2 жыл бұрын
It really is 😁 thanks!
beautiful place and very green grass
@XtendedCutz
2 жыл бұрын
It is beautiful! Thanks for watching
I’ve never seen a zero turn hold a hill like that that’s amazing
@XtendedCutz
Жыл бұрын
It’s a great machine! Thanks for watching!
Excellent job,but that water made me so nervous.gud on you mate I loved every bit of this.🤗🤗🤗🤗🤗🤗
@XtendedCutz
2 жыл бұрын
Thank you!! Thanks for watching!!
My backyard is about like that hill. It routinely gets 5 feet tall(out of town worker) and all I got is a push mower. It sucks ass. The local lawn companies want $100 a week to mow it so it doesn’t get mowed till I come home once every 2 months lol.
@XtendedCutz
Жыл бұрын
Wow that must be a project to mow! Thanks for watching!
I don’t think I would have started at 3.75 with mine but it didn’t show that Ferris anything 👍👍👍
@XtendedCutz
2 жыл бұрын
Still got the power with over 1,500hrs 🙌🏻
That grass was no match for the Ferris 👉💪👈
@XtendedCutz
2 жыл бұрын
It is a BEAST!
Tall grass and indeed an insane hill. But you and machine did a great job.
@XtendedCutz
2 жыл бұрын
Thank You!!
From Malaysia watching
@XtendedCutz
2 жыл бұрын
Thanks for watching!!
pretty lake property where is this at?? what engine is that I have the fx801 it's a beast you should try scag high lift blade it will help push clippings out better
@XtendedCutz
2 жыл бұрын
This is on False River. The engine on this mower is the 37HP Vanguard
Looks like grass is too short but it will grow out. Interesting property.
@XtendedCutz
2 жыл бұрын
Thank you for the comment! We did take a LOT off but it was extremely tall and it had to be brought down for maintenance. This was cut at 3.75” it is now kept at 4”.
Hello. Im really glad i found your channel. I live in the Mountains of North Carolina and im looking to buy a zero turn mower for my property and your Ferris mower done amazingly well on that slope. What series and engine choice of mower do you have ?
@XtendedCutz
Жыл бұрын
Hello! Thank You! This is our Ferris IS3200 I believe the IS3300 took its place but I’m not sure. If you want information on this mower please check out our other channel. J’s Crazy Cutz. We have a long term review and many maintenance videos on it.
I have a lawn with the levee in the back!
@XtendedCutz
2 жыл бұрын
Can get a little steep
Lmao...what hill? Come to my house and gawk as the locals do when I mow with my Spartan 32hp Vanguard oil guard FULL Suspension and Suspension seat.
@XtendedCutz
3 ай бұрын
For us this is a hill, we live in a flat slightly marshy area
I did a hill like this. Now I need a new transmission 😢
@XtendedCutz
Ай бұрын
🥺 that’s sad, sorry that happened to you.
I just found yall channel and I Subscribe
@XtendedCutz
2 жыл бұрын
Thank you!!
Great video
@XtendedCutz
2 жыл бұрын
Thanks Logan!
Great video, I do have a question if you don't mind me asking? How come you cut it so low, was it because of the customer request, or or wanted to see what the mower could do? Cause that would have made some awesome strips especially looking from the lake. Thanks
@XtendedCutz
2 жыл бұрын
Thank you!! To answer your question…this was mowed at 3.75” it just looked like it was cut extremely low because it was over a foot tall. This was a clean up mow so we could get it to a manageable height and to match the lot on the side of it we mow. It is kept at 4” now and the stripes do look NICE 😍
Good job for a Ventrac.
@XtendedCutz
2 жыл бұрын
It would be! Thanks for watching
I love your video 😊
@XtendedCutz
2 жыл бұрын
Thank you! We appreciate you watching!
@OudomOfficial
2 жыл бұрын
@@XtendedCutz Welcome 😊
Wow! That was hard on the hydros and the cutting system. How many hours on that Ferris at the time? Is it still running now?
@XtendedCutz
2 ай бұрын
The mower in this video I think 🤔 had around 1K hours on it when we did this. We still have the mower, we purchased it in 2017. It now has over 2,200 hours and we still mow with it! Has been an all around FANTASTIC mower for us! Thanks for watching and commenting!
@AllenReinecke
2 ай бұрын
@@XtendedCutzAwesome. I'm picking up my ISX 800 this week! 👍
@XtendedCutz
2 ай бұрын
Hope you enjoy it! This is the ISX3200 they have since updated it to the ISX3300.
@AllenReinecke
2 ай бұрын
Understood
@XtendedCutz
2 ай бұрын
We also have another channel we’re we do reviews and maintenance of you are ever in need of that information it is @JsCrazyCutzLLC
Where's the FW15 the natural complement to any Ferris mower?
@XtendedCutz
Жыл бұрын
We don’t have a large need for walk behind mowers here. Put that would have worked great!
how did that customer like there lawn lower like that . tuff job for a mower but i would of cut it on about 4inch plus i mulch in my area they love it . keep cutting .
@XtendedCutz
2 жыл бұрын
This was the first cut for us on this property. We were cleaning it up before we took over the regular maintenance. It now stays cut at 4”
Mantap bro 👍💪.
@XtendedCutz
2 жыл бұрын
Thanks for watching
That Ferris is big
@XtendedCutz
2 жыл бұрын
It really is a monster mower 😁
Thick grass cutting on a .steep Hillside.that one way to find out.if you got the right type of.mower
@XtendedCutz
2 жыл бұрын
That it is 😁 Thanks for watching
@robertmailhos8159
2 жыл бұрын
@@XtendedCutz cool 😎
Wooo you cut that grass low lol
@XtendedCutz
2 жыл бұрын
It looks very low but we keep it at 4 inches now! Thanks for watching!
@markmilan01
2 жыл бұрын
Was that the first cut?
@XtendedCutz
2 жыл бұрын
Yes it was the first one after taking on the lawn.
Good
@XtendedCutz
2 жыл бұрын
Thanks for watching!!!
Which model? Thanks.
@XtendedCutz
Жыл бұрын
Thanks for watching! This is our Ferris IS3200Z mower!
@FW14B
Жыл бұрын
@@XtendedCutz wonderful, trying to decide on a mower for cutting my 30 acres of horse pastures. They are relatively flat and without thick weeds so I believe a zero turn could tackle it, especially after seeing this. It would certainly be faster than an 8ft rotary cutter behind my tractor. in-between the IS6200Z, 3200Z or a SCAG turf tiger II. Any suggestions?
@XtendedCutz
Жыл бұрын
Both are great mowers. I would look at dealer support as one of the deciding factors. We do LOVE our Ferris suspension! And the Briggs Vanguard has been an AMAZING engine for us. That is what is on our mowers.
@aggressivelyamicable5987
Ай бұрын
@@XtendedCutz Hello, I was looking to purchase a used IS3200Z with 1100 hours. How would you rate the overall performance and does it run into issues often outside of ordinary maintenance? I would just be using it for a farm property with 3-4 acres worth of grass. Also, is yours the 60" deck or 72"? I was looking at the 72" and I'm a little worried it might be too big.
@XtendedCutz
Ай бұрын
@aggressivelyamicable5987 we have a 61” deck. We have another KZread channel that we do lawn care videos with maintenance and reviews. We have a 1,000hr review on this unit in one of our playlists. We have done multiple videos on this unit that might give you a good idea. The channel is @JsCrazyCutzLLC. At this moment the unit has over 2,200hrs and is getting the engine replaced, but only because the inner air filter failed and damaged it not for wear and tear. Hope this helps!
I remember when you guys did that the hill is insane they say always go across but up and down feels safer to me
@XtendedCutz
2 жыл бұрын
Yes in deed! Thanks for watching!
Wat vaker maaien
@XtendedCutz
2 ай бұрын
Thanks for Watching
Nice to cut that property near the sea
@XtendedCutz
2 жыл бұрын
Thanks! It was once an offshoot of the Mississippi River . But over time it got disconnected and is now a lake!
Little confused on some of the mowing patterns in the second half
@XtendedCutz
2 жыл бұрын
We weren’t focused on stripes or nice lines this first cut. It was mostly getting it knocked down, dispersing the clippings, and doing so with care so as not to lose control. Thanks for watching!
@jeremys959
2 жыл бұрын
@@XtendedCutz makes sense, looks like it was fun to cut
SCALPER !!!!
@XtendedCutz
2 ай бұрын
The grass was so tall it would have looked like it was scalped at almost any height. This was a first clean up cut for a Bahia lawn. If I remember correctly it was cut around 3 1/2”. Thanks for watching
You're cutting that grass way too low buddy! Should be mowing it around 5.5"
@XtendedCutz
5 ай бұрын
Ideally that would have been a good height. But the customer wanted the property to be cut closer to 3” for maintenance. As it was mostly Bahia grass at this time we knew it wouldn’t damage the grass to mow that low. Thanks for the comment and watching!
i wouldnt cut that low
@XtendedCutz
2 жыл бұрын
No sir 😁 it stays at 4” now!