This guy gives the most efficient reviews. No messing around. Straight to the point in every feature.

Short story: I started looking for a new interface that wouldn’t break the bank about 2 months ago. When I saw the M4 on Sweetwater’s website I knew the search was over. Thank you Mitch & team for providing a solid overview video- even if I watched it after ordering ;) When I was first getting into studios it was MOTU everything. Since then I have seen a lot of other companies build on massive PR campaigns and offer over hyped overpriced gear to pay for it. I have used a few less expensive Audio Interfaces over the past few years just as a way to get my ideas recorded, and have been underwhelmed as everyone is selling the same thing with a different coat of paint.

The M2 is the best $150 interface by far. The ESS Sabre32 DACs are incredible! The headphone output is loud. The 5-pin MIDI connectors and the life saving Loopback feature put this interface so far ahead of the class it’s not even close. Long live MOTU!

I was going to pick up a Scarlett but now I'm going to get one of these because I see such positivity and support in the comments from the company that makes these. When people have issues and they voice them in the comment section they often reply themselves. In this day and age of Silent companies well that matters to me.

Bought the first unit that came into my local music store after checking every day for a month and it is absolutely fantastic !! Love using the loopback feature to sample into Maschine !!

@djCatScanRL

Жыл бұрын

👀

I’ve owned the M4 for about 6 months now and it’s incredible. I can’t believe this interface sounds so good and has all these features for such a low price. The preamps are loud and clean. Loopback feature is super useful too.

@engincaglarofficial

3 жыл бұрын

How much did you pay ?

@apj.-.-.-.-.-.-.-119

3 жыл бұрын

@@engincaglarofficial buy from thomann

@engincaglarofficial

3 жыл бұрын

@@apj.-.-.-.-.-.-.-119 thanks very much,

@audiolego

2 жыл бұрын

I bought one. On its way

@batphink2655

2 жыл бұрын

Our local music shop loaned me an M4 because the Zen Go interface I bought was rattling inside like something lose.I loved my 'loaner' so much I bought a new one last week amazing sound quality,clear and rich!

This thing kills all other audio interfaces on this price range... Im sold!

@new2dayuser151

4 жыл бұрын

@German Bueso Not really!!

@danielvelkovski3156

4 жыл бұрын

New2day User what do you recommend is best for < $200?

@ArtyShat

4 жыл бұрын

@@new2dayuser151 What is better then? Motu M4 is slightly better than Focusrite Scarlett 4i4 in my opinion

@new2dayuser151

4 жыл бұрын

@@ArtyShat You could go Lynx, powerfully tried and true interfaces!! Let's see, go grab one of the RME HDSP interfaces, their Almighty as well as Lynx products!! Let's go back in time, if their still around and supported, the heavenly Apollo Twin or the Rockzilla Apogee Duet, Wow, mean stuff right there, brother!!!!! There's many more to mention, these will do for now!! Keep making music and have fun!!!!!

@new2dayuser151

4 жыл бұрын

@@danielvelkovski3156 +;Behringer, check them out, depends on how many ins and outs you need

Buying one of these ASAP, nothing but great reviews, ratings and specs on this little gem.

awesome! i had a MK2 years ago, one of the only pieces of gear i regret having to sell. nice that i can get back into motu for short change. :D

@akashr1370

4 жыл бұрын

U mean apollo twin?

Great, I just found my new USB audio interface.

@olafkliemt1145

4 жыл бұрын

check on the Tascam 102i, too ;-)

@xxspyrogamingxx4751

3 жыл бұрын

@@olafkliemt1145 m2 is still better

@romanpopov6386

3 жыл бұрын

usb-c

Now, THAT'S a Review!!!!!

Just ordered one recently! Can't wait to get it

If they offered an M6, M8 or M10 in this format, I would consider buying it.

@felipevareschi7773

4 жыл бұрын

MixingGBP For that you might want to look at the Ultralite Mk4 or one of the 828ES interfaces

Yay for the software improvement!!🤘🏻

Great review. I saw this when I ordered my M4 and my son bought the M2. We use GarageBand with these on our Macs and they work really well! Sorry I didn't do a review sooner!

Just ordered an M2!

I already have this interface but I watch these reviews to validate my purchases even more lol.

Was about to go with the focusrite Scarlett 2x12 but I think I just found my new audio interface

Great review!!!

Thanks Mitch... but I really wanted to see the back panels:)

I love my M2. I can record into my DAW with no latency and clear sound with no noise. The headphone output also has no latency and sounds super clear.

Sound pretty cool

Love MOTU

I feel like Mitch, Don, and "the Brit guy" are my friends even though I never met them. ;)

much love mitch.😃you are one by one sorting my core confusions ,you have at it like no other into the light, focus and understanding catylising my knoledge.concise inspired🐀🐁

Had my 2nd gen scarlet for about 5 years, still works fine but thinking about upgrading, hopefully this is a good replacement for it

Many interfaces promise very low latency, but once you decrease the samples to anything lower than 128, many of them start acting up. There is no way to really know how low latency you really can get. I know it depends on your computer, but a standard for an apples to apples comparison would be pretty cool. Glenn Fricker from spectre sound studios compared 5 sub-$200 interfaces and showed first hand that some perform way better than others.

This is very unique!

With these being USB audio class complaint that means they'll also work on Linux. I like being able to select phantom power on each channel.

@Podcastage

4 жыл бұрын

Hey. Fancy seeing you here!

@sirnigelcogs

4 жыл бұрын

@@Podcastage Why hello there. Nice looking interfaces, aren't they.

@Podcastage

4 жыл бұрын

Sir Nigel Cogs Gaming something tells me we’ll find out in a few hours. 😉

@MeneTekelUpharsin

4 жыл бұрын

Does the software work on Linux too?

@sufsanin1917

3 жыл бұрын

Will they work on Android?

I take it there is no independent hardware volume control for input 3&4 to the monitor output so you use it as a line and microphone standalone mixer?

Great review and simple and straightforward explanation of the features. I have a couple of questions, though. I realise that this video was released more than two years ago, I just wondered if the MOTU M2 and M4 are supported on the latest M1 / Apple Silicon MacBooks yet (and by extension macOS Monterey)? Second question (and apologies if it's been covered elsewhere) the second pair of outputs 3 & 4, are these independent of the main outs 1 & 2 i.e not a duplicate? I have a use-case where I'd like to configure 3 and 4 as hardware effects sends out of my DAW (Reaper). Thanks in advance!

Thanks for mentioning usb class compliant, I was wondering about that topic. That means this will work on Linux out of the box.

@ferdearmas8732

3 жыл бұрын

Hi friend, and what about Android devices?...

@JonDisnard

3 жыл бұрын

@@ferdearmas8732 Yes, should work with Android.

@ferdearmas8732

3 жыл бұрын

@@JonDisnard Thanks!.

Finally Made in USA

the Loopback feature will save you US$99 for Loopback software to livestream or teleconferencing.

I'm buying this.

is there a way to monitor output 3-4 on the headphones on motu m4

Extremly good information. I wonder why not 3.5mm input jacks are available. The whole world of synths and external gear in the meanwhile is 3.5 mm stereo jack/plug oriented. I know this is an issue for 99% of all usb audio interfaces in the world until today in 2022 with the exception of the TX-6 from Teenage engineering which has 6 stereo, means 12 channels in a 3.5mm hw format.

Thanks for your review of the Motu M2! Question please. I recently bought the Focusrite Scarlett 4i4 3rd Gen audio mixer for $229. Do you think the comparable Motu M4 mixer for $219 is "better" than the the Scarlett 4i4 in terms of feature set and audio quality? The Scarlett 4i4 does have a Loopback feature via the Focusrite Control app so I don't know if that makes any difference to you (the Scarlett 2i2 doesn't have that, I don't think). Also the Scarlett 4i4 has the "Air" feature. Anyway, I'm within the return policy period for my Scarlett purchase so I can exchange for the Motu M2 or M4 units. But unfortunately, both of those Motu mixers are out of stock and back ordered everywhere, so maybe this is a moot point? I'm using the Shure SM58 mics and the Audio Technica AT2005 mics (both dynamic mics) so I don't know if that makes any difference. But I notice if I crank up the gain dial on the Scarlett 4i4 mixer to maximum, there is positively a noticeable humming/hissing background noise. If I crank up the gain dial to maximum on the Motu mixer, will it produce the same amount of background humming/hissing noise compared to the Scarlett mixer? Your thoughts on this?

@dimitrisloufakis916

3 жыл бұрын

At this point, you're splitting hairs. The MOTU is a great interface, but so is the one you got. I think it is worth it for you to keep your Scarlett and start making music, rather than waiting a long time for something that's on backorder, because it *might* give you a slight edge. I am telling you right now that the difference you'll get is something that you won't be able to hear when you work with these. There are far more important upgrades you could do to your setup, rather than worrying about your interface, and that goes for everyone. Except f your interface is crap (but the Scarlett is most definitely not) As for your question regarding the hissing: Yes, any interface will be hissing if the gain is maxed out. At least for people like us, working from our bedroom. However, at max gain you will probably have more important issues. I doubt that your signal won't be clipping at that point

How does this compare to Audient and PreSonus?

For a Neumann TLM-103, which is a better fit... Scarlett solo 3rd gen or Motu M2? Thanks!

How about the A/D side? ESS Sabre32 Ultra as well? Pre's usable?

Thanks.

Hi Mitch how ya doing? long time no see! Great video well explained! The only thing wrong? next time give the product a quick wipe down to get all the styrofoam and dust off. "Presentation is everything" or so I'm told lol :)

I don't know what audio interface you are using to record your videos but that blows everything else out of the water. One other thing is I wished to see the Motu 4 in action with different settings but I haven't.

How is the software bundle package on these interfaces?

Nice review and thanks for it! I have a question, on the M4 are the input 3 and 4 always linked as a stereo pair or could they be used as 2 separate mono input?

@sweetwater

3 жыл бұрын

Hi, Paolo. Great question! You could use the M4 Line 3/4 inputs as mono or stereo. Let us know if we can help with anything else. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com

@PaoloMarelliGuitar

3 жыл бұрын

@@sweetwater thanks for the reply this is really helpful, I think I might go for this interface now

My old m-audio omni i/o interface had 2 simple and responsive light diode to indicate audio signal and clipping. I don't know why no one does that anymore, but I would have thought it'd be easier to do with LED. These visual display levels could be better for all I know.

@fredwinjeftha6166

Жыл бұрын

I8 I Mllnkkkmnmkooopkkkjjbn vcbgyuyhgvh

Are these like the 3rd generation Scarlett where they can go from USB-C to USB2?

@sweetwater

4 жыл бұрын

Hi, Jason. Thanks for reaching out with your question. You are exactly right. They will operate in a USB 2 port at USB 2 speeds. If you have any other questions about this interface or anything else, let me know! Riley Koenemann, Sweetwater Sales Engineer, (800) 222-4700 ext. 1226, Riley_Koenemann@sweetwater.com

For my M2, when plugged into the 1L input (XLR or instrument cable), the left channel's audio is significantly higher than the right channel's audio, no matter if 1) MON is not pressed, 2) MON is pressed, or 3) MON is held so there's a blue bar. How do I fix this? I use a Mac fyi.

@motuTV

4 жыл бұрын

Hey Jeremy, if you're comparing Inputs 1 and 2 with the same source of audio, make sure that the Gain knobs (levels) are set equally. If this continues to happen, I suggest contacting our tech support team for further assistance. motu.com/support

These are amazing. U bai.

So this will be powered by the ipad pro (USB-C) and function as expected? Or will it need an additional power source via a hub of some sort...

@motuTV

4 жыл бұрын

For iOS use, power is required via an adapter or hub. For iOS devices with a Lightning port, an Apple Lightning to USB3 Camera Adapter is required.

How would you say an audio interface like one of these compares to say, a zoom H5 or an H6? If you had to rank a MOTU M2 on a scale of 1-10, and then rank the H5, where would they be? I have a cheap behringer (~$90) at home but I find myself using the H5 for just about everything these days. However, I'm very new to this and don't know if that's silly or not.

@olafkliemt1145

4 жыл бұрын

MOTU 7, H5 5.

Is the input monitor mix worth the extra $70? Could't you add a gain plugin on the vocal track to adjust?

Wonder if it will work on a M1 MacBook Pro? As I understand, this can either be used for recording into a DAW or stand alone without the computer with an external USB C charger. What kind of power would the external charger require to use this stand alone? I wish they had built in the DC input for stand alone use into the unit itself so that one could have used it stand alone as well as keep a permanent connection to the DAW through the USB C port. Kind of like the MOTU 828MK3 Hybrid that I had some years back. This is the one of the main reasons preventing me from buying this. I do have Apogee Element 88 and 46 but those don't work with the M1 for now and the driver update is only expected in July-August from Apogee. Plus the Apogee Elements don't have a stand alone mode and have to be connected to the DAW always to get sound. That's one of the biggest drawbacks of the Apogee Element units in my view. What other dual purpose Audio Interfaces/ stand alone mixer combinations are available?

My old M-Audio Delta series interface finally gave up the ghost so looking for something to replace it. With the M2 could I listen to KZread vids and play along with a guitar running through a DAW at the same time?

The M4 is exactly what I'm looking for. Love the line ins!!! Made in the U.S.A....not Communist China!!!

I know these are desktop interfaces but I would love to get my M4 into my rack.

I'm having trouble with the Audient EVO 8. With WA-87 R2 LD condensor mic -- not getting full level even with preamp the maxed out The headphone level into my earbuds is low and the sound is full of hiss! Was thinking of returning for MOTU M2. Advice?

Do the 1/4 inch line-ins go straight to converters (no preamp circuit)? It has RCA outs...forgive my inexperience with these, can, say an FMR RNC get patched into this interface?

@sweetwater

4 жыл бұрын

Hello! Thank you for your interest! The M4 has a pair of line inputs that would go straight to the converters on the back of the unit, as well as some 1/4 inch line outputs that would be perfect for patching in an FMR RNC! If you've got other questions on how these awesome new MOTU interfaces will work in your studio, feel free to give us a call! Justin Sunday, Sweetwater Sales Engineer, (800) 222-4700 ext. 1966, Justin_Sunday@Sweetwater.com

So what can I plug into the 3rd and 4th input on the m4? The idea would be to use two mics up front and two (acoustic) guitars through the back. Is that doable straight up with how the interface is set up? otherwise I think I saw a comment somewhere where you would just have to put another preamp between your instrument and that line in. Any info would be helpful!

@sweetwater

4 жыл бұрын

Hi, Andy. Great question! The 3/4 inputs on the M4 are line level, meaning that the level on an acoustic guitar is going to be a little low going into them (depending on how hot the output on the acoustic guitar preamp is). Using a DI or preamp pedal before those inputs will help to solve this. Feel free to reach out if you would like to go into more detail on what is best for your needs. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com

Hi there ! I see that in the package a USB-C to USB-A cable is included. And I am wondering if I could use a USB-C to USB-C cable to use this sound card ? Since I would like to free up a USB-A port on my laptop when using this. Thanks !

@sweetwater

4 жыл бұрын

Hey there! Great question! This will absolutely work USB-C to USB-C, so you should have no problems there! I'd love to chat more about your setup if you'd like to give me a shout at the contact info below. Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com

Could I go M2>USB hub (via USB C-3.0 cable)>iPad Pro? I'm trying to avoid a silly dongle as well as maintain power delivery to the iPad itself... Thanks!

@sweetwater

4 жыл бұрын

Hey, Matt. Thanks for reaching out! In theory, there is no reason that shouldn't work. As long as the hub is a POWERED usb hub that can supply the needed electrical wattage output for the interface, you should be fine. Mickey Cushing, Sweetwater Sales Engineer, (800) 222-4700 ext. 3024, Mickey_Cushing@Sweetwater.com

Can someone recommend a Y-cable to use the M2 stand-alone and as a computer interface? However, an optional power supply would be nice.

@jjbailey01

4 жыл бұрын

As far as optional power supply goes, any USB powered device such as this can optionally be powered by any standard USB charger/power supply brick without being hooked up to a computer. There is absolutely no reason to need a dedicated power supply.

THANKS for this review!!!!!! I'm thinking about replacing my "old" Motu audio express with the M4 model, would I have the same audio quality? Do these new devices use the same preamps (or even better)?

@sweetwater

4 жыл бұрын

Hey, Michele! Great question! They are using their same fantastic preamps. However, their conversion has been improved, and, if I might add, they've done a fantastic job with it. I'd love to chat with you more to see if this is the right interface for you! Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com

@mikyncdm

4 жыл бұрын

@@sweetwater THANK YOU!!Ok, I will buy the m4 to replace the audio express :)

Hi, I'm António Filipe from Portugal I follow your channel since 2018, I love the tone as you do your reviews. I saw your review on the Motu M2 sound interface, the Shuer SM7B microphone with the Fethead applicator and ended up buying them. I connected the Shuer SM7B microphone (+ the fethead) and my Beyerdynamic DT-770 Pro 250 headphones to the Motu M2 sound interface, installed the driver, and was able to record and listen to Adobe Audition, however when I'm not recording (and even recording) no sound comes out of the headphones. What am I doing wrong? Shouldn't sound come out of the headphones at the time of recording? Thank you very much and continued success with your wonderful channel.

@motuTV

3 жыл бұрын

Hey António - it can depend on your DAW settings to hear playback during the recording process, but typically, you should be able to hear something through this headphone out. Please connect with our tech support team on the matter as soon as you can for assistance on the matter> motu.com/support

I really need to know where i can find something to explain how i can update the firmware on my motu M4, because the software they provide on their website does not detect my motu m4, only the basic quality software under motu m series, and with that software you do not have the firmware update option.

Can you use this on the 2020 ipad pro with two mics for a podcast?

@motuTV

3 жыл бұрын

Of course!

Is this good and compatible with gig performer,?

My iPad has only got a lighting port, will this unit work ok if I get a lighting to USB c cable...will it get enough power from the iPad ?

@sweetwater

4 жыл бұрын

Hey, Stephen! The iPad can't power it if you plug it in directly, but you can using this adapter: www.sweetwater.com/store/detail/LightCamUSB3--apple-lightning-to-usb-3-camera-adapter If you have any questions, feel free to reach out. Thanks! Connor Smith, Sweetwater Sales Engineer, (800) 222 4700 ext. 1793, connor_smith@sweetwater.com

Will this connect directly into my MacBook m1 2021 14inch ?

@sweetwater

Жыл бұрын

Hey there! Yes, any of those interfaces will certainly plug straight into your MacBook M1. The interface comes with a standard USB A cable, so you may have to get a USB C to USB C cable in order to properly connect into that newer Macbook. I hope this helps! Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com

Will the MOTU work with OS 10.9.5? Thats the deciding factor on whether or not I'll get it. Otherwise, I'll get the Audient ID14 because it supports 10.9.5.. Really wanted this interface too but don't think it supports my OS (I record my music on an older OS because quite a few of my really old plugins aren't supported by the latest OS).

@motuTV

4 жыл бұрын

Our driver for this device is suited for macOS 10.11 or higher. If you use USB Class-Compliancy for Mac, it should work on 10.9.5!

Would I be able to plug this into an iPad (with lightning connection w/USB Camera dongle) and record a live stream from Skype and my own out of XLR mic on 2 separate tracks?

@sweetwater

4 жыл бұрын

Hello, Peter! Although the M4 is compatible with iOS, what you're looking to do is different. Give us a call to talk about the correct rig in more detail. Thanks for the interest! Jorge Padilla, Sweetwater Sales Engineer, (800) 222-4700 ext. 1731, Jorge Padilla@sweetwater.com

It is preferable to have a separate and dedicated power input.

Can i connect the m4 to the American Audio DB display mkII?

@motuTV

4 жыл бұрын

Sure can!

what kind of headphones should I buy for these units? 32, 80 or 250 ohms? :)

@sweetwater

3 жыл бұрын

Hello, Pablo! The headphone amp aboard the M4 and M2 interfaces will support 32 ohm and 80 ohm headphones no problem, but an additional higher gain headphone amp is recommended for 250 ohm headphones. Thanks for the interest! Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com

Is there advantage for using an interface simply for monitoring my edits’ audio (through headphones)? I don’t have a need for recording through it, just yet anyway. LoL Glad I found this option to consider before making a purchase.

@sweetwater

2 жыл бұрын

Hi, Jeff! Thanks for your interest. Although interfaces like these are primarily used for recording, there would be a couple benefits to using one purely for monitoring and editing: the digital-to-analog conversion is likely to be higher quality than your computer's built-in sound card, and the headphone amp built into the interface is also probably more powerful than the headphone jack on your computer. The output level meter might also be useful to make sure you are not clipping at all. Hope this helps a bit, and feel free to contact me directly with any further questions! Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com

Like it.

What is the best audio interface Motu m2 or Audient id14? Please help me to choose! 🙏

@akashr1370

4 жыл бұрын

M2 for better DAC... ID4 for better pre.... M2 for overall performance including low latency

@Taras_Melnyk

4 жыл бұрын

@@akashr1370 Thanks, I already bought the M2 a month ago

Do you really need the mix knob on the M4 to hear currently recorded DAW tracks while you are adding new ones?

@motuTV

3 жыл бұрын

Not necessarily if you're monitoring an input signal through your DAW. The mix knob blends the direct input signal vs computer audio if you were monitoring the input using the MON buttons

Which one do you think is best for MOTU M2or FOCUSRITE Scarlett 2i2 3 rd gen

@mikeexits

4 жыл бұрын

Seems the MOTU is better.

I've just bought the m4 and for 2 days now I can't get it to work. When I play back music from my daw or KZread on the headphones and it all sounds like it's going through tonnes of reverb and flange and I can't hear anything clearly. I'm using windows 11 and have installed the latest firmware. I've tried all the buffer settings and other things too but still can't get it to work. I did notice though when I playback the windows test sounds, they played back perfectly and clear. Any ideas anyone?

Will the loopback function offer the output of a 2ch downmix of the computer (coming in through USB) and the other channels (coming in through XLR)? Or do I have to mix them in the DAW software?

@sweetwater

4 жыл бұрын

Hey, Christopher! You have the option of mixing those tracks in a DAW, but you don't have to. You can mix with live inputs and disk tracks if you so choose inside of your DAW. I'd love to chat with you more about the process if you'd like to give me a shout at the contact info below. Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com

@sybo59

7 ай бұрын

@@sweetwaterThis is honestly amazing customer service.

do you have apollo usb mk2?

Great video, I am interested in the MOTU M4, but how do I connect 2 mics + 2 instruments (input 1-4) at the same time?

@sweetwater

3 жыл бұрын

Hello, Michael. Thanks for reaching out, it's Mickey from Sweetwater! The MOTU M4 has two mic or instrument level inputs on the front, and two line level inputs on the back. If you are using a keyboard, synth, or drum machine, you should be able to connect without preamplification. Alternatively, you can use a two channel mics preamp and connect their line level outputs to the back of the M4 to get two additional channels of mic or instrument input. Give us a call with any questions! Mickey Cushing, Sweetwater Sales Engineer, (800) 222-4700 ext. 3024, Mickey_Cushing@Sweetwater.com

@Miko1963

3 жыл бұрын

@@sweetwater Thanks for the help, Mickey! I am not in the US though. Do you have an intl number?

When plugging in my SE2200 condensor mic and pressing V48, light goes out. Have tried different things, including switching out MOTU m4. Still no success.

Cool stuff. Now get it in stock. God bless American made goods.

Hello! Do you Guys think it’s compatible with iPad Pro 2018 equipped with USB c port ? Should I expect any issues? All the best.

@motuTV

4 жыл бұрын

It's definitely compatible! Check out this link for further information about setup and other recommendations. motu.com/techsupport/technotes/m-series-ios-power

The input-monitor knob, Is It possible to control on the m2 via software?

@sweetwater

4 жыл бұрын

Hey, Georgia! I'm not certain I 100% understand the question, but I definitely want to get you some answers. Are you asking whether or not you can use software to control the parameters (like gain control, output volume, etc) on the hardware? Give me a shout at the contact info below and we can discuss your needs further. Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com

@jjbailey01

4 жыл бұрын

@@sweetwater I think the question is do the pots/encoders have hard stops, and if so, are they motor controlled by the DAW. Or do the pots/encoders lack hard stops, so are free to turn any number of times? This would negate the need to motor control the knobs.

Should i go for the m4 just for the direct monitoring mix knob?? Or can that thing be done in the software itself for the m2, I'm confused between m2 and m4,and the maybe the mix knob is the deciding factor,would love to know your opinion

@sweetwater

3 жыл бұрын

Hi, Professor Lethal. Great question! The most significant difference between the two interfaces is the extra two inputs and outputs on the M4. The input/playback mix knob is a factor too, but not as important as the inputs/outputs. Feel free to reach out with any other questions. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com

@uhhkonichiwa...

3 жыл бұрын

@@sweetwater thank you, gonna get the M4 now

Loop back feature? Is it like virtual channels in apollo console?

@motuTV

4 жыл бұрын

Yes!

HI, The M4 has the "Input/Playback" mix knob, as the M2 doesn't have the knob, is it controlled/adjusted in software on your PC?

@sweetwater

3 жыл бұрын

Hi, Stephen. Great question! Though the M2 does have input monitoring capabilities, it does not have the ability to blend the input signal with the DAW playback like the M4. More on that here: kzread.info/dash/bejne/eaKqyLCxYretdtY.html Thanks for the interest! Cody Kraus, Sweetwater Sales Engineer, (800) 222-4700 ext. 1766, cody_kraus@sweetwater.com

@BenjaminGib

3 жыл бұрын

I had the same question, thank you for asking and thanks Sweetwater for answering. 🙌🏼

Question about the M4: How do I regulate the gain for the two line input channels on the back? I only see knobs to regulate gain for the two combination inputs, but not for the two line ins in the back...

@sweetwater

3 жыл бұрын

Hi, thanks for your interest! The line inputs on the M4 do not have any gain controls. You would control the level from the sound source you have plugged into them, i.e. a keyboard or mixer with line-level outputs. For more details and specs, you can check out MOTU's user guide at this link: cdn-data.motu.com/manuals/usb-c-audio/M_Series_User_Guide.pdf Hope this helps, and feel free to reach out to me directly with further questions! Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com

@Chretze

3 жыл бұрын

@@sweetwater Thanks for the input! In that case, I'd need a different interface. My issue is, I'm trying to connect two guitars, a bass and a mic at the same time, and all those instruments have different pre-amps installed (some active and passive pick-ups on the guitars) so they all need different gain settings and monitoring in the interface... I was hoping I could use the M4 for it because the specs are legendary ;) Is there a comparable device out there you know of that could do this job? I'm not aware if Motu produces something with 4 inputs that each have gain monitoring, which is a pity... Something like the Scarlett 18i8 perhaps?

@sweetwater

3 жыл бұрын

@@Chretze Hey Chretze, thanks for the reply. I got your email as well and I'm sending a more detailed response there, too. The short answer is: anytime you're connecting a guitar or bass directly to your interface, you really want to use an input that's designed for an instrument-level signal. However, it is possible to use external preamps or DI's to get an instrument or mic into a line-level input. The 18i8 is a good option, but it also just has two instrument level inputs - the other two preamps are mic/line only and don't have the correct impedance for guitars. We'll pick this up over email! Thanks again! Caleb Lowrey, Sweetwater Sales Engineer, (800) 222-4700 ext. 1620, caleb_lowrey@sweetwater.com

2.5ms of latency round-trip, but at what settings? What is the sample rate for that latency result?

@motuTV

3 жыл бұрын

96khz at 32 samples per buffer

How well does the M Series work with Logic Pro X...would you recommend it?

@sweetwater

3 жыл бұрын

Definitely! The M2 and M4 are both great interfaces, especially for the price. They work really well with Logic and are also compatible with Big Sur and the new M1 Macs. Let me know if you have any other questions! Connor Smith, Sweetwater Sales Engineer, (800) 222-4700 ext. 1793, connor_smith@sweetwater.com

Is it possible to toggle monitoring between stereo and mono to check your mix in mono.?

@sweetwater

4 жыл бұрын

Hi, Anthony. Great question! While there is no button on the interface to quickly switch between stereo and mono, that is something that can be switched fairly quickly in your DAW. If you need help setting that up, feel free to give us a call. Thanks! Jason Filloramo, Sweetwater Sales Engineer, (800) 222-4700 ext. 1281, Jason_Filloramo@sweetwater.com

@anthonysilva5312

4 жыл бұрын

Sweetwater thanks Jason. I use abbleton live v9 - any advice?

Hey there! Will this interface work correctly and offer all its low latency advantages with the Acoustica Mixcraft DAW? Thanks!!!

@motuTV

4 жыл бұрын

Absolutely! With our M Series drivers installed for these devices, both deliver an ultra-low, class-leading speed of 2.5 ms Round Trip Latency (at 96 kHz with a 32 sample buffer). You'll be able to use this in Mixcraft no problem.

@dantearturorodriguezcamach2613

4 жыл бұрын

@@motuTVAwesome! Me want one soooooo bad! Any way to buy these in Mexico? Was thinking of buying through sweetwater, but not sure if they will ship internationally in these times of madness. Thank you for responding and congrats on this amazing amazing unit. Regards!

@motuTV

4 жыл бұрын

@@dantearturorodriguezcamach2613 This may be helpful to you! motu.com/other/distributors.html

What is being monitored on headphones on the m4? Is it out 1-2 or 3-4 or is it switchable?

@motuTV

4 жыл бұрын

Out 1-2, not switchable

@undonerocket342

4 жыл бұрын

@@motuTV So I guess out 3-4 could be used to process audio through outboard, and recorded back in via the line ins?

Can this connect to an iPad Pro with the USB C cable?

@sweetwater

4 жыл бұрын

Hey, Nathaniel! Great question! Yes, you absolutely can use an iPad with this. It's class-compliant, so super easy to get up and running. I'd love to chat more with you about it, if you'd like to give me a shout at the contact info below. Rock on! 🎶🤘 Cassie O'Hanlon, Sweetwater Sales Engineer, (800) 222-4700 ext. 3020, cassie_ohanlon@sweetwater.com

Would this be a good first audio interface??

@sweetwater

4 жыл бұрын

Hey, Giovone! Either of these would be a great starting point for a recording setup. We just need to make sure it has the right inputs and outputs for what you want to accomplish. Feel free to reach out if I can help. Thanks for your question! Connor Smith, Sweetwater Sales Engineer, (800) 222 4700 ext. 1793, connor_smith@sweetwater.com

And the sound tests?