That's the ultimate fishing mobile that will get you everywhere in a little creek

That is one adventurous vid mate! Great job on the build, that thing sounds like 250cc two stroke racing machine.

@FishingEasternCapeSA

6 ай бұрын

Lekker bud glad you enjoyed it. Check out my other channel dedicated to this bicycle if you like: www.youtube.com/@MotorizedBicycle1

@demonic2534

5 ай бұрын

@@FishingEasternCapeSAhow much is jackshaft an gears so u can shift

@FishingEasternCapeSA

5 ай бұрын

​@demonic2534 unfortunately cant buy anymore. Sickbikeparts.com closed for good. Future builds need full custom fabrication.

love the build nice work!

Thats a super nice bike and sounds just as good. Great work.....

@FishingEasternCapeSA

Жыл бұрын

thanks bud

Dude that build is a beauty!

@FishingEasternCapeSA

4 ай бұрын

Thanks bud. Check out my other channel dedicated to this motorized bicycle youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH

Thanks for the ride.

Thanks for the ride. Godspeed

Great video bro you got lucky that crash wasn’t worse

@FishingEasternCapeSA

2 жыл бұрын

For sure man! I thank God for His hand in my life, always.

@Littleevil9975

2 жыл бұрын

Definitely bro I build bikes to there a blast stay safe bro

@FishingEasternCapeSA

2 жыл бұрын

@@Littleevil9975 thanks, you too ☺️

@Littleevil9975

2 жыл бұрын

Welcome bro and will do

Started the video with my riding nightmare. Good 👍

Great video close call great job on the bike

@FishingEasternCapeSA

2 жыл бұрын

Thanks buddy!

Dam that bike is sick lucky you ain't get hurt ot mess your bike io when I got hit completely ruined my front wheel

I am busy creating a new channel which will be dedicated to motorized bicycles. Mods, upgrades, ride alone videos. Subscribe so long if you are interested. Videos will come in the near future. youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH

Nice ride out...thank God you ok bud

@FishingEasternCapeSA

2 жыл бұрын

For sure! It could have been bad 🙏🏼🙏🏼🙏🏼

That bike is just about perfect. Great job! Ant work done to the internals?

@FishingEasternCapeSA

2 жыл бұрын

Upgraded sealed bearing in the clutch, replaced all those loose ball bearing. Everything else is basically bolt on parts. Standard PK80 crank.

You have good brake thanks god

Great video that cylinder is pretty good! Gotta pay close attention to everyone else out there. Happy new year bud 🚴💨💨💨

@FishingEasternCapeSA

2 жыл бұрын

Thanks. Happy New year to you too! Yes the flacon 911 is really awesome. Proper quality.

I am a fan of this type of videos of motorized bicycle with jack shaft and to improve it is a video driving as it is due to and something else scared the truck hahaha

I got the same setup, but with a ported + balanced true 85cc (110cc). Pwk 21, shift kit, mz65 clone (nasty jack). I'm just in the final stages of assembly. After watching this video, now I can't wait to ride it. 😍 What is the cc of the pk80?

@FishingEasternCapeSA

11 ай бұрын

That's great. You are going to love it. I have the falcon 911 nikasl plated cylinder. I can't remember what CC it is. I think it's around 90cc but I may be wrong.

I need that bike damn

Muito top

Would that installation of changes wear out the bike chain more? And how often will you need to change it?

@FishingEasternCapeSA

9 ай бұрын

i use a kmc ebike chain. Haven't needed to replace it yet and still not showing much wear. They are very strong

Where did you get that custom piston sleeve with the reed valve built in?

@FishingEasternCapeSA

2 жыл бұрын

Ebay. Its a Falcon 911. Made in brasil. High quality nikasil plated cylinder.

Does one need a license

Nice ride bro 🔥💨💨💪 where did you get that silencer for the MZ pipe ? Also Did the silencer slip right into the MZ pipe or you had to do some modifications?

@FishingEasternCapeSA

Жыл бұрын

It's a universal carbon canister from aliexpress. Made a stainless adapter plate to fit it to the mz pipe. Both silencer and mz are 22mm if I remember correctly.

@FishingEasternCapeSA

Жыл бұрын

And I shortened and repacked the silencer. New staines steel rivets and better packing.

How many kms does it pull ? ? ? { if you run a smart phone app, start a trip meter , it will give you top speed , average speed , ect) Sweet ride and very impressive disc brake stopping power👌2:39

@FishingEasternCapeSA

7 ай бұрын

I will have to test one day with an app but my buddy cruised along side me and i was doing around 85km/h on a flat before i added the falcon 911 and bigger intake and carb. So it should get over 90km/h on a flat surface, but thats really too fast for a bicycle. Check out my other channel dedicated to this bicycle. youtube.com/@MotorizedBicycle1?si=zkn-Hxvueg4D_BfH

Seems nice, how many kilometers can it do before needing a refill?

@FishingEasternCapeSA

Жыл бұрын

haven't measured yet but obviously will vary a lot depending on what speed im doing

Where ya get the tank decals?

@FishingEasternCapeSA

2 жыл бұрын

I made them, cut the out of vinyl and used stickers I had from a drone shop called flying robot.

I need to know what engine this is that allows u to use the bikes gears

@FishingEasternCapeSA

24 күн бұрын

Sickbikeparts jackshaft kit on a pk80 motor with a LOT of upgrades and custom work .

Can you tell me how to route that carb? I'm confused what those 2 brass nipples on opposite ends are for.... leave it alone? Plug it up? Route hoses from it?

@FishingEasternCapeSA

2 жыл бұрын

i think you may be speaking about the power jet circuit. The two brass nibble need to be piped together. Google OKO 21mm diagram and you will find a description.

@tonykartracer8032

2 жыл бұрын

@@FishingEasternCapeSA OK, how do I make the throttle cable fit? It isn't long enough to stick it in the slide, even if the spring is compressed entirely! Even if I'm able to fit it in, wouldn't the spring be too compressed to wear I cant even give it any throttle input? Did you cut the spring?

@tonykartracer8032

2 жыл бұрын

UPDATE : I took off the cable at the throttle tube side and fitted the carb end first.... but then when I went back to try and install the cable at the throttle tube, it's too short now. How do people with oversized carbs make the cable work?

@FishingEasternCapeSA

2 жыл бұрын

@@tonykartracer8032 i got a cable made to custom length. We have a local cable repair shop. My cable was also the incorrect length. I think mine was too long if I recall correctly. Just as long as you are completely adjusting all adjustments point all the way in, if you still can't get it to on then make the core a bit longer.

@tonykartracer8032

2 жыл бұрын

@@FishingEasternCapeSA Was wondering how everyone with aftermarket oversized carbs got their cable to work properly.... I suppose everyone had to have their custom made to length. Just thought there was an easier solution that I missed out on. Anyway, thanks for the help man, I appreciate it!

What kit did you buy?

@FishingEasternCapeSA

11 ай бұрын

It's a sick bike parts kit.

Sounds great, what engine

@FishingEasternCapeSA

2 жыл бұрын

Thanks Jeff. It is based on a PK80. Major mods are described in the video.

😮

Sounds nice seems fast .. falcon911???

@FishingEasternCapeSA

2 жыл бұрын

yes falcon 911. really good cylinders

@mozezcen-valley7555

2 жыл бұрын

@@FishingEasternCapeSA wen they restock on Ebay I plan on getting 1 ...sold out reed type ..like urs rn

How much is jackshadt kit with gears

@FishingEasternCapeSA

5 ай бұрын

Cant buy them anymore. Sickbikeparts.com closed down. You have to custom fabricate now.

Top speed and mpg?

@FishingEasternCapeSA

Жыл бұрын

90km/h on a flat. Never measured fuel consumption. Its not light on fuel though.

What is your top speed ? cause it looks like your going at least 40mph

Are you using stock clutch pads? 👍

@FishingEasternCapeSA

26 күн бұрын

Im a using slightly upgraded Chinese pads with a custom updraded spring. Much stronger spring.

@HueMongussD

26 күн бұрын

@@FishingEasternCapeSA the spring sounds like a good idea. I tried those black rubber pads with white string in them. They suck. They look like they're made from old tire rubber. Btw... The bike sounds amazing! 👍✌️

@FishingEasternCapeSA

26 күн бұрын

I use the pink Chinese pads. Spring is a must as it kept slipping. I also cut grooves in the clutch pressure plate, similar to what you see with car clutches. It has never slipped since but I think the spring is what helped the most.

@HueMongussD

26 күн бұрын

That's for the info

I saw that from a mile away...

That exhaust has to burn the piss out of you all the time* and what is going on with that clutch box? I've never seen one with an exterior cover attachment that seems to create a chain shaft extension adapter.. wHaT iS tHaT caLleD {{I saw your jackshaft video}}

@FishingEasternCapeSA

7 ай бұрын

The cover is just a guard for the jackshaft sprocket. The exhaust doesn't get hot enough to burn. I can touch it with my hand even after a long ride on a hot day. So never had an issue.

Luckily you have disc brakes that crash couldve been way worse 😅

@FishingEasternCapeSA

6 ай бұрын

Very true!

2:39 What hapen You not see the pickup truck come out

@FishingEasternCapeSA

2 жыл бұрын

I thought that the bakkie (truck) was parked in the driveway and I didn't see anyone in the vehicle. That's was really a miracle for me. I don't know how I stopped so fast.

@Adalbertomatos_

2 жыл бұрын

@@FishingEasternCapeSA adrenaline make You stop fast

@JO3BID3N-is-a-P3D0

9 ай бұрын

it was parked halfway in the driveway

I would have handle that white truck deal completely different.

@FishingEasternCapeSA

2 жыл бұрын

Well we have to forgive and forget brother. God determines the day we die 🙏🏼 can't live this life in conflict. Peace and love in Jesus.

@genem.2487

2 жыл бұрын

@@FishingEasternCapeSA Amen.

Riding on the wrong side of the road come on dude how did you run into that truck wtf😂

@FishingEasternCapeSA

11 ай бұрын

It's South Africa so it's the correct side of the road. I did see the bakkie (truck) but I thought it was parked. I didn't run into the truck, it pulled out in front of me. It's always easy to judge when you sit there watching the footage afterwards, but you make incorrect assumptions.

It's a Ripper

Bro i would kill for that bike

@FishingEasternCapeSA

2 жыл бұрын

You can make one 😊

You could’ve easily went around the truck.

@FishingEasternCapeSA

Жыл бұрын

Sure bud 😆

Death mobile

@FishingEasternCapeSA

2 жыл бұрын

They are dangerous yes but I suppose all bikes are.

You could avoided that crash if you were paying attention

@FishingEasternCapeSA

6 ай бұрын

I thought the bakkie was parked in the driveway with nobody in it.

@logancurran

6 ай бұрын

true but the driver should have looked