Motorguide Xi3 trolling motor | Pinpoint Install
Фильм және анимация
In this video James shows how to install the Pinpoint GPS system on a non gps Motorguide Xi3 kayak motor.
-----------------------------Please Hit The Subscribe Button-----------------
Follow us on Facebook - / oneobjectivebf
Follow us on Instagram - / oneobjectivebf
OneObjective Merchandise - www.oneobjectivebf.com/store/...
CupCaddie - www.oneobjectivebf.com/store/...
Bioenno Batterys - www.bioennopower.com/
Native Watercraft - nativewatercraft.com/
YakAttack - www.yakattack.us/
Bonafide Kayaks - bonafidekayaks.com/
AccuCull - www.accucull.com/
Missile Baits - missilebaits.com/
Falcon Rods - shop.falconrods.com/
www.oneobjectivebf.com/
kayak fishing setup native slayer 12.5 max trolling motor
#kayakfishing#kayakmotorsetup#motorguidexi3#motorguide#xi3
Пікірлер: 47
I was sponsored by PinPoint trolling motors before Motorguide bought them. Truly they were way ahead. I had creek track, contour tracking, depth track along with digital read outs.
@OneObjective
Жыл бұрын
Dang that is nice
This video is perctly on point I purchased a SS107 and the Motoguide XI3 without pin point GPS.
Awesome products still hoping for a bow mount for a topwater/sportsman pdl!
So happy I found this video! Thanks for doing this video! We have a new Tahoe 1950 with 3 fish finders (check out that video on our channel!). We added everything, but we were missing the Pinpoint!
Can you do a video of your setup for the trolling motor.
FYI ... I replaced my old Minn Kota Power Drive with a Motor Guide Xi3. My main concern was modifying the Minn Kota quick release mount to fit the Xi3. Didn't want to drill new holes in my boat. No problem. Xi3 fits perfectly on Minn kota quick release mount. Fish On!
@Nazman06
Жыл бұрын
I am thinking of buying the MG Xi3..How do you like it so far?
@robertbennett6418
Жыл бұрын
I don't. It did fit using the quick release from my old Minn Kita. Problem was it didn't work. Had on the water twice. Even talked with MG on water and could not get it to work completely. Did like what did work so when Bass Pro took it back I ordered another. It arrived broken in the shipping container. Bass Pro took it back also. Done with MG. Paid a bit more for a Minn Kota but it works Super. Bass Pro Shop was awesome. If you go with MG make sure you can return it. I have no faith in their product. Good Luck.
@robertbennett6418
Жыл бұрын
Also ... It would have taken months to get repaired. Be careful.
How do you deploy that when on the water? Does it have trim function so you can raise and lower it?
How well is spot lock working for you? I've seen feedback that's shows it doesn't work well and then I've seen feedback that shows it does.
Do you know if the new motor guide xi3 with the 36 inch shaft come with the pinpoint and gps already installed on unit. I currently have the Garmin live scope and Garmin graph. Do you guys have a video on how to set up motor guide to work with Garmin graph thanks for your reply in advance. Also I like the way you guys have your hobie pro angler 14 set up. That is what I’m currently running Thanks Randy
Can this motor be used for autonomous boat for a trip from Japan to Canada? Do the waypoints have a distance limitation?
Where do you buy that pinpoint? We want that!
How did y’all extend the top bar on the trailer please
Just wondering if you can tell me where you got the plug for your trolling motor and thing you mounted into the hull of that Slayer Max
@OneObjective
2 жыл бұрын
OneObjectivebf@gmail.com and if you don’t see what you are look for give use a call
Where can I get a bow mount for my ATAK 120
So is it when I buy the Xi3 55lb 36" Kayak With Pinpoint GPS then I don’t have to do it right. Everything is included?
@OneObjective
2 жыл бұрын
That’s right if you buy it with pin point it’s already installed
What fishfinder with GPS can I install for the pinpoint?
Do you have to calibrate it every time you disconnect the battery or just a one time thing
@OneObjective
Жыл бұрын
Just the first time
How much does a Xi3 without the pinpoint gps?
Is that a 45lb or 55lb thrust? Thanks !
@OneObjective
3 жыл бұрын
55lbs
Is this motor guide the regular one without gps? Then you added gps pinpoint to it .
@OneObjective
2 жыл бұрын
Yep
What is the purpose of the cable connector that you left sticking out of the base?
@OneObjective
Жыл бұрын
That’s for the cable to connect your graph to. You will need the nema cable
@jim62367
Жыл бұрын
@@OneObjective Thanks! I am not sure though, since the PinPoint system is now installed, why I would need to hook up my graph/GPS to it. What would that do if I can already anchor and such using PinPoint? I'm sorry, this is all new to me and I literally cannot find information for this unit anywhere else.
is there a benefit to doing this instead of just buying the one with GPS built in?
@OneObjective
3 жыл бұрын
There is no benefit to it. it’s just hard to get them with gps and easier right now to do it this way
@diyertime
3 жыл бұрын
I bought an xi3 and it came installed. It looks exactly like this installation so I don't think that there's any difference.
Does the "basic" version of the Xi3 at 859usd$ have the spotlock
@nealecole8768
Жыл бұрын
No
I need a trolling motor bracket for a motor guide XI3 for my 2014 jackson big rig can y’all build Me one
@OneObjective
2 жыл бұрын
Where are you located?
What size battery are you running?
@OneObjective
3 жыл бұрын
80amp
excuse the stupidity, what is that cord hanging out in the front for? a pedal?
@OneObjective
3 жыл бұрын
It’s so you can hook your fishfinder to it for GPS
@tbonekelley
2 жыл бұрын
Will anchor still work without hooking it to your fish finder?
@fishmandan
2 жыл бұрын
@@tbonekelley Yes Anchor lock works using the pinpoint. You can then network to a Lowrance finder to allow you to run with the finder and also to select a waypoint and it will auto steer to that point. The network also will show the power percentage being used and the heading when on auto steer.
@tbonekelley
2 жыл бұрын
Thank you
@truck2041
2 жыл бұрын
What would be needed to add to a Lowrance elite fs