Good job, I would recommend to use a syringe to draw up all the old fluid, start pumping new fluid from the start.

The best way to do it is to use a syringe and empty most of it out from the reservoir and then refill with new fluid. That way you don;t have to pump out the reservoir through the system. It will save you a lot of time and new brake fluid. Basically, your chasing the old fluid out of the lines with new fluid right from the start instead of chasing old fluid with more old fluid. EDIT: I see you did use the syringe method. 👍 PS Use a black Sharpie to cover that scratch on your left wheel. It will blend it in until you forget it’s there. 👍

@Motorcycology

2 жыл бұрын

I agree, the syringe method is the best way and for sure, next time when I do the front wheel, I'll use the syringe method. Good idea about the Sharpie too, I'll do that. The scratch was made by me when I replaced the rear tire. Super hard, even with the right rim protectors to not scratch the paint. The rear tires was a mf to get on lol.

@Bous123

11 ай бұрын

If you use the syringe and top the fluid out from the reservoir could you still get all the old fluid out from the system beneath?

That bike is super clean, you could put it in a museum.

@Motorcycology

2 жыл бұрын

Thanks so much. I use it a lot too, but try really hard to use it only on dry days. That said, I've been stuck outside on rainy days or thunderstorms with it as well. Cleaning the bike after a storm is no fun lol.

Thank you for showing how to change and bleed the brake fluid out of brake system. Step by step. Thank you sir

Great vid! I will give it a try on my GSXR-6, much appreciated!

@Motorcycology

Жыл бұрын

Have fun! Easier than you would think.

Loved the video. Never knew how easy it was I always paid for this.

Thanks for the video, easy to follow and great filming. 👌

@Motorcycology

7 ай бұрын

Thanks . Early in 2024 I'll be taking the wheels off the GSXR and then removing the tired from the rims, balancing and reinstallation. It's relatively easy to do and saves time and $$ from taking it in to a dhap.to get the tires changed. Thanks for watching and for the comment . J

Man your video helped a lot, specially with the links you provided. Very helpful. Thanks man !!!!👏🏻

@Motorcycology

11 ай бұрын

Glad it helped! Thanks for watching . Was just out my bike this afternoon! Enjoy your ride! J

Nice work. Unfortunately, now I have to do mine. Thanks for the tips.

@Motorcycology

Жыл бұрын

Thanks for watching. I'm getting ready to film the front and back tire change process. Thank you for your comment. J

Nice detailed video! Seems easy enough! Thanks for Sharing! & not using time lapse/ other weird edits& sfx like some of the other channels do! Just subscribed too!

@Motorcycology

Жыл бұрын

Glad it was helpful! Good observation about the time lapse videos. Sometimes I do speed up routine things like cleaning and painting in my videos, otherwise the videos would be 1.5 hours long. I show the time lapse to show that I did the work. I usually don't time lapse the technical work. J

should I definitely do the right caliper first? Many thanks

why didn't you take the old brake fluid from reservoir before you start?

@Motorcycology

Жыл бұрын

Good point, and in retrospect, I'll do that next time.

Do I need that hose or can I just let it bleed out when pressing the brake