The simplest and most reliable carburetor on the planet, from 1957 till about 1985, along with its shorter lived big brother, the 4100 4barrel. That little rubber piece behind the accelerater pump is actually called an "Elastomer" valve, in Fords lingo, the earlier ones had a check ball. Through the years, these carburetors had 4or5 different types of choke unloaders, with the vacuum pull-off unit on this one being the final design, some later ones also had a two stage power valve, and I remember they made color coded power valves, different valves for different altitudes. Back in the good ole days lol. Just a little trivia

I just rebuilt my carb last weekend, wish i could have seen this video first! 😆 I have a 78, identical to your truck.

Another great video today Good information and content

Love the Alaska windshield. :)

Probably my new favorite of your fleet that thing is awesome

When doing the final tune, I try to use the Vacuum gauge. Hey, you did a great job on the rebuild. I'm from the "Carburetor age" that's all we had until about 1990. Thanks for the video, I enjoyed it!

I just picked up a '70 F250, also in Alaska. I will be following your progress with this truck.

Another vote for the longer format.

Oh Yeah Brother - another successful mission accomplished by 'The Can-Do Man'! I love how you took off all the smog garbage and got 'er nice and tidy. That's how I like to see it! Can't wait for the next!!

Much appreciate the longer videos sir!

Nice tutorial on the carburetor rebuild, there were a couple of pieces that didn't get clearly shown what they were or where they went exactly but overall... Good job... There's a rumor that there are two unbroken windshields in Alaska but nobody has seen them or knows where they are.😁 Best Wishes to You and Your Family Austin.

One of my favorite trucks. Most likely you will get better fuel mileage. Great video

Hey , I've been following your channel for a little while now & love the content! Your vids are super informative & the way you go about explaining everything as you go is awesome. Always looking for that next new vid update ✌

@giggiddy

4 ай бұрын

I second that sir!!!😊

Great work. Looks and sounds so much better 👍👏

That truck is sweet!

Thanks, Jack, RI, USA

Accelerator Pump ... When I got "Rambo" my 55 Dodge Stake Truck somebody had put a 1 barrel tractor carb on the 1st gen hemi. Talk about hard to start and crappy acceleration. Got lucky and found a NOS 2bl with accelerator pump. Now it starts easy and that 1st gen winds right up and is fun to drive. Cheers Austin. 👊😎👍

I lived in Anchorage in the nineties and to say that passing a emission test was a test to a mans tolerance of patience.... if anything was removed or bypassed, it failed and no tags.. not sure if that still happens but if it does, we do not have to have all of the emissions equipment as long as its not in Anchorage as its home. All the stuff removed is a nightmare to replace

BYA, nice carb tutorial! Glad you mentioned throttle shaft wear causing vacuum leaks! Most re-man carbs for sale nowadays are not drilled and re-bushed so check for play before accepting them. Your carb may be in better shape so a good kit could result in a better repair for less dinero! Cheers!

Thank you

Just for anyone who might care. I’m running 2 china knockoffs on 2 of my truck. They have ran flawlessly, 1 for over 2 years and the other almost a year. Your results may vary but 50 bucks versus 300. It’s worth the gamble. Both of my originals couldn’t be rebuilt because of throttle shaft has excessive slack. Well they can be rebuilt but not by me and gets expensive. I gambled on the china knockoffs and won both times. Again your results may vary

@nickolasedmunds

3 күн бұрын

China carbs work because the float is so high. Once you know better than that, You have to get into jetting it because if the float level is corrected your problem will be a very lean off choke cruising. China carbs have small jets and the float level is almost incorrect every time. No carb is universal when it comes to jetting out of the box typically. I got a V6 and even with #48 jets it didn't work well missing hard when correctly adjusting the float. I tried the factory 50 jets the feedback carb different float level much higher, Now I'm going to a #52 jet for cruise and I know a #55 is too rich I tried it once. Now I know when I switch to Holly I'll be running a #53 jet possibly.

I've got the same carb on my 1986 Wagoneer - and actually the same rebuild kit that I need to do. Good stuff as always.

Great stuff. Yeah theres a lot of that emissions crap on the Ford couriers. Seem like great/fun little mini trucks.

Needs a 4 barrel and a mild performance manifold. Might as well do a valve job and a little porting. And if you do that, a new cam would really wake that old motor up. Come to think of it, some pop-up pistons would help too, raise the compression a bit. And if you do that, might as well upgrade the rods...

Гарна робота, двигун шепоче!👍

Cool truck. Glad you got rid of most of that emission junk. Just dragged motors down.

Nice job , sounds good 👍👍🇺🇲

I really enjoyed this video. Lots of interesting learning. The time spent on this video is great. Please keep making these videos the same time long. Thank you for sharing. Looking forward to your next project.

Great Truck. They run so much better without all that crap all over the engin. All that stuff just makes lot's of points where it can leak or get clogged, failing points. Not so much that it wont run just enough that they run like crap.

Great video Austin. Really enjoyed it.

Another awesome & informative video, thanks for the great content!

Love it👍👍 👋🥖🇫🇷 Bonjour👋 Peter

Brother I need you to get my 84 f250going! 😂 great job on the carb 💪🏼

Maybe might need the heat riser hose to the air cleaner up there in the cold. That 4 speed does look crisp. Front end looks a bit choppy on the highway :⁠-⁠)

use aviation form a gasket on the outside edges of the carburetor gaskets its a shellac based product. they have used it since before WWll. very useful stuff better than silicone I say. my2cents

I'm impressed.

Time to wash it. Good

I believe that 90% of what is on the road today, will be gone and forgotten in 40 years. Not necessarily because the drive train won't last. But because of the extensive electronic components. If you continue to change the fluids and conduct general maintenance on this truck, assuming rust doesn't get it, it could last another 40 years. Thats no exaggeration. And if I can make a suggestion. You have a very calm and steady voice. If you could go into more detail on things, I don't think anyone would complain. Because what you might think everyone knows- they possibly don't know all of it. In other words. When troubleshooting, show how you sprayed the vacuum areas with carb clean/ brake clean and explain why. Also explain the vacuum valve attached to the heater hoses and what it does and what you did to delete it. And when you rebuild something, show us what you are doing and why. It probably seems boring and redundant to you but to many of us, its very interesting. And maybe show what something runs like before your repair and then how good it runs afterwards- like you did here. This old iron brings back memories and not many younger folks are interested in this stuff like you are. You have a great instructional voice and your calm style is a gift. You're a natural. Not everyone on KZread is, and they try to mask their lack of talent with profanity and gimmicks. Keep up the great work my friend. I subscribed awhile ago so can't help ya there. But I like and comment on everything to help boost your stats. Cheers brother!

Runs better than a sewing machine

When we ran those trucks, the parts guys always asked if it was a Cleveland or a Windsor. I never knew the correct answer and never understood why they made two versions.

@Kevin.W.

4 ай бұрын

Actually they made 3 versions, Cleveland, Modified, and Windsor. Apparently not a very knowledgeable parts guy, the Modified, or 351M, was the only 351 offered in pickups back then. And the Cleveland, which was discontinued in 1974, and never used in trucks, while the Windsor was first used in trucks in 1982

👍 👍 👍 👍

👌👍

Nothing like getting rid of government regulations 😆

What’s your favorite chemical for cleaning carburetors? Also do you use an altrasonic cleaner machine?

@BackyardAlaskan

4 ай бұрын

I just use regular solvent in my tank. I haven’t used a machine.

Have a problem with fuel instead staying in carb over night can you tell me how to fix the 2150

@BackyardAlaskan

19 күн бұрын

I would check your float and needle

Similar tone of voice to KT3406E, another great hillbilly youtube channel

@giggiddy

4 ай бұрын

Thats exactly what I was thinking! And thats a compliment compared to some of these others fools screaming at the top of their lungs

The amount of worthless crap they put on those engines is mind blowing, If you can tune to use less fuel then you have less emissions. I hope your buddy decides to paint it, deserves it.

Typical ford ps pump

@Kevin.W.

4 ай бұрын

Why complain when there's a cure

Nice job sounds good 👍