Kflo you’re a Legend. If I had to do that I’d just get rid of my taco lol

@KFloTacoma

11 ай бұрын

LOL, thanks for the kind words bro. Yea, this work is definitely a big pain!

Aloha my Man… can’t tell ya how many times you and your DYI Skills have helped me out… big time Mahalo’s

This looks about as fun as replacing the belt tensioner on these 4.0 ! good video..

@KFloTacoma

11 ай бұрын

Agreed, Trying to get good lighting as well as usable video footage was also just as fun. Thanks for watching!

@timparker3272

9 ай бұрын

Did all my Idler Pulleys and Belt Tensioner (OEM), I removed the Fan Shroud and Fan which made everything very easy to access and complete, did some work from the bottom as well....

Excellent presentation.. appeared to be a little stressful and you handled it like a Toyota Pro..

@KFloTacoma

11 ай бұрын

This one is definitely one of the maintenance work that's hard to enjoy LOL. Thanks for watching and thanks for the kind words, George

Nice video but I was wondering wouldn't it be easier on the passenger side to unbolt the mount bracket from the engine block and then the 2 bolts holding the mount to the frame and removing the whole thing to avoid having to jack up the passenger side? Driver's side might not be so easy since the starter and ac compressor are in the way.

@mmmejias18

7 күн бұрын

Correct

You realessed this video at perfect timing bro i needed this info as i wam going through my rebuild!

@KFloTacoma

9 ай бұрын

Lol more to the series so stay tuned

Karl… dang brother…. This looks like a pain in the behind. Thanks for sharing and putting in all the work on this video

@KFloTacoma

11 ай бұрын

Thanks for the kind words, bro. Hopefully these videos help you guys out with the more complicated work!

Hi . I was wondering if you can tell me what best aftermarket Brand for inner and outer tie rod I have a 2017 Toyota Tacoma Limited. Thanks.

that little bracket below the motor mount that u removed to get the motor mount out, what was that bracket for ? mine are missing

I try to keep it OEM with replacements but that's not always possible. Did you go aftermarket because of price?

did you experience a lot of vibration before changing these while driving or rough shifting

Nice work! Do you not have the two mounting supports that bolt under the motor mount? They act like gussets to help stabilize the bottom of the mount.

@KFloTacoma

11 ай бұрын

Mine didn't have the gussets unfortunately. I am planning on fabbing up my own after the repair series

@DavidSound-cn2km

10 ай бұрын

Ah. Yeah, maybe a junkyard too. I may have some extra from scrapping my '13 taco

Biggest question is it worth it to do it on your own? I got quoted $320 in labor to have a mechanic replace them

What year is your Tacoma? My 2006 the motor mounts/brackets actually pushed themselves into the piece of shit frames on the 06's specifically. DMZ fabrications (California) actually sells gusset kits for the motor mount areas that tend to fail on the crap frames these things have. Thankfully, I could save my frame areas (welded and gussets). Keep an eye on those areas where the mounts are joined to the frame.

@KFloTacoma

10 ай бұрын

Mine is a 2009 and gusseting those motor mounts is definitely on the list of of reinforcement mods once I have the truck running

Going to attempt this job.... It also includes a Transmission mount.... I have all OEM Mounts and Hardware, but I might have to get my Korean wife to use her tiny little hands in there to help with the tight places...LOL Do you have a Video on Installation of a Rear Anti-Sway Kit on the 2005 2G Taco??? Thanks KFlo!!!!

@KFloTacoma

9 ай бұрын

I hope the work turned out ok for you, Tim! Unfortunately, I don't have a rear sway bar installation video

@timparker3272

9 ай бұрын

@@KFloTacoma Thanks and No Worries KFlo, got the kit from Hellwig, it’s an easy job!! Should tighten up the back end nicely, has 3 different settings…. Haven’t done the Motor Mounts yet….

@timparker3272

9 ай бұрын

@@KFloTacoma As always, thanks for your awesome videos!! You’re the BEST!!!

What lifting point would you use on an auto transmission Tacoma?

@KFloTacoma

11 ай бұрын

Ideally, it will be at the bell housing as well but anywhere flat really where you can lift.

Is this the same for a 2007 toyota tacoma 2.7 auto ?

@KFloTacoma

11 ай бұрын

The overall idea would be similar but it will not be the exact same way

Looks like my old motor mounts are staying in there.

@KFloTacoma

11 ай бұрын

Yea it's definitely going to be a pain to replace! Thanks for watching

Good video sir, we would like to invite you to do a review video for our Auto LEDs lighting and we just reached out to you via email for inquiring an opportunity. Hope hear from you soon to figure out what we can do.