Thanks, you just saved me $45!! I watched your video all the way, went back and did it step by step, pausing and replaying, and FINALLY have put a tube in without pinching it. Thanks for the video.

Awesome video! THANKS! I finally got my rear tire change with no pinched tube. This really made the tire change SO much quicker and easier. Thanks a million!

Rock on Jay. I have been one of your fans since St.Peters Cycle World USA. Back in the days when you and Randy bummped bars every Sunday.

@jamesonclark8306

Жыл бұрын

This is a different jay clark. The one you’re thinking of is my dad though!

My first tire change. Thanks a lot :)

When he put the valve stim in first at around 5:40. My mind was blown!

Again, great job Jay!!

You made that look so easy. Thanks mate!

So I got inspired after watching this and bought myself a tyre changer and a few levers. Honestly tha'st 4 hours of my life I won't get back. And some skin on my knuckles. This must be a super soft tyre to pop back on like that, I thought I was going to bend the rim. Certainly scratched it. For the one change a year just head to a shop and stump $30 or so for both tyres. Much easier.

Thanks Jay. Out back of the house in beautiful Laguna Beach putting a fresh set on my vintage 1977 IT175. Sorry 'bout the haters...

He does this for a living so it's going to look a lot easier when he does it. It's not rocket science, it's changing a tire.

yeah today i changed my tire, but with the exception of using a strong butter knife and fork. They were bent and busted, but i got the job done. Yeah it's a good idea to invest the right tools and don't be cheap like me. i do find that using three tire irons is the best way to do it. Small bites made it easier to work. following his instruction is good to go you will be a pro in a few tire changes. I use Windex and it's great for lubrication.

awesome dude! Ill do this method next time, Thanks

Thank alot Jay!

El sujetador de ceja también le queda a los rines de aluminio?

@ScenicZipaloot1 soft terrain tires are a harder compound than hard terrain tires. hard terrains are generally soft because the knobs grip hard surfaces better if they flex. thats why soft terrain tires are so slippery on hard pack stuff

I thought there was a mark on the tire that showed the heavy side (for balancing)? Just wondering what to line that mark up with in order to avoid shaking at high speed??

Great video!

Who makes those tire spoons Thanks great vid

does this also work without damaging the anodized color ?? and how?

Geese.... nothing like saving the finish on the rims.. looking at this i would love to see the pro bikes up close to see the mess the rims are in. He changes the tire good, but hacking the rim to shit.. guess you dont care when you have a million extra rims in the truck... any one watching this vid and has a good set of excels , i would think twice before doing it same as these dunlop guys. i have black rim and changed maybe 30 tires on them and still does not have a scratch even on the edge of the rim.. 30 tires the exact same way as he is doing this, my black rims would be a bright silver after his is done,. careless i think.

@USMC-Sniper-0137

6 жыл бұрын

MARCUSAURELIUS Nylon rim protectors

i ended up welding an old used dirtbike axle to te side of a piece of angle iron, then clamped the angle iron to my dads log trailer lol or something heavy, it works pretty good

awesome...wish i could download it on to my harddrive so i can take it to the track!!!

Do these tools scratch or mark the anodized rims?

oh you're right, what is the babypowder for?

Are you using the Motion Pro Spoon tire iron? Sorry if i missed it in the video.

I love it!

@JulianoMxRider2 it's called a bead buddy any motorcycle shop or online.

Is the rim lock really necessary? I fail to see how it does anything. I have a big lump in my tire and I feel it constantly riding down the road. Couldn’t I just take it off

@TheGRAZIM you can, there's an add on downloadable program to firefox :)

Gust like a bicycle tube, but more difficult to replace. Same steps though.

Hey Jay I'm trying to find where to buy the (slick designs tire stand) your using in this video. Could you point me in the right direction?

Help me please? Where can i find the same tire ( cross / Hard enduro ) , but 4.60-17 ,i am from Romania ,please give a website ...

is it normal for my tires to crack between the side nobs tire is almost new

anything else I can use in place of the "bead buddy"

Was the tire you pulled off a D952?

HOW COULD SOMEONE NOT KNOW HOW TO CHANGE A TIRE IT IS SO EASY WHEN I WAS 7 I USE TO DO THIS EVERYDAY

@yamaha3595 its a tool u can get go to your local canadian tire or wal mart

JESUS MAN when i was 5 i was changeing tractor and trailer tires MYSELF i do this here ALL the time

good for you.

using three levers can stretch the tire and the spoons can bend the disk 2:24

@atvrider43 yah he is

are tires that are made for soft sterain such as mud and sand is that a harder or softer rubber than a tire that is use for running hard packed and dirt and clay and ice and rocks please get back thanks

Is there a way to do it without scratching the rim. I see alot of paint missing

@RimShotWiLLEy

10 жыл бұрын

I think it was actually just the white baby powder...I thought it was scratched when I first saw it.

@hreindustries

7 жыл бұрын

Jordan01 just be gentle and maybe wrap them in tape. Even with out tape going slow will leave very minimal to no scratches and if it does most are on the top so you cant see them

does this tools can scratch my golden paint on my Excel rims ? O_O

i've seen a few of these rear tyre change vids.. all of them have very detailed info., UNTIL it comes to putting the valve stem through, which is skipped!!???, it's annoying bcoz I think that is the hardest part of a tyre change, it always leaves your fingers feeling like they've been run over by a steam roller.. and sometimes it seems almost impossible

@ian9toes

4 жыл бұрын

He showed the easy way, which is to put the tube in the tyre first.

i do it by hand because i dont like rim scratches and nicks his wheels look like shit

The man

Killing the rim wow

Looks easy

It's there so that the tube inside the tire doesn't stick together with the tire.

That tires looks very soft. Try it with a 3sf 80/100-21

Those marks on the rim is tyre soap . Those complaining about marked rims are usually the ones that finish in the last quarter in a race !

''mum im just borrowing your spoons ok''

@davison1021 your tire pressure it too high

LIKE AND TNKS :))))))

เครื่องมือเยอะไปมั๊ยพี่ ถ้ามีจำกัดก็ นาน อ่ะนะ

I did all this and my tube burst as I was "seating" the tire right where the rim lock is,how can I be sure the tube is not pinched in that area, If u change your own tube u have a KZread!!! hahahaah

@davison1021 *is

yea simple i was doing this when i was 9 im 14 now

maxxis tires are so shitty. Ive been trying to do this with screw driver for 3 hours not and its not going anywhere..

and im paying 20,000 bucks to go to mmi and they never showed us this

salut themanwiththekx, 3 c'est mieux mais tu peux aussi travailler avec 2, moi g galeré avec mes pneus, j'aurais peut être du regarder les vidéos avant. jessaierais demain cette technique

a video is beautiful in house and an actor is very comiqua and very happy because i'm a stupid boy

Not fond of the Dunlop tires, Nice instructional vid thou.

5:33

yep, he's scratching it allright :S

😁

I followed your this video but still had some trouble with a hard compound tire. Any tips/tricks ? Link of me putting the tire on. kzread.info/dash/bejne/fal10aizeavYltI.html

violence is about the only tool i use :P

It's just babypowder

How to destroy a rim!

見ると簡単そう。

he just fucked up his rim 7:24

@fpreston9527

7 жыл бұрын

FAID no that was tyre soap

dude you fucked up your rim 7:24

looks confusing

dude chill out, hes just asking a question

ก็มีหลายวิธีหลายแบบแล้วแต่คนก็ว่ากันไป ~~

Forgot where you throw the spoons across the room, and all the swearing and cussing.

Another video where nobody cares that their rims will look shitty when finished. Most people always leave the most important part of changing a tire out. These rims are not cheap and abusing them isn't cool.

you are not needed in life..

What a load of bs ! He's just tryna sell aload of products !! Well annoying !! Not actually give you any tips !! Nice tire stand !! Clunk clunk clunk !!