Great set up for the rifle Kenny. Thanks for the information and video.

That’s really nice Kenny! Looks like a performer 👍🏼

Thank you for your kind words and we are glad you are enjoying the parts! Let us know if we can do anything to help. Great video!

Thank You Sir! What a great combination! 👍🇺🇸

I had the same issues with the Triple Kross magazines and noticed some extra flashing on the front of the magazine body. I disassembled mine and "stoned" them flat to remove the inconsistencies in the thickness of the plastic and they work much better.

Great rimfire rifle setup Kenny. I like the stock that's on it. Compliments it nicely. Great barrel too. Good vid too.

Kenny, nice setup on that rifle. The mags are really nice. I'm running a KRG Bravo on my Tikka T1X. Really like how it handles and the options for it through Area 419 and others. I think it would compliment the receiver and barrel combo you put together.

Spectre 10/22 Chassis with a MDT SCS - SKELETON CARBINE STOCK is a solid set up for a 10/22

Kenny I think you let the cat out of the bag with this one. I ran a Kidd 10/22 with a KRG Bravo chassis at a NRL competition. At the shooters meeting I asked what I needed to do during the change of positions in lieu of the ‘open bolt’, one of my fellow competitors poked fun at the rifle and me, he didn’t have much to say after I finished ahead of him that day. The real advantage of the 10/22 is the timed tiebreaker stages. I still love the RimX 22 rifle you built for me and switch between the two rifles for matches.

I use the trimag adapters. You get to use factory ruger mags with the metal feed lips and the extra weight helps pull the mag drop free.

Good information!!

Well done! I really appreciate how you take a 'factory' rifle and make it rock. That said, it makes me wonder if the 'factory' guys have any idea what is REALLY possible with their platforms. Cool stuff! Thanks!!

I run the krg bravo on my kidd supergrade for NRL and its a solid set up. You can also melt lead and add it below the barrel channel to get your weight up to a more desirable set up.

I'm probably not alone here but I enjoy shooting my small bore guns more than my big boys. Nice job on the re-engineering of that. This would be good for someone just getting into the competition game. Keep up the great work Kenny. They'll be writing about you in the future.

Those mags are pretty neat

Well Done Video, great information. Looking to getting one for hunt/target fun.

Spectre ballistics chassis is my choice when I’m able to get one. Chassis uses the large diameter bolt buffer pin hole in the receiver as the second point of contact vs just the single screw from the bottom of the stock for attachment.

Great information..

I vote for a spectre ballistics chassis, with a collapsible ar style stock so you and the kiddo can shoot it easily. Also could you please give us some more info on the barrel? What length? Chamber? Thanks and great work, always look forward to your vids.

That looks like a build that my daughter (my shooting buddy) would really like. She started shooting with my "Ruger" 10/22 in a Fajen stock and a Chief AJ barrel. It was an old build from back in the 90's! She's shot my CZ 457 LRP very well, but she really prefers the 10/22 action. This might be a really nice setup for her. Are you going to have them up on your website soon?

Did you make that rest? It looks awesome!

I have the KRG and the Oryx and the Oryx is the better option. Solid action lock up. Instead of a rear tang it has a squeeze bolt that traps the back of the receiver. Most rigid 10/22 stock I’ve tried.

Ok...now I want a .22....lol. love that rifle setup

Best of the best here!

@EagleEyeShooting

Жыл бұрын

😋👍

check out the grey birch chassis. integrated arca rail and modular. I love mine.

I really like my krg bravo on my Kidd supergrade. Have the same tandem cross mag as you. It is hard to get aligned in the bravo! Other than that it is perfect! Has the ports to remove and change barrels in seconds

Victor company makes a stock with a rear tang for the receiver so it has more rigidity than with the single action screw

Check out the 10/22 chassis from Accurate Rifle Systems, best 10/22 chassis on the market imo.

I like the single stack mags. My thoughts , not proven, but they may not damage the nose of bullet like a rottory mag might. I wish we could lot test Eley semi auto benchrest. I seen them post different lots only once in the last couple years.

Try the Grey Birch DLX Chassis for Ruger 10/22, which will fit the Bergara BXR.

My biggest issue with semi autos in competition is weather. I've seen rifles that function just fine under normal conditions start to have issues cycling properly when it gets cold. Other than that I think they are great and I've been impressed with some of the accuracy I've seen out of the 10/22 style rifles.

McMillan makes an A5-22 full size stock just like the one for centerfire rifles but for the 10/22. Manners used to make a CS stock for the 10/22 but believe it has been discontinued. Have had the itch to build an accurate 10/22 for NRL22 lately. This makes me want to grab a Bergara for the 30moa rail and threaded barrel.

@EagleEyeShooting

Жыл бұрын

We can definitely build you one. Yt wont allow links but search DPGunworks on google for my shop. We guarentee the accuracy as seen here

What scope are you using on that 10/22? I just finished a Kidd build and looking for optic opinions.

Awesome setup Kenny, makes want a semiauto, how's the glass on the zeiss compared to some of the other high-end scopes

@EagleEyeShooting

Жыл бұрын

The Zeiss LRP S3 6-36x56 with the ZF-MRi reticle is my top choice. As an owner of a NF Atacr, the Zeiss beats it slightly in clarity in low light conditions and has a better reticle

@charlesmckinley29

Жыл бұрын

@@EagleEyeShooting put it on my wish list. Thanks.

Kenny you said you chambered it Match, not Bentz? The different barrel manufacturers usually chamber Bentz (their claim) instead of match to prevent cycling issues. So I was surprised that you put a lot of rounds of different ammo through it without cycling issues. I put a Tandemkross bolt and charging handle in my 10/22 Takedown Target Bull barrel, and I also had Brimstone rework my trigger group. I get good accuracy not nothing like what you're getting. Okay, so would you chamber a barrel for my Takedown?

Just ordered a Spectre gen 2 chassis. It comes with two fixation points for the receiver …

How long did it take to get that trigger group?? I bought mine a month ago and have another month till eta for my manticore.

Looking to change the barrel on my BXR but what thread pattern do I need to the receiver?

What optic do you have on it?

He’s worked his magic on another rimfire , this time it’s a semi Automatic 😳. Well done Kenny , it’s a shooter that’s for sure. I’d only every semi automatic rimfire was as accurate 😏.

What rest are you using?

Will that mag work on a stock bxr?

Watch the lips of the mag where the rim sits. That is where the butler creek “hot lips” magazines would fail. Haven’t had them in well over a decade. Hopefully the new plastic is better.

MDT oryx. No need for the rear lug. It clamps the action. Pretty cool design

I like everything about that manticore except for the safety

Do you have to thread your after market barrel to fit in? I have the carbon version and I thinking of getting a Kidd barrel, but I’m not sure if it will fit since the BXR receiver is threaded.

@EagleEyeShooting

6 ай бұрын

Recommend to have a barrel threaded but a traditional slip fit 10/22 barrel will work. You will have to purchase the clamp and screws since the BXR does not include it

PDC Customs chassis is my vote

The Bergara barrel wouldn't shoot for you or what? I put a Kidd trigger on mine and I love it. The original BXR trigger would misfire sometimes. But overall I like the BXR.

Perhaps a Grey Birch stock….simple,clean and rigid, and it folds if you like….

At this moment it's hard to understand where BXR ends ... it pretty much already full custom .... IMHO - I went with BXR after considering building 10/22 full custom.. it's really awesome rifle ;)

let's see an LSS for the 10/22!

What optic is that? It looks compact and I notice the Zeiss sticker but I'm not familiar

@EagleEyeShooting

Жыл бұрын

That is the ZEISS lrp S3 4-25x50

I see that magazine becoming a full semiauto jammomatic in short order just like all the other plastic lipped mags.

@EagleEyeShooting

9 ай бұрын

Yup

Of course a 10/22 does and has been for many moons! Use stock mags and couple them together, you can 3D print some low profile blocks and they friction fit in the bottom cut out then glue . ( I’ve had 2’s and 4’s since the AWB) Those mag releases can bump and snag so I prefer the extended bump (U) you push up with your knuckle, just as fast and won’t accidentally drop a mag. You should build 10/22’s from scratch and face the bolt and do all the tricks 10/22 guys have been doing for years. 👍 Doubt the treading makes any difference over the block and the stock safety or extended can be hit with the left hand while grabbing the bag with the right. 🤷‍♀️ Just some feedback from an old 10/22 guy. 😂

@EagleEyeShooting

Жыл бұрын

I was going to show case a complete kidd build on loan with what you stated here. 4K 10/22 and sadly this BXR shoots better and with all ammo

@TheSuburban15

Жыл бұрын

KIDD non-threaded barrel, with glass and pillar bedded Bell & Calson stock consistently shoots high 240s on USBR targets at 50 yards. Oh, the bolt was headspaced too. It likes SK/Wolf/Lapua.

@unclejim2330

Жыл бұрын

I have a $49 white face (green mountain blemish barrel) that used to be a tack driver but I shot it so much the back of the barrel needs refacing . A lot of people throw money at the wrong places on 10/22’s but there where smiths at RFC that could do wonders back in the day on the cheap before all the modern aftermarket and the target competitions where very impressive . 👍

@unclejim2330

Жыл бұрын

Btw High Tower Armory makes mag couplers similar to what I was talking about.

@EagleEyeShooting

Жыл бұрын

Well as a cheapo myself, this rifle cost is just over 1200. The cost of two 10 round mags plus the connector would be more than just buying the dual kross mag system. They use stronger springs and different rotary which is one of the only mags in the market that can keep up with a full auto trigger pack 10/22.

Looks pretty sweet Kenny! Now go beat up that semi auto class on the z challenge 😁

@EagleEyeShooting

Жыл бұрын

Im going for it. Waiting on your entry with the Kidd lol

@PursuitofAccuracy

Жыл бұрын

@@EagleEyeShooting dont wait on it. Its terrible. I tried pushing it like the bolt guns but its too light to be treated like that 🤣🤣

@EagleEyeShooting

Жыл бұрын

Haha. Yeah thinking on settling on a Oryx or PDC chassis

Did the Manticore fit in without issues? I am planing to order one for my BXR. Thanks.

@EagleEyeShooting

9 ай бұрын

Yes no issues

@JoDel-qam4u

9 ай бұрын

Thank you sir!@@EagleEyeShooting

I'm not sure how much the barrel and trigger were but surely it would be more cost effective to buy them both together with a Brownells receiver and bolt or better still one of the upgraded redesigned bolts and a stock ? As far as I can see when you go on to change your stock the only thing left of the Bergara is the receiver and bolt assembly 🙂

@EagleEyeShooting

Жыл бұрын

Receiver being threaded greatly increases accuracy. Add on a 30 MOA rail with a BRN receiver as well as the cost for bolt assembly and aftermarket stock and your within dollars from a factory BXR. You can add it up youself and see if you can beat 586$ (cost of a bxr). Trigger is the same price as a kidd or timney. As setup with the upgrades seen here is $1,200

@timlewis7087

Жыл бұрын

@@EagleEyeShooting Yes I see ... I'm over the pond in the UK ..a Steel barreled BXR over here is £805 ($991) and Carbon £921 ($1,134) ! crazy since they come from Spain ? Could the BRN receiver be threaded by a gunsmith ?

Did you have issues with the stock BXR? Reliability and Accuracy of stock BXR?

@EagleEyeShooting

6 ай бұрын

Yes I have tried 3 factory BXR's, all had issues with reliability and accuracy untill these upgrades where done

Would be nice to see how it shot with the stock barrel . Its hardly a Bergara any more.

@EagleEyeShooting

Жыл бұрын

kzread.info/dash/bejne/iY6d0qx8pZe5cag.html&feature=shares

Check out accurate rifle systems 1022 chassis. They are made here in ohio and very good. Myself and 2 buddies have them and love them. Machined in arca rail. Additional rear set screw for non rear tang actions. A great guy runs the company as well. Also yes 1022s are serious competitors when set up correctly.

@charlesmckinley29

Жыл бұрын

Where in Ohio? Thanks

@charlesmckinley29

Жыл бұрын

Found them

What, on average does it cost to build the BXR exactly as you’ve built this on?

@KrisSays

9 ай бұрын

I'm interested in that as well...

The mag side that hangs up keeps it from hitting the ground so it don't break the plastic feed lips that's the plus side down side is out have to pull it out

What would it take to buy a rifle setup like this?

@EagleEyeShooting

Жыл бұрын

Contact my shop by searching DPGunworks on google. With the exact setup, it would be priced lower than a Kidd at about 1800-2K

I been thinking about getting this gun. Or a Ruger competition 10/22 Any suggestions

@EagleEyeShooting

Жыл бұрын

This build was cheaper and has more upgrades for competition and seems to perform. I can build you one, reach out to my shop by searching DPGunworks on Google

@Dopeboizz

Жыл бұрын

Thank u I will soon

@Dopeboizz

Жыл бұрын

Do u sell the gun set up or do I have to send a gun for u to set up.

@Dopeboizz

Жыл бұрын

Just got mine now I need your Magic

Couldn’t you glue or JB weld two real 10/22 mags together and get the same result with metal feed ramps? Awesome shooter.

@EagleEyeShooting

Жыл бұрын

The dual kross mags internals have a stronger spring and different carousel. They are built to run full auto so it has an advantage for reliability. Its also cheaper than buying two factory mags and the hassle of glueing them together. Caveat as you stated is the plastic feed ramps

@Jeff-mv4yy

Жыл бұрын

@@EagleEyeShooting not sure the plastic feed ramps are a bad thing . Ruger s factory mags are inconsistent as hell .

Lol heck yeah. It’s alive now

How hard are the mags to load

@EagleEyeShooting

Жыл бұрын

They are actually pretty easy.

@Thickamus_Jones

Жыл бұрын

@@EagleEyeShooting Have you seen or looked at the BRN-22 Brownells receivers? What's your opinion on those?

@EagleEyeShooting

Жыл бұрын

I have no experience with those receivers. But 10/22 accuracy typically falls short due to barrel droop from the wedge system. Kidd receivers require thermo fitting them to reduce barrel droop and tighten fitment. The BXR receiver can take traditional barrels or threaded. IMO a treaded barrel will be a better choice

@Thickamus_Jones

Жыл бұрын

@@EagleEyeShooting I'll have to look into that. Thank you for the info!

@paulfennell01

Жыл бұрын

Lulu loader for .22 Ruger mags is a great piece of kit for those cold days.

Is that mag Cali legal?

@petera1117

8 ай бұрын

They responded it is legal in cali

KRG

@6creeder688

Жыл бұрын

Or grey birch chassis

@paulfennell01

Жыл бұрын

Boyd’s evolution

Put it in a LUTH-AR MCA-22 Chassis I will send you one.. EMAIL sent.

I like the Accurate Rifles Systems 10/22 chassis best. 👍🏼 It is available in both single and dual attachment versions of the 10/22 but you need to let Joe know which one you want should you order one. Looks like links are not allowed!