No video

Morimoto XBT Bluetooth RGB LED Controller - Demo and How to use| Headlight Revolution

If you're looking for your next AWESOME RGB controller, look no further than the Morimoto XBT 3-Channel RGB Bluetooth controller. This this is amazing!
Morimoto XBT Controller: bit.ly/37edRPR
The Morimoto XBT is available pre-packaged with different Morimoto LED lights, or all by itself. It has incredible range that will change depending on your smart phone's bluetooth capabillity and the environment in which you are operating in.
The JST connectors that we use to make the lights plug and play, in this video, are optional but highly recommended.

Пікірлер: 55

  • @ivanontiveros2230
    @ivanontiveros22306 жыл бұрын

    Do you have a link for the light's you are using for the demo

  • @TheKomar924
    @TheKomar9245 жыл бұрын

    GREAT INFORMATION IN THIS video!! thank you for the explanation!!!

  • @HeadlightRevolution

    @HeadlightRevolution

    5 жыл бұрын

    No problems!

  • @arellano7103
    @arellano71032 жыл бұрын

    Mine look good in the shade and at night but I noticed in direct sunlight you can barely see any light coming out it looks like when they are off why aren't they bright in direct sunlight?

  • @TripleTapHK
    @TripleTapHK11 ай бұрын

    Color chasing options?

  • @trooper1348
    @trooper13482 жыл бұрын

    That’s all fine & dandy for sitting in a parking lot or even on the trail just understand that red & blue lights on your vehicle are illegal.

  • @HeadlightRevolution

    @HeadlightRevolution

    2 жыл бұрын

    Good point!

  • @jasonbiggsimmsimmons2664
    @jasonbiggsimmsimmons26646 жыл бұрын

    There are others on the market like this. Check out the XkGlow controller.

  • @DellAgarpo
    @DellAgarpo6 жыл бұрын

    I'm disappointed that it doesn't have the ability to react to audio like with mic or music played in the app and can't create your own theme and have no choice but to rely on the existing ones

  • @jckgoldness

    @jckgoldness

    4 жыл бұрын

    Ya diode dynamics controller and app seem to work better, wish I went with them.

  • @yaredhaile8419
    @yaredhaile84194 жыл бұрын

    Do you have 3,5" XBT bluetooth with light? I need it for car show. Do you have any recommendation for Honda civic 2008 sedan?

  • @AntonioClaudioMichael
    @AntonioClaudioMichael4 жыл бұрын

    Can you have more then 1 phone connected to this morimoto xbt bluetooth module

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    I believe only one phone can control it at a time, However you can pair several phones to it.

  • @AntonioClaudioMichael

    @AntonioClaudioMichael

    4 жыл бұрын

    @@HeadlightRevolution thanks this info was verified by morimoto few hours ago appreciate the responce

  • @Fifthcell
    @Fifthcell3 жыл бұрын

    I assume it doesn’t work for dymanic/color flowing LEDs?

  • @HeadlightRevolution

    @HeadlightRevolution

    2 жыл бұрын

    It does not! Sorry!

  • @bobgoetzinger4646
    @bobgoetzinger46464 жыл бұрын

    I have a 52' Ford f-1 and I'm looking for a good housing,light, and controller combo .. thoughts?

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    That will be a tough one, we should probably handle this via email. Shoot us an email and we will be happy to get you set up! Sales@HeadlightRevolution.com

  • @ethandowney4789
    @ethandowney47893 жыл бұрын

    Is there a video that I can find how to install the halo onto the super7?

  • @HeadlightRevolution

    @HeadlightRevolution

    2 жыл бұрын

    No video for this on our page, sorry!

  • @sledgehomer
    @sledgehomer7 жыл бұрын

    Is it possible to use the XBT controller with standard white led aux lights (non rgb)???

  • @HeadlightRevolution

    @HeadlightRevolution

    7 жыл бұрын

    Technically yes, if you are a pro at wiring. We could really break it down how to do it to set up a single color flashing mode or something, but it's not designed to do that. If you customized the wiring wrong you'd break the controller. If you cut up and rewire the outputs it can be done if you know what you're doing.

  • @kilimizer
    @kilimizer3 жыл бұрын

    I'm having problems with the bt app not changing colors for morimoto

  • @HeadlightRevolution

    @HeadlightRevolution

    3 жыл бұрын

    Shoot a email to service@morimotoHID.com and they can assist you.

  • @kilimizer

    @kilimizer

    3 жыл бұрын

    @@HeadlightRevolution I did that 😔 but barely get any response other than the automated email back.

  • @chrisgonzales
    @chrisgonzales7 жыл бұрын

    Are there any plans for morimoto to develop a similar controller with RGBW ability. Or are there any other smartphone wifi or BT that allow RGBW and multiple outputs. Been looking online for a while. Great video btw explaining in detail.

  • @HeadlightRevolution

    @HeadlightRevolution

    7 жыл бұрын

    Currently, no.

  • @naamangeist7843

    @naamangeist7843

    4 жыл бұрын

    @@HeadlightRevolution I'm confused. I thought the 5-pin output on channel 1 was RGBW. The wire colors match this color combination.

  • @clintbrooks9517
    @clintbrooks95174 жыл бұрын

    Can you detail the three halo’s you used in the Super7?

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    Hey Clint! I apologize, I'm not sure what you mean by detail?

  • @clintbrooks9517

    @clintbrooks9517

    4 жыл бұрын

    Headlight Revolution what were the three different size halos you used? Bonus points if you show how to install them! Thanks for the reply!!!

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    We personally haven't installed halos on the Super7's. I would suggest reaching out to Morimoto directly on that, they will likely know!

  • @adriangustavoarayacoto95
    @adriangustavoarayacoto956 жыл бұрын

    You sale this product for accent 2014 ? Im istested buy headligth proyectors with this rgb

  • @corksoaker4934

    @corksoaker4934

    6 жыл бұрын

    Adrian gustavo Araya coto you should probably go back to school, your spelling and grammar is terrible just terrible.

  • @saulsaucedo9286
    @saulsaucedo92864 жыл бұрын

    If I want to do rgb and switchback, what kit would I use

  • @AntonioClaudioMichael

    @AntonioClaudioMichael

    4 жыл бұрын

    I'm running morimoto demon eyes as well as front and rear halos as well as this xbt bluetooth modual for my 2000 4runner and I have my front halos set to switchbacks

  • @LeeOnTheTrack

    @LeeOnTheTrack

    4 жыл бұрын

    youd use this plus a switchback controller and just place a relay on the output of the channel you want switch back on, then youd wire the output of the switch back controller to the red and green wires of the light and the relay, that way when u turn on a signal and the switchback controller sends power, the power from the xbt gets cut

  • @mc11757
    @mc117577 жыл бұрын

    I have the same Xbt Bluetooth but the range is no where near 100 ft away. Are all the same range or you amplified the range somehow?

  • @HeadlightRevolution

    @HeadlightRevolution

    7 жыл бұрын

    We don't have an amp on it, and we are a in a steel walled building with 3 walls between the studio and garage where we were.

  • @josezamora9450

    @josezamora9450

    7 жыл бұрын

    Same here. They start flickering as well after 4-5 minutes on

  • @dclarke2814
    @dclarke28147 жыл бұрын

    can u turn on/off zones separately or must all 3 zones be on all the time?

  • @tommywells1972

    @tommywells1972

    6 жыл бұрын

    Yes, you can. I️ have this controller and the ONLY bad thing is you can’t make the lights blink/strobe different colors.It will only fade to other colors. Other than that, it’s great.

  • @studiopeg

    @studiopeg

    6 жыл бұрын

    Morimoto tells me that to turn off a zone, turn down the tone all the way for that zone

  • @naamangeist7843

    @naamangeist7843

    4 жыл бұрын

    Each zone's brightness can be controlled separately with the "tone" slider. Adjusting it down from center dims the color from full brightness to off, adjusting it up from center washes it out from full color to white. So, you can quickly & easily find white, regardless of where your color wheel is set, by simply sliding the tone fully upward. However, the white is at full brightness and can't be dimmed without going back to color. Wish they would have put pure white on the color wheel so it would be dimable. But then, finding pure white on this color wheel would be about as difficult as finding any other basic color on this damn thing, very! This is why I've carefully found each basic color (red, green, blue, etc.) on the color wheel and then added each of them to "faves" for easier selection when I want them.

  • @marcusclark6282
    @marcusclark62824 жыл бұрын

    I need this

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    Make it happen!

  • @bigjim5551212
    @bigjim55512127 жыл бұрын

    RF stands for radio frequency

  • @HeadlightRevolution

    @HeadlightRevolution

    7 жыл бұрын

    Yep

  • @retiredman
    @retiredman6 жыл бұрын

    These lights are too damn expensive too bad

  • @HeadlightRevolution

    @HeadlightRevolution

    6 жыл бұрын

    There are less expensive options out there, this is an example of the best of the best. Contact us at sales@HeadlightRevolution.com for more details!

  • @naamangeist7843
    @naamangeist78434 жыл бұрын

    I just bought this Morimoto controller and found that it doesn't remain on the street-legal white when turning them on, rather switches to the last color used via the app after a few seconds, regardless on whether the app is active or not. Here is proof: kzread.info/dash/bejne/laKc27avfMuaabA.html

  • @HeadlightRevolution

    @HeadlightRevolution

    4 жыл бұрын

    Naaman, it's always a good idea when using aftermarket color-changing lighting to double check that your lights are in a street legal configuration before driving.

  • @naamangeist7843

    @naamangeist7843

    4 жыл бұрын

    @@HeadlightRevolution so if I have to make sure the app's tone slider is all the way up before discontinuing it's use, what good is the default-to-white feature? Also, what good is RGBW on channel #1 of the controller if it's app doesn't have RGBW controls? I purchased a RGBW demon eye and had to depin the white wire's terminal pin because the white LED stayed at full brightness due to no control from the app.

  • @souljagirl6553
    @souljagirl65536 жыл бұрын

    Honestly...no offense but your company was too lazy to do a full instruction sheet? smh..@5:25 mins You stated; ( Its an instruction sheet for people to go on the internet and find the instructions on how to do this) smh... Did you not take in to consideration that Some people dont have internet connection due to some of the areas they live in or the range of service just might be bad in the area. A lot of people own shops in those kinds of areas... ...Did you just throw it in the air & just say ; Screw the instructions & lets just save time & do a video & no money lost on paper& ink? Im pretty sure this product brings in enough money or Will bring in enough money from the purchaser's to have full detail instructions included.. This is meant for any company so dont take it personal but all Purchasers take the time to spend their money with different businesses & all companies should Make the effort & time to fully satisify their customers and not just your pockets.. Other than that i think your product is a good buy..

  • @HeadlightRevolution

    @HeadlightRevolution

    6 жыл бұрын

    Thanks for your comment! This video isn't really to show you the install in a vehicle. Something like this is a pretty easy setup. We feel like Morimoto did a good job of the online instructions that you can print off, that it wasn't necessary for us to do a video installation. We also feel like we did a good job showing how to pin wires from non compatible lights. It's basically, plug everything in and hook it to the battery. It's not a vehicle specific application, so to install it in my truck may be different from yours.