Badges for sure, rep the holden era

@RossReviewsau

Ай бұрын

I got them ready to go

@Nico-qt4qz

Ай бұрын

100% mate.

Starting that car reminds me of the 80's 90's👍🇦🇺🍻

@RossReviewsau

Ай бұрын

🤣🤣🤣 couple cranks eh

I say put the badges back on

@RossReviewsau

Ай бұрын

Ok another vote 🗳️ seems like it’s gonna happen 😅

@Rain-kg4bj

Ай бұрын

Definitely put badges on

New banner's looking good 😉🔥

@RossReviewsau

Ай бұрын

Thanks 🔥👀

What a hot looking Ute Mate. I can’t wait to see what the next 6 months brings for this Ute. Can’t wait for the next update.

Normally no badges looks best but being a Thunder I'd probably put just those on

@RossReviewsau

Ай бұрын

Ok cheers for the vote bro

@Holdmabearing

Ай бұрын

Second that, just the thunder.. same same but sets it apart from just an SS

It’s always a good day when Ross Reviews uploads a video of his Ute 💪

@RossReviewsau

Ай бұрын

Appreciate it brother

Hey Johnny....the beast is coming along nicely....the car has come so far from when you got it...tastefully done....❤

@RossReviewsau

Ай бұрын

Cheers mark

Black Holden and SS badges would be sweet as.

Put all proper badges on, definitely Holden & SS badges

@RossReviewsau

Ай бұрын

Will be

The Ross reviews banner looks really good !!!

@RossReviewsau

Ай бұрын

Thanks! Glad people can see me now

@nealebrown167

Ай бұрын

Sad the replacement 'E' didn't go back on in the right spot after the original got torn

Love the dedication mate 🤙

@RossReviewsau

Ай бұрын

Thanks mate

*I know Martini wrapped it, but it would look so much better without that sticker on the side. Its as bad as the'Monstr' one that was on it. Maybe just a little Martini sticker on the back window, the side one is no good. Just my opinion though. Your car, your choices.*

@Rotors-LS

Ай бұрын

Agreed, the tailgate hinges unwrapped (understandably) let's it down to a degree also Some black badges might help tie it together a little

@Rotors-LS

Ай бұрын

Additionally, rear infill panel and centre the numberplate, ditch the tow bar

Hey Ross about your centre Bearing I've done a few mark both sides with a marker once that is done can cepretate the shafts pull the bearing then put the new one on long as your marks you have had at the start line up your good to go I hope that helps saves yourself abit of money to put elsewhere in the build loving the rig by the way

One hell of an improvement you should be proud of yourself Johnny mate 👏 also badges on man 👍

@RossReviewsau

25 күн бұрын

Thanks I’m very happy with it

Original chrome badges back on. Bigger chrome exhaust tips. Custom number plates with a unique memorable name. Looking forward to seeing the new interior.

@RossReviewsau

Ай бұрын

Good call!

@tallica8145

Ай бұрын

Black badges, will suit the dark tint an will look better on top of the candy wrap

Jonno loving the look of the VZ. Looks mint! Come back and see me when you’re in Melbourne would be cool to get some pic of both our cars together! Plus we definitely need to do some skids side by side 😂😂😂 let me know when your in town would be great to catch up. Cheers

Nice its good when you know what you have done to it

@RossReviewsau

Ай бұрын

Absolutely

No Badges Bro looks nice in clean.

@RossReviewsau

Ай бұрын

Appreciate it

You really invested into the Holden UTE. It shows. i am glad to know you got the starter issue resolved. This has been an interesting journey watching the transformation.

@RossReviewsau

Ай бұрын

Cheers brother.. definitely been a journey and still got more to do!

@OLDS98

Ай бұрын

@@RossReviewsau It will be interesting to see what else will take place and happen. Looking forward to the video and seeing more Holden on your channel. I am beginning to understand just how big Holden was or is to Australia and New Zealand. I am observing from a United States perspective.

Bnb leather and the car is done bro 🎉

@RossReviewsau

Ай бұрын

Gonna look unreal then

It’s looking so good / just needs a bonnet bulge and a pro charger on there / you could probably take the hood off a Monaro gts and put it on there it’s the same front end basically

As long as you dont put a chevy badge on it ill be happy

@rangrskidmotorsport27

Ай бұрын

Don’t worry he hates Chevy badges on holdens

@RossReviewsau

Ай бұрын

Never a Chevy badge lol

Put dump pipes on look awesome 👌

@RossReviewsau

Ай бұрын

Might change them I’m kinda not liking the small ones 😭

nice great sound , its appetizing

@RossReviewsau

Ай бұрын

Thank you 😋

Your the most Aussie non Aussie😅 love your videos man

@Nico-qt4qz

Ай бұрын

😅

@RossReviewsau

Ай бұрын

Appreciate you mate 🇦🇺🤌

@AdamSWL

Ай бұрын

@@RossReviewsau And the little fella spotting the HSV as he rolls by on the scooter! A real chip off the ol' block ay!

Bro get rid of tow bar please it looks pox!!Overall looks really tuff good job!!👍🏻👍🏻

With those white walls maybe consider some classic decals and badges? EBay should have some.

was literally about to type i hope you are going to BNB leather for your interior and i skip through and see the sticker on the window lol . i love my interior looks as new as the day i got it over a year ago! fantastic team down there @bnb

@RossReviewsau

Ай бұрын

I can’t wait to see the Ute after they have it!

You gotta do a carmeet in melbs man that would be awesome

@RossReviewsau

Ай бұрын

That’s the plan a car meet in every city going up to Brisbane

@Phatv6

Ай бұрын

@@RossReviewsau gptta let me know the details i’ll be there with my boosted v6 👍

Looking good bro nice Choices on the upgrades cool man Vz Glenn 🏎👍

@RossReviewsau

Ай бұрын

Thanks 👍

What a bloody weapon Johnathan. You’ve took her to the next level

@RossReviewsau

Ай бұрын

Appreciate it

Should delete the exhaust tips and dump them down behind the rear tires then get the holes plastic welded up. And also i think your brake disks are on the wrong sides they are spinning the wrong way

@RossReviewsau

Ай бұрын

? Really I could have messed that up 🤣

@PETERNESS

Ай бұрын

fk yeah

Get well soon Ross

@RossReviewsau

Ай бұрын

Thanks

Love the Vehicle. My brother bought a manual VZ ute in white the previous owner did a turbo kit on the alloytech. Hence why he bought it. I love both ford and Holden. More so Holden but anything Aussie is good. I've inherited my dad's Ford Falcon XY ute in spring frost paint colour. Old six 250. I'm gonna do it up as my daily.

@RossReviewsau

7 күн бұрын

Wish I had manual

Led Headlightss, Led Interior upgrade is definitely worth it, as well as installing (Bluetooth Wireless)

@RossReviewsau

Ай бұрын

She’s got Bluetooth and a sub already 😮‍💨

I’d be replacing the crank sensor, just had this issue on my vz ss sedan

Thunder badges for sure 👌

@RossReviewsau

Ай бұрын

Coming soon

Gloss black badges would look mint

Sometimes just locking it and unlocking with the key fob will start it when it starts and dies straight away.my vy ss ute does the same

@RossReviewsau

Ай бұрын

True.. just commodore things eh

Lookin good 😊

@RossReviewsau

Ай бұрын

Thank you! Cheers!

maybe it's my own taste, but chrome window trim would look kinda cool. They did that on the VE-VF SSV Redlines anyway.

@RossReviewsau

Ай бұрын

Could be interesting eh

Need those Ross Reviews custom plates brother!💥

@RossReviewsau

Ай бұрын

I do need them eh🙃

@Jaylaz

Ай бұрын

@@RossReviewsau Got anything in mind yet ?

@trixnhoez2964

Ай бұрын

Need ROSSDBOSS plates

yeah starter motor is close to the headers and the larger they are less room you have

@RossReviewsau

Ай бұрын

They got it sorted anyway

No badges looks clean. But each to there own bro. Looking and sounding mint. Been loving the videos! Keep them up

@RossReviewsau

Ай бұрын

Appreciate it!!

great vid, adding a vz calais chrome bonnet strip to it would look mint

@RossReviewsau

Ай бұрын

I’ll have to have a look at that

@victorpeirce4753

Ай бұрын

Yeah Nah.

I have a VY SS in red myself. I definitely prefer the no badge look tbh, might take mine off tomorrow 😂

@RossReviewsau

Ай бұрын

Fair enough!

@pauledwards6446

Ай бұрын

Put them back on now !

Just the Holden badge mate. it has such cool clean lines now. please don't spoil it with a lot of badges.

replaced my starter on my VZ 3 times it gets cooked by the headers, can usually tell when its on the way out when engine is hot and really struggles to start

@RossReviewsau

Ай бұрын

Mine took forever to turn over 😅

Sunroof addon is a nice flex 💪 ute is coming along nice tho man 😁 actually don't mind the badgeless back. The exhaust tips do the talking back there but yeah I actually really like the big single tip on vz's but that's me 😅

@RossReviewsau

Ай бұрын

Just wanted chrome eh🥲 but a bit bigger would have been nice

Put badges back on mate vz looks great

@RossReviewsau

Ай бұрын

Will Do

Big the pacemakers do make getting to the starter an issue.. I spent ages trying to wire mine up

@RossReviewsau

Ай бұрын

True they got it done already

Reduction gear or standard starter ?

Badges for sure

@RossReviewsau

Ай бұрын

Done

Ross and his aussie accent coming through is fucking brilliant.

@RossReviewsau

Ай бұрын

🇦🇺 let’s go

Changing starter with pacey headers is a bitch as the boys say.. Gotta take headers off, plugs out, sometimes move steering rack back a bit. Oh and debadged for the win

@RossReviewsau

Ай бұрын

Yeh they got it done thankfully

Definitely need the ss badging thats a no brainer

@RossReviewsau

Ай бұрын

Coming soon

Looking awesome! 😎 I cant find the link for the vinal workshop guys.

@RossReviewsau

Ай бұрын

On Insta Martini motorstyling

@fordfella801

Ай бұрын

Awesome, cheers mate. Hi from nz 😊​@@RossReviewsau

here in new zealand these cars are making a bit of comeback, i have a 79 vb v8.......would love to see a video on anything vh,vc,vk,vb 🙃

@RossReviewsau

Ай бұрын

Would love to get one of them.. hard to find here unfortunately

Should come to Qld to some reviews on cars over here there are some real tuf f cars in Qld

@RossReviewsau

Ай бұрын

I’ll be driving their soon

Badges now 😊

@RossReviewsau

25 күн бұрын

Yup going on

looks so damm clean and the colour POPS but its such a shame it has to have the company who did the wrap on the side of the car ,jeez couldnt you just pay the man retail and have one colour instead of being a rolling advertisment ,no offence to the fella who did the job its sweet but you know what i mean

@RossReviewsau

Ай бұрын

Each their own Pete.. I’m proud to support him tho, he’s also a friend.

@victorpeirce4753

Ай бұрын

​@@RossReviewsauBut it still looks crap with that down the side. A sticker on the back window should be enough. A real friend would understand. Your car though bro. You do you.

Could leave the Holden badge but id personaly put ss and the thunder ones on

@RossReviewsau

Ай бұрын

Ok another vote for badges

If you're gunna go badges, bro. go blacked out and just the SS and holden badges. Would look tuff

@RossReviewsau

Ай бұрын

I’ll think about it

Ute looks great. What exhaust do you have on the car?

@RossReviewsau

Ай бұрын

It’s a manta system with pacemakers headers

17:09 you should put dump tips on there they look heaps better and there bigger

@RossReviewsau

Ай бұрын

Might do in the future

I reckon just ss and holden badges obviously in silver 👌

@RossReviewsau

Ай бұрын

🤙

Honestly I reckon having just the thunder badges on either side and just the SS on the back, would look hot brutha 🤙🏻🤙🏻 Been watching since you had like 2k subs and I love your content man, keep chugging broski 🤘🏻

@RossReviewsau

Ай бұрын

Thanks bro.. I’ll play around with the badges n see

When are you coming to Melbourne and what’s the plan

@RossReviewsau

Ай бұрын

Waiting on something personal.. but should be next month

@willm687

Ай бұрын

@@RossReviewsau ah so not a car meet or reviews

@willm687

Ай бұрын

@@RossReviewsau if you’ve got time you should Cruze down to geelong. Have a Squizz at the ford factory. And a few of the cars in the area. Unfortunately we don’t keep nice cars as nice as Melbourne Queensland or Sydney

Matte black badges

@RossReviewsau

Ай бұрын

I think just chrome tbh

Who did your custom steeing wheel mate? Looks goood.

@RossReviewsau

Ай бұрын

It’s from kahan

Just put the lion badge back on tailgate that’s it

Put the Ss and thunder badges on leave the holden badge off

Grab two computers why they exist .

Badges bro rep that IRON LION

@RossReviewsau

Ай бұрын

Yep🤌

Put a walky 375 package in the ute

de badge bro

Hey bro i got inspired by your channel and Mad Max Fury Road, and finally bought myself a V8. Holden Commodore SSV VE Redline. BUT IT'S SO QUIET! What muffler would you suggest to put on it for a deeper sound? Btw, put the badges on. No badges might seem like you're driving a v6 and trying to be cool imo.

@RossReviewsau

13 күн бұрын

Nice work! Honestly any exhaust will help you out make sure tho headers is a big part

Badges back on bro

@RossReviewsau

Ай бұрын

Done

it needs ss badges otherwise looks like a base model ute to the average joe

@RossReviewsau

Ай бұрын

I’ll get them back on

Yea badges back on!!. looks tuff though!!.

@RossReviewsau

Ай бұрын

Noted

Starters are easy as to do on those with the headers, also sounds like more than a starter issue, sounds like a fuel pressure issue or maybe bad tune?

@RossReviewsau

26 күн бұрын

Seems to fire up fine now

@curtis4925

26 күн бұрын

@@RossReviewsau well send it lol , it’s looking sick btw

Utes coming together nicely! Let me know if you wanna sell the red leather, I want a set for my VY SS ute

@RossReviewsau

21 күн бұрын

Thanks mate! I’ll see if I still have em or if the interior show uses them not sure

@KRALOS

20 күн бұрын

@@RossReviewsau sweet as bro, let me know if they come back to Perth with you

Old school Camaro SS badge in the centre of the tailgate and leave all the others off and go the racecraft rear cannons. They look and sound great

Black badges

If that was an sv6, you would definitely need to have a tow truck on speed dial .

@RossReviewsau

Ай бұрын

SS only 😮‍💨🦁🇦🇺

Should deffo put the thunder badges back on. It'll complement the other chrome bits on the car

@RossReviewsau

Ай бұрын

Will do

colour code the wheels haha

Did you run it on the dyno while at tuffs?

@RossReviewsau

Ай бұрын

Not yet😂 I’m keen to tho

NO BADGES

Save the huge tips for when u get huge power, those ones still look good

@RossReviewsau

Ай бұрын

Fair

How much did the whole wrap cost?

@RossReviewsau

Ай бұрын

The material was about 1500

Just Commodore things😂. The body looks fucking awesome Ross but we all know the rest of the car is a big pile of Holden shit! The only thing Holden was good at was borrowing motors from other companies

@RossReviewsau

Ай бұрын

Nah bro I love em both ford and Holden for the win

My ss has gone thru 3 starters.. due to being destroyed by heat from the headers..

@RossReviewsau

29 күн бұрын

Must be what mine was also

How buddy how can I send you pictures of my car so you can see if it good enough to Go on the channel

@Finger_Blasterr

Ай бұрын

In his description he has his instagram and Facebook profile linked just click on one and send him a message

No badges

@RossReviewsau

Ай бұрын

Cheers

I vote no badges.

What’s the difference between a normal ss and the thunder? I vote put the badges on 💯

@RossReviewsau

Ай бұрын

The thunder gets the 6L v8

@PabloM5

Ай бұрын

@@RossReviewsau ahh yep copy that, and what about the VE thunders? I’ve got ve2 ssv but my mate has the thunder of my car and neither of us know the difference 🤣

Coming along very well stick the badges back on how long before the new interior

@RossReviewsau

Ай бұрын

As soon as it’s in Melbourne it’s getting done

just put only the SS badge on the back

@RossReviewsau

Ай бұрын

Cheers for your submission