Monster Moto 80 - Clutch maintenance

Today I am bringing a bit of a shift in content. While I am waiting for parts for the GSX-S1000 I am giving a bit of maintenance to the mini bike because the clutch was sticking in idle making the bike hard to ride.
Snap Ring Set - amzn.to/3iwj4mZ

Пікірлер: 30

  • @alexlewis5722
    @alexlewis57223 жыл бұрын

    Just bought one today fro $250 excited to work on it! Thanks

  • @uppairkk1811
    @uppairkk18113 жыл бұрын

    Great video just bought one of these for my son

  • @tysonhiggins8082
    @tysonhiggins80823 жыл бұрын

    Thank you, great help, from Texas

  • @ToModorNottoMod

    @ToModorNottoMod

    3 жыл бұрын

    Glad I was able to help.

  • @thewelder8161
    @thewelder81613 ай бұрын

    what is the bolt size for clutch

  • @kyletodd3068
    @kyletodd30684 жыл бұрын

    been thinking about buying one of these to cruise around the neighborhood with ahha

  • @ToModorNottoMod

    @ToModorNottoMod

    4 жыл бұрын

    Let me tell you they are a lot of fun. 🙂

  • @izakfriar6916
    @izakfriar6916 Жыл бұрын

    Like this guys videos just for the voice

  • @thecrazerkid2146
    @thecrazerkid2146 Жыл бұрын

    Is it normal to grab the clutch and have it wiggle around as if the bearing is bad?

  • @ToModorNottoMod

    @ToModorNottoMod

    8 ай бұрын

    They have some play

  • @sayblaze
    @sayblaze3 жыл бұрын

    Mine moved slowly 🐌I don't know why it use to moved me it only stays on when I hold the throttle

  • @ToModorNottoMod

    @ToModorNottoMod

    3 жыл бұрын

    That's how mine started. Moved slowly and then it stalls. Have you tried this? Have a good day

  • @sayblaze

    @sayblaze

    3 жыл бұрын

    @@ToModorNottoMod I can't try this because they made the bike where the clutch can't come off

  • @ToModorNottoMod

    @ToModorNottoMod

    3 жыл бұрын

    @@sayblaze hmmmm is it the same model as mine?

  • @sayblaze

    @sayblaze

    3 жыл бұрын

    @@ToModorNottoMod yes u finally got it off and it still won't stay on after I clean it

  • @ToModorNottoMod

    @ToModorNottoMod

    3 жыл бұрын

    I'm glad ypu were able to remove it. Did you add any waterless grease? Is not so much the shaft getting dirty, is more the shaft having not lubrication provoking the clutxh to engage even at idle.

  • @Jayden-hq9gh
    @Jayden-hq9gh3 жыл бұрын

    what size clutch is that.

  • @ToModorNottoMod

    @ToModorNottoMod

    3 жыл бұрын

    Hey Jayden, that is the OEM clutch that came with the bike. Being very honest I don't know the size of it. I ended up selling the bike so I don't have it to check and give you info on it. Sorry.

  • @TacoTv707
    @TacoTv707 Жыл бұрын

    What if it’s stuck

  • @ToModorNottoMod

    @ToModorNottoMod

    6 ай бұрын

    Hey man sorry, I imagined you already fixed it, but if not this is what I have experienced. If you don't lubricate the shaft where the clutch is mounted on the heat is going to weld the clutch to the shaft. You are going to need to hit the clutch around the area of the shaft with a piece of metal to break it loose. Be careful not to damage the shaft, eventually it will come off. once off make sure you clean the area where the clutch was stuck with a fine sand paper so it's smooth again.

  • @TacoTv707

    @TacoTv707

    6 ай бұрын

    @@ToModorNottoMod dam time fly I’ve upgraded to dirt bikes now super moto

  • @ToModorNottoMod

    @ToModorNottoMod

    6 ай бұрын

    @TacoTv707 hahahahaha sorry! Hey I had a supermoto, I still have my FZ and my dirtbike and I still find myself having too much fun with my son’s minibike. So much that I am considering to build one for myself. You are never too old for a minibike.