I really love your videos! They are really interesting and fun! I made the spanish captions in "Monster magnet meets servers...". So I'm also gonna do spanish captions with this one! 8)

@brainiac75

6 жыл бұрын

Aw, that's awesome! I was just thinking the other day that I haven't officially thanked all the people that translate the subtitles on my videos. Thank you very much! It means a lot to my viewers, my channel, me etc. I know it takes some time. I did the English and Danish subtitles for this one :)

@etz80808yy

6 жыл бұрын

Yeah, it takes a lot of time, but it will be worth it! Also thanks for the pin and the heart! ♡

@poetranoegraha6641

6 жыл бұрын

Juegabenstone ps : no he didn't heart you.

@xivix6710

6 жыл бұрын

You're a great guy !

@KamiZi0

6 жыл бұрын

Pins comment but no like?

So this is why my compass in Finland is now pointing to Denmark.

@valaha

6 жыл бұрын

lolse

@_EggsBenedict

6 жыл бұрын

lol, same here XD

@user-op5ki3iz7h

6 жыл бұрын

Sama

@sarik2843

6 жыл бұрын

ArmasLahtaaja no voi pewkele

@nowonmetube

6 жыл бұрын

ArmasLahtaaja I thought they were German...

Next challenge: remove the two magnets apart

@RabeaHussain

3 жыл бұрын

impossible , i have 2 n52 2" by 1" it takes me 10 min to separate using wrenches and a lot of hand injuries , then they got suck together again , now i don't want to bother

@claudiahalmel6771

3 жыл бұрын

@@RabeaHussain its not impossible Magnets lose their strength if you heat them up you can eaven permanently remove their magnetic field if the heat is to big but im sure that it is impossible without permanently weakening the magnets or eaven destroying them in the prosses

@megonggaga8046

3 жыл бұрын

Chainsaw goes brrrrrrrrrrrrrrrrrrrrrrrr

@pixelparasite829

3 жыл бұрын

@@claudiahalmel6771 I'm pretty sure that he doesn't want to destroy the extremely expensive magnets.

@tigerpresentationsproducts425

3 жыл бұрын

Use a lighter and a chisel

I would love to see these magnets assembled on some sort of track that allows them to slam into eachother at full force.

@prat751

2 жыл бұрын

Wouldn’t they just shatter?

@maryjanedeoferio6790

2 жыл бұрын

Yes it would actually be shattered

@plqtypus

2 жыл бұрын

they would be so expensive and they would shatter

@the_undead

2 жыл бұрын

If you want to spend $1,000 plus dollars on that and then upload it to KZread I don't think anyone would complain because it would be quite the thing to watch.

@Noone-hk1vf

Жыл бұрын

Magnet train

Have you looked into using a hydraulic fluid as a way to slow down the magnets coupling? Thick acrylic cylinder to handle the serious pressure, bore it out to magnet diameter. Bore and thread a small hole at the bottom at the height of first magnet, install a brass valve. Insert first magnet, fill cylinder with hydraulic fluid, insert second magnet. The fluid will get through the sides of top magnet as it descends, but I think it's worth an experiment.

@nou4898

2 жыл бұрын

galaxy brain

@robcoastalga8279

2 жыл бұрын

That was my idea. Using a very viscous liquid.

@babybirdhome

2 жыл бұрын

Why not just use a copper tube about the diameter of the magnets?

@fredthegraycatt

2 жыл бұрын

Or instead of a messy fluid, just use dry ice?

@dwmaddawgs

Жыл бұрын

@@babybirdhome that copper might start glowing with the electric field created

0:54 My brain cells on a hard test

@radioactivefish9755

4 жыл бұрын

Haha you just earned a sub

@Rainy_R

4 жыл бұрын

:O Thx

@radioactivefish9755

4 жыл бұрын

:D Np

@aiden-qk6fs

4 жыл бұрын

Here's another sup

@aiden-qk6fs

4 жыл бұрын

Sub

I kinda want to see them get seperated

@accckiy

6 жыл бұрын

easy, just put in a fire. But after you can frow them out. That will the last time you see them working.

@red__guy

6 жыл бұрын

Mustafa Gezer Im more afraid to

@thegamingpikachu6784

6 жыл бұрын

All you need to to is get a hydrolic press xD

@red__guy

6 жыл бұрын

The gaming pikachu Its time for collaboration, visit finland.

@Sorestlor

6 жыл бұрын

Yes put magnet next to giant metal press.

how about a tube the diameter of the magnets perforated along its length with tiny holes. fill the tube with crushed ice, as the ice melts the magnets move closer together..

@cola98765

2 жыл бұрын

this... is actually interesting idea it would allow combining magnet of any size as long as you have tube just a bit bigger than two magnets.

@chrism340i

2 жыл бұрын

Wouldn’t work as once they get close enough the magnet force will force the ice out at extremely high pressure. Essentially it could cause the ice to melt

@Ikxi

2 жыл бұрын

@@chrism340i So the pulling force is so strong that the ice gets crushed so hard the force behind it is enough to bring the ice to a higher temperature? I would really love to see this in some thick acrylic tubing with smaller magnets than shown in the video but still strong ones

@chrism340i

2 жыл бұрын

@@Ikxi yes, think of it like a hydraulic pressure. High pressure=heat

The legend says that those two magnets are still stuck to each other till today :)

@jessicapeterson9711

3 жыл бұрын

Lol

@guynorth3277

2 жыл бұрын

How are you going to get them apart

@PrivateFlown

2 жыл бұрын

@@guynorth3277you dong

@PrivateFlown

2 жыл бұрын

don't *

@guynorth3277

2 жыл бұрын

@@PrivateFlown; One cannot ask a question

If the magnets did “smash” together would it actually shoot outward, or would the strength of the magnetic pull keep it in a shattered mess? 🤔

@rustable4165

3 жыл бұрын

they would most likely fly out

@rustable4165

3 жыл бұрын

@@tearex7023 ok

@shathisvaran1026

3 жыл бұрын

I believe they’ll broke in some pieces and fly together

@AmmarAbdSaleh

3 жыл бұрын

I think once they break they wont be magnetic anymore

@ashdoesstuff3575

3 жыл бұрын

@@AmmarAbdSaleh that isn't how magnets work. I actually own a neodymium magnet that was broken in half and both halves still work.

Now throw it inside a server room and watch the magic happen!

@AubreyMK

5 жыл бұрын

move the magent to Epic games server rooms quick!

@yamahara5179

5 жыл бұрын

@@AubreyMK 2 IQ

@AubreyMK

5 жыл бұрын

@obonk gang how dare yopu insdut my inselagent, mu IQ is -14 andn musthc hfoher tharn yours

@Jer0867

5 жыл бұрын

That's evil, dude! Lol!

@harryb7505

5 жыл бұрын

MeKillYouTo 10000 IQ play

Watching this channel inspired me to get into magnets and now I have a massive 45,40 mm neodymium magnet which has been used to do all kinds of things!

@3-MPH

4 ай бұрын

like what?

Magnets are fun. Now you have the ultimate fridge magnet

Safety first boys! Helmet, eye protection, gloves, etc. and then walking around on your socks...

@todayonthebench

4 жыл бұрын

@@benoitcollignon735 A lot of modern security boots have plastic/fiberglass/carbon-fiber instead of steel reinforcement these days. Main reason is that a steel piece isn't as strong as the other options. So the rating of the shoe gets better with the non metallic materials, and they are lighter, and at times cheaper too.

@saltysoysauce954

4 жыл бұрын

Unlike me, magnets aren't attracted to feet!

@matthewjackson1661

4 жыл бұрын

@@todayonthebench that and if the metal gets damaged you may lose your toes due to the metal crushing them

@todayonthebench

4 жыл бұрын

@@matthewjackson1661 Yes, it tends to be easier to heal severely crushed toes and fingers. But if a piece of metal is bent around them like a candy wrapper, then it generally ends up as a lost cause. Though, the boots should be rated for the environment one works in. (ie, they shouldn't get crushed to start with...)

@gazz9995

4 жыл бұрын

@@benoitcollignon735 well just some normal trainers would be ok wouldn't want to get a splinter kicking that wood.

“No humans or magnets were hurt during the meeting of the magnets”

@420milesmemes

4 жыл бұрын

Trollol

@PantsYT

3 жыл бұрын

"Some plastic was though"

I think the best part was finding out that magnets can be very powerful. Before seeing this video, the most powerful non electric magnets that I have seen were rated for 500 pounds. But to see this at over 2600 pounds is amazing.

Great achievement! I imagine the sound you heard towards the end was the friction between the magnet and the plastic as they slid across each other.

0:54 is that engineer from TF2?

@AbdAbdAbdAbd

4 жыл бұрын

DISPENSER GOING UP!

@Deveus-et2tx

4 жыл бұрын

SENTRY GOING UP

@ActiveTerrorism

4 жыл бұрын

Sentry down!

@SD_N45

4 жыл бұрын

Teleporter down!

@D00Mthevillain

4 жыл бұрын

Bruh why is he cross-eyeing

2:10 *shaves off warning label*

@erixccjc2143

3 жыл бұрын

more like 2:06

@Ecktor

3 жыл бұрын

Wrong time code moi

@itsbonkerjojo9028

2 жыл бұрын

@@erixccjc2143 yep

@itsbonkerjojo9028

2 жыл бұрын

@@Ecktor he should be in jail .

@parlodadgood3538

2 жыл бұрын

kzread.info/dash/bejne/oZZnj9lyktSpmNI.html

I was so afraid about the final two "clicks" between magnets, when they first touch and then when the plastic gets removed, could damage them. Glad that nothing like this happened! 🙂

This video has given me a minor fear of magnets.

Key words: • dont • try • at • home

@flyaround312

4 жыл бұрын

•or •anywhere •else •unless you're a professional or a KZreadr

@aisfor1

4 жыл бұрын

•im dracula •blah •blah •BLUH

@vond5829

4 жыл бұрын

Well if you got enough money to buy one

@joksizantos7520

4 жыл бұрын

I cant read the first bullet, but as long as i follow as many of the keywords, nothing will go wrong - try, at, home

@joynigam4151

3 жыл бұрын

What are you doing here Darryl?

Imagine having a steel plate in your head and playing with these.

@fahreza4620

3 жыл бұрын

BONK

@pixelparasite829

3 жыл бұрын

You would be dead. Period.

@jakebingham8555

2 жыл бұрын

*Stan Ford intensifies*

@annickgunes8834

2 жыл бұрын

@@jakebingham8555 oh no

@parlodadgood3538

2 жыл бұрын

kzread.info/dash/bejne/oZZnj9lyktSpmNI.html

Imagine putting this in a MRI 💀

@CallMeZeroxx

2 жыл бұрын

death.

@viacomsspy5439

2 жыл бұрын

Okayge

This brutes the force between the two strongest magnets. I still recommend and remembered 5 years ago.

0:54 OMG Look at his eyes! such is the power of this magnet!!! 😱

@rafikamin6617

2 жыл бұрын

That was two separate video

@georgedog326

2 жыл бұрын

@@rafikamin6617 he was joking

@TheTrueC64

2 жыл бұрын

Lmfao

@jalliboy

2 жыл бұрын

@@georgedog326 cant fix stupid🤣 you cannot help a stupid person understand stuff. Haha

@samyakinho

2 жыл бұрын

@@rafikamin6617 r/wooosh

How about putting a big ice cube in between, and wait it to melt.

@tomf0olery

4 жыл бұрын

the ice cube would be crushed

@trydodis690

4 жыл бұрын

and the magnets will shatter or chip

@NicolasMorus

3 жыл бұрын

@@trydodis690 the key word was 'big'

@trydodis690

3 жыл бұрын

Nicolas M I understood that, I’m assuming his idea was to have a large piece of ice that would slowly melt until they’re in contact with each other but that isn’t going to work. There will be a point where the ice is small enough that it doesn’t have the strength to support the attraction of the magnets. It’s not as if the ice is going to gradually break, it will be a spontaneous event and the magnets might shatter with what is left of the ice.

@LightningShiva1

3 жыл бұрын

@@trydodis690 ya

I was expecting Stoner Metal. I still wasn't too disappointed.

@520azdc

2 жыл бұрын

Haha! I was just wondering how many stoner rock fans ended up here by accident.

Weld them together fully and make it a permanent 6x4? That would be friggin' AWESOME

At the end you magnet might be turning towards Earth's magnetic field too

@Cec1nator

6 жыл бұрын

ElectroBOOM that's what i thought too

@anchoriticparliament6343

6 жыл бұрын

That's what I thought was going on at first.

@blury6445

6 жыл бұрын

ElectroBOOM hi i love your videos Can i get an osciloscope Plz anser if i can😂

@ozgunkara1930

6 жыл бұрын

I love you and your channel man keep up

@theschnilser7962

6 жыл бұрын

Didn't expect you here xD

0:54 when working with magnets becomes so usual your eyes begin to become magnetic 🧲 👀

@user-bl7fm8bz4l

4 жыл бұрын

😂

@noprofilepicture205

4 жыл бұрын

😂

@ggsap

4 жыл бұрын

😂

@jiritesarek7601

3 жыл бұрын

bruh /:/

@IntergalacticVoid

3 жыл бұрын

😂

To this very day those magnets are still stuck together

Noise looks like it was caused by a frictional slide of the magnets on each other as they aligned themselves together, which is a lot of friction, on a tiny surface area, over a tiny fraction of time. You could have probably seen the heat generated on an IR camera, but that's an experiment for another video.

7:30 I'm stressed, i want to separate them 😅

@corvetaumbr2410

4 жыл бұрын

Now its practically impossible to separate them...

@user-tm8us2jo2s

4 жыл бұрын

Me too

@atmos_360

3 жыл бұрын

Same : (

@Prozakc.O

3 жыл бұрын

Heat them up

@qrtoryx1765

3 жыл бұрын

@@Prozakc.O I think if they would heat them up they would lose their magnetic properties

I'd say you have nerves of steel, but that's not possible because steel is ferromagnetic and would be pulled right out of your body. Therefore you must have nerves of pure graphene.

@coolguy284_2

4 жыл бұрын

He has iron in his blood, but it is not affected.

@cyberyt2632

4 жыл бұрын

@@coolguy284_2 It is effected but the amount of iron in you blood is so little that your blood is barely effect by a magnet at that level.

I love this video. We need more... like this 😁

Now you just need some Monster Magnet playing in the background

Asking someone to try and pull those magnets apart, would be like asking someone to pull Excalibur from the stone lol

@Silentguy_

4 жыл бұрын

Eric Bernik Only issue is that they would “pop” apart and be slung towards the cars and would probably slam into the body with the force of a semi truck

@jazmihamizan4987

3 жыл бұрын

@@Silentguy_ smol price to pay go scientific salvation

@Self-replicating_whatnot

3 жыл бұрын

Heat up and gently separate?

@ryanpaloma4951

3 жыл бұрын

Caliburn*

@dark6.6E-34

3 жыл бұрын

@@ericbernik4695 wouldn't work they are brittle

That sound is the vibration of the material as it recovers from elastic deformation. The magnets are applying two tons of compressive force and rather a lot of friction. As material slides out from between the magnets, it's popping back to where it should be, causing the vibrations. TLDR: It's not moving smoothly.

@Arheisel

6 жыл бұрын

I'm wondering why he didn't applied oil/grease/lube to the wedge

@johntheux9238

6 жыл бұрын

Yes the noise is the same than when I cold rolled aluminium sheet.

"Neodymium magnets are not toys" Damn, these super strong magnets are my dream toys when I was a kid..

Would be much easier like I did years ago with two 4in magnets. Sit one on the floor N side down, place a 2-3ft long pvc tube (with 1/4in holes drilled in it every couple of inches along the tube), over top of the magnet. I had made a jig out of 2x4s, hole-straps and zipties to hold the tube upright and straight. Fill the pvc with crushed ice place the 2nd magnet in (N side down) and let them slowly come together. The holes in the pvc will let you know its progress.

@marveloussoftware4914

2 жыл бұрын

How did you separate them? Or did you?

@MAGGOT_VOMIT

2 жыл бұрын

@@marveloussoftware4914 No I didn't separate them. Engineering had come to me as they had already shattered one pair (luckily no one got hurt) and damaged another pair. They were supposed to go on a new fast CTL (cut to length) machine design and found they didn't have enough levitating force with a single magnet to float the cutter assembly.

How about using a block of ice to bring them together

@migatoesungato

6 жыл бұрын

How?

@Autunite

6 жыл бұрын

Place the magnets with a block of ice between them, let it melt so the magnets move slowly towards eachother. However the ice could chip or explode under the pressure and the magnets would damage eachother.

@bloeckmoep

6 жыл бұрын

Ice melts under pressure. You can observe this with a thick ice bar and a wire loop with a weight attached to it. The wire will slowly cut through the ice bar. With those magnets it will go faster, the closer they get, since the pull force rises.

@fubisroc9673

6 жыл бұрын

Someone had a similar idea with a PVC pipe filled with water. The only drawback there being the pipe would have to be the PERFECT diameter to control the flow of water around the magnet. If you replaced the water with a cylinder of ice, the PVC would prevent an explosive blowout and almost any chipping/cracking would be repaired by the compressive force on the ice.

@JohnyAngelo

6 жыл бұрын

Still it would be interesting to see. probably not at home tho

A magnet: *finally a worthy opponent our battle will be legendary*

@hgmercury7279

4 жыл бұрын

witch one is saying it? the original or the new 6x2 or the new 6x4 saying to no.1 biggist magnet he has or that no.1 biggist one saying to 6x4

@subswithnovids-yl6mw

4 жыл бұрын

Its 2

@formalbusinessonion7265

4 жыл бұрын

Neodymium Magnet: "Where's the worlds strongest magnet?" Fridge Magnet: "How do you know you're not looking at it? " Neodymium Magnet: "Haha, you think I'm a fool? I know you're not the strongest magnet NONE OF YOU ARE! I heard they appeared from the ground in a electric field of magnetism. " That one random ass magnet that everyone has for some reason: "Neodymium? " Neodymium Magnet: "So that's its name? Neodymium. Finally, a worthy opponent. Our battle will be legendary!"

@aeronaut7346

4 жыл бұрын

Kung fu panda reference 👊

@parlodadgood3538

2 жыл бұрын

kzread.info/dash/bejne/oZZnj9lyktSpmNI.html

his sound like man in stronghold videogame

6:00 your guess is as good as mine: I think it was the friction between the magnet and the plastic, I don’t think metal/magnets and plastic don’t have much friction, but the fact that the magnet was being pulled so much. It just pushes the plastic down so much they’re starting to have friction.

Maybe you could've lubed/waxed the slide somewhat, just for easy of combining. But looks good!

@johntheux9238

6 жыл бұрын

I think the coefficient of friction decreases as the pressure increase. When all the magnet area touch the plastic part the pressure is low and the coefficient of friction is high. When only the edge of the magnet touch the plastic part the pressure is higher so the coefficient of friction is lower and the magnet slips. For the noise: imagine that the surface of the plastic part is a brush: when it adhere to the magnet because of the pressure it will deform to follow the point of contact. When it finally detach it resumes its normal form making vibrations. When the forces involved are low, the vibrations are ultrasonic and turn them into heat, when the force is high like in this case or like when something is cold rolled the vibrations turn it into sound.

1:26 what if we use 100% of our brain?

@GRTechs

4 жыл бұрын

😂😂😂😂🤦‍♂️

@Jeeves_0

3 жыл бұрын

?

@Sweet_Jelly39

3 жыл бұрын

I don't see any problem...

@banesrb

3 жыл бұрын

There's no need for glue

@doublemosasaur5091

3 жыл бұрын

Stfu if you have nothing to do with engineering that glue is needed to strengthen it idiots

Actually when you spun the magnets around on the table, they preferred a certain polarity. It's possible they were reacting to the earth's magnetic field and not fully the table, given their strength

When a science video has weight instead of mass

That sound was the irrevocable warping of the space time continuum, but luckily the damage is limited to merely our own Galaxy, so that's a relief!

@KClO3

6 жыл бұрын

that refrence lol

@aarongreenfield9038

6 жыл бұрын

Mouze. I was wondering if anybody was going to catch that;-)

@well3034

6 жыл бұрын

I give up, where is that reference from??

@aarongreenfield9038

6 жыл бұрын

Well, any luck yet? I can give you a hint.

@aarongreenfield9038

6 жыл бұрын

Well, hint, crazy hair, and used pinball machine parts!

Now get them apart

@Dalen22_W

6 жыл бұрын

Tyler Stanford lol

@onlymeok

6 жыл бұрын

Permanent magnets are adversely affected by high temperatures.

@hariyanuar8222

6 жыл бұрын

Easy, you can weaken their magnet power by burning or throw them until the magnet power is bearable then get them apart.

@pyro1324

6 жыл бұрын

Harry99, Throwing around neodymium magnets will just get you a mess of crumbles

@jamesdelatorre5634

6 жыл бұрын

Tyler Stanford I

I have 2 strong magnets I used for steel fabrication. I could put one on a string at one end of what I was working on, and pull the string really tight, and use the other magnet to hold the other end of the string. You do not put them face to face. They can hurt you and are not as big as the ones in the video. A guy I worked with borrowed them and stuck them face to face. I made him get them apart. They are so strong that if you do stick them to a piece of steel you do not just merely pull them off. One has a rocker mounted to the side. The other has a long bolt sticking out of the top of it.

I watched this video for a while before I realized what you were even trying to do… it was when I saw the two magnets together and realized how hard that would be without destroying them.

This new behemoth will invert a compass at 209cm but fail at 210cm.

try a negatively charged monster magnet and a positively charged one and see if you can levitate off of them

@brandondannys-menary3678

5 жыл бұрын

Deacon Bryant hell yeah

@idrilllsrp8508

5 жыл бұрын

Sounds fucking dangerous, he should do it

@akaredcrossbow

5 жыл бұрын

Deacon Bryant I think the top magnet might flip and then shatter!

@blobby2127

5 жыл бұрын

He would need a crap load of counter weights to keep the magnet from flipping. It might. It even work without flipping.

@Nicholas3412

5 жыл бұрын

Some Russian guy made a car suspension out of that

"Monster magnet meets monster magnet" then you have one extra big monster magnet

reguarding the noise, as the magnets got close to the edge the top one, being moved back slightly while pulling, ended up getting pushed to a further angle and loosening it's grip from the wedge, which allows the wedge to be moved before it grips again. it does this in a cycle a few times before the magnets touch and don't move apart anymore.

now the question is, how do you get them separated?

@XX-tb1fe

5 жыл бұрын

I can think of 3 ways. 1. Place them in an oscillating (constantly changing) magnetic field 2. Start hammering them 3. Put them in a furnace

@Tenskwatawa4U

5 жыл бұрын

You don't. EVER.

@BowTie8Bit

5 жыл бұрын

Create two magnetic fields, one for each magnet, that will generate a repulsive force between the two, just enough to get a wedge in. Or maybe strong enough to propel them away from each other.

@rhyzvanic3660

5 жыл бұрын

Generally you don't But an idea could be to put them into two separate panels flush together, and start pulling those panels away from each other while the magnets are snug together. Good luck having enough power to separate them though!

@Night-FuryDreamer

5 жыл бұрын

Keywords: You don't.

Nice. 👍🏽 Now take them apart.

@eveomatic2427

5 жыл бұрын

Slide them off

@GalaxyCloud

5 жыл бұрын

@@eveomatic2427 is WAY harder than it seems

@alexilaiho1st

5 жыл бұрын

Leak false info claiming one of them cheated on the other, then hide behind a solid wall.

@shanespicer4673

5 жыл бұрын

RIP the plastic wedge

@lukeslife3958

5 жыл бұрын

Legend has it he is still trying to this day

Magnets of that size are straight up terrifying. I only mess with magnets for model kits so the largest ive gotten is 1cmx2mm and ive shattered so many of them by not thinking about it and they just slam into something metal. I dont even wanna touch a magnet this big.

Geez, that's like working with the Demon Core!

Now we wait for the day when you have to separate them again.

@PedroSantos-ru9uw

6 жыл бұрын

are you think from wom2?

Towards the end I had guessed that it would 'eat' the wedge

The strength of the magnets are compressing the plastic and while moving digging in which makes a sound

imagine returning them to the manufacturer like that lmao

now you just have to make a contraption to separate them

I would not wanna take apart does 2 magnets. Awesome video.

@calebsherman886

6 жыл бұрын

Zero Walker It would take thor to seperate that.

@2ooo996

6 жыл бұрын

No, just use a spoon, that'll work

@dandanthedandan7558

6 жыл бұрын

2,000 .- No, a hamster would do it...

@corwinhyatt519

6 жыл бұрын

@ Zero, it is possible but I think the equipment needed would be very expensive. It would need some sort of split grabber that could exert a bit over 2 tonnes of force separating the magnets while retaining them and not damaging them.

@dandanthedandan7558

6 жыл бұрын

Corwin Hyatt Do those exist?

I was always taught magnets are not additive. Two strong magnets don't equal a stronger magnet just a slightly weaker one. But I would love to see the before and after tests

@the_undead

Жыл бұрын

As he showed in the video the strength of a magnet and dramatically decreases with distance so it's not that they don't add together it's just that the second magnets field is not having the effect you would expect it to but overall the magnet is stronger now than it was before

one of the first videos i ever watched on youtube

I was literally on the edge of my seat, slowly edging away from the monitor, grimacing with trepidation!!

@ramrod126

6 жыл бұрын

Glad I wasn't the only one.

6:32 for result

@michaelvw11

5 жыл бұрын

10:02 for the end

All that force holding it together, yet I still would bet it would be easier to take apart than a 2 by 1 by 1 Lego piece.

If you thought bringing them together was hard, imagine how hard it will be to separate them.

I never even thought that magnet could be this terrifying 😂

@ussessexcv-9189

3 жыл бұрын

This isn't even the final form of magnets, because technically electromagnets are still magnets and they can be many thousands of times more powerful than even this behemoth that was created.

@ms.jotukiller2846

2 жыл бұрын

@@ussessexcv-9189 *yup, we got the biggest magnet under our feet 😂*

@alienfromarea-5196

2 жыл бұрын

@@ms.jotukiller2846 average fridge magnet is more powerful than earth

@ms.jotukiller2846

2 жыл бұрын

@@alienfromarea-5196 oh right I forgot, thanks

@ninjahunterx7497

2 жыл бұрын

You guys are thinking inside Earth, and forgot the most powerful magnet. The Magnetar! Which is a Neutron star type with magnetic field of quadrillion times the Earth. This is so strong that, it will tear off atomic bonds (due to electrons in atoms) from about 1000 km away from its surface! (It's like a no matter zone).

Legend has it that they still sit glued

That little piece of plastic stuck between the magnets would drive me nuts 😆 My method, not that I plan to do it...but after giving the pinched plastic some thought, would be like this: Make a tube the exact diameter of the two magnets. Place one magnet at one end. Make a magnet-shaped puck out of dry ice (frozen CO2), place in the tube. Next add the second magnet. The puck would gradually turn back to gas, slowly bringing the magnets closer together, until finally completely joined. No solids at risk of being trapped! 😊 Might be worth a try!

@njm1971nyc

Жыл бұрын

...and reading though the comments, I realise someone else already thought of this. Although theirs was a joint effort ☺️

congratulations, you just recreated putting two 2×2 Lego pieces together but with magnets. no way in hell they're going to come unstuck.

@811brian

3 жыл бұрын

1x2 flat tiles are even worse!

@Jpx0999

3 жыл бұрын

I did it remove it the 2x2 legos stucks A lot of times Its INCREDIBILY painful and my nails are now made of steel Since whatdont kill foi Make you stronger But is possible

@perhapsYoYo

3 жыл бұрын

you know what sucks more? two 1x1s stuck on eachother

@parlodadgood3538

2 жыл бұрын

kzread.info/dash/bejne/oZZnj9lyktSpmNI.html

@cheez-itdestroyer

2 жыл бұрын

@@perhapsYoYo they can spin some and have corners over making them easy

id say the noise was the magnet sliding on the plastic wedge

@Edgewalker001

6 жыл бұрын

The noise is the magnet flipping over to touch the other magnet, which causes the crushed plastic wedge to expand back to its previous configuration, making that noise.

@TheNiteNinja19

6 жыл бұрын

Friction!

@FMFvideos

6 жыл бұрын

I'd say someone farted and tried to put the blame on the magnet.

@dboselx3713

6 жыл бұрын

it's from the magnetic felds becoming one

@johntheux9238

6 жыл бұрын

I think the coefficient of friction decreases as the pressure increase. When all the magnet area touch the plastic part the pressure is low and the coefficient of friction is high. When only the edge of the magnet touch the plastic part the pressure is higher so the coefficient of friction is lower and the magnet slips. For the noise: imagine that the surface of the plastic part is a brush: when it adhere to the magnet because of the pressure it will deform to follow the point of contact. When it finally detach it resumes its normal form making vibrations. When the forces involved are low, the vibrations are ultrasonic and turn them into heat, when the force is high like in this case or like when something is cold rolled the vibrations turn it into sound.

I love how he says that no one's ever done this before yet The slow Mo guys they have and it was spectacular

It could have been done much better. A screw-driven mechanism to bring the magnets closer while being under full control to the last micron of separation. In the process, you could also test the effect of the powerful magnetic field on different objects, metals and movements.

Who knew that putting magnets together was this hard. How about a video of separating them??

@onekoo4822

5 жыл бұрын

hard to make 1 magnet out of 2, without splitting those 2 into pieces.

@MrStealthWarrior

5 жыл бұрын

Probably force needed to separate them is enough to shatter at least one of them.

@djdm2603

5 жыл бұрын

i'd imagine you could wedge something strong like an axe head in there to part them a little then get 2 strong wooden boards between them, pull the axe off them and with several people pull the boards apart assuming you had some kind of handle on them. Would be pretty damn hard tho. edit: obviously you would have to have everything held down on separate rigs to get anything metal near them, but you would need something metal to not be crushed like that plastic, maybe some kind of wood is strong enough but idk.

@zippo90009000

5 жыл бұрын

they get deth....end of this shit

4:24 that helper is just a behemoth pulling the whole apparatus and his companion over the carpet 😳

@itsbonkerjojo9028

2 жыл бұрын

That's not helper duffer.

@Weespud70

2 жыл бұрын

@@itsbonkerjojo9028 your profile pic made me think a hair was on my phone

@itsbonkerjojo9028

2 жыл бұрын

@@Weespud70 so . Shud i dance

@ARYAN-gw6jl

2 жыл бұрын

@@itsbonkerjojo9028 should*

It's amazing how powerful rare earth magnets are

found this video in recommended after so many years

Now you should get another set and reverse the polarity of one and build a floating chair or something

@irvinw5810

5 жыл бұрын

Cody Martin YES!

@extraterrestrialcontent

5 жыл бұрын

INDEED

@reaperelecti490

5 жыл бұрын

Flexington Steele Had one in the movie "Get him to Greek"

I once put two refrigerator magnets together

@robmcfarlane3602

5 жыл бұрын

Man.......you're the craziest !

@landofowl3800

5 жыл бұрын

You Fool! *YOU’LL KILL US ALL!!*

@briannab1598

5 жыл бұрын

😂😂😂

@French_Cries

5 жыл бұрын

Absolute mad lad

@andreidicu2882

5 жыл бұрын

This is what happened to my spine

I think the loud noise might've been air between the 2 magnets escaping really quickly, going through the plastic wedge which acted like a Clarinet reed

those world strongest Magnet wont never ever pull apart

for a second i thought your eyes went berserk haha great vfx man

@simontay4851

6 жыл бұрын

They did.

Thumbnail magnet so strong its pulling one of his eye the wrong way 🤪

@LoginLogout

5 жыл бұрын

Lol haha

@marspotato

5 жыл бұрын

Its not funny, what if its a medical condition

@stormdivision617

5 жыл бұрын

@@marspotato its not he edited it this way

@marspotato

5 жыл бұрын

@@stormdivision617 thats some weird editing to do

@Amnesiaaa06

5 жыл бұрын

Its vfx dude

I believe the area between opposing magnets holds the yet to be discovered answer to clean power generation.

I use to work next door to a place that sold magnets. Sometimes they would get a shipment with a huge magnet in a box. Every now and then the magnets would be stuck to the side or floor of the truck. We would use a forklift and a 10,000 pound capacity nylon towing strap to move the magnets.

A bit late on this one but the fact that you managed to unite your strongest magnet with itself is INSANE. What once was your strongest magnet, now paired together with itself to make an absolute beast of a magnet. That alone is astonishing and I can't wait to see how well it will perform against your 200×50cm magnet in your next video. Awesome video as always, Brian.

@nowonmetube

6 жыл бұрын

Abu Hamza Muharemović "unite your strongest magnet with itself" what

@Silexium

6 жыл бұрын

nowonmetube As in unite two of the same magnets together.

Good luck separating the 2

A large magnet collider would be neat to see.

Is nobody going to talk about his eyes at 0:54 ?

@brysonsirus7747

6 жыл бұрын

IKR! How?!

@ivenom6740

6 жыл бұрын

its an edit. watch his eyes in the reflection at the bottom on 4k. there not eddited like the top

@Kkoorrpp

6 жыл бұрын

Gunide The Human It said, (VFX may have been used in this shot...)

@GEMINIz5

6 жыл бұрын

Ikr

@alexc4924

6 жыл бұрын

That's the VFX

How to divide this magnets after.

@felixar90

6 жыл бұрын

A nuclear bomb

@Jaakko_Ruotsalainen

6 жыл бұрын

With a hydraulic press.

@aqaridot

6 жыл бұрын

Jaakko Ruotsalainen Hydraulic press presses the things into things...

@user-lz6hf4ys9m

6 жыл бұрын

AqarI [GD] I think he means by putting a wedge in the small gap and pressing down so it splits

@Hutch5321

6 жыл бұрын

The only way to divide them is to use shear force. You must slide sideways using two frames. It shouldn't take as much force as it did to put them together as in the video. However, the frames must be well constructed so as not to allow the magnets any movement in any direction. Two guys on each frame would probably be enough.

honestly I wonder how it would look if such crazy magnets would just crash towards each other but obviously a waste of the magnets.

Him: "These magnets are NOT toys...." "Why are you doing this?" Also him: "Well it started out as a joke..."

6:30

@nosaddi4149

5 жыл бұрын

Fede thank you I pay you with a like

@weakw1ll

5 жыл бұрын

I looked for this comment