Monster Hunter PSP Shells | Real vs Fake

Ойындар

Today we install & compare the Monster Hunter Portable 2nd & 3rd shells for the PSP 2000 & 3000 with the original ones
Channel Support Affiliate Links For Everything Below:
PSP 3000 Monster Hunter 3rd 095 Shell:
s.click.aliexpress.com/e/_DFR...
PSP 2000 Monster Hunter 2nd Shell:
s.click.aliexpress.com/e/_Dd4...
Note: Seems Like "OLD 093" is no longer being sold
-----------------------------
Tools:
-----------------------------
Flush Cutter:
s.click.aliexpress.com/e/_Ddj...
B7000 Adhesive Glue:
s.click.aliexpress.com/e/_DCj...
Sandpaper:
s.click.aliexpress.com/e/_DC6...
Diamond Needle File Set:
s.click.aliexpress.com/e/_Dk0...
-----------------------------
Time Codes:
-----------------------------
00:00 - Intro
00:09 - Original Shell Overview
02:57 - 2000 Replica First Impressions
04:26 - 3000 Replica First Impressions
06:06 - 3000 Motherboard Compatibility
07:02 - 2000 Comparison
08:27 - 2000 Install Experience
09:55 - 3000 Comparison
11:24 - 3000 Install Experience
13:08 - Final Notes
14:10 - Mini USB Accessory Test
15:06 - Conclusion
-----------------------------
AliExpress Refurbished PSP:
-----------------------------
Cheapest PSP 1000:
- s.click.aliexpress.com/e/_DnS...
PSP 1000 / 2000 / 3000 ( Seller 2 ):
- s.click.aliexpress.com/e/_DkR...
PSP 1000 / 2000 / 3000 ( Seller 3 ):
- s.click.aliexpress.com/e/_DBD...
Quality Ostent Batteries:
- 1400mAh (Max For 2000/3000): s.click.aliexpress.com/e/_DB7...
- 2200mAh (Max For 1000) : s.click.aliexpress.com/e/_DnN...
-----------------------------
Discord: discordapp.com/invite/5bsGzq7
-----------------------------

Пікірлер: 61

  • @TotalKommando
    @TotalKommando3 ай бұрын

    Post Notes: I performed a light nail scratch test on the design prints on both models The 2000 is easily scratches, the 3000 held up perfectly without any problems. So another reason not to get the 2000 MH Shell.

  • @blendded6248

    @blendded6248

    3 ай бұрын

    Honestly all I want for my PSP-3000 is the expanded grips from the MHP3rd shell, I kinda don't want to spend $35-40 just to use 2 parts out of the entire kit. Like I don't even care that much about the extra battery space I just my console to feel better in my fairly big hands 😔

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    @@blendded6248 Perhaps its a topic I could explore for future video. Cheap compact ugly grips for your psp lol If you dont care about looks, you could buy 2 extended battery door covers that house the 2200 mah batteries, one closed normally, the other you sand down and glue on the memory card side

  • @pspmav
    @pspmav2 ай бұрын

    Love the video mate , helped me decide the replacement shell to get when it's time

  • @scavenger_0898
    @scavenger_08983 ай бұрын

    also the difference between the t92 and t95 models are the MMC led indicator, in t92 the led indicator is built-in in the motherboard, while t95 models are separated and attached to directional button flex

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    Yea that's another one, they really tried their best to cut cost lol, for the sake of the video I didn't mention it, as it wont be a problem during a shell swap.

  • @LightAngel133
    @LightAngel1333 ай бұрын

    Super excited to see the smokey project 😩

  • @waifuowner911
    @waifuowner9113 ай бұрын

    No wonder I had a feeling the eBay ones I was looking at looked weird with button colors or the shell color looking off and gaps on battery cover and on top and bottom of the shells

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    Wait till you hear about the Xbox One Titan Fall Edition controller fakes that have been floating around on ebay now a days, charging full price, they even come with a sealed box lol

  • @Jimmy9298

    @Jimmy9298

    3 ай бұрын

    ​@@TotalKommando Not surprising at all. There's a whole racket out there for fake goods. Remember being burned by SanDisk Micro SD cards back in the day. Complete with sealed boxes, as you say. So much effort just to be counterfeit. It's ridiculous how far they'd go for a buck.

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    @Jimmy9298 lol gotta have the 16TB MciroSD for $7

  • @SuperPlyushkin
    @SuperPlyushkin3 ай бұрын

    My favorite youtuber created a new cool video!

  • @erikkaze7061
    @erikkaze70613 ай бұрын

    Keep up the work love the psp videos

  • @extremecaliber2662
    @extremecaliber26623 ай бұрын

    I was looking forward to the glass lens replacement, since the psp I currently have has quite a bit of scratches from when I was a kid. Hope it comes soon!

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    I'll make sure it comes soon after the screen testing video : )

  • @Naxuttaja
    @Naxuttaja3 ай бұрын

    Awesome job! Keep it up!

  • @aresaht5825
    @aresaht58253 ай бұрын

    Man, your videos on PSP are excellent and really useful! Do you plan to do the same with others console? N3DS? Vita? DS Lite? GBA ? etc etc

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    Thanks : ) I plan to do some vita, possibly some ds stuff, and a few home console shell swaps. My focus right now is to finish the list of mods I have for the PSP.

  • @aresaht5825

    @aresaht5825

    3 ай бұрын

    ​@@TotalKommando God bless you man, I like your videos. Thanks

  • @quodgenusdracolupusrex4337
    @quodgenusdracolupusrex43373 ай бұрын

    Ok Elephant in the room, the genuine monster hunter 3000 line. Does the rubberized case rots off ? I had that few times with Rubberized.

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    It should have rotted off by now, its been 14 years. It seems to be perfectly fine and not made from cheaper materials

  • @Rotoms.
    @Rotoms.3 ай бұрын

    Have yet to buy a psp but I bought a new gaming laptop instead psp is next on my list!

  • @renzo7042
    @renzo70423 ай бұрын

    Im thinking of replacing the shell on my 3000 model, but sadly the Kingdom Hearts and the Final Fantasy 10th Anniversary shells either don't extst or aren't in stock...

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    I got plans for exploring laser engravers : )

  • @ericdance2
    @ericdance23 ай бұрын

    nice video one question where can i get the glass lens ?

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    You can find it on AliExpress: s.click.aliexpress.com/e/_DCjkSit

  • @unlimitedslash
    @unlimitedslash3 ай бұрын

    Been considering getting the MHP3rd shell for my PSP3000, now I'm convinced, but i will reuse the original buttons to avoid some of the issues mentioned, also gonna upgrade that battery to a 2200mah one, currently with a 1200mah my 9g revision lasts around 4 hours and a half with Daxter or Monster Hunter Freedom Unite, if i can double that i will be very happy, i usually played PSP games on my Vita which lasts maybe a day or so without charging when playing PSP games, but 3D games like MH or Daxter scale quite poorly on the Vita screen, good for gameplay as you have the additional stick which is great for MH, but the downgrade in visual quality is quite hard...

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    I wish the vita was able to push 60fps on Native screen rez on all psp games. That would have been the dream. Instead scaling sucks, lack of bigger filter options, slight latency, audio accuracy : |

  • @unlimitedslash

    @unlimitedslash

    3 ай бұрын

    @@TotalKommando I ended finding a work around for latency issues and audio accuracy using Adrenaline, installed CFW, now it loads in full PSP mode allows for some different filters and disable the bilinear filtering that blurs all the PSP and PS1 games, there is a mod that allows for native res on certain games like FF3 or 4 3D remakes, but it's highly limited in compatibility and MH isn't supported among many other 3D heavy games, thanks to Adrenaline you can also setup Inferno as the main driver and tweak CPU and GPU frequencies of the PSP chip, allowing for overall better performance, basically any option you have with a CFW PSP you get it through Adrenaline.

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    I'll have to revisit Adrenaline, its been a while since I last touched my vita. I know there are rez patches but sadly not for the games I enjoy like outrun or motorstorm among various others. I will prob start dabbling with it again once I do my Vita eBay Japan vs AliExpress video.

  • @alejandroorozco761
    @alejandroorozco7612 ай бұрын

    Is it possible to change the casing to a t92? Is it only necessary to make the hole for the antenna or are there too many physical changes that make it impossible? I only have a t92 version and I have always wanted to have that version of the PSP, and a case is the most tangible way. Thanks to your video I noticed that detail but I couldn't find a case for the t92

  • @TotalKommando

    @TotalKommando

    2 ай бұрын

    The T90/T92/T93 are all the same. As far as the differences go, the only one I really noticed is the cutout, and the grove that allows the antenna to sit flush under the battery. Worse case you reroute the antenna somewhere else, make it smaller, longer or what not just to make it fit. If you don't use WiFi or AdHoc, you can also just leave the antenna out. Hope this helps : )

  • @stingerfist
    @stingerfist4 күн бұрын

    Enjoyed this thanks! plus good heads up to catch out scammers! Do you think the OEM PSP 3000 Monster Hunter has a better build quality / feel compared to the OG PSP 1000 ? and do they both have a similar weight. I personally loved the premium / weighty feel of the original, though it is interesting many like the monster hunter one, tempted to scout one!

  • @TotalKommando

    @TotalKommando

    3 күн бұрын

    The only PSP that comes close to the 1000 in terms of thiccness and build quality is the E1000. OG 3000 MH is very nice and very prone to damage since its rubberized and plastic is thinner

  • @stingerfist

    @stingerfist

    3 күн бұрын

    @@TotalKommando Which OEM PSP do you personally feel is the best? given your fantastic collection!

  • @TotalKommando

    @TotalKommando

    3 күн бұрын

    @@stingerfist It would have to be a 3000 MH, personally I love the grip and shape on it, feels slightly thicker than the 1000 + the rubberized grip. Its lighter, takes a 2200 mAh battery. I know I may have contradicted what I said about thickness in my last comment.

  • @nordax7458
    @nordax7458Ай бұрын

    Is it generally safe to use graffers tape like that directly on the mobo? I want to fix a mushy down and right dpad that I have to press hard to register and I want to replicate your fix but first I ordered a rubber replacement for the dpad to see if it’s that.

  • @TotalKommando

    @TotalKommando

    Ай бұрын

    If you are working with an original shell, you shouldn't need to add tape, if its an original case then you might just need new rubber domes. Otherwise if its an aftermarket shell they usually don't fit perfectly, and yes its fine as long as the buttons feels right and dont feel like the buttons are giving less than a full press like its already pressed if that makes sense.

  • @nordax7458

    @nordax7458

    Ай бұрын

    @@TotalKommando cool Thankyou it’s an aftermarket clear front plate with generic buttons so I assume that is the isssue

  • @Lumago64
    @Lumago64Ай бұрын

    A body having an issue with the 3000 shell and fitting a 1000 battery in there. The bottom of the battery cover doesn't sit flush

  • @TotalKommando

    @TotalKommando

    Ай бұрын

    Some of these aftermarket batteries are thicker than normal, you can try to push the battery further in, I have the same issue with the original MH 3000 as well

  • @Lumago64

    @Lumago64

    Ай бұрын

    @@TotalKommando I'm having the same problem with my OEM battery it's kinda weird. Workaround I did today was sand down the battery just a bit so it sits as flush as possible

  • @TotalKommando

    @TotalKommando

    Ай бұрын

    ​@@Lumago64 I had similar issues with the OG shell with OG battery sometimes, i somehow failed to emphasis it more in the video I found the trick is to push the battery in further and close the door in a specific way. Also some of the ostent batteries get a tiny bit of puffiness as i have recently discovered, and my og 2200mAh battery was spicy at one point and deflated from all the pressure, still works lol

  • @Xanaxdu
    @Xanaxdu3 ай бұрын

    Has anyone made a replacement shell for the Kingdom hearts 3000 model yet?

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    I have not seen those made, the only thing I have seen is a sticker for silver models that adds the designs on the rear. And those are probably no longer in production. However I have been thinking about getting a laser engraver and try to engrave custom designs for a future video.

  • @ph8808

    @ph8808

    3 ай бұрын

    I have seen them they’re not too uncommon

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    You sure you are not mistaken them with the star ocean shells.

  • @unlimitedslash

    @unlimitedslash

    3 ай бұрын

    @@TotalKommandoStar Ocean shells? Do you have a link to those? I'm quite interested in those.

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    @@unlimitedslash Sure, here ya go: s.click.aliexpress.com/e/_DkqjRct

  • @user-ui9bk8rl9c
    @user-ui9bk8rl9c3 ай бұрын

    Is there any PSP that comes moded with USB-C Charging for Purchase?

  • @TotalKommando

    @TotalKommando

    3 ай бұрын

    Nope, but Im working on a solder free method that I will showcase in a future tutorial

  • @user-ui9bk8rl9c

    @user-ui9bk8rl9c

    3 ай бұрын

    @TotalKommando Thank You for replying! I'm definitely interested in that Video!

  • @zeroyume4328
    @zeroyume43282 ай бұрын

    Does 3000 replica shell still work with 1000 model battery?

  • @TotalKommando

    @TotalKommando

    2 ай бұрын

    Yes

  • @zeroyume4328

    @zeroyume4328

    2 ай бұрын

    @@TotalKommando thank you

  • @actionfigurefinder4611
    @actionfigurefinder4611Ай бұрын

    So what you’re saying is this monster Hunter psp 3000 is the absolute most superior PSP that you can get?

  • @TotalKommando

    @TotalKommando

    Ай бұрын

    If we are talking about buying an original non modified OG psp then yes absolutely. and if its the afternarket shell its one of the best options out there

  • @mentes1679
    @mentes16793 ай бұрын

    I need one

Келесі