Hi Nigel, Thanks so much for taking the time to do this video. Your narration was extremely well spoken and your detailed video, easy to follow. I have owned my 2013 MC Mondeo since new and it has been a fantastic car. The only three things that have ever gone wrong with it have been a faulty rear LED driving light, a faulty cruise control switch on the steering wheel and finally the door lock actuator, which I have been meaning to fix for over 2 years, Finally got around to doing it today and thanks to your video, I was able to complete the job without breaking any plastic fittings, which I find can be the biggest challenge when removing car trim. Thanks again Regards Steve
@willardlewis38872 ай бұрын
Consice and detailed demo, made work simple 👌
@charliecachia352811 ай бұрын
Huge THANKS, took mine apart after watching your video and had no trouble at all, thanks again Nigel
@poustinia5 ай бұрын
Thank you Nigel. I have a 1998 Mondeo. The passenger door is not locking, the inner lock won't push in to lock. I got so far on taking the door apart, but couldn't figure out how to get the locking mechanism out until I watched those particular steps on your video. Superb - thank you very much for taking the time to do this. You make it very clear and straightforward.
@Hamjaz2 жыл бұрын
Just want to say a huge thank you for your easy to do door lock replacement. Everything was exactly on point.... Thank you very much...
@NigelEaland
2 жыл бұрын
Thanks Abdul. I’m glad it worked out. Thanks for watching.
@andrewpurkis104912 күн бұрын
This video helped a lot. Thanks Nigel
@beforethenever972 жыл бұрын
Thank you so much for this video! With your help I had the confidence to give it a shot. And I enjoyed it! Took me about an hour trying to be careful. Job well done for £30! Cheers
@NigelEaland
2 жыл бұрын
Well done. That’s what it’s all about.
@JaspersHenri Жыл бұрын
Very clear video! Managed to get the doorlock out on our car and went a step further to see if I could fix the machanism. That didn't work out so a replacement part is on order now. Without your video I probably would have ended up paying 2-3x more in our Ford dealer garage. Cheers and again, many thanks! Greetings from Netherlands.
@JaspersHenri
Жыл бұрын
Update: sparepart arrived today. Installed (without video now) and all works again! So happy!!!! 👍🏻👍🏻👍🏻
@jamesmount31892 жыл бұрын
Hi Nigel, brilliant video, great tutorial. I used it this morning to change the mechanism in my drivers door. I was worried it might be more complicated due to the lock barrel being in place but not at all. Your video gave me the confidence to have a crack at it. It took me about an hour start to finish. Thank you so much for filming and posting it on here! James Mount
@NigelEaland
2 жыл бұрын
I’m glad it helped James and thanks for watching and taking the time to comment.
@jamesmount3189
2 жыл бұрын
@@NigelEaland, mate seriously it’s videos like yours that give people like me the confidence to have a go at jobs like this!
@emmaeaton25512 жыл бұрын
Fantastic video, thank you! I have a Smax but fairly confident that the door/locking mechanism is virtually identical. I have been putting off doing this repair for nearly 2 years and wasn't confident enough to take the lock apart. I will now be ordering the 2nd replacement and give it a bash! Thanks again
@bootsmclaughlin1438
8 ай бұрын
Drivers door was it
@tripham985 Жыл бұрын
Usefully!!! Big thanks from Vietnam. ❤️🤝 My Mondeo driver door has the same issue as yours. I am going to fix its as your direction. Thank so much again, Sir!
@paulowens51532 жыл бұрын
Thanks Nigel. did this job at the weekend on my MK4 driver door; your video made it an easy fix. keep up the good work!
@ep36233 жыл бұрын
Great instructions. Easy to follow and I was easily able to do the job. Mondeo mk4 passenger door would lock but would not unlock using the remote control. Had to reach across and use the handle inside the door to let a passenger in. Awkward. All fixed now with a second hand part fitted using these instructions. Thanks a million
@emilyjack759410 ай бұрын
Nigel, this video was amazing. Helped me fix this exact issue with a part from AliExpress (New Zealand based), was easy to follow and made the fix easy. Please keep making more videos :)
@NigelEaland
10 ай бұрын
Thanks for watching and I’m glad it helped.
@meisteryoda11225 ай бұрын
Hi Nigel 👍 Gutes Vodeo, Gut erklärt, hatte an meinem S-Max das gleiche Problem, ähnlich wie bei dir bewegte sich die Mechanik nur noch ganz gering. Durch einsprühen mit Balistol konnte ich die Funktion wieder herstellen. Hi Nigel 👍 Good video, well explained, I had the same problem on my S-Max, similar to yours, the mechanics only moved very slightly. I was able to restore function by spraying it with Balistol.
@chrissmith43653 жыл бұрын
Very good video I have been waiting for someone to do this as I have the same problem on my Mondeo I now feel like I could attempt this thank you Nigel
@frosty7933A2 жыл бұрын
Great tutorial Nigel. Just replaced front drivers side using your video, thought there may be more involved with the lock but no problems at all. 👍
@NigelEaland
2 жыл бұрын
Good job. Well done.
@PeterdrFay-zd1bx3 жыл бұрын
Hi Nigel! A great YES from Hungary! I had the same problem in state of 7 years old Mondeo. Thanks for the good lesson!
@bchenriques783 жыл бұрын
Hi Nigel. Great video! I have the same problem with my Ford S-Max 2008 but on the rear left door. I have to gain the courage to do the work... but need to buy the part first. I really enjoy your videos. Best from Portugal!
@kimtabel5971 Жыл бұрын
Nice video, well explained step by step. I might have to do the same on my Mondeo. The lock works fine, but makes a high pitch squeal noise everytime it locks which is annoying
@kimtabel5971
8 ай бұрын
Ok, now it sounds good but the door no longer locks lol
@Colspex3 жыл бұрын
Fixed my lock thanks to this video! Best wishes from Sweden!!
@iainmcfarlane1003 жыл бұрын
I'm glad I found this video, very helpful, because of you, my car did not fail the MOT.. cheers... Took a bit longer than 12 an half minutes though lol
@BigDxxxx13 жыл бұрын
Hi! Exact same thing happened to my Mk4. Stripped it down but couldn’t see problem, I assumed replacement would be expensive so I’ve just got into habit of manually locking & unlocking. I may price up 2nd hand parts in the Bay then, at least I now know it’s definitely the locking mechanism then 👍 Thanks!! Love your MK4 vids, very useful & you explain things very well buddy 😉
@NigelEaland
3 жыл бұрын
Thanks for watching and the comment. I got my secondhand replacement for about £30.
@mike-ology223 жыл бұрын
Hi Nigel, thanks for the video! It is very helpful to see how you done everything. Im having trouble with my Ford Galaxy
@paulharris20472 жыл бұрын
Good presentation, enjoyed your breakdown and build up... I watched because I have my Fiesta rear door to do next and can do with any similar install to familarize the technique. Hope I get one with an unbroken cable....
@vicentesenasperez7610 Жыл бұрын
Very helpful! Previously I made a mesh only because don't remove the torx screw on the handle😅
@jofish19672 жыл бұрын
Great video very well explained used this on my mk3 and helped to replace central locking system AMAZING video THANKS!!
@thomasvasey9519 Жыл бұрын
Thanks for your video it help me loads 👏
@iankenward692 жыл бұрын
Gr8 video m8! I need to do this!! ☺️👍
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
@ImaginariumKidStories2 жыл бұрын
Thanks for this, just finished doing the job, great instructions
@wotireckon Жыл бұрын
Thanks great video very helpful 🙂
@flemwad2 жыл бұрын
Thanks for uploading this..Just what I needed
@zakariaxoosh31693 жыл бұрын
It was useful. I needed the same job and now I know how to do it. Thanks
@HardAsFckinRock2 жыл бұрын
Great tutorial Nigel thx a lot I ve got the same problem with my mondeo 2009.
@andresperez31712 жыл бұрын
Ten points from Spain!!! Muchas gracias
@NigelEaland
2 жыл бұрын
Thanks very much.
@craigvicarey62003 жыл бұрын
Thankyou, just the video I needed for my mondy
@user-mk6ib4sg6l3 жыл бұрын
Best wishes from Russia. This video was helpful
@lukasz8012112 жыл бұрын
Thanks for this video
@aneesrana469 Жыл бұрын
Good video very helpful thanks
@Ricardo_Caracol3 жыл бұрын
Good explanation vídeo... Cheers from Portugal
@MarkSamuel19823 жыл бұрын
Thanks for a great video!
@DioOptrick Жыл бұрын
1020098 это номер моторчика замка двери, его цена 6 долларов. Весь механизм менять не обязательно, механизм надежный, достаточно разобрать, промыть-смазать механизм и заменить этот моторчик 1020098. ВНИМАНИЕ! Когда аккуратно разберете механизм замка, сфотографируйте положение всех подвижных частей, сделайте метки маркером, замените моторчик 1020098 и соберите все снова. Привет из России)
@wojciechpodsiado47343 жыл бұрын
most propably it is due to water getting into mechanism. Some of moisture is slowly working it way with the machanism. In my mk4 problem is in winter when inside handle dont open the door until the car is warm.
@eddieryan76392 жыл бұрын
Great video very helpful nidge
@ahmedmahdi41842 ай бұрын
Thanks for useful video in my case the inside locking pins it moving but very little do I have to change the whole electrical module or what
@ytcontent43713 жыл бұрын
Good job, very helpful. Greetings from Poland.
@paulclifford44693 жыл бұрын
Cheers dude excellent video
@phileverett58773 жыл бұрын
Good video Nigel. Speaking of projects, our Focus has the same problem on the drivers side. I would be happy for you to fix it in exchange for more content ;-)
@NigelEaland
3 жыл бұрын
Phil Everett you know where I live.
@stevegibson1662 Жыл бұрын
Same thing happening with mine now . Sometimes getting "drivers door open" when it's not too . This means I can't lock any doors and footlights stay on and drain battery .
@kovacsics873 жыл бұрын
Very good mr 👌
@mertada30343 жыл бұрын
Very good👍👍
@frednetherlands8873 жыл бұрын
Thank you
@bootsmclaughlin14388 ай бұрын
Brilliant video and very well put together. Can i ask what kind of money you paid for the part. I have an smax with the same problem. Is this a standard part that wiĺl come out of any ford that will fit.. thanks and allthe best
@NigelEaland
8 ай бұрын
Thanks I’m glad you liked it. Go on ebay and search for smax door lock for whichever door it’s for. I think I paid £30-£40. For me it was not worth buying new from Ford at their inflated prices.
@bootsmclaughlin1438
8 ай бұрын
@@NigelEaland will do thanks for the reply 👍
@sergeymatisen3 жыл бұрын
Great video, thank you. What is that screwdriver you are using? Going get one to make replacement by myself.
@NigelEaland
3 жыл бұрын
If you mean the ratchet screwdriver set I’ve had it for years and it’s my go to tool. It has Allen, Torx plus cross head and flat screw heads. Makes easy work of spinning out screws.
@user-yz6iw9ye8w11 күн бұрын
Anyone know if any mk4 mondeo actuator fit?
@pablosanagustincastro38683 жыл бұрын
Great video Nigel, By the way, any clues what is the color code for the door sensor of your Ford. I'm planning to bypass The door sensor for a temporary fix of the door ajar problem driver side on mine. Thanks Xx
@NigelEaland
3 жыл бұрын
The door micro switch is part of the door locking latch mechanism. I don’t know an easy way to get to the wiring to bypass and think it would be less effort to take the lock mechanism out and either use switch cleaner or replace it. See my video kzread.info/dash/bejne/oIWZpLyFYsWcpNo.html. There may be a way by which you can use the cleaner without a strip down. Take out the two top torx screw from the end of the door that hold the lock and try spraying the cleaner downwards through the holes. It may work.
@pablosanagustincastro3868
3 жыл бұрын
@@NigelEaland I will follow what you've advised. Cheers Nigel Xx
@michaelleeson6789 Жыл бұрын
1 of my rear doors will lock with the keys. But wont unlock.
@cartscandylimerickcartscan55173 жыл бұрын
Great video ; Any information on a buzzing noise coming from the booth of a ford mondeo mk4 when i turn on the lights , Hit the breaks , and reverse .
@NigelEaland
3 жыл бұрын
Do you have a tow hitch and wiring fitted as it could be the buzzer sometimes fitted to that. The other possibility is the rear parking sensor module. In the boot take the cover off to reveal the rear near side light cluster. Have a look for a box. Also try and reproduce the fault with ignition on, engine not running, lights on and get someone to press the brake pedal. Then go look for the buzz in the boot.
@proamsnookertv Жыл бұрын
nigel, i have an issue with my front pass door unlocking itself whie driving. whats your view here ? moisture, wiring. I believe it fried my central locking ecu a few months ago i think.
@NigelEaland
Жыл бұрын
My first thought is you need to scan the car for faults with Forscan and a OBD2 interface. This should highlight fault errors. Watch my video. Not sure I understand what you mean by the central locking ECU. As far as I know there isn’t one. Each door has a control module that is connected to the car’s MS CAN bus network. When you lock the car a command comes over the MS bus and each door module locks their door. Are you saying none of the doors remote lock? If it’s isolated to just the passenger door then I would look at that door’s control module. It’s unlikely to be moisture or wiring.
@proamsnookertv
Жыл бұрын
@@NigelEaland thanks for quick response, i need to obtain forescan ? i will check that module u mention. Ford replaced a failed. FORD MONDEO MK4 S-MAX 2007-2014 CENTRAL LOCKING MODULE ECU 7S7T-19G481-BC. a black ecu at footwell. I think the unlocking problem caused it, but could be wrong
@NigelEaland
Жыл бұрын
@@proamsnookertv ok. I think the control modules are behind the door panels. Forscan is a free download. It’s very good. forscan.org/download.html The OBD2 interface I use is this one. ELMconfig USB bbflyOBD BF32302... www.amazon.co.uk/dp/B074JF6YNG?ref=ppx_pop_mob_ap_share
@proamsnookertv
Жыл бұрын
@@NigelEaland thanks migel i will check out the doors module. I dont use laptops anymore, I need universal obd II cable and screen unit to also use on my chrysler voyager. something I can download forscan on to ? Can u reccomend one ?
@carlmcgowan47963 жыл бұрын
This was very useful but on my car the door will lock but wont unlock from outside the car. Do you think its the same problem that you had.???
@NigelEaland
3 жыл бұрын
If it’s just one door that is doing it then yes.
@julijaku30203 жыл бұрын
IVE got same problem
@Gefkin2 жыл бұрын
I got 2 doors gone on mine
@paulclifford44693 жыл бұрын
Have you come across the rocking drivers seat on the mk4's?
@NigelEaland
3 жыл бұрын
No
@cartscandylimerickcartscan55173 жыл бұрын
Any knowledge on where the booth release is on a mk4 mondeo saloon , Much appreciated
@NigelEaland
3 жыл бұрын
It’s part of the central locking. On your key fob is an additional button to unlock the boot. When unlocked there’s a button in the middle on the underside of the boot lid.
@leeroybrown24612 жыл бұрын
Thanks going to order part and give it a go Can u help me Central lock not working The car is telling me passenger door open so im guessing it’s the door lock
@NigelEaland
2 жыл бұрын
I think you are right. The lock mechanism has the switch which is wired to the control unit mounted on the door. It signals open or closed over the CAN network. Most likely is the switch failure.
@leeroybrown2461
2 жыл бұрын
@@NigelEaland Thanks Another thing the button on the is broke as well It will Open from the fob Not manual If you could explain in video how to do it
@NigelEaland
2 жыл бұрын
@@leeroybrown2461 button on the what?
@leeroybrown2461
2 жыл бұрын
@@NigelEaland Apologies the boot
@NigelEaland
2 жыл бұрын
@@leeroybrown2461 switch failed. See this kzread.info/dash/bejne/rKilzteoaJbKiZc.html
@cartscandylimerickcartscan55173 жыл бұрын
Sorry i Ment to say , is there a way from the inside to release the booth , iv added after market lights on the back but instead of using a multymeeter iv sliced all the wires on both sides trying to figure out what was live and earth,, NOW I'm paying for it ,, Sorry for upsetting your day
@NigelEaland
3 жыл бұрын
You can remove the lock by lifting the trim and undoing the three bolts. See this site workshop-manuals.com/ford/mondeo_2007.5_02.2007/mechanical_repairs/5_body_and_paint/501_body_and_paint/501-14_handles_locks_latches_and_entry_systems/description_and_operation/diagnosis_and_testing/general_procedures/removal_and_installation/liftgate_latch/
@bean24483 жыл бұрын
Hei Nigel! My ford mondeo 2007 door won't open with key manually and with key remote. Did u hv any tips on how can i open the car.
@NigelEaland
3 жыл бұрын
Insert the key and turn it to the left, not to the right. You should be able to open the door. Secondly change the battery in your fob. With luck it will work without programming it back to the car. If it doesn’t work then see my video about key fob battery change and programming. Good luck.
@bean2448
3 жыл бұрын
@@NigelEaland i tried but wont turn to z left
@NigelEaland
3 жыл бұрын
@@bean2448 sounds like it’s not the right key for the car. Change the fob battery and hope it works. If that doesn’t work then if you are a member of the AA or RAC then call them. They have ways of getting in past the door rubbers to hook the interior door handle.
@bean2448
3 жыл бұрын
@@NigelEaland thanks for ur help
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
@anka1984firanka Жыл бұрын
Really helpfull with your guidance it's very simple and clear job thank you 😊
Пікірлер: 116
Hi Nigel, Thanks so much for taking the time to do this video. Your narration was extremely well spoken and your detailed video, easy to follow. I have owned my 2013 MC Mondeo since new and it has been a fantastic car. The only three things that have ever gone wrong with it have been a faulty rear LED driving light, a faulty cruise control switch on the steering wheel and finally the door lock actuator, which I have been meaning to fix for over 2 years, Finally got around to doing it today and thanks to your video, I was able to complete the job without breaking any plastic fittings, which I find can be the biggest challenge when removing car trim. Thanks again Regards Steve
Consice and detailed demo, made work simple 👌
Huge THANKS, took mine apart after watching your video and had no trouble at all, thanks again Nigel
Thank you Nigel. I have a 1998 Mondeo. The passenger door is not locking, the inner lock won't push in to lock. I got so far on taking the door apart, but couldn't figure out how to get the locking mechanism out until I watched those particular steps on your video. Superb - thank you very much for taking the time to do this. You make it very clear and straightforward.
Just want to say a huge thank you for your easy to do door lock replacement. Everything was exactly on point.... Thank you very much...
@NigelEaland
2 жыл бұрын
Thanks Abdul. I’m glad it worked out. Thanks for watching.
This video helped a lot. Thanks Nigel
Thank you so much for this video! With your help I had the confidence to give it a shot. And I enjoyed it! Took me about an hour trying to be careful. Job well done for £30! Cheers
@NigelEaland
2 жыл бұрын
Well done. That’s what it’s all about.
Very clear video! Managed to get the doorlock out on our car and went a step further to see if I could fix the machanism. That didn't work out so a replacement part is on order now. Without your video I probably would have ended up paying 2-3x more in our Ford dealer garage. Cheers and again, many thanks! Greetings from Netherlands.
@JaspersHenri
Жыл бұрын
Update: sparepart arrived today. Installed (without video now) and all works again! So happy!!!! 👍🏻👍🏻👍🏻
Hi Nigel, brilliant video, great tutorial. I used it this morning to change the mechanism in my drivers door. I was worried it might be more complicated due to the lock barrel being in place but not at all. Your video gave me the confidence to have a crack at it. It took me about an hour start to finish. Thank you so much for filming and posting it on here! James Mount
@NigelEaland
2 жыл бұрын
I’m glad it helped James and thanks for watching and taking the time to comment.
@jamesmount3189
2 жыл бұрын
@@NigelEaland, mate seriously it’s videos like yours that give people like me the confidence to have a go at jobs like this!
Fantastic video, thank you! I have a Smax but fairly confident that the door/locking mechanism is virtually identical. I have been putting off doing this repair for nearly 2 years and wasn't confident enough to take the lock apart. I will now be ordering the 2nd replacement and give it a bash! Thanks again
@bootsmclaughlin1438
8 ай бұрын
Drivers door was it
Usefully!!! Big thanks from Vietnam. ❤️🤝 My Mondeo driver door has the same issue as yours. I am going to fix its as your direction. Thank so much again, Sir!
Thanks Nigel. did this job at the weekend on my MK4 driver door; your video made it an easy fix. keep up the good work!
Great instructions. Easy to follow and I was easily able to do the job. Mondeo mk4 passenger door would lock but would not unlock using the remote control. Had to reach across and use the handle inside the door to let a passenger in. Awkward. All fixed now with a second hand part fitted using these instructions. Thanks a million
Nigel, this video was amazing. Helped me fix this exact issue with a part from AliExpress (New Zealand based), was easy to follow and made the fix easy. Please keep making more videos :)
@NigelEaland
10 ай бұрын
Thanks for watching and I’m glad it helped.
Hi Nigel 👍 Gutes Vodeo, Gut erklärt, hatte an meinem S-Max das gleiche Problem, ähnlich wie bei dir bewegte sich die Mechanik nur noch ganz gering. Durch einsprühen mit Balistol konnte ich die Funktion wieder herstellen. Hi Nigel 👍 Good video, well explained, I had the same problem on my S-Max, similar to yours, the mechanics only moved very slightly. I was able to restore function by spraying it with Balistol.
Very good video I have been waiting for someone to do this as I have the same problem on my Mondeo I now feel like I could attempt this thank you Nigel
Great tutorial Nigel. Just replaced front drivers side using your video, thought there may be more involved with the lock but no problems at all. 👍
@NigelEaland
2 жыл бұрын
Good job. Well done.
Hi Nigel! A great YES from Hungary! I had the same problem in state of 7 years old Mondeo. Thanks for the good lesson!
Hi Nigel. Great video! I have the same problem with my Ford S-Max 2008 but on the rear left door. I have to gain the courage to do the work... but need to buy the part first. I really enjoy your videos. Best from Portugal!
Nice video, well explained step by step. I might have to do the same on my Mondeo. The lock works fine, but makes a high pitch squeal noise everytime it locks which is annoying
@kimtabel5971
8 ай бұрын
Ok, now it sounds good but the door no longer locks lol
Fixed my lock thanks to this video! Best wishes from Sweden!!
I'm glad I found this video, very helpful, because of you, my car did not fail the MOT.. cheers... Took a bit longer than 12 an half minutes though lol
Hi! Exact same thing happened to my Mk4. Stripped it down but couldn’t see problem, I assumed replacement would be expensive so I’ve just got into habit of manually locking & unlocking. I may price up 2nd hand parts in the Bay then, at least I now know it’s definitely the locking mechanism then 👍 Thanks!! Love your MK4 vids, very useful & you explain things very well buddy 😉
@NigelEaland
3 жыл бұрын
Thanks for watching and the comment. I got my secondhand replacement for about £30.
Hi Nigel, thanks for the video! It is very helpful to see how you done everything. Im having trouble with my Ford Galaxy
Good presentation, enjoyed your breakdown and build up... I watched because I have my Fiesta rear door to do next and can do with any similar install to familarize the technique. Hope I get one with an unbroken cable....
Very helpful! Previously I made a mesh only because don't remove the torx screw on the handle😅
Great video very well explained used this on my mk3 and helped to replace central locking system AMAZING video THANKS!!
Thanks for your video it help me loads 👏
Gr8 video m8! I need to do this!! ☺️👍
Really helpfull with your guidance it's very simple and clear job thank you 😊
Thanks for this, just finished doing the job, great instructions
Thanks great video very helpful 🙂
Thanks for uploading this..Just what I needed
It was useful. I needed the same job and now I know how to do it. Thanks
Great tutorial Nigel thx a lot I ve got the same problem with my mondeo 2009.
Ten points from Spain!!! Muchas gracias
@NigelEaland
2 жыл бұрын
Thanks very much.
Thankyou, just the video I needed for my mondy
Best wishes from Russia. This video was helpful
Thanks for this video
Good video very helpful thanks
Good explanation vídeo... Cheers from Portugal
Thanks for a great video!
1020098 это номер моторчика замка двери, его цена 6 долларов. Весь механизм менять не обязательно, механизм надежный, достаточно разобрать, промыть-смазать механизм и заменить этот моторчик 1020098. ВНИМАНИЕ! Когда аккуратно разберете механизм замка, сфотографируйте положение всех подвижных частей, сделайте метки маркером, замените моторчик 1020098 и соберите все снова. Привет из России)
most propably it is due to water getting into mechanism. Some of moisture is slowly working it way with the machanism. In my mk4 problem is in winter when inside handle dont open the door until the car is warm.
Great video very helpful nidge
Thanks for useful video in my case the inside locking pins it moving but very little do I have to change the whole electrical module or what
Good job, very helpful. Greetings from Poland.
Cheers dude excellent video
Good video Nigel. Speaking of projects, our Focus has the same problem on the drivers side. I would be happy for you to fix it in exchange for more content ;-)
@NigelEaland
3 жыл бұрын
Phil Everett you know where I live.
Same thing happening with mine now . Sometimes getting "drivers door open" when it's not too . This means I can't lock any doors and footlights stay on and drain battery .
Very good mr 👌
Very good👍👍
Thank you
Brilliant video and very well put together. Can i ask what kind of money you paid for the part. I have an smax with the same problem. Is this a standard part that wiĺl come out of any ford that will fit.. thanks and allthe best
@NigelEaland
8 ай бұрын
Thanks I’m glad you liked it. Go on ebay and search for smax door lock for whichever door it’s for. I think I paid £30-£40. For me it was not worth buying new from Ford at their inflated prices.
@bootsmclaughlin1438
8 ай бұрын
@@NigelEaland will do thanks for the reply 👍
Great video, thank you. What is that screwdriver you are using? Going get one to make replacement by myself.
@NigelEaland
3 жыл бұрын
If you mean the ratchet screwdriver set I’ve had it for years and it’s my go to tool. It has Allen, Torx plus cross head and flat screw heads. Makes easy work of spinning out screws.
Anyone know if any mk4 mondeo actuator fit?
Great video Nigel, By the way, any clues what is the color code for the door sensor of your Ford. I'm planning to bypass The door sensor for a temporary fix of the door ajar problem driver side on mine. Thanks Xx
@NigelEaland
3 жыл бұрын
The door micro switch is part of the door locking latch mechanism. I don’t know an easy way to get to the wiring to bypass and think it would be less effort to take the lock mechanism out and either use switch cleaner or replace it. See my video kzread.info/dash/bejne/oIWZpLyFYsWcpNo.html. There may be a way by which you can use the cleaner without a strip down. Take out the two top torx screw from the end of the door that hold the lock and try spraying the cleaner downwards through the holes. It may work.
@pablosanagustincastro3868
3 жыл бұрын
@@NigelEaland I will follow what you've advised. Cheers Nigel Xx
1 of my rear doors will lock with the keys. But wont unlock.
Great video ; Any information on a buzzing noise coming from the booth of a ford mondeo mk4 when i turn on the lights , Hit the breaks , and reverse .
@NigelEaland
3 жыл бұрын
Do you have a tow hitch and wiring fitted as it could be the buzzer sometimes fitted to that. The other possibility is the rear parking sensor module. In the boot take the cover off to reveal the rear near side light cluster. Have a look for a box. Also try and reproduce the fault with ignition on, engine not running, lights on and get someone to press the brake pedal. Then go look for the buzz in the boot.
nigel, i have an issue with my front pass door unlocking itself whie driving. whats your view here ? moisture, wiring. I believe it fried my central locking ecu a few months ago i think.
@NigelEaland
Жыл бұрын
My first thought is you need to scan the car for faults with Forscan and a OBD2 interface. This should highlight fault errors. Watch my video. Not sure I understand what you mean by the central locking ECU. As far as I know there isn’t one. Each door has a control module that is connected to the car’s MS CAN bus network. When you lock the car a command comes over the MS bus and each door module locks their door. Are you saying none of the doors remote lock? If it’s isolated to just the passenger door then I would look at that door’s control module. It’s unlikely to be moisture or wiring.
@proamsnookertv
Жыл бұрын
@@NigelEaland thanks for quick response, i need to obtain forescan ? i will check that module u mention. Ford replaced a failed. FORD MONDEO MK4 S-MAX 2007-2014 CENTRAL LOCKING MODULE ECU 7S7T-19G481-BC. a black ecu at footwell. I think the unlocking problem caused it, but could be wrong
@NigelEaland
Жыл бұрын
@@proamsnookertv ok. I think the control modules are behind the door panels. Forscan is a free download. It’s very good. forscan.org/download.html The OBD2 interface I use is this one. ELMconfig USB bbflyOBD BF32302... www.amazon.co.uk/dp/B074JF6YNG?ref=ppx_pop_mob_ap_share
@proamsnookertv
Жыл бұрын
@@NigelEaland thanks migel i will check out the doors module. I dont use laptops anymore, I need universal obd II cable and screen unit to also use on my chrysler voyager. something I can download forscan on to ? Can u reccomend one ?
This was very useful but on my car the door will lock but wont unlock from outside the car. Do you think its the same problem that you had.???
@NigelEaland
3 жыл бұрын
If it’s just one door that is doing it then yes.
IVE got same problem
I got 2 doors gone on mine
Have you come across the rocking drivers seat on the mk4's?
@NigelEaland
3 жыл бұрын
No
Any knowledge on where the booth release is on a mk4 mondeo saloon , Much appreciated
@NigelEaland
3 жыл бұрын
It’s part of the central locking. On your key fob is an additional button to unlock the boot. When unlocked there’s a button in the middle on the underside of the boot lid.
Thanks going to order part and give it a go Can u help me Central lock not working The car is telling me passenger door open so im guessing it’s the door lock
@NigelEaland
2 жыл бұрын
I think you are right. The lock mechanism has the switch which is wired to the control unit mounted on the door. It signals open or closed over the CAN network. Most likely is the switch failure.
@leeroybrown2461
2 жыл бұрын
@@NigelEaland Thanks Another thing the button on the is broke as well It will Open from the fob Not manual If you could explain in video how to do it
@NigelEaland
2 жыл бұрын
@@leeroybrown2461 button on the what?
@leeroybrown2461
2 жыл бұрын
@@NigelEaland Apologies the boot
@NigelEaland
2 жыл бұрын
@@leeroybrown2461 switch failed. See this kzread.info/dash/bejne/rKilzteoaJbKiZc.html
Sorry i Ment to say , is there a way from the inside to release the booth , iv added after market lights on the back but instead of using a multymeeter iv sliced all the wires on both sides trying to figure out what was live and earth,, NOW I'm paying for it ,, Sorry for upsetting your day
@NigelEaland
3 жыл бұрын
You can remove the lock by lifting the trim and undoing the three bolts. See this site workshop-manuals.com/ford/mondeo_2007.5_02.2007/mechanical_repairs/5_body_and_paint/501_body_and_paint/501-14_handles_locks_latches_and_entry_systems/description_and_operation/diagnosis_and_testing/general_procedures/removal_and_installation/liftgate_latch/
Hei Nigel! My ford mondeo 2007 door won't open with key manually and with key remote. Did u hv any tips on how can i open the car.
@NigelEaland
3 жыл бұрын
Insert the key and turn it to the left, not to the right. You should be able to open the door. Secondly change the battery in your fob. With luck it will work without programming it back to the car. If it doesn’t work then see my video about key fob battery change and programming. Good luck.
@bean2448
3 жыл бұрын
@@NigelEaland i tried but wont turn to z left
@NigelEaland
3 жыл бұрын
@@bean2448 sounds like it’s not the right key for the car. Change the fob battery and hope it works. If that doesn’t work then if you are a member of the AA or RAC then call them. They have ways of getting in past the door rubbers to hook the interior door handle.
@bean2448
3 жыл бұрын
@@NigelEaland thanks for ur help
Really helpfull with your guidance it's very simple and clear job thank you 😊
Really helpfull with your guidance it's very simple and clear job thank you 😊
Really helpfull with your guidance it's very simple and clear job thank you 😊
Really helpfull with your guidance it's very simple and clear job thank you 😊
Really helpfull with your guidance it's very simple and clear job thank you 😊