/ dubsdaily__
Due to me already having a video up on a quick release install I made this one short and sweet for my viewrs. But these time, no explaining. Everything is straight to the point! But below I will make a list of tools and items used to complete this set up and make the horn functional!
Tools used for removal/installation:
T30 Torx (bit or driver)
Number 2 Phillips (bit or driver)
14mm Socket
Ratchet
Tools used for the horn:
Wire strippers
Heat gun
Soldering Heat Shrink
Wire Ring Terminal
Quick Release Set Up:
Momo Prototipo Black Edition
Momo Quick Release
Amazon Short Hub This short hub allowed me to keep my factory clockspring!
Horn set up:
Used the blue wire that from the clock spring that connects to the factory steering wheel to ground the horn switch. Connected that wire to the red wire for the quick release, then from the quick release to the horn button positive. From the horn button ground I connected the train of black wires back to the hub and crimped a ring terminal to the last ground wire, and bolted that down to one of the bolts for the short hub to complete the circuit when activated!
Hope this information was helpful! Stay tuned for more videos!!
Thanks for watching :)
#acura #acurarsx #dc5 #honda #jdm #diy #quickrelease #steeringwheel #momo