I really appreciate tutorials like this. I have two nit-picks to suggest. For those who have never done faucet changing before, please remind them to turn the water off below the sink before beginning. Secondly, I highly suggest pulling the lever to stop the sink up before beginning any sink project. Any tiny screw or tid-bit will certainly find its way to the drain if given half a chance when dropped!

Thank you. I just replaced the handle with the help of this video. Called moen and they sent me all the parts for free. Excellent customer service!!

Very Helpful instructions! Plus the tip to call Moen for the replacement cartridges is greatly appreciated. Just repaired all 3 of my bathroom sinks. Went extremely smooth.

@EveryBladeOfGrass1

4 ай бұрын

Congrats on the repair!

Excellent description explaining the installation process especially how to overcome potential snags.

@EveryBladeOfGrass1

6 ай бұрын

Thanks for the kind words, glad it was useful

Excellent tutorial! You saved me a lot of heartache, especially after trying to figure out the pictograph instructions that came with the cartridge. Thank you!!!

@EveryBladeOfGrass1

Жыл бұрын

Glad it was helpful for you!

This was very helpful in repairing my 20 year old faucet. Much appreciated!

@EveryBladeOfGrass1

7 ай бұрын

Thanks for the kind words I’m glad you were able to repair it yourself!!

So very helpful! Thank you so much!! You should be a prof! Crystal clear, very detailed!

@EveryBladeOfGrass1

2 жыл бұрын

Thank you. I’m glad it could be of some use to you!

Thanks...worked like a charm. Video was long, because you answered all the questions anyone may have, before they even knew to asked it. Nice work 👍

@EveryBladeOfGrass1

2 жыл бұрын

Hey thanks! Glad it could be of some use to you.

Thanks for the video. I had to change a cartridge in a bathroom sink today and your example made it quick and painless.

@EveryBladeOfGrass1

8 ай бұрын

Great job! Glad it helped

Your Video was superb!! All the needed details were thoroughly explained with extra emphasis on challenging steps. Getting the old cartridge out was extremely difficult. On mine the two rubber covers at the bottom of old cartridge disloged and make the extraction all most impossible. With some time I came back to the project and used some leverage to remove the old cartridge. After that the process went fairly smooth. Thanks alot for the video, it made this project possible.

@EveryBladeOfGrass1

Жыл бұрын

I know those old cartridges can be a bear. Congrats on sticking it out and getting it done yourself!

@timr9660

4 ай бұрын

Mine did the same, bought the puller for $20 and consider it worth it.

Just used this video to replace the Moen faucet cartridge in my daughter's guest bathroom. Great descriptions! No more leaky faucet!

@EveryBladeOfGrass1

5 ай бұрын

Congratulations on your repair! I’m glad it was useful for you

Thank you for making this video. Your instructions helped me save time, effort and cost in replacing my faucet cartridge.

@EveryBladeOfGrass1

6 ай бұрын

Great I’m glad it was helpful to you

Very well explained, I couldn’t find a video that was that style faucet but your video helped thank you

@EveryBladeOfGrass1

6 ай бұрын

Glad it helped!!

Thank you very much. Explaining that the tab has to catch under the gray plastic was the part I was missing. faucet works great now.

@EveryBladeOfGrass1

Жыл бұрын

Thanks glad it was useful for you

Thank you so much!! Thank you for going into the little details and giving tips about problems/challenges we might encounter while going through the steps. We successfully fixed our leaky faucet. Thanks again!

@EveryBladeOfGrass1

2 жыл бұрын

I’m glad it could be of help, congrats on your repair!

Thanks so much. A very detailed how-to repair video. BTW, Moen currently provides a free replacement kit(4 “O” rings and 2 plastic shields w/ lubricant) for the 1225 cartridge). No complete replacement, so don’t discard the old cartridge. FYI.

@EveryBladeOfGrass1

2 жыл бұрын

Good to know, ours were so old that it made sense to replace it with new. Plus it was free from Moen!!

@nawmean

2 жыл бұрын

Who did you contact to get the free replacement kit for the 1225 cartridge?

@EveryBladeOfGrass1

2 жыл бұрын

@@nawmean I went to Moen’s website and got the number from the contact page

Thank you as well for this video! It was perfect. Supported my fix, cost me $29 for the part and saved me $350 for a high robbery plumber :-) ... Thanks!!!

@EveryBladeOfGrass1

8 ай бұрын

Congrats on doing it yourself!

Excellent tutorial…nicely paced and shows enough detail to plan the repair. Much thanks!

@EveryBladeOfGrass1

6 ай бұрын

Glad you found it helpful

Thanks for the video, helped a lot. Though my set screw looks like a security screw, was able to get it off. And I had to buy the puller they sell, no way that old cartridge was coming out with just vise grips. I have 3 more of the same faucets in my hose so will keep it for when they need replacement.

@EveryBladeOfGrass1

4 ай бұрын

Glad it was helpful, these things can be a real bear sometimes

Good job. Good Detail. Two suggestions. Make sure to suggest they turn off the water supply valves first. Also, a good idea to close the popup drain so you can't loose the screw or washer down the drain, into the trap below. Thanks.

@EveryBladeOfGrass1

Ай бұрын

Yeah those are good tips !!

Thank you, I appreciate your detailed video. I had a leaky faucet, your video helped me fix the issue in under 10mins.

@EveryBladeOfGrass1

2 жыл бұрын

Awesome! glad it helped

Thanks! Everything I needed in one video

@EveryBladeOfGrass1

6 ай бұрын

Glad it helped!

This video was really helpful. I couldn't reassemble the faucet to get the lifting handle under the plastic ring until I watched you video. Simple but frustrating. Ours is also 20 years old but needed some lube, not the cartridge, yet.

@EveryBladeOfGrass1

3 ай бұрын

Glad it was useful for you congrats on your repair

Thanks for the information! Got Cartridges Free! Didn’t know that! Again thank you 🙏!

@EveryBladeOfGrass1

Ай бұрын

Happy to help!

Excellent tutorial! Thank you SO much! Your expertise got me through the job. Works like a new one!

@EveryBladeOfGrass1

10 ай бұрын

Glad it helped you do it yourself!

One of the best instructional videos i have watched. Worked perfectly!

@EveryBladeOfGrass1

Жыл бұрын

Thanks for the kind words! Glad it was helpful for you.

Thank you for the in-depth video. You did a great job and now I can tackle my own Moen bathroom faucet provided I can get the part!

@EveryBladeOfGrass1

Жыл бұрын

Most hardware stores will have it but if you can’t find it call Moen and they will help you

Excellent video. I could follow the instructions and the advice on how to get the cold/hot in the proper location.

@EveryBladeOfGrass1

Жыл бұрын

That’s great!! I’m glad it was of use to you

Your video was so helpful for me . Thank you so much.

@EveryBladeOfGrass1

4 ай бұрын

Thanks for the kind words, glad it helped

Big help and couldn't have done it so easily without this!

@EveryBladeOfGrass1

2 жыл бұрын

Glad it could help you out!

We’ll instructed ! Thanks

Thank you. I was able to replace the cartridge in my bathroom sink.

@EveryBladeOfGrass1

2 ай бұрын

Congrats on your repair!!

Very nice educating video. Thanks.

@EveryBladeOfGrass1

10 ай бұрын

hope it helped you some

I appreciate the excellent detailed video.

@EveryBladeOfGrass1

3 ай бұрын

Glad you enjoyed it!

Thanks for the video dude, just fix my bathroom sink🍻🍻

@EveryBladeOfGrass1

4 ай бұрын

Great job on doing it yourself!!

Great video. Explained everything and was easy to follow.

@EveryBladeOfGrass1

3 ай бұрын

Glad it worked for you!!

the faucet kicked my butt today. cant wait for my rematch tomorrow. thanks for the intel

@EveryBladeOfGrass1

Жыл бұрын

Lol don’t give up Victory is near

@retiredluvit4100

Жыл бұрын

@@EveryBladeOfGrass1 issue: after reassembly. water comes from the tap even though it is the off position. where did i go wrong? i mean beside being a dummy

@EveryBladeOfGrass1

Жыл бұрын

@@retiredluvit4100 you may have the holes at the bottom of the cartridge misaligned go to 11:30 or so in the vid to reference what that is hopefully that is all it is

@retiredluvit4100

Жыл бұрын

@@EveryBladeOfGrass1 thanks. will make the adjustment

@EveryBladeOfGrass1

Жыл бұрын

@@retiredluvit4100 good luck

Thank you for sharing this very detailed video this saved me over $300.00 🙏

@EveryBladeOfGrass1

10 ай бұрын

Glad it helped! Congrats on the repair

Very detailed good instructions. I use divers silicon all over rubber parts of cartridge before reinsertion,

@EveryBladeOfGrass1

Жыл бұрын

Thanks I’ll have to check out diver’s silicone

I have the exact same facet, used a 1225 cartridge ( no 1225 b available) and it works perfectly now. Thks for the video 👍🏻

@EveryBladeOfGrass1

2 жыл бұрын

You know I bet a lot of their cartridges are interchangeable, good job on fixing it yourself!

@ashrafshaker2983

Жыл бұрын

1225 and 1225B are the same, B is for Bulk packaging.

Excellent tutorial!

@EveryBladeOfGrass1

4 күн бұрын

Thank you!

Great video, very well done. Only snag, I installed the cart the direction you did, and my hot and cold are reversed. I don't have time to go back into it, so, II will deal with it until I have time for a do-0ver.

@EveryBladeOfGrass1

Ай бұрын

Oh man that’s a bummer

Best instructive video for this problem. Thank you

@EveryBladeOfGrass1

Жыл бұрын

Thanks for the kind words

Very detailed, helpful and informative- thank you.

@EveryBladeOfGrass1

6 ай бұрын

Glad it was helpful!

Yes .. thank you for this video !!! And be careful with the directions that come with the replacement cartridge !! ..I made the mistake of twisting the last piece of the disassembly before pulling the copper retaining pin !!!! It looked like this was a necessary step when following the directions … it WASN’T !!!!!

@EveryBladeOfGrass1

6 ай бұрын

Thanks for the warning sometimes the directions aren’t the best

Great video. Very helpful, thank you.

@EveryBladeOfGrass1

6 ай бұрын

Glad it was helpful! Thanks

Best use of video camera, great explanation. Convinced me to call a plumber!

@EveryBladeOfGrass1

2 жыл бұрын

Lol thanks for the kind words

Awesome video. Exactly what I needed. Thank you very much. ( first comment I’ve ever left on you tube ! )

@EveryBladeOfGrass1

4 ай бұрын

Glad it helped!

A very helpful video. Thanks for sharing your knowledge.

@EveryBladeOfGrass1

6 ай бұрын

Glad it was of some help for you!!

Well, huge thanks to the video maker, I followed all the steps but I did not have the new cartridge...so, I cleaned up everything and when I put all back together the drip was gone! Luckily, my issue was lack of maintenance and some parts that were loose. And on top my wife now thinks I am a genius - my last home repair did not go too well; I needed this.

@EveryBladeOfGrass1

Жыл бұрын

😂 glad it helped! A win is a win!

Thank you so very much. I now have the courage to try this on my own. 👍

@EveryBladeOfGrass1

Жыл бұрын

Just keep at it and go slow and I’m sure you will have great success!

Glad it helped! Congrats on your repair

Thanks a bunch bud, figured I would play plumber to make wifey happy and safe a bit of money. Your video of the same tap is a God send. Thanks a bunch

@EveryBladeOfGrass1

Жыл бұрын

Glad it could be of some use for you. Hope the repair goes well!

@sheldonbueckert5477

Жыл бұрын

@EveryBladeOfGrass1 ended your having to buy a new tap, after 15 yrs the cartridge was just to seized to come out. Spent 2 hrs fighting to remove it, till this man had to throw the towel in and admit defeat and buy a new one. Oh well try to save money and ended up spending more. Can't win them all. Anyway good video either way, take care and hope others have better luck than I did.

@EveryBladeOfGrass1

Жыл бұрын

@@sheldonbueckert5477 hey be proud that you tried to do it most people don’t.

Great video. Funny, I tried calling Moen here in Ontario, Canada in 2021 when Home Depot opened up again and I could not get through to any customer service at Moen. I hope things have changed since then.

@EveryBladeOfGrass1

9 ай бұрын

My experience with them was great sorry it was different for you

@jlouutube65

7 ай бұрын

I recently sent Moen a photograph of our tap and they sent me the cartridge...sad I had to wait for the pandemic to be over to get that...oh well. Thank you for your very helpful video...hubby and I got through it without a fight! ;)@@EveryBladeOfGrass1

Wow this helped very well thankyou

@EveryBladeOfGrass1

3 ай бұрын

I'm glad it was of some use for you!

Thank you very much, so helpful Project 🙏

@EveryBladeOfGrass1

Жыл бұрын

Glad it was useful for you!

Thank you for this video. I completed the job and the drip is gone, but the cold water side is now barely above a trickle. Both valves under the sink are fully open so that is not the cause. Any thoughts on what the issue could be?

@EveryBladeOfGrass1

7 ай бұрын

You may have the cartridge slightly misaligned go to approximately 11:45 in the vid to see the holes in the cartridge. You may need to twist it so that the bottom holes will align and let in the correct amount of water

Orientation of cartridge was great

@EveryBladeOfGrass1

Жыл бұрын

Thanks I’m glad it was helpful

Had problems reinserting pin into new cartridge. Turns out the black rubber off the bottom of the old cartridge tore off inside the faucet itself and prevented new cartridge from being fully seated. I pulled out bits of rubber and then the pin engaged. Whew. I’ll try to include a picture. Thanks for your help.

@EveryBladeOfGrass1

2 жыл бұрын

Glad you were able to get the problem solved, great job

Excellent instructions! Thank you so much!

@EveryBladeOfGrass1

Жыл бұрын

Great! Glad it was useful for you

Excellent - saved me a lot of money. Thanks!

@EveryBladeOfGrass1

2 жыл бұрын

Great to hear, congrats on fixing it yourself!

I like how you explain details the clip is giving me a hard time to align.

@EveryBladeOfGrass1

7 ай бұрын

Thanks, those clips can be tricky

This helped me replace mine. Thank you!

@EveryBladeOfGrass1

Жыл бұрын

Glad it worked for you

Brilliant. Thank you.

@EveryBladeOfGrass1

6 ай бұрын

You're very welcome!

Thank you for your very clear, detailed instructions! Do you happen to know this faucet model name? I think my parents have the same model and I can't find the name of it.

@EveryBladeOfGrass1

7 ай бұрын

No I don’t know the name but if you call Moen customer service they’ll be able to help you. I found them to be very helpful. While on the phone with them I was able to text pictures and get help. Good luck with your repair

Great info, helped a ton. Thanks.

@EveryBladeOfGrass1

8 ай бұрын

Glad to hear it!

That grey plastic right before catridge is not moving at all what do do?

@EveryBladeOfGrass1

4 күн бұрын

If it is stuck because of mineral deposits you could use vinegar or a CLR remover

thanks your tips are the best and you are great

@EveryBladeOfGrass1

Жыл бұрын

Thanks for the kind words

I'm trying to take the Phillips screw out, but it's just spinning. Any ideas?

@EveryBladeOfGrass1

2 ай бұрын

You may have to use a small putty knife to wedge under the screw head and pry up as you unscrew it

Excellent, thank you for the vid. Moen sent the parts and I’ll get on the repair soon😎

@EveryBladeOfGrass1

Жыл бұрын

Glad it was helpful for you, good luck on the repair

my issue is the center brass stem moves up and down about a 1/4 inch and i dont know why, any ideas?

@EveryBladeOfGrass1

6 ай бұрын

The stem is supposed to move up and down that amount see 13:00 to see if we are talking about the same thing. If not I’m not sure

Thank you

Your video was so helpful!

@EveryBladeOfGrass1

2 жыл бұрын

Glad you got some help from it!

Thank you for the video. A problem I can't resolve is that the lever keeps on going down on its own and turning off the water. It only stays up when all the way to the left for maximum hot water or all the way to the right. Have you seen this problem? And it has happened twice even when replacing all the interior elements.

@EveryBladeOfGrass1

2 жыл бұрын

Around 3:40 in the video I show a white plastic part , it could possibly be that it is broken?? Other than that not too sure. Hope it is of some help

Great video better than Moen's

@EveryBladeOfGrass1

26 күн бұрын

Thanks for the kind words

My plastic gray thing just keep spinning (after a lot of effort and CLR) but it is not lifting out. Any tips?

@nigelwb

2 ай бұрын

Mine might be different. The gray thing and that white part that sticks up in the top look like they are combined into one gray piece (no white part).

@EveryBladeOfGrass1

2 ай бұрын

I’m not sure but if it just spins the threads may be stripped so that it “won’t move up” other than that I don’t know. You can call Moen I’ve found them to be very helpful, good luck

Very good

Any tips for getting the Philips screw out? Mine just twists, but won't come out

@EveryBladeOfGrass1

9 ай бұрын

it sounds like it is stripped you may have to try to wedge something under the screw but that may be near impossible good luck

@Rachel-ct2mp

9 ай бұрын

@@EveryBladeOfGrass1 Yeah. I gave up and replaced the whole thing. It's been there since the mid-90s, so it's had a good run. Thanks for the great video and response!

Having difficulty reinserting the retainer clip. Can't line up through the white plastic piece and the faucet body. Any suggestions to align the retainer clip?

@EveryBladeOfGrass1

Жыл бұрын

The only thing I can say is sometimes it can be a little fiddly to get the cartridge aligned correctly. You may need to twist the cartridge a little to the left, or to the right, so that the retaining clip will be able to line up again. Sorry you had difficulty. Hope this helps

Very helpful video.

@EveryBladeOfGrass1

2 жыл бұрын

Thanks glad it was of use for you

What model faucet is that?

@EveryBladeOfGrass1

Ай бұрын

That I don’t know

Do you need to shut off the water to do this?

@EveryBladeOfGrass1

2 жыл бұрын

Yes you do

For those who have dark grey you don’t have to pull out it stays in

What’s the part name of 18:17

@EveryBladeOfGrass1

Жыл бұрын

Im not sure what it is called sorry

Thank you man !! 2 more to go 😅

@EveryBladeOfGrass1

2 жыл бұрын

Nice glad it could be of some use

all the details

@EveryBladeOfGrass1

Жыл бұрын

Thanks

You forgot to say is, FIRST you turn off the water.

@EveryBladeOfGrass1

Жыл бұрын

Lol that’s what is called a teachable moment

@careycasey2523

9 ай бұрын

Just turn off the angle stop

Save me money.

@EveryBladeOfGrass1

Жыл бұрын

Nicely done

What if u don't have that white cap tool thing that loosens the cartridge? I've been trying to pry this thing out

@EveryBladeOfGrass1

Жыл бұрын

You could probably use some pliers. You also may be able to get that little cap at Home Depot or Lowe’s

Excellent tutorial!

@EveryBladeOfGrass1

2 жыл бұрын

Thank you for the kind words!