You've inspired me to try a few new things, brother!! Thanks for sharing.
@forkshootertb96
6 күн бұрын
@@axsomoutdooradventures Thanks AODA! It’s a new experiment for me as well. Don’t know how long the tubes will last in this set up. That’s why it’s always good to wear eye protection. Have a great Fourth of July!
@slingin-clay7 күн бұрын
Awesome looking attachment method brother, I like that a lot!!👍🔥👊
@forkshootertb96
7 күн бұрын
Thanks Andy! I borrowed some ideas and put them together. Don't know how durable they'll be like that. Just have to try it and see.
@manofkentcatapultsgunsando50697 күн бұрын
Best way for shooting quick i reckon, my big ol tubes last forever on a natural frame like that , i just countersunk the holes at the top 👍👍 good job
@forkshootertb96
7 күн бұрын
Thanks mate! You are very good with that fork as well!
@zwillenfink97297 күн бұрын
great idea🙂👍
@forkshootertb96
6 күн бұрын
Thanks Barnim! I don’t know how long the tubes will last like that but time will tell.
@ChuckinSteel7 күн бұрын
That looks super nice
@forkshootertb96
7 күн бұрын
Thanks brother! I did a rough job on it. I was just experimenting on it to see how that would hold the tubes. I misspoke. Those are 1636 tubes. I think 2040 would go in that same hole. Might have to use a string to pull it through the top hole. IDK how long the tubes will last like that. Just have to try it and see.
@canvandal45035 күн бұрын
I like that! If you perfect one let me know! 👊
@Ropa_Redefined7 күн бұрын
That's pretty slick. I like it!
@forkshootertb96
7 күн бұрын
Thanks Robert! IDK how the tubes will wear but time will tell.
@kevinwilliamlowe30507 күн бұрын
Still quick! Now that’s an idea with the top holes. Reckon it will wear the tubes more or less at the top?
@forkshootertb96
7 күн бұрын
Thanks KWL! I don't know how long they'll last. I think taking a little counter sink reamer and cleaning that top edge up couldn't hurt. IDK how you'd get to the under side. Maybe thin strip of sand paper through the hole.
@trapperdes7 күн бұрын
Nice modification!
@forkshootertb96
7 күн бұрын
Thanks Danny!
@jeremytyler7843Күн бұрын
BigDH2000 did not come up with the Wave attachment method, Peppermack did. He also made a few frames with the hole out the top like you have on that Spitfire.
@forkshootertb96
Күн бұрын
Thanks Jeremy! I should have worded that different. What I should have said was I borrowed and idea for a modified version Bigdh2000 did with the wave attachment. Mostly to do with having the slot beside the hole but going back I still didn't cut the slot where he did. Here's his take on it. kzread.info/dash/bejne/a4aI1qOvmbXLY7w.html
@jeremytyler7843
Күн бұрын
@@forkshootertb96 No worries. Peppermack hasn't made a frame in a while and a lot of people have forgotten about him.
@rexspurlock7 күн бұрын
On target 👊🏻
@forkshootertb96
7 күн бұрын
Thanks Rex! I was close shooting at a big target haha! Not as impressive as it looked.
Пікірлер: 25
You've inspired me to try a few new things, brother!! Thanks for sharing.
@forkshootertb96
6 күн бұрын
@@axsomoutdooradventures Thanks AODA! It’s a new experiment for me as well. Don’t know how long the tubes will last in this set up. That’s why it’s always good to wear eye protection. Have a great Fourth of July!
Awesome looking attachment method brother, I like that a lot!!👍🔥👊
@forkshootertb96
7 күн бұрын
Thanks Andy! I borrowed some ideas and put them together. Don't know how durable they'll be like that. Just have to try it and see.
Best way for shooting quick i reckon, my big ol tubes last forever on a natural frame like that , i just countersunk the holes at the top 👍👍 good job
@forkshootertb96
7 күн бұрын
Thanks mate! You are very good with that fork as well!
great idea🙂👍
@forkshootertb96
6 күн бұрын
Thanks Barnim! I don’t know how long the tubes will last like that but time will tell.
That looks super nice
@forkshootertb96
7 күн бұрын
Thanks brother! I did a rough job on it. I was just experimenting on it to see how that would hold the tubes. I misspoke. Those are 1636 tubes. I think 2040 would go in that same hole. Might have to use a string to pull it through the top hole. IDK how long the tubes will last like that. Just have to try it and see.
I like that! If you perfect one let me know! 👊
That's pretty slick. I like it!
@forkshootertb96
7 күн бұрын
Thanks Robert! IDK how the tubes will wear but time will tell.
Still quick! Now that’s an idea with the top holes. Reckon it will wear the tubes more or less at the top?
@forkshootertb96
7 күн бұрын
Thanks KWL! I don't know how long they'll last. I think taking a little counter sink reamer and cleaning that top edge up couldn't hurt. IDK how you'd get to the under side. Maybe thin strip of sand paper through the hole.
Nice modification!
@forkshootertb96
7 күн бұрын
Thanks Danny!
BigDH2000 did not come up with the Wave attachment method, Peppermack did. He also made a few frames with the hole out the top like you have on that Spitfire.
@forkshootertb96
Күн бұрын
Thanks Jeremy! I should have worded that different. What I should have said was I borrowed and idea for a modified version Bigdh2000 did with the wave attachment. Mostly to do with having the slot beside the hole but going back I still didn't cut the slot where he did. Here's his take on it. kzread.info/dash/bejne/a4aI1qOvmbXLY7w.html
@jeremytyler7843
Күн бұрын
@@forkshootertb96 No worries. Peppermack hasn't made a frame in a while and a lot of people have forgotten about him.
On target 👊🏻
@forkshootertb96
7 күн бұрын
Thanks Rex! I was close shooting at a big target haha! Not as impressive as it looked.
I’ll take it lol 👊🏻
To me it would shoot about the same as tabs
I misspoke. The tubes are 1636.