Model Flying Fortress B-17G - 1/72 Airfix - Wash
Ғылым және технология
Today I will make an oil wash on this model. Panel lines and soot/fuel stains.
Please consider supporting my channel. You can do it by clicking the link below:
/ @big-modeller
For more info:
/ bigmodeller
/ bigmodeller
/ big.modeller
/ bigmodeller
Пікірлер: 60
Great job on the B-17 and a fantastic job on that weathering, it really brings the plane to life and makes it POP! Have fun my friend, Joe
@Big-Modeller
7 жыл бұрын
Fun is most essential in every hobby, thanks :)
Super wyszło. Zawsze się boję, że nie dasz rady zetrzeć tego washa, a Tobie za każdym razem świetnie to wychodzi. Powodzenia przy dalszych pracach! ;)
@Big-Modeller
7 жыл бұрын
Wash schodzi gładziutko, nawet bez rozpuszczalników. Następnym razem zachowaj proszę spokój, wszystko będzie dobrze ;).
@JedenSiedemDwa
7 жыл бұрын
Postaram się. ;)
Great work, thanks for sharing
@Big-Modeller
7 жыл бұрын
Thanks :) I'm here to share
Looking awesome cant wait for the final
@Big-Modeller
7 жыл бұрын
Thanks, me too :) there's not much left to do
You are a true master great work big modeler
@Big-Modeller
7 жыл бұрын
I just make models, but thanks for the good word :)
Great video, thinking of getting back into this after 30 years. Any advice as to what would be needed a. Starter kit or do you have a video showing your setup? Things like paints, thinners, airbrush, sanding tools, everything to get up and running from scratch
@Big-Modeller
5 жыл бұрын
Enough thinking about getting back. Just do it :) Buy yourself a kit, but chose something new, I mean a kit designed after 2010. Many companies have starter sets - with paintbrushes and paints, it's worth considering if you have no tools yet. And those sets have proper difficulty for a new modeller. I can recommend to check out Airfix's products, but other companies make such models too. As for other tools - go to your nearby drugstore for sanding sticks and cutters. Try online scale modelling shops for glue, hobby knife and putty (and basically everything :)). But start from the beginning, which is an easy model set, you'll see how enthusiasm will guide you into the great world of scale modelling ;)
Fajnie wygląda. Ja robię coś pomiędzy wasch-em a filtrem i nakładam tylko w kierunku spływu . ( powierzchnia to pół mat )
@Big-Modeller
7 жыл бұрын
Tutaj powierzchnia musiała być błyszcząca. Specjalnie robiłem ten etap na sam koniec, żeby już nie musieć nakładać lakieru błyszczącego i żeby okopcenie zostało naturalnie matowe.
Congratulations on your perseverance in running the channel even though you have few viewers like PLAZMO. I still believe that you can have more viewers. Good luck :)
@Big-Modeller
7 жыл бұрын
I never hoped to have such many viewers. When I started this channel I wasn't sure if anyone would want to watch it. I hope my movies will still amuse you all :)
Świetna robota. Czekam na koniec
@Big-Modeller
7 жыл бұрын
Teraz już z górki ;).
Thankyou for sharing great job,,,can you plz tell me after you finished the weathering in this vid,,,did you give it a coat of clear varnish or did u just leave it
@Big-Modeller
5 жыл бұрын
It got a clear coat after decals and panel lining, but then I added oil exhaust smoke by engines without covering it with clear coat (I wanted those smoke stains to stay matt).
Czy po nałożeniu kalki, a przed olejami kładziesz jeszcze lakier? Jeśli tak, to jaki? Z góry dziękuję za odpowiedź.
@Big-Modeller
7 жыл бұрын
Tak, zabezpieczam kalkę lakierem bezbarwnym. Zwykle kładę Sidolux albo jakiś inny akrylowy lakier, jak na przykład Humbrol Clear.
Enjoy ur videos Sir. Can you or anybody recommend a good starter plane to build I like the B-17. I've never done plastic modeling. I'm a retired Rc racer and have most the tools. Thanks Cheers
@Big-Modeller
5 жыл бұрын
Hi there :) I'm glad you've enjoyed my work, sir. As for the starter kit... B-17 is quite a complicated plane, like most of the bombers. I'd rather recommend starting this hobby with some WW2 fighter. There's a lot of starter kits in Airfix's range. Get some experience there, and you'll be making bombers in no time :)
Отлично!!!! Поздравляю!!!
@Big-Modeller
7 жыл бұрын
Thanks :)
Bardzo dobrze! How long do you allow the clear coat to dry before you apply the wash? Dziekuje.
@Big-Modeller
4 жыл бұрын
The producer suggests waiting 6 hours for the coat to set, but to be sure I've left it overnight.
@jamesdziendziel9187
4 жыл бұрын
@@Big-Modeller Thank you.
Very nice. Subtle. I was worried when you put all that oil paint on for the exhaust stains but it looks really good. Have you tried artists pastels? They can work well.
@Big-Modeller
7 жыл бұрын
No, I haven't tried pastels yet. I'm still amazed by the oils ;).
@328Watcher
7 жыл бұрын
They do look pretty good so I wouldn't be in a hurry to change.
Ekstra jak zawsze. Długo kazałeś czekać na kolejny odcinek. Widzę że też jesteś zwolennikiem washy tzw tradycyjnych. Nie modnych ostatnio gotowców. Sam mam kilkanaście tubek olejnych zawsze można zrobić odpowiedni kolor samemu. Co to za ślady jak po zębach na lewym stateczniku poziomym? pozdrawiam
@Big-Modeller
7 жыл бұрын
Też ubolewam, że nie mogę poświęcić modelarstwu tyle czasu ile bym chciał... Ślady to pewnie otarcia po zderzeniu z Messerschmittem ;)
Awesome work! How long did you leave the wash to dry before you rubbed it off? And how do you manage to get the oil paint to look like exhaust stains? Do you keep rubbing it until you get the desired effect?
@Big-Modeller
6 жыл бұрын
I leave it for 2 days, or dry it with a hairdryer for about 15 minutes. As for exhaust stains - that's exactly the technique - rubbing, then rubbing and a little rubbing ;)
Hey it's me again, is there anything I can use instead of the White Spirit?
@Big-Modeller
5 жыл бұрын
You can use a thinner for enamel paints.
super film mozesz zrobic teraz ju 88 a4 revell 1/72 albo gloster gladiator 1/72 airfix
@Big-Modeller
6 жыл бұрын
Taki Junkers by pasował do mojego Heinkla, więc nie wykluczam (dwa to już kolekcja ;)). Gladiator bardzo fajny, tylko wolałbym go w 1/48 (w 1/72 staram się robić tylko większe samoloty). Ogólnie podobają mi się ostatnio dwupłatowce, mam już nawet jeden kupiony, ale nie Gladiator.
Hej BIG. Mam pytanie. Czy jesteś na grupie modelarskie tofika? Jestem ciekaw.
@Big-Modeller
7 жыл бұрын
Pewnie, że jestem na grupie :)
@mateuszand3948
7 жыл бұрын
Często się udzielać na grupie? Mam parę podejrzeń kim Pan jest xD
@Big-Modeller
7 жыл бұрын
Na fejskukowej grupie mnie nie ma, bo niestety nie można się zapisać na fejsie do grupy jako fanpage :( ale subskrybuję kanały Tofika i od czasu do czasu korzystam z jego gościnności na transmisjach na żywo :)
That's a lot of patience my friend.
@Big-Modeller
6 жыл бұрын
Yeah, patience is my superpower ;).
Do you do the same for powder washes ?
@Big-Modeller
5 жыл бұрын
Can you be more specific? Do you mean pigments?
@cowinasuit5372
5 жыл бұрын
@@Big-Modeller yeah I have the Revell weathering pigments.
@Big-Modeller
5 жыл бұрын
Well, pigments are meant for matt surfaces. This plane is glossy so no pigment will stick to it. I use pigments mostly for armoured vehicles, where you can apply them at the very end of the building process on the matt surface to imitate road dust or mud.
@cowinasuit5372
5 жыл бұрын
@@Big-Modeller cool thankyou, my version of the B-17 is done with matt airbrush colour does that make a difference. Thank you for your help.
@Big-Modeller
5 жыл бұрын
You might try to make some exhaust soot imitation but honestly, I've never seen anyone doing this with pigments on planes before. One piece of advice - try it somewhere else first. Paint plastic spoon with the same colour you've used for the plane and use it for testing purposes. Otherwise, you might ruin the proper paintwork.
Hello yu alplicated gloss coat before wash ??
@Big-Modeller
7 жыл бұрын
Yes, I hope the movie was not confusing. I always apply gloss coat before decals and before weathering.
@slivovicka88
7 жыл бұрын
Big Modeller no lost metal efect ?
@Big-Modeller
7 жыл бұрын
No, everything looks nice and shiny. I would even say, this wash enhances metallic look on the model.
@slivovicka88
7 жыл бұрын
Big Modeller gloss coat its alclad ?
@Big-Modeller
7 жыл бұрын
No, I've used Humbrol Clear as a gloss coat.