I install mine. Works fine. No bubbles. Overspill from the glue can be removed before using the uv light. Fingerprint is working just as good as before. 😊 I'm a happy customer.

Yasss!!! I've just installed it and have to say that it's great!!! This was my first time in my life when I used glass with UV! No any bubbles and perfectly matched to my 7 PRO! Many thanks for this video! Oh and one more thing: when the glass is on the screen but askew, then you can move it gently to strighten before you start lighting with a UV lamp!

@tangkimtheng7024

5 жыл бұрын

Bartłomiej Andrzejewski how about it now? Is it still fine ?

@bartomiejandrzejewski7671

5 жыл бұрын

@@tangkimtheng7024 yes, but now I noticed a little bubbles at the top and bottom... Maybe I could try to use liquid to fill them up...?

@GrandTheftAuto6_2025

4 жыл бұрын

@@bartomiejandrzejewski7671 And how is it now? Also have you OnePlus slowed down a bit?

@bartomiejandrzejewski7671

4 жыл бұрын

@@GrandTheftAuto6_2025It's fine. A bubbles at the top and bottom at the edges aren't biggest than before - it's a bit visible (about 1 milimeter wide) but I don't mind ;) And I will definitely buy another this UV glass when this becomes damaged. Also I've noticed that it doesn't draw so much which is a big plus for me! Oh and by the way the smartphone works awesome - as fast as when I booted it first time! :)

@moustafaelaraby5892

4 жыл бұрын

What about it now 😅

I remember having the OnePlus 7 pro. I miss that phone so much with its truly full display.

@Oneplus-shopNl

3 ай бұрын

We totally agree, it was one of our favorites too ☺

Think there's some bubbles below the glass in top right and down right corners

@Oneplus-shopNl

5 жыл бұрын

You're right, doing it by yourself is one thing, doing behind a camera is another. We where a little to fast with the UV light. When installing make sure you give the adhesive time to flow in all spaces.

@sush4nt88

5 жыл бұрын

@@Oneplus-shopNl not a good excuse😶

@katsudom

5 жыл бұрын

@@sush4nt88 yeah if you want to advertise something, then you gotta do it right...

@Oneplus-shopNl

5 жыл бұрын

@@sush4nt88 we don't make excuses we just want to explain what not to do and to do so you don't f*ck it up.

@Oneplus-shopNl

5 жыл бұрын

@@katsudom we have put this in the suggestion box here...not that we have.

I use it for my oneplus 8 pro. It is perfect!! There are no bubbles its like the white stone dome glass but its more cheaper. Its secret: you have to use better uv lamp (I use my girlfriend's nail lamp) and you have to cure it during 20 sec and after 2x 1 minutes!! If you use the original uv like here, I think it wont be good.

I've done this Mocolo installation on my OP7Pro. Totaly worth the £16 i paid for it. Just be carefull not getting glue in the speakergrill (can be a bit tricky to get the tape to stick on such smal area) or on the sides.

@Oneplus-shopNl

5 жыл бұрын

Yeah its one of the most important steps, you could fix this but you have to open up your OnePlus and is not recommended. When fitted properly its the best you can get for this money.

Thanks for the tutorial, I've done mine using this tutorial video, and its all good! perfect and no bubbles!

I think it's worth mentioning to wipe out the excess glue that spills on the edges of the screen before curing it because one you cure it wiping it once it's solid leaves really ugly ripped marks in the edges of the protector

@domonkosmaller9216

3 жыл бұрын

This happened to me aswell as i didn't wipe the excess glue before curing with UV and it looks a bit messy at the edges. Also solid glue at edges makes it more vulnerable as it can go off more easily.

Sir can you help me because i just purchased one and i have a lot of bubbles???

I have had this on my 7 pro for a couple weeks now. Works flawlessly, was easy to install. So far im happy with it, my only concern is how to get it off if needed. I have had zero case issues neither so far.

@Oneplus-shopNl

5 жыл бұрын

Don't worry about getting it off we tested this. You'll be left with a spotless display!

@ronpardilla3297

4 жыл бұрын

@@Oneplus-shopNl What happens after the tempered glass breaks after the phone drops. Would it be difficult to remove and replace?

@K3vin365

4 жыл бұрын

Michael Nielsen Is it still good?

before installing take time to cover all holes,use the sticker provided or even use tapes to secure all sensitive areas...they did not include it in the instruction and video tutorial so i did it on my own. and it came out perfect. don't rush the process clean well. i guess they should provide more detailed video for new costumers specially in covering all sensitive areas for the glue not to get in.

@GamerX54

3 жыл бұрын

Can this be removed from screen after it hardens/dries? Does it damage the screen?

@RickGoemans

3 жыл бұрын

This is so true, my volume down button is fucked up now...

The question can this even be removed if broken or scratched?? My understanding is UV adhesive becomes solid when it dries (but this adhesive takes a second under UV light to dry not 4 minutes )

@mohammedbettar1989

5 жыл бұрын

They can be removed I used 2 white stone dome glass screen protectors with UV adhesive and removed the first one which got a lot of scratches just by peeling it very slowly and installed the second one after whipping the screen real good.

@vectraB97

4 жыл бұрын

This glue is junk. It's barely on. This glue also dissolve in water. But you can't wash it off and try again. Glass is so fragile that it will crack before you have everything removed.

All the glues ended up on my clothes and on my desk because of the camera pop up on my 8 pro is too high. I put the glass on the phone with small amounth of glue that I rescued, but with full of bubbles. :( this method is risky with many of problems. Tomorrow I will buy another type of glass. I`m little bit confused.

So I've just recieved mine and ofc i opened it immediatly. Installation was going well, altho i've been sweating after reading how often some of the adhesive gets into the upper speakers. Everything was going great, altho the sticker on the glass didnt pull off the plasticfoil and one of the lamps of the uv lamp did not work. I had to lift the glass a few times to get rid of bubbles and as long as i lifted it straight up i could just place it again after removing the bubbles. No adhesive even touched the speaker and im not having any air bubbles beneath the glass. The adhesive leaked on the left side of the phone and some is sticking out below the glass, its removable but hard to do so. Worth the money i'd say and easy to install, even for the first time.

Make sure you put stickers on the speaker or else it'll be completely filled up and blocked with glue. And the buttons and holes etc If you get a bubble before you cure the glue you can actually egt rid of it I got rid of the most catastrophic looking cluster of bubbles I had. I couldn't believe they were gone. All I did is I was pushed them out just like you would om a normal sticker screen protector. The traditional way. Pressing on the screen and moving behind the bubble till it leaves. I got glue all over the place. Everywherrrrrrrre. It worked great I spent toooooo much time making sure there weren't any dust or dubree on the screen when I put it

Just a heads up for anyone doing this, make sure you level out your phone because of the new camera bumps. I did this on my OnePlus 12 and forgot about the big camera bump unleveling the glue but I managed to save it by plugging in my charger to the phone and using a small screwdriver to lift up from the port.

I can't recommend this product application is a fairly complex chance for bubbles is higher than expected removing them is nearly impossible ended up throwing it away and washing my phone under the sink because the earpiece was full of liquid after trying to remove the bubbles under screen protector not on edges

Gaat die er zonder problemen terug af? Ik heb hem er vandaag op gehangen maar de lijmresten worden zo hard als steen, ik maak me zorgen voor hem er ooit terug af te halen. Iemand ervaring mee? Alvast bedankt

Everybody keeps saying glue. Its not glue its adhesive and even if it hardenes you can easily remove it again after it breaks or whatever just using a hair dryer

There's way to much of this glue! I had to abort the installation to save speaker's grill despite the fact that I had put a sticker on it. The glue caused it to peel off. Luckily seems like no harm was done. However, that glass is now in thrash bin and I have no plans to go for another one.

@mathcraft7985

4 жыл бұрын

Rhinoshield is your friend 😉

@curly_luke

4 жыл бұрын

I had to little and threw it right where it belongs, to trash.

@0v3rlord

3 жыл бұрын

same problem i still have a bit of this glue after trying to clean the speaker grill. this type of screen protection is garbage

I tried that and it was a mess, it didn't turned out well. I used a nail polish remover to remove the liquid adhesive, man! I wasted my money on that product, so I just bought a full clear tempered glass case... He did it well on that video cause he's been doing it for so many times

If you don't have experience DON'T TRY TO INSTALL IT ALONE. There is TOO MUCH LIQUID in the bottle, it spills all over the phone edges. The MOST CRUCIAL PART is to wipe the liquid spilling all around your phone before uv lamp! I have ended up with the already hardened drops of liquid sticking out of the glass. Please imagine what happened when I tried to break them out.. I have A LOT OF AIR NEAR SCREEN EDGES AND GLUISH SHAPES OF HARD LIQUID AROUND SOME EDGES!! It was hard to imagine for me that someone sells something with liquid in an installation procedure and I was right. DONT TRY IT AT HOME. DONT BUY IT

@vegajoestar93

5 жыл бұрын

It gets even worse after few days. Some parts of the glue on the edges that seemed to be perfect has let the air below the glass ... That's not a nice way to protect your phone :(

@rebeccahyldgaard

5 жыл бұрын

I just did this as well, that was not mentioned in the clip. I know it can be obvious, but I had the thought that it might first hardened if it was in contact with the tempered glass, but no, so I have small air pockets on the sides, and a big one at the top, where I put the tape. Though it works perfectly with the phone, so if this was in the instructions, I would still buy. I have bought two, one for me and one for my boyfriend, so hopefully I will do better next time.

What loca is the uv liquid? The 1000 or 2500?

For some reason, the sticker removal part was left out, and this caused me a lot of trouble. While pulling the sticker, the glue from underneath it went into my speaker and when I tried to remove it the edge of the glass caught a major air bubble. Also, once you're done with the UV light, it's too late to remove the glue because it's pretty much solid by that point (and it's hard to wipe it before because the device needs to lay flat on the surface and otherwise keeps spilling glue). So I ended up with a bubble and some excess hard glue over the sides of the glass. Possibly there's too much glue in the tube so my tip is don't use all of it at once or it's going to end up dripping down the sides.

@LM-gt5dy

4 жыл бұрын

So when and how to remove the sticker that cover our mic and speaker?

@arnodji4928

2 жыл бұрын

I have the protector laying here buy I am Confused about this part. What should I do with the sticker?

Unfortunately did not work for me.. the bubbles came up as soon as the glass touched the blob.. happy to see others got it right..

This one or nilkin dx which one is better?

Great video. The music is fabulous. Would you kindly share name of the track ? Thanks a ton !

I don't recommended this type of glass protection. It just messed up my iWatch 5 44 inch. Now I have glue on the sides and it's not coming off because the UV light made it tougher.

@piyush7896

4 жыл бұрын

just wipe it with alcohol wipes

Thanks mate... Your video helped me a lot! Ignore the haters....

is that liquid safe for the phone\?i have xiaomi mi note 10 its not water ressistant

That is not gonna line up right. There is also gonna be webbing under the screen protector after awhile.

Is it (uv liquid) safe for the screen?

Mny shopkeeper told me UV glued base screen protector is not good for ur screen,if shattered then in removing case,screen may be damaged because it's a hard glue. I have talked to OnePlus they dint recommend any of this,they said we can't recommend u.

@diljith.cjithu8703

4 жыл бұрын

Yes .. it's true... Braking this is actually as much serious as braking your screen, that's why most famous screen protector manufacturers don't make one for curved displays

I tried one. It was terrible. Glue was weak.. could not put my case on without screen protector coming off. When it's off it will never look usable if you try to stick it on again. The old fashion glue you can also wash and stick it on again. Glass quality was fragile. It cracked instantly.

This is a gamble. Followed the video in detail. Drop liquid went on the phone without a problem. Placed the glass and immediately a big bubble in the center! Not recoverable. Had to remove the glass and clean the phone. Worthless!

Ummmm....You had bubbles left on the top right and bottom right, not the best application demo tbh.

How hard is it to replace, should you need to apply another? Resin is usually hard stuff. Also toxic in it's liquid form

@Oneplus-shopNl

5 жыл бұрын

The UV adhesive gets rubbery like. It is not hard to get it off but stays on very well. It doest effect the screen whatsoever. When cracked we recommend to change it for a new one. We have ours on since the making of this video and its still going strong without any flaws.

Does the fingerprint work on it?

Вообщем, нужно быть осторожным. Заклеить все отверстия и делать всё осторожно. У меня ктстати клей не протек за пределы стекла нигде. Ну и поверхность должна быть максимально ровная иначе капля клея стечем в сторону.

Are these case compatible?

Which is better this one or Whitestone brand And u better upload video for how 2 take it off this will help a lot

@T.B078

4 жыл бұрын

Whitestone dome is way better

You really need to be extra careful to apply this tempered glass..one mistake ruin everything..

Awesome! Works perfectly with my phone. Thanks for the tutorial 🙏

what happened if it is spilled into the earpiece? how can I clean it?

Inaccurate tutorial can ruin such pricey phones : 1. You didn't mention not to put all the quantity of glue as more glue can come off all sides 2. You didn't put all reinstall stickers to protect around the phone to protect the buttons Edit that tutorial or delete it for God sake

@0s0sXD

4 жыл бұрын

مشكور اخوي

@0s0sXD

4 жыл бұрын

Alright bro I searched for better guides and I didn't find any so I'll j just ask you. What happens if glue comes off the sides? The reinstall buttons go on the bottom and the sides where the buttons are? Is this sticker good for using the finger print button?

@LordMada

4 жыл бұрын

@@0s0sXD الغرا بينشف على الزراير من داخل يخلي الزراير قاسية و يخربها مع الوقت

@LordMada

4 жыл бұрын

@@0s0sXD متحطش كل كمية الغرا في الأنبوبة حط ٧٥٪ بس كافي

@0s0sXD

4 жыл бұрын

@@LordMada جزاك الله خير اخوي. مشكور كثير

I thought this would be hard but turned out its actually simple to install. I used the same tutorial for a Samsung S20 Ultra. Be really carefully with the sticker, there is way too much glue and it's very posible that might get into the speaker. If it does its actually really easy to remove it with some alcohol or hand sanitizer as long as your phone is waterproof.

Over The Top.

does this glass have an oleophobic coating and your fingers glide well on the screen?

@bartomiejandrzejewski7671

5 жыл бұрын

Yes, it has. And fingers glide very well IMO 😉

I have some small scratches on my phone screen. The glue will cover them ? I'm wondering or can get some bubbles because of them

@umbertoc3553

3 жыл бұрын

Yes the resin will cover the scratches. No no bubbles. But its kind of hard to install them

Mayby this light to spoil the screen my smartfon?

Can we reinstalled the same glass without using glue ?

@Giroutte

4 жыл бұрын

No

Is the fingerprint still work ?

Nilkin Oneplus 7 Pro Tempered Glass Screen Protector is good?

@Oneplus-shopNl

5 жыл бұрын

We'll make a video on this very shortly. We tested this full glue version DS+ and this is the only one we wanted to sell.

is this compatible wid 7t pro?

ഇത് ഏത് കടയിൽ കിട്ടും എന്താ അതിൻറെ വില പറഞ്ഞു തരുമോ വേഗം കമൻറ്

I need uv tempered glass for my OnePlus 7 device.plz send me description link

Those little bubbles bothers me..😅

@Oneplus-shopNl

5 жыл бұрын

It's nature at its finest.

AVOID at all costs if you're not an expert!! I ordered 2 of them just in case. Both had countless bubbles even after waiting and repeated tries. Additionally the sticker came of and now my speaker grills are useless. So basically whenever someone calls me I can't understand a word they're saying...

@JohnB-fy3nb

5 жыл бұрын

Aren't you supposed to cover the speaker grills though?

@cucco1

5 жыл бұрын

@@JohnB-fy3nb dude did you even read my comment? I covered the speaker grills but the sticker came off by itself. I checked thoroughly for about 5 minutes before applying the fluid.

@JohnB-fy3nb

5 жыл бұрын

@@cucco1 oh yeah sorry dude. Well I think you have just made up my mind, I don't want to take that kind of risk with such an expensive phone. I'm going the traditional way and getting a non glass protector. Thanks man. Sorry to hear you got yours damaged.

@cucco1

5 жыл бұрын

@@JohnB-fy3nb thanks mate! Yeah I get pissed Everytime I think about this incident. I'm sure plenty people didn't encounter this problem, but good luck trying to get it out of those tiny speaker grills. Not even with Isopropanyl 😒 good decision to stay with traditional tempered glass. I know it's hard to find a good one while OnePlus doesn't even offer one of their own this time. So disappointed. I'm thinking if I should send it back because the microphone isn't really working either 😅

@kleonas

5 жыл бұрын

@@cucco1 I had the same problem with liquid going inside the speaker grills, I used acetone to soften it and remove it. Still was annoying not sure if i am going to use again an UV liquid screen protector.

Hi! After a week of using Mocolo UV glass I noticed 2 cracks on the glass starting from the power button. Just to make it clear - I have installed the glass very carefully and the phone hasn't been dropped. Has anyone experienced similar situation?? Mocolo wtf?!

Sir price ka smjh nai aa raha hai kitna hai

Where are you now

What is the cost

First you gonna wanna turn off the device Second apply the protective stickers Third start wiping the phone clean with wet fiber Forth with dry fiber Fifth place phone on flat surface Sixth apply fluid Seven apply protector Eight hold screen firmly in place and wipe excess residue from edges Nine apply uv Don't do it like this duckhead

may i know your hand watch name brand and price ?

@yungtaoshiwan4144

4 жыл бұрын

No

@yajatsoni07

4 жыл бұрын

It's Samsung Galaxy s3 frontier probably !! Of around 25k-30k

Just go with Whitestone dome. However the one plus 7 pro is only 450$ now so I chose not to even protect it with a screen protector.... I love this damn phone so much tho. It's totally a flagship

I see you have the galaxy S3 frontier.... does it work well with the oneplus 7 pro???

@dieterpieter

4 жыл бұрын

?

How do you remove the screen protector if is broken or have to many scratches ? 😳😳😳😳😳🧐🧐 🧐🧐🧐🧐🤨🤨🤨🧐🧐🧐🧐

@InderPahwa

4 жыл бұрын

it just comes off easily. Lift the protector from one corner and peel it off. No residuals. If there are any residuals wipe it with alcohol prep or rubbing alcohol. I had this protector installed on my OP& pro for 7-8 months and it's still going strong. A little common sense and patience goes a long way.

Is this case friendly?

@samirez96

5 жыл бұрын

Not the original one! The alert slider and the power button got abit difficult to use!

@mujtabahassan91

5 жыл бұрын

@@samirez96 but what hs alertslider and power button to do with screen protector I was just wondering this screen protector is Case friendly I mean I dose not come off?

@tomuniekk

5 жыл бұрын

Not the original one for sure. I think the rubber case just lifts the glass a bit and that leads to creating bubbles or as in my case, it start to crack.

Can you just expose it to strong, noon sunlight? I live in the tropics

There is no delivery service to malaysia. Need the item ASAP

@Oneplus-shopNl

5 жыл бұрын

No we mainly focus on Europe because we want to be able to deliver service when needed. Maybe in the near future!

@vegeeater

4 жыл бұрын

Lol just buy on lazada

After applying does it support the in-display fingerprint scanner?

@vignesh.r5609

5 жыл бұрын

Wrking fine

@Oneplus-shopNl

5 жыл бұрын

Yes it does work perfectly as quick as before :)

How to remove this? If ones it is installed ? As after some tym it needs to b change...

@LaserMasterLevi

5 жыл бұрын

You can peel it off if you get your fingernails under it. The rest of the glue can then be used to removed using rubbing alcohol

@Oneplus-shopNl

5 жыл бұрын

It gets off very nice, but only if you want this to happen. You''ll be left with a spotless display.

LOL it seems it have bubbles on glass

Great, now show us how to remove it.

Realmi x glass milega aisa

Put on 20 ultra follow this tip but failed.. glue all over phone and screen.. wasted money

Can someone tell me, if the fingerprint sensor works or not with this glass?

@karansethi1172

3 жыл бұрын

It will

Btw nice guide👍

Does one plus 7 pro need a Tempered glass

@henryrobison5507

4 жыл бұрын

I'd say no. It's only 450 brand new now. So if it does break. Not the end of the world. Buy a new one.

There are airbubbles on top at 6:27 trying really hard to not show it on video

Ya im returning mine ! Im not crazy

Bąbelki zostały na krawędziach , proszę się nauczyć naklejać szkła uv :)

1 bubble....and i did exactly as shown.... any way to remove this it's really ugly

@efrengonzalez5534

4 жыл бұрын

There's videos on how to

How do you get rid of the bubbles if there is any?

@somebodyelse522

5 жыл бұрын

you dont. the adhesive dries and solidifies and youd just have basically a space in which no adhesive exists

@Oneplus-shopNl

5 жыл бұрын

When applying make sure there are no bubbles in the adhesive blob. When there are just puncture them with the alcohol pad.

@fitness_squad4944

5 жыл бұрын

@@Oneplus-shopNl after installation air bubbles spread out all of the display

Nhai uppar sticker kisliye chipkaya??? Vo stickers isliye tha kahi koi dust particles reh jaye usko sticker se hata dena..... Tune phone ke upper chipka diya genius 😂😂😂😂😂😂😂😂😂

I accidently made it worse. There is uv liquid on the top fo the screen and air bubbles inside

4:39 Suspicious cut. This thing looks like it's too close to the edges, if you put a case it's probably gonna lift that right off.

@Oneplus-shopNl

5 жыл бұрын

We didn't want to show you a minute of adhesive flowing. This screen protector fits with all cases we sell, from minimum border till Otterbox or Tudia.

@silentsantuary6304

5 жыл бұрын

Billy Reynolds 😘

He's instal y'all not installing

How about the price? Is it worth it?

@Oneplus-shopNl

5 жыл бұрын

You can find the price on our website : tinyurl.com/y64pvx52 We think it's worth it but we are far from objective. Please check the reviews from our customers, they will tell you their opinion :)

i burned the uv liquid ON TOP OF THE SCREEN. THIS SUCKS!

It will become useless after 2-3 weeks i hv used this

@jaikapur

4 жыл бұрын

How? Can you please elaborate?

@vibhortyagi28

3 жыл бұрын

Exactly

What is the difference between UV glass and tempered glass ?

@louisdegroelard2028

2 жыл бұрын

This is a tempered glass screen protector that gets glued on the phone via adhesive that functions after getting UV treated

Liquid can go to the inside..

@kay__72

5 жыл бұрын

Where? It's a screen

Telefonu istiyorum ama Türkiye'de yok olanlarda çok pahalı bana yardımcı olurmusunuz lütfen

Anyone knows the source of the BGM?

can anyone tell what is the advantage of this UV tempered glass?

@bapboi

5 жыл бұрын

full adhesive screen protector meaning it won't have a rainbow ish effect and other things

@benedictlang7431

5 жыл бұрын

all other protectors with lots of fake reviews i saw have air under the protector. Only the sides were glued, touch gets worse and you have to press hard. I think you should go with liquid glue versions like these...UV Light makes sure the glue dries and you dont move the protector until its not ready to go.

It's a shame, never buy this

2 bubbles....

Extremely non professional way to install.

Bias dan berpelangi bikin mata pening

@johhnysupratman4333

3 жыл бұрын

Ada efek pelanginya bro? Sidik jarinya nempel" kaga?