Thank's for this manual. I have found some interest features in that!

the motor still working on 1s battery ? and are the frame fit 2s batt ?

What temperature are you using for your iron?

@nxp200

10 ай бұрын

I like running 400°C. Some might say that's a little too hot, but, works for me.

@Greg__K

9 ай бұрын

@@nxp200 Thanks for the reply! That does seem a little high, but it's working out well for you. I thought that I lifted a pad on my X12 Flight Controller, but it was actually just the ground on the battery lead wobbling around. The pad was being very stubborn and not taking the solder for some reason.

@nxp200

9 ай бұрын

@@Greg__K no problem 👍. I don't think I've ever lifted a pad. Nor burnt any components. I try not to take too long on a solder joint to prevent over heating. I'm by no means a soldering expert, but have soldered long enough to make projects reliable enough for my purposes. Happy for people to ridicule and flame my work 😂

How do you mount the battery in that large tray?

@nxp200

11 ай бұрын

I use small rubber elastic bands shown here 15:37

@doodgeslagenmug

11 ай бұрын

@@nxp200 thanks a million! That is genius! I’m making a 1s & 2s whoop with Flywoo’s 1002 15500 kv motors. Its hard to find 1s & 2s whoops nowadays.

@nxp200

11 ай бұрын

@@doodgeslagenmug I didn't show it in the video, but I also put a single twist before looping the other end of the battery. Makes an "X" shape with the band. This stops the band from slipping around etc. Yeh. Not much variety out there and I like building my own so I can choose the components, or reuse various parts from other broken quads. Good luck and have fun flying!! 👍

@doodgeslagenmug

11 ай бұрын

@@nxp200 Thanks a lot for helping! Its nice being able to put together parts to your own preferences :)