Well done man,no nonsense video,straightforward and simple.

@JoshSims

2 жыл бұрын

Thanks! Long intros and life stories bother me when I'm trying to figure something out.

A good how to video, thanks! I can't say I agree with filling by pouring the diesel into the centre because that defeats the purpose of the filter. I'd take note of the diesel level when I take the old filter out and fill the bowl to that level before putting the new filter in. A thin pipe can be used to add diesel from the side if top up is needed.

That's the idea make sure it's filled up to brim as when you start it there's no reserve pump to fill it like on earlier models mk5 golf you heard it kicking in

Liqu moly. Diesel purge. Is what you refill the bowl with.

You should not pour diesel back to the “hole” of a filter. From the hole is fuel pumped to engine. Pour fuel on the black plastic to filter the fuel first.

@JoshSims

2 жыл бұрын

I used clean diesel to top off filter housing. And you won't notice a difference between filling the hole vs slots.

@vljanda

2 жыл бұрын

@@JoshSims ok. Personally I prefer filtered fuel if I can choose even if it is clean as a whistle 😊

@vlogurawa5968

6 ай бұрын

Yep, outside filter. Better process

Pourquoi vous meter pas le filtre directement

Don't you need to run VCDS and pump the fuel beforehand?

@JoshSims

2 жыл бұрын

That is the point of this video, if you fill the housing completely with fuel, you don't need to use VCDS or OBD11.

@drwisdom1

11 ай бұрын

But I have a VCDS and don't want to drive to the gas station just to buy a quart of diesel.

@milenkomijic8805

9 күн бұрын

Hoe to run on obd 11 which code??

CLHA engine?

@JoshSims

Жыл бұрын

CRUA