Very Awesome!. It's so nice to have a new person to the hobby. It's a shame that you had issues with your car. Receivers can be finicky at times but I learned something new today. If a servo is shorted out it causes the ESC to stop functioning all together. I think your doing fine just starting out. Being that your an Architect you are a critical thinker and will do well. I hate to admit it but I'm a retired electrician and struggle with the electronics on RC's. Best wishes to you as a new member of the RC community. 🦾😀 New Sub for you my friend. 👍 I can tell your channel will do well.

@arq.andresfelipemoralesvar9593

8 ай бұрын

@RcRoads Huge thanks for your sub and your like! I still have to post the fixing of this car, if you ever thought about getting one of this MJX the customer service is good, they sent me a new Servo and they even gifted me a 2s 3000mah LiPo battery. I did some modifications to this rc and that’s also another video I’ve planned. Also I’ll do a review on my granite after 50 packs, currently on 32. Can’t stop running my granite cuz is so so fun! lol thanks for your wishes and have a good one!

Thank you for your video. Had the same problem with my 16209 and my 14301

Why does mine turn off as soon as they turn it on? Can someone help?

If anyone ever has the problem where the throttle only works in reverse, try swapping the blue and yellow cables plugged into the ESC.

I just got a hyper rc car H16BM about a week ago and the 11.1 voltage battery upgrade and I’m already getting bad sounds while steering and driving

@arq.andresfelipemoralesvar9593

7 ай бұрын

Hi thanks a lot for your comment! The steering sounds may be caused because the endpoints in the steering servo are tending to go beyond their possible extension, make sure you have your endpoints set correctly. Let me know if you need anything else:)

tengo un problema similar, por error desconecte los canales, todos del receptor, y el coche dejo de funcionar, cuando enciendo el control remoto se conecta por unos segundos, cuando avanzo el coche , se apaga el motor, o si no se apaga, deja de moverse el coche y se queda quieto, solo me responde la direccion en esos momentos, que puedo hacer?, o donde me comunico con servicio técnico, por favor ayudame, gracias

Dude, my hyper go truck won't drive but has steering,fan works, bought new batteries.all for not 😕. Vegas Paul here.any ideas?

@arq.andresfelipemoralesvar9593

5 ай бұрын

When you push throttle the motor rotates? If it does sounds like it rotates It may be the pinion gear connecting the spur gear may be loose, make sure to tighten it back (using a little bit of locktite in the hex screw may help). Other thing you can do is check the integrity of the cable that connects the motor to the ESC and it’s connected and the cable that connects the motor to the receiver and the also ESC to receiver, all of the cables must be intact and make sure all the plugs are correctly connected on polarity (+=+ and -=-) hope you can solve your issue:)

Yo mine and your problem both are same thank you did you receive the servo and did it work

@arq.andresfelipemoralesvar9593

7 ай бұрын

Hey my friend! Yes I received the stock servo and it solved the problem. There are also some 1/16th scale servos on Amazon that fit on this model.

Did they send the servo for free

@arq.andresfelipemoralesvar9593

7 ай бұрын

They did, I just had to send few pics describing the issue, customer service is good.