Cheers for that mate I dropped the oil on mine myself and it wouldn't go away. It was burning my fu@king head out thanks for sharing that with me my little Irish mate 👍

@kennedysgarage3281

4 ай бұрын

You are most welcome Justin 🙏🙏

Spent hour last week doing that reset on Autel. Some functions they nearly hide on ya. Think it would be in hot functions. Good vidoe Peter 👍

@kennedysgarage3281

10 ай бұрын

I had the same issue, 2 guys working for me got bet and couldn’t do it. So only at that point did I jump in 🤷🏼‍♂️😂😂😂

These also need a small injector quantity relearn every 20k. There is a tsb for that.

@kennedysgarage3281

10 ай бұрын

Very handy to know, cheers mate 👍👍

great advice, used my 906 to clear the same fault P252F on an outlander today, job done!

@kennedysgarage3281

4 ай бұрын

Well done mate, it can be a little hard to find this reset so the video is handy 🙏🙏

Thanks mate from Australia I say thank you. Very helpful video.

@kennedysgarage3281

3 ай бұрын

You are most welcome and it is fantastic to have you watching all the way from Australia, thank you very much too 🙏🙏

Great help followed your instructions today and worked perfectly .. and as you said Banda - bing - Banda boo 😁👌💪

@kennedysgarage3281

7 ай бұрын

Wheyhey, good man Michael 💪💪💪 Just goes to show spreading our knowledge just makes these challenges a little easier. Cheers mate 👍👍

Make sure you guy’s do a small quantity relearn on these oil full codes it is the cause of the problem TSB

@kennedysgarage3281

3 ай бұрын

Oooh, very good to know. Cheers Scott 🙏🙏

New sparks seem to have fixed the Mazda 3s hiccuping engine. Thanks Peter.❤❤ MD spark plugs 30 a piece. PHEWW!!

@kennedysgarage3281

10 ай бұрын

Oooh, expensive but a cheap fix overall. That’s probably why they hadn’t been charged previously. Well done on the fix though 💪💪💪

On the 2015 ish outlanders this is also a issue, the autel 909 struggles as their is 3 resets for distance, mileage and driver style on the service reset but the autel will only reset 2 out of the 3, if you use autocom it resets all 3 and gets the DPF light off. 👍

@kennedysgarage3281

10 ай бұрын

Oooh, good man. All the Mitsubishi’s can be a bit awkward but that’s excellent information to have 🙏🙏 Thanks mark

Thanks for that never noticed the drop down menu in that function on the Autel had same problem with a Mitsubishi asx 🎉🎉

@kennedysgarage3281

10 ай бұрын

It can be quite to see, I nearly missed it too 😉👍

Would you recommend changing the oil filter also or just dump the contaminated oil and put new into it?

Noone can explain the reason for the fault or a permanent fix though. I've been into three various mechanics resetting the code, performing a forced regen and changing the oil at a cost of $160 to $200 a turn and on ewch occasion about 5000kms apart. Why is it doing it, and how do we stop it (outside a permanent dpf delete)?

Very useful information Peter thank you 🙏

@kennedysgarage3281

10 ай бұрын

My lads got bet on it Kevin & I spent around 30 minutes messing with the scantool before figuring it out. So hopefully it will help someone 🤞🤞

On the earlier Mitsubishi 4N14 engines you have to go in to special functions and reset the oil level to zero. Looks like they've simplified it a bit, but still a pain in the butt.

@kennedysgarage3281

10 ай бұрын

Mitsubishi in general can be a pain in the bottom. Lots of scantools struggle on them 🤷🏼‍♂️🤷🏼‍♂️

@duncanevenson4621

9 ай бұрын

The live data list I find is amazing on the Mitsubishi software. It gives you data in the last five Regen attempts, eg speed of vehicle, length of Regen, what triggered the Regen. So helpful to diagnosis why the fault occurred.

@kennedysgarage3281

9 ай бұрын

@@duncanevenson4621 that is very handy information to have when diagnosing faults 💪💪

Our experience with oil level too high is due to excess diesel injected during active regeneration. The excess unburnt diesel finds its way into the oil sump hence contaminating and raising the oil level. The best thing to do is replace the oil and perform an oil service reset. Unless you do this, the error code will pop up again.

@kennedysgarage3281

Ай бұрын

You are exactly correct on the reasoning for oil dilution, cause and effect. This isn’t understood by a lot of mechanics 🤷🏼‍♂️🤷🏼‍♂️

@chriscullen8170

Ай бұрын

Would you recommend changing the oil filter also or just dump the contaminated oil and put new into it?

@DPF254K

Ай бұрын

@@chriscullen8170 You should change the oil filter also since some of the contaminated oil remains trapped in it.

למה Thank you very much it helped me a lot

@kennedysgarage3281

2 ай бұрын

Well done 💪💪

Thank you Peter!

@kennedysgarage3281

5 ай бұрын

😉🙏🙏🙏

You are God send, you do know how much money you saved me ❤❤

@kennedysgarage3281

5 ай бұрын

That’s what my channel is all about 😉🙏🙏

I write in cyprus thanj you for your help

@kennedysgarage3281

6 ай бұрын

I’m glad it helped & thank you for watching 🙏🙏

Um abraço de Portugal

Hi ive been trying to do an 18 plate l200 today dpf light flashing, also with the same fault code and wouldn't erase, dipped oil and it was reading high so sucked some out and it was between the 2 marks on dipstick so thought all good, tried a forced Regen but still would not shift code, i did get into that drop-down menu you were on but not sure if i did the oil exchange service but i did do the dpf exchange service with no luck, i have the maxisys ms 906, I'll contact the owner and fingers crossed it'll work

@kennedysgarage3281

8 ай бұрын

I’m not aware if the MS906 has the feature or function. Fingers crossed it has all worked out for you 🤞🤞🤞

Excelente 👏

you explain well, thanks

@kennedysgarage3281

10 ай бұрын

Thank you very much Tony 🙏🙏

Hey pal what model Autel scanner did you use for this job,? Thanks

@ConcernedCitizen742

2 ай бұрын

Never mind, you said it at end of video hahaha

@kennedysgarage3281

2 ай бұрын

The Autel MS909, I find it a really good scantool. But funny enough my work colleague has a TopDon scantool and I’m really bad on it & he is really bad on my Autel 😂😂😂😂 You just get familiar with what you use everyday 😊

Hi mate i don’t suppose you know if the Autel MK808S will have the initialization function?

@kennedysgarage3281

14 күн бұрын

@@pangotāne unfortunately I do not know 😔

@pangotāne

14 күн бұрын

@@kennedysgarage3281 I came across a Pajero with this issue today, so I tried to start a forced regen with my mk808s which I have only just purchased but it wasn’t working. I then read on why I wouldn’t and it said it wouldn’t start with codes being present so I scanned it which I know I should have done in the first place and it come up with the exact same code so I checked the oil and it was well over, I drained out over 4l ! I thought maybe her husband over filled it or something which is so common for people to do, but upon reading this comment section I have thankfully learnt that it is most probably excess fuel and I should probably change this ladies oil asap! 😅 hoping the mk808s has the function

@kennedysgarage3281

14 күн бұрын

@@pangotāne fingers crossed it does, most Autel scantools are similar in layout so this video should help 🤞🤞

After you reset the oil level and delete the code will this enable the car to do a regen whilst driving?

@kennedysgarage3281

4 ай бұрын

No unfortunately not, you have to reset the dpd data as in this video 😞😞

Excellent info..

@kennedysgarage3281

10 ай бұрын

I had a bit of searching before I figured it out 😬😬👍

Dziękuję

@kennedysgarage3281

10 ай бұрын

🙏🙏

But did you fix the issue Kennedy?

@kennedysgarage3281

5 ай бұрын

Yes, an oil change and this simple reset fixed the problem 👍👍

Hi , what model Autel are you using ?

@kennedysgarage3281

9 ай бұрын

It is the Autel MS909, I actually really like it and it is my go to scantool. They are around 4k but we’ll worth it I think.

Can this be done with a standard obd2 and can scan tool?

@kennedysgarage3281

6 ай бұрын

Unfortunately I actually cannot advise on differing scantools, simply because I don’t know. I would suggest that an OBD2 scanner wouldn’t be able 😔😔

Brilliant !! That worked just as you showed us.. Top youtuber❤ Scan tool, g-scan3

@kennedysgarage3281

2 ай бұрын

Brilliant mate, well done and thank you 🙏 🙏

cars today are just a balls🥲

@kennedysgarage3281

10 ай бұрын

That was my thoughts exactly. Such a job to do a stupid oil/service reset 🤷🏼‍♂️🤷🏼‍♂️