No video
Mission Impossible - the big cylinder head challenge.
In this, episode 80, DV moves on to part 9 of the St Judes charity mission impossible 318 mopar build. Here he shows how to do just a metal removal job to increase the intake ports power potential by about 25%. You will find this to be one of the most informative intake modification videos on the internet - guaranteed!
Пікірлер: 171
Charles Servedio has been an absolute Britannica. Every now and then someone needs to step up and he did!
@servediocylinderheads
Жыл бұрын
Thanks!
@robertwest3093
Жыл бұрын
You're right there! Charlie posted video updates with just about every area he cut on.
@blairlindsay5791
Жыл бұрын
🇬🇧
Everyone needs to give @charles Servedio cylinder head porting and flow bench KZread channel a sub if DV trusts him with his heads you know he's not just good but exceptional
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
@christophergriffin8344
Жыл бұрын
C'mon you should be able to tell that from his videos alone🤘
I did some of my postdoctoral training and research at St. Jude. The experience changed my life and it’s my charity together with MD Anderson. Good on ya’ll
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Your attention to detail is second to none. The information you share is priceless. I hope people appreciate it. Thank you David
@jeppakongur
Жыл бұрын
This is a Nigerian scam
I've got to hand it to you all, it has been really fun and informative to follow this build. Just great grassroots tech and ingenuity that anyone can follow. Charles Servidio sure is a master with those porting tools.
Good to see you back David.
172 cfm to 225 cfm that is a huge improvement considering the valve and port size the exhaust manifolds I think will be the worst part of it all then the carburetor learning a lot from these videos.
@Patrick-xd8jv
Жыл бұрын
The carb and stock exhaust manifolds
Always loved listening,,and taking to, knowledgeable folks expertise on engine machineing and building,,of Racing automobile's,,helped me immensely,on working on,and building my cars,and others 🏁
Thank you David, always a pleasure to sit in on your videos. Terry from Australia.
@stuartclements9290
Жыл бұрын
Yes he is brilliant.
Those heads are going to flow , the 318 will breath. Thank you DV.
@tonyschiffiler4816
Жыл бұрын
Breathe
Great Series DV!...Great info too!...Much kudos to you and Charlie as well....
Watching these videos almost makes me want to take my assembled but not started engine apart to check my porting work to see how closely it matches yours. I think I did a pretty good job from reading your books but I'm starting to second guess myself.
@jeppakongur
Жыл бұрын
This is a Nigerian scam
@kennethstaszak9990
Жыл бұрын
@@jeppakongur I know. Whenever I see that in a video comment I click the three dots to the right and report it as spam.
God bless her and you all this Lent season! Have a great weekend and afternoon!
THANK-YOU , one of the most interesting series on the whole web . Luv ya work mate .Cheers
Thanks for all your hard work on this project MI. It's been very interesting so far. I'm very excited to see it all come together and smash the project goals!
@matthewsmith6486
Жыл бұрын
@@DavidVizard ????? Scammer?
DV makes it look easy! You have to try doing it to appreciate what you see here. Absolutely amazing!
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
I have milled 318 heads .090". It made them pretty close to closed chamber heads. The pistons still were about .1" below the deck though. But no problem with the heads with that milling, except that you had to take that in to account with the intake fitment and the blocks end rails. If you mill the intake faces, the valve cover rail may become really thin.
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Glad to see you back!
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Good information. Nice work David. I would say flat mill the heads .045 would be a good start. Thats where alot of people started back in the day. I have never angle milled Mopars. That may be something to ponder. Thanks for sharing. Take care, Ed.
@jeppakongur
Жыл бұрын
This Instagram is not David but a Nigerian scam !!!
Wonderful series David! Thank you all so much for the hard work on this engine! Chrysler guys around the world have been waiting a long time to see the 318 engine (that was cast aside long ago) prove it's worth! For a great cause, and with no one better to prove it than the legend himself... hallelujah! 🙏👏👏👏😊
Thanks again DV this is what ive wanted to learn since i was a young man! I really do appreciate you giving away the knowledge that for so many years was kept secret
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Excellent work David Excellent work . I have learned a lot by your books since the eighties and now God Bless You Keep it up Thank You
Another excellent video and teaching lesson. Thank you David, keep them coming!!! 👍👍👍
@jeppakongur
Жыл бұрын
This is a Nigerian scam
Excellent stuff! This was what I was waiting on. Thanks David and Andy
I have heard stories from back in the day when local stock car guys racing flathead Ford v-8 engines would heat up the cylinder heads and add brazing rod to fill in the chambers to raise the compression. Then surface them as much as possible.
What little i know about porting learned from Tim Connelly worked at dyno center at dodge he said pretend its a road you want a smooth road. And never gasket match port match gasket matching usually causes a small valley makes turbulence.
Very interesting topics. I'm always looking forward to the next info packed video.
Thanks so much for taking the time to explain how to port this head.
This is gonna be good!
@psmopar
Жыл бұрын
And it was!
@carlosfgarciasepulveda5927
Жыл бұрын
@@psmoparI never thought I would see someone with the level of knowledge and experience David has go so in depth with a “lowly” 318 cylinder head with small valves. I’m so excited for the rest of this series.
@psmopar
Жыл бұрын
@@carlosfgarciasepulveda5927 We use to use the 273 in the 280 stock E class hydro when boat racing. We had to run a stock motor but I now know there are many things we could of done " stock mods " that were not in the rule book that could of produced more hp. There are a lot of small block mopar fans that will get a big kick out of this entire series when done.
@scotteric8711
Жыл бұрын
@@psmoparThe LA318 marine was a good engine. I've seen a lot of guys repurpose them for the street.
I just watched an Eric Weingartner video review of SBC head another guy had done. Interesting to hear Eric talk about keeping the tail in the bowl because it keeps fuel in suspension and then see David talk about removing it and it not really mattering.
This may sound silly but why not start with an 85-91 318 block and heads? They have smaller swirl port chambers and roller cams. I know this is the block Junkman Tony saddled you with but you can still trade. Part of budget builds is starting with the best factory pieces to fit your needs. The price difference between a 1973 and a 1987 318 is negligible in the wild.
Love the Mission Impossible series.
Grande Mestre. Muito obrigado por dividir seu conhecimento e doar parte de seu tempo.
In the past have tried pushrod holes and inserted thinwall steel tubing sealed and pressed in and ported over to it. On one offset honed which offset pushrod slightly
Hi David , everyone involved with this has and is doing an awesome job to the motor and for saint judes .. my question is , ( remember I’m an Aussie 😅 ) with cast heads can you weld cast heads to fill the chamber up to boost compression instead of taking 100 thou off the head to increase comp .. this will also effect valve geometry ( as you would know ) plus old school mechanics do say it can heat your motor more ?? Apparent quench part of the heat distribution of the head.. cheers
Banks Power are great at presenting technical detail. DV you have the knowledge, it's hard sifting through the booms, clicks, sidebars and subscribe shaming to get to the quality information that makes your channel.
@DavidVizard
Жыл бұрын
I do what I think it takes to save kids. So far our team has raised a healthy 4 figure amount in a little over 3 months.. How much have you raised?
@mrrberger
Жыл бұрын
@@DavidVizard Really, you're flexing? Ok So I started a food charity giving up my time, roping in people and doing collection and dropoffs. I attend Church every Saturday morning to give food to about 70 needy people and on occasion support others with the extras (including during covid, the police and fireies). So there's the answer to your question however it's irrelevant really. The point of my comment was to suggest you focus on entertaining as successful YTs all know it's entertainment that gains Subs. Pops, Bangs and Subscribe shaming is you doing a disservice to you and my comments were for your benefit. Yes I purchased a couple of your books over the years and I seem to remember you were a proponent of cutting through the guff to dial in on the measurable results. YTs are focusing on the first 7,20 and 40 seconds of their Vlogs as the metrics show that's the make or break of interest, you're still running your 2 min channel reel. People will be skipping that in-perpetuity and your viewed ratio will be at the back of the pack. Quodos for your career in ICE and motorsport, grow up for viewer shaming. My reference to Banks presentation stands, just like my uplifting of you to Banks when he shamed someone with less ICE knowledge.
I'm so glad I subscribed to your channel excellent information this is a video I will keep going back to and referencing
@DavidVizard
Жыл бұрын
@tele.gram.me.@DavidVizard1 Not DV!!!
Thanks Dave.
great info.
I remember spending days on cylinder head porting to be disappointed on the dyno with at best 20 to 30 hp. Loads of time put into doing porting. Bloodviking
Kiitos!
I milled .100 off a pair of 340 j-castings. They worked fine.
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
@timsprojectcar1875
Жыл бұрын
@@jeppakongur Hi. Thanks for the heads up
Thank you
Heart goes out to Ed. Wish him all the best.
Good morning to you all and I hope that you have had a great day so far!
Hi folks, I was wondering what your opinions are of the Ford Cleveland 2V and 4V designs. There are many examples today that are still very competitive despite the design being over 50 years old now.
@slicepizza3263
Жыл бұрын
Arguably the best small block heads of the 60s and 70s but we're here talking about mission impossible 318 parts.
@moyadapne968
Жыл бұрын
I saw a machinist mill off the exhaust ports on a 4V 351 Cleveland. Then he made up a steel adaptor to allow the exhaust to exit at a better angle. Made much more hp.
@kennethstaszak9990
Жыл бұрын
2V heads had a poor open chamber and reasonable ports while the 4V heads had a good closed chamber but the ports were to big for anything but high rpm race use. The Australian heads were a combination of the 4V chambers and the 2V ports. When combined this way the results were positive.
good show
FOR THE SECOND TIME - I DO NOT KNOW WHO THIS GUY 'Tele.gram.me.@DavidVizard1' IS BUT IT IS NOT ME!!! Reply
I'm sure that there is and I will continue to do so by watching the shot.
the more these guys do the more i feel like the aftermarket just didnt care to try when it came to mopar
@carlosfgarciasepulveda5927
Жыл бұрын
The sbc and bbc got almost all of that sweet R&D from the aftermarket. Almost makes me wanna get rid of my Dart to buy a Nova. Almost!
I never ever hit the bell for any channel at all! But I hit your bell.
DV, you need to have a cheap Chinese ultrasonic thickness testing meter. It should tell you the answer. The answer may not be what you were hoping for as mine weren’t when I found that the crowns on my Porsche 914 pistons had crowns that are only 5.9 mm thick.
Nice job! You completely eliminated the pushrod pinch. I wish I had made that tool when I did mine. I was afraid to cut into the pushrod bore. Plenty of meat there though.
@hotrodray6802
Жыл бұрын
Most heads the pinch is not the restriction, as per DV.
@yallainrite3658
Жыл бұрын
@@hotrodray6802 I think in the case of the 318 it is though, hence the removal.
Muggy weld or flame spray quench pads in your chambers if you cannot machine enough to clean up . I’ve seen old photos of race guys experimenting with weld. Might work, might crack if not done to spec.
@bobgyetvai9444
Жыл бұрын
Brazing also works just dandy . Just do it right with normaling back to ambiant temp .
AWESOME as usual sir.. I would really love you to do an overview and flow correction exercise of an Oldsmobile head.. I am hoping to do a backyard build of a junkyard Old 403, and i believe the lightning exercise would really benefit that engines's block design (windowed mains).Thanks for considering🙏
@davidreed6070
Жыл бұрын
I've wondered if you can take the crank out of the old 400 oldsmobile engine and put it in the 403 block. If so it would make a large ci engine
@a4000t
Жыл бұрын
@@davidreed6070 The problem with 403's is the weak main webs,they crack even as 403 CID. We had alot of cracked blocks come thru our machine shop back in the day.
@davidreed6070
Жыл бұрын
@@a4000t a friend built an old 400 oldsmobile engine and put it in a coupe, it was a strong engine. Pretty impressive.
How are you taking off the 1/4 inch of guide? Thank you and great videos
Heads went from the earlier wedge to the open chamber for smog reasons. Now you can make them work at high rpm (above the torque peak as in drag racing) and with octane but they suck on the street. We used to weld up those chambers then developed special pistons Today you can get aftermarket heads with much better chambers or use Magnum heads I would never use an open chamber head on a street or motorhome or marine build. I hate detonation. MA Mopar kept dropping the compression which requires more throttle to make the same hp and makes more heat. The cam that came with those heads had a really late close to give a faux egr input charge exhaust dilution also makes heat. You cannot make those heads without creating quench. You cannot make those heads work with any cam without race gas unless you do not use throttle at lower rpm, YOu can fly cut to equalize the chambers then use dome pistons into the flycuts with a dish on the non quench side (to give whatever compression is desired). I would only do this on a matching number restoration ( i have done on 340 but not on 318) It's easier to get the piston pop up with a 360 crank in a 318 or 340. (or 20 years ago use a 4" stroke 10 years ago I'd start with a MAGNUM If you are running a .450 lift cam try a cut down oversize valve with a 30 degree seat Looking fwd to discussion of valve heads and smaller stems. LA has short spring height so I usually install longer valves and relocate the rocker shafts which needs to be done to get the geometry right anyway
👍💪
@DavidVizard
Жыл бұрын
@Tele.gram.me.@DavidVizard1 NOT DV!!
Hi DV .love your work and have been following you in magazines and your books for many years now. I have a set of trick flow 190 CNC ported heads for my 408 mopar . Can i just bolt them on after a good cleaning or would it be a benefit to use a cartridge roll and smooth out the CNC marks in the intake and exhaust ports?
@DavidVizard
Жыл бұрын
Use as is.
About 12 yrs ago I saw a metal spray gun that sprayed zinc metal, kinda like a hot glue gun. It was used to repair rust holes in body work. Wonder if that might work to reshape ports? 🤔
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
@MidnightOilsRestoration
Жыл бұрын
Yes I remember that advertisement too! It seemed to disappear just as fast as it came onto the scene and I believe someone bought him out of the design.
@danlabonty9720
Жыл бұрын
They have spray transfer welding. You pre heat base metal to about 500 degrees add powdered metal to spray gun and spray ypur build up. Check Adam booth machine on you tube. Most of the time it's used to build up journal diameter for bearing fitment on shafts.
Great information👍 . What is the thinnest you would make the bowl thickness?
@slicepizza3263
Жыл бұрын
Scam message ???
@jeppakongur
Жыл бұрын
This Instagram guy offering prize's is a scam artist posing to be David !!!
Yes please David I couldn't see above the hand. Thanks.
Does anybody know where I can get a calibrated Helgesen orfice plate?
Can a bowl hog be used to carefully remove most of the metal first then shape it with porting bits?
First time I’ve seen a mopar SB get opened on the bottom unless you moved the push rods.
Amazing process David 😎
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Are your utb vids available for purchase? (as my youtb prime has the valve train tips in seemingly mixed up random order).
You can't put larger valves in when the seats are almost touching now.
at 14:40, could it make more sense, if we say I'm being very cheap, to keep the stock cam if changing it would upset my ecu, and run a flow ball at the specific lift I know my cam will give me?
Hello David, I noticed that the roof of the port has been welded. Did you have that done to achieve the port shape you’re after? Or did it just happen to be there from previous work? Thank you.
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Double WHAMMY🤣 hope you watch Mortske Repair..
25:40 outer wall nearest cylinder center? inner wall nearest the cylinder (wall?) looks like that port floor could use a fill good vid
GREAT info poor audio, keep the clips rolling learning much here!
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
The head Charlie is showing is a quench head. ????
@servediocylinderheads
Жыл бұрын
Yes, 302 casting number quench head. The worst flowing!
@ David (or anyone) I have some Gen 2 Viper Heads...Who might be good to hand these to, so as to optimize them. I dont want a race head, but I do want it to be, sorta what the engineers SHOULD have designed a performance street head should be. Who would be good?
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
@Arthagnou
Жыл бұрын
@@jeppakongur i got that, thanks for the heads up!
Did you say Helgeson i bar, as in Dr. Air Helgeson the porter?
Would be a lot more easier to understand where to remove material and what shape to give it with the cutter wheel with a sharpie pen
That valve is not punched dead center.
Cadilitic converters came out in 1974
If anybody had a set of these castings junk I could mill them off the deck until they got too thin to determine what could be done. Just by looking at it I bet you could get at least .150 off it. .250 probably would be pushing things but might be possible.
PLEASE do a diesel series!
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
Six pounds, that's amazing!
@jeppakongur
Жыл бұрын
This Instagram is a scam artist posing to be David !!!
@Sludge73
Жыл бұрын
@@jeppakongur I hit report as soon as it posted.
We should give everything and anything to all children
@jeppakongur
Жыл бұрын
This Instagram is not David but a Nigerian scam !!!
23:36 Instead of JB Weld couldn't you sleeve the push rod bore ?
@jeppakongur
Жыл бұрын
This Instagram is a scam artist posing to be David !!!
@scotcoon1186
Жыл бұрын
Someone did that on an engine builder challenge for one of the mopar magazines. Rules said no epoxy. They siliconed copper tubes in.
Charlie is doing some GREAT work! (~_^)-b
Thanks,DV…..v/r wh
After all the lighting of the rods and crank the assembly has to be balanced. Where's the savings? Balancing is expensive.
@DavidVizard
Жыл бұрын
I will show how I balance rods and pistons for nothing. Way back I also made my own crank balancer! DV
@psmopar
Жыл бұрын
If you're going to build an honest race engine they all need to be balanced to be done right Dave shows you a way to do the pistons and the rods all you need to do is take in the crank and have the balancer calculate bob weight for journals.
I feel like a fool, i got fooled by the guy posing as David here on Instagram on the channel here offering prize's 🤬
On a drag racing car you will bring your rpms up. So liten8ng the assembly to rev quicker is not that important. If you hit the throttle off idle it can be an advantage. If you aren't skilled and make a mistake and gouge the crankshaft. Oh boy.
I could care less about more HP...I want dependability. I need my engine to start and run every time. This means start & run for long periods of time without trouble. Hard to find info on how to make your shtuff dependable.
Stop now and go get a318 poly.
I DO NOT KNOW WHO THIS GUY 'Tele.gram.me.@DavidVizard1' IS BUT IT IS NOT ME!!!
@briantayes2418
Жыл бұрын
There's ONLY ONE David Vizard and we are all the wiser for knowing you! Thanks David!
Lmao this thing should have been done long ago. Aubscribe make me money il donate a luttle to st judes lmao. Look people just donate. Send it direct to st. judes ten bux a month. Its easy simple and no middle man.
@scotcoon1186
Жыл бұрын
They are going to auction or raffle this engine off and donate the proceeds.
Why is he talking about crankshaft listening on a cylinder head video
Could you weld up the chamber so you can take less off
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
David, is someone posting scam messages? Win prizes?
@slicepizza3263
Жыл бұрын
David's replies are from @David Vizard Any other are probably a scam
@DavidVizard
Жыл бұрын
@Tele.gram.me.@DavidVizard1 What's this? DV
Most hands are not steady enough to do this kind of work. You'll ruin your heads.
I would spend a fair amount to DV the Uncle and whoever else to buy a well written PDF book and download able video series. I'm just saying.
@jeppakongur
Жыл бұрын
This is not David but a Nigerian scam !!!
@briantayes2418
Жыл бұрын
David's book "How to port and flow test cylinder heads" has all this info in it and great stories too. His book "how to build and modify Chevrolet SB cylinder heads is another one of his awesome books. I have almost all of his books they are great and affordable.
👆 you have won a price DV 🎁🎊🎉⚰️
Ze mot heur klit ook nog missen met dur flaporen.👩🎓