YES, these setting are tournament legal. I did a lot of checking to make sure before posting this video. Now go hit ‘em with some WAVUWAVU!

@ays0nable

5 ай бұрын

It’s not going to stop people from judging you. These are cheater boxes.

@Chris_F

5 ай бұрын

It’s 2024 we are past the days when everyone plays on stick. More options = more players

@Isozoldyk

5 ай бұрын

@@ays0nable if it wwas cheat box people would surpass pro player stop crying get good its that simple

@Miarespammer

5 ай бұрын

still we dont have any champion or any top player going very far with hitbox or crossup, cross up is there and don't know someone who is breaking the game with it, maybe rangchu and super akuma comes to my mind, but both players quality is more than the control they decide to use, is their personal talent and training that put them there.

@hiraprxc

5 ай бұрын

​@@ays0nableits not a cheatbox lmao - by your logic, pad is a cheatbox too because of how fast t is

Just remembered today about your layout and been trying it for an hour or so, kinda awkward at first but definitely the left hand feels more relaxed this way

The button movement mapping really helped me with ewgf thanks.

@Chris_F

5 ай бұрын

Great to hear!

@IceManP23

5 ай бұрын

How do you map your buttons like that?

I noticed when setting up my own layout that with the settings described at the beginning of the video, you're not actually sending both analog and dpad inputs to the game. That "Left" or "Right" in the Pin Mapping menu is just the generic version, which gets sent as whatever you set the D-Pad Mode to in the Settings page. So you just have two buttons both mapped to the left analog stick directions. If you want your controller to actually do both, there's more you need to do. 1. In the Settings page, set the D-Pad Mode to either D-Pad or Left Analog Stick. Doesn't matter which you choose, just remember this for later. 2. In the Pin Mapping page, instead of setting your extra buttons to Left and Right, set them to *DDI Left* and *DDI Right* 3. Finally, in the Add-Ons Configuration page, scroll down and enable *Dual Directional Input*. Set the Dual D-Pad Mode drop down to the opposite of what you set in the settings page, and set the Combination Mode to None. In the in-game Button Mapping page, if you click the "Check Button Input" option you can test your inputs and see if you got it set up properly. One thing to keep in mind with this, however, is that the SOCD doesn't apply between both input types. e.g. If you hold Left+Right on your main directional inputs, then press Right on this extra DDI button, you'll get Right instead of neutral. I haven't had any issues due to this yet, though.

@MegaWilliamDeth

5 ай бұрын

I noticed this myself, and did the same as you explained when i didn't get the same inputs as shown in the video by follwing it. But by having it in d-pad mode and ddi left analog/right analog, i still dont get the easy wavedashes and kbd's, but i guess thats fine sicne it feels a bit cheap imo. Still great for electris tho either way you set it up

@katze9912

5 ай бұрын

Could you explain why this distinction matters? As in, are there pros and cons to what you’re describing vs what the setting the video describes

@bowsrcs

5 ай бұрын

@@katze9912 This setup mimics the inputs you have on a pad (dpad + stick). While I'm not familiar with tournament rules, I see this as the most likely setup to be legal, since the game will see the buttons as two distinct inputs. A keyboard can already do this in the in-game button mapping menu, so doing it on a leverless isn't much of a stretch in my eyes. It is still mapping an analog input to a digital one, though, so I wouldn't go using it in tournaments without double checking the rules first. If you don't plan on ever competing, then this distinction doesn't matter. The setup in the video is arguably better since you gain full benefit of the SOCD cleaning on both buttons, rather than it only applying to inputs of the same type.

@katze9912

5 ай бұрын

@@bowsrcs makes sense, thanks!

@Chris_F

5 ай бұрын

Wish I was as knowledgeable as you when I made this video!

You can do socd for pewgf, not really that useful but it's there. frame 1: f frame 2: b frame 3: d+f(analog)+2 Alternate input frame 1: f frame 2: d+b frame 3: f(analog)+2 The first input cannot be done out of dash or cd but the second one can. The benefit of this method is that you dont have to release any buttons to input ewgf, aiding in speed and reliability

Just got this hitbox in this video and ngl when i stumble across this vid im finally reaching my potential of becoming a sweaty mishima thanks man for getting into hitbox

@Chris_F

2 күн бұрын

Glad I could help!!

Thank you 🙏 as a new Mishima main I was looking for this vid

@Chris_F

5 ай бұрын

Glad it helped!

I literally coudnt electric at all and then in a hour I hit 7 in a row with the new binds thank you so much!

@Chris_F

4 ай бұрын

Love to hear it! My pleasure bro now go dab on em with the electrics

This is so helpful. Thanks for the vid!

@Chris_F

5 ай бұрын

No prob! Thx for watching

Dude thank you so much this changed the game for me with ewgf!

@Chris_F

3 ай бұрын

Glad I could help!

thanks for the guide now i do 2 ewgfs on hitbox slowly but surely i can do 3 like i used to on controller great video

@Chris_F

5 ай бұрын

Glad I could help!

ive been begging for a hitbox style cross up that doesn't use the awful layout of the cross up. holy shit, im sold!

Completely new to leverless, might be a silly question but could you show how to get your button layout on steam?

@Chris_F

5 ай бұрын

I’ll put together a KZread short for this

Awesome showcase, I've been in the market for a more travel friendly option compared to the OG hitbox and the extra buttons for EWGF and DI in SF6 are a bonus!

@Chris_F

5 ай бұрын

Can’t recommend this controller enough! I have a review video up as well so check that out if you need more info

@every_kyle

5 ай бұрын

@@Chris_F I ordered my own after the review. It's time to grind and get good with it!

This is one of the best gaming channels easily

@Chris_F

3 ай бұрын

Thank you so much!!!

Nice content bro. I do this same thing with a slightly different configuration. I mapped the left input to the button above the two punches for easy 2p side mechanics in general (not just mishimas) but it was getting hard for me to do wave dashing + ewgf with the SOCD method you explained in a previous video. No problem with 1p side, everything is easy without having to setup extra buttons. I will try this new method on a second profile to see how it goes.

@Chris_F

5 ай бұрын

Let me know what you think of the new settings!

Great video, i mapped L1 to down a week ago because that way i can kbd while keeping my fingers perfectly over the attack buttons but i never thought to try this other stuff

@Chris_F

5 ай бұрын

Let me know what you think of my method, curious to hear your feedback!

@heroicsquirrel3195

5 ай бұрын

@@Chris_F just waiting on the haute m to arrive then ill test it

@Chris_F

5 ай бұрын

@heroicsquirrel3195 did you go with the M16 or M13?

Good job Chris you really helped us with those ideas you have my like 👍 ❤

@Chris_F

5 ай бұрын

Yay! Thank you!

This is a crazy guide, thanks for releasing this. Any plans for making a guide for 16 buttons?

@Chris_F

5 ай бұрын

Thanks! I’m sick with corona so I won’t be posting anything for a few more days. It’s been a rough week 😞 Having said that, if you know how to set it up for standard buttons I’m sure you can figure out how to get it going for 16 even without a guide!

@BlazingAmber

5 ай бұрын

@@Chris_F That’s all good, I’m happy with my Haute42 T13 anyways and just thought I’d ask about for the 16 button variation if there’s any more ways to make certain inputs easier ! But I hope you get better Chris, can’t wait for more Tekken content!

ordered one already, great video!

@Chris_F

5 ай бұрын

Hope you enjoy it! Let me know what you think bc I’d love to know! It’s been a long time since I was this happy with a new controller

Good stuff, my man. Thank you.

@Chris_F

5 ай бұрын

You bet! Thanks for watching

absolutely game-changing setup for KBD and electrics. mapping left and right on 8 and 12 works pretty great but I'm curious what buttons you use for left and right (from the haute 16 button layout)? i have a regular m16. thanks a lot for ur guides, really underrated!

@Chris_F

Ай бұрын

Glad you liked it! I’m suuuper busy with M Bison stuff so let me get back to you since I can’t recall my settings off the top of my head. Get back to me if I forget to replay (but I’ll try not to forget!)

@Duks66

Ай бұрын

@@Chris_F no problem sir. have fun on SF6! do you know if there's a way to remap buttons on fightbox/hitbox/arcade style leverless? i have a fightbox f1 and the m16

I ordered a Haute42 T16. Can't wait to get my hands on it.

@Chris_F

5 ай бұрын

Let me know what you think once you try!

@ynadmiranda1631

5 ай бұрын

I have the same haute model, how did you map the buttons? I need help 😅

@mrlyles2002able

5 ай бұрын

@@ynadmiranda1631 I haven't changed any button mapping. Not brave enough.

@imnotdirtydan4113

4 ай бұрын

@@Chris_Fdo you need a converter for the haute on ps5

Any chance you could do a breakdown of your button layout for the t16 & how to program it?

@Chris_F

5 ай бұрын

Yes once I recover from being sick 😷

@howaboutdat

5 ай бұрын

@@Chris_F awesome, as someone who isn’t computer savy at all, it’s confusing hell 😅

So what are your inputs on your 16 key hitbox, since I also have one? I assume the standard Button Layout and then the left Dpad above of X and Y and the right Dpad under A and B. Is that right? Thank you in advance.

@Chris_F

5 ай бұрын

Yup, I use those buttons you mentioned. I like to use the button next to RP for LP+RP (to break throws) and the button next to RK for heat burst

Game changer. Thanks dude

@Chris_F

5 ай бұрын

Happy to help!

Hey man! Great vid! What’s the music you use at 2:55 btw???

@Chris_F

5 күн бұрын

Oh man I can’t remember the name but it’s from a jason sanders mix on KZread

@officialwalmartgreeter

5 күн бұрын

@@Chris_F I’ll be on the hunt 🫡. Please lmk if you find it, I love vapor wave!

Yes! Love this!

@Chris_F

5 ай бұрын

Thx!

hey could you make a quick vid on how you would imput the commands on with top and bottom buttons?

Hi Crhis! I hope you will reply. I bought S16 and im having so much fun using it thanks to you. I can do electric like 19/20 times without an issue. Thanks to your guide. I was able to master wavedash into electric side step electrics.dash electric. back step and so on. double electric is not an issue on p2 side(right) but on p1 side. But I started to notice something about doing 2 consecutive electrics on Player 1 side. (left) first electric is always ok. But the 2nd one is inconsistent. And for some reason I'm 100% sure im pressing the same button. but the input showing on my screen like 80% of the time when I do the 2nd electric on p1 side is F D DF+2 no neutral. I was able to get electric. but sometimes just DF2 move not the electric. I can't understand why it's happening on p1. but not on p2. On p2 side. 2nd electric is F N D DF+2. but again on p1 it's inconsistent and most of my input on 2nd electric is without Neutral

@Chris_F

28 күн бұрын

I think it’s just a timing issue, try doing the input either a like bit delayed or slower

@prancerjohnponce6889

27 күн бұрын

thanks for the reply. i will practice more.

@prancerjohnponce6889

27 күн бұрын

@@Chris_F bro. good news. its now consistent. before i'm using dpad. then left right on the extra button. but when i change it into left analog. its more consistent.

@prancerjohnponce6889

27 күн бұрын

@@Chris_F bro. good news. its now consistent. before i'm using dpad. then left right on the extra button. but when i change it into left analog. its more consistent.

hey thanks. I just don't get why the ps4 input/left analog thing is necessary ? if you stay in d-pad and xinput mode you can still bind left and right to pin18 and pin19. Am I missing something ?

@ryanman658

5 ай бұрын

I don't think xinput mode allows multiple direction binds to the same pin

@Chris_F

5 ай бұрын

More of a technicality to make it tournament legal

Okay this setup is actually brilliant lol, true Crossup style leverless advantages You mentioned that on your personal layout you had the second set of movement controls mapped to the bottom and top "extra" buttons on the T16. Got mine after I saw your video a few weeks back and it'd be cool to see another video or maybe a short of you doing some of these using the T16 extra buttons. Why do you prefer using those compared to the normal ones you showed in this video? Curious

@Chris_F

5 ай бұрын

So glad you like it! TBH I thought I would get a lot of angry comments about this which is why I took so long to upload this video. Did a lot of research to make sure that everything is tournament legal and then I decided to just upload it. I stream on twitch! I’ll be streaming Tekken all weekend so check it out there if you want to see me with my layout (link in bio) Short answer tho: I do it my way bc I like to use my ring finger to do 1+2 since throw breaks have a bit of a bug in this game - I have a KZread short about this so check that out too!

Thanks for the great vid. I have a traditional hitbox setup / binds and have been experiencing strain on my left hand playing Mishima, Going to try your binds and see if it helps! You referenced hitbox crossup in your video; Have you ever tried one out? Im curious if that might make it even easier on the left wrist to use a stick + inputs, but I don’t have any way of trying it out unless I buy it. Thanks again for the great video!

@Chris_F

5 ай бұрын

Glad it helped! I don’t own a crossup controller but I have tried it. I think it’s worth looking into if you are experiencing pain with a regular leverless controller

@oceanbijuu

5 ай бұрын

Thank you for the reply! If you don't mind me asking, what was your impression of the crossup? I have never used an arcade stick (only played KBM games), so I am a bit hesitant to drop $300 on it and can't test it first IRL in my area. Just trying to gather as much info as I can to know if it is worth ordering for me. Thanks again

@Chris_F

5 ай бұрын

@oceanbijuu don’t spend 300 on this, the PCB is cheeks. Either build your own with a GP2040-CE board or buy the controller I have for $90 USD

@oceanbijuu

5 ай бұрын

Thanks for the advice; I'm very new to the FGC. I don't have any knowledge on building my own hitbox. Would the Haute 42 T16 (I watched your review :D )be your recommendation as the best hitbox to purchase above all else? I have a good budget to work with, so I am not as concerned about the price; just quality. Thanks for taking the time to help me out in the comments. Really appreciate it.@F

Just bought myself a mixbox thanks for the video

@Chris_F

5 ай бұрын

No problem 👍

How do you do electrics and hellsweep with your layout (button above 1, 2 mapped to left dpad and the button below 3, 4 to right dpad)? You press with with your thumb or what? D: I got a t16 and Im interesed in trying your layout D:

@Chris_F

5 ай бұрын

1P electric is F, N, D (left hand) then right thumb (F) and right middle finger (2) 2P electric is F, N, D (left hand) then right middle finger (F) and right ring finger (RP)

Thanks so much for your reviews i am waiting now for my m16 plus But i didn't understand how i set it for extra buttons?

@Chris_F

4 күн бұрын

Check out this video I made, it’ll show you what to do! Haute 42 Pin Mapping Guide (SF6 and Tekken 8 controller settings) kzread.info/dash/bejne/pnqV1LOlhZa_YLw.html

Btw are these settings applicable/allowed for tournaments? I think you're not allowed to map the same input for more than 1 button.

@Chris_F

5 ай бұрын

It is legal! I didn’t map the same button, I mapped the left analog stick and the dpad to my controller, which is the same thing you can do through the in-game menu with a PS4/5 controller

About time someone did this!

@Chris_F

5 ай бұрын

I was surprised no one did!

hi, could you clarify how you assigned analog sticks to the buttons, in the web configurator I only see pins for the dpad and standard buttons

@Chris_F

5 ай бұрын

I’ll have this out shortly

@mottekeeee-qp1lk

5 ай бұрын

​@@Chris_F ah thanks for fast answer :D I already found the answer on reddit, but I think it will be useful for others, it's not as obvious as it seems​

@chroma2241

5 ай бұрын

@@mottekeeee-qp1lk Hey! Could you help me find that reddit post? I can't seem to find an answer, thank you

@dawg8183

5 ай бұрын

up

How do you map that on steam? Or even on the hitbox config? I tried and I coun't get any diagonals. It moves left and right but when I press the button with the down button it gives one of the two inputs.

@Chris_F

4 ай бұрын

What controller do you have?

Thank you very much for the help I can now do normal electrics consistently. But I can't understand your instructions for the PEWGF aren't you just doing the same input as EWGF just faster? If you could clarify the difference between the two I would greatly appreciate it.

@Chris_F

5 ай бұрын

But of a common misconception but the inputs are not the same. A regular EWGF that all mishimas use is F, N, D, D/F+2. PEWGF can only be done by Kazuya and Reina in T8; the input is F, N, D/F+2 Check my inputs in the video

i have the haute42 and play on ps5.. what is the setting i should do?

@Chris_F

5 ай бұрын

Through the haute 42 settings, same as me and it’s in this video

@ali.3834

5 ай бұрын

@@Chris_F done thanks

Just got a t16 the other day, awesome content thanks man

@Chris_F

4 ай бұрын

So glad I could help! I really love mine

For wave dash its literally easier and faster to just move your righthand index finger over to your right movement button and alternate between the two the hitbox channel has an example of faster wavedash where they explain it but your method is slow. Im a kazuya main so your way is def slower.

@Chris_F

4 ай бұрын

If you took any time to check you’d see that I have a video about this input method too.

@bossnone739

4 ай бұрын

oh, my bad I didn't mean to come across hostile I think it's good to have a lot of different ways because everything is personal preference anyways. @@Chris_F

@Chris_F

4 ай бұрын

My bad too, it’s hard to understand someone’s tone from comments. Sorry! Thanks for watching and for commenting

So how do I get these setups on my hitbox, I have the exact one you have, but I’m only one ps5

@Chris_F

5 ай бұрын

Same settings as what I have in the video but you’ll need a ps5 adapter to connect your controller

so button above lp or 1 is for right direction and button below lk or 3 is for left direction what buttons do you guys have for 1+2/3+4 heat and rage bind?

@Chris_F

2 ай бұрын

1 2 1+2 1+3+4 (Bryan taunt) 3 4 heat super

@psuedotoxin

2 ай бұрын

@@Chris_F ah i see. im a kaz main so i opted for 1,2, 1+2, 3+4 3,4, rage no bind i got my heat binded to the button on left of up button. not sure if its a good placement on not.

As I also have a T16, is there any benefit of mapping the left analog to above and below the left punch/kick over what you used in the video?

@Chris_F

4 ай бұрын

It really comes down to preference. I’ve been experimenting with some different placements but I haven’t settled on anything yet

Hello! On the Haute configuration my board is set to change pins instead of assigning action to a specific pin, making it impossible to assign two buttons for the same action, any idea why this is? . Great video im really glad that someone did a tutorial with the same stick i got

@Antie97

5 ай бұрын

I had to update my firmware to get the new pin configuration menu. They have a tutorial on the haute42 website under the support section.

I'm completely new when it comes to FGC peripherals. How do I use a pico board for the leverless like you did? Or is the Pico baord already inside every Haute42 product?

@Chris_F

3 ай бұрын

It has a pico (GP2040) inside

Do you think you could make a short video detailing the same techniques but with your 13 button layout? My T16 is on the way and I've been looking for all the different ways people use the additional buttons so I can try to figure out how I would like to use them.

@Chris_F

5 ай бұрын

Great idea! I’ll make a KZread short about this

@hydra6391

5 ай бұрын

@@Chris_Fwould appreciate this too 😊

My question is how would this work for locals. Most are run on a PS5 and so it has me wondering if u use a converter (i.e a Brooks Converter) does the PS5 recognize the device as a controller and will it understand that the pins are different directions. Its hard to put into words, but if i take my Haute leverless with a brooks converter to a local will it remember all of the settings that are on the controller or would i have to change the settings on the PS5 which i feel like most people would find issue with.

@Chris_F

25 күн бұрын

So the RP-2040 board in a haute runs on two processors. The converter runs through one, and your main settings/inputs on the second. There is NO need to reset/reconfigure your settings as long as you set up everything properly! I used these exact settings on several PS5 consoles at evo japan with no issues at all

@balkonee

25 күн бұрын

@@Chris_F Thats awesome. Thanks for the vid. Ur content is dope and i love seeing all the tips and tech videos u do. 100% has made me a better fighting game player. Cheers.

I have the same controller, what is your exact layout?

@Chris_F

5 ай бұрын

Top button is left Then 1 2 1+2 1+3+4 (for Bryan’s taunt) 3 4 Heat Rage art Right

Did you have to update your firmware? I have the same device but my pin mapping page looks much different

@ryanman658

5 ай бұрын

i.imgur.com/BkNcDNu.png

@Chris_F

5 ай бұрын

Yes I did, I’m on the newest firmware

@nevermore5216

5 ай бұрын

@@ryanman658 Did you figure it out mine looks like that too

@Chris_F

5 ай бұрын

Update your firmware

@nevermore5216

5 ай бұрын

@@Chris_F Thank you

I have the razer one, how would you copy your mapping into the steam controller profile?

@Chris_F

23 күн бұрын

Sorry it’s been months since I tired so I don’t remember. I’m a GP-2040 boy all the way

Honestly this feels too good to be true but if its allowed in tournaments im 100% on board with this

@Chris_F

5 ай бұрын

I’m pretty sure it’s ok! Go for it

can someone tell me whats the difference between setting it on dpad mode on left analog stick. I never did that and went straight to pinmapping. It still works fine but dunno if it messes anything

@Chris_F

2 ай бұрын

For casual play there is no difference, but you need to do this if you enter tournaments. You cannot have double inputs (ex: two dpad buttons) in a tournament so you need to set the extra input to either dpad or analog stick

i bought the haute42 m16 and im trying to emulate your settings. im on pc, so i put the d-pad mode to left analog too, but on pin mapping i only have left/right and ddi left/ddi right (no idea what ddi stands for). i don't get the same settings as you where i basically have 2x left and 2x right input

@senX

4 ай бұрын

so you put in on left stick, so the controller native left right up down buttons are mapped to mimick stick inputs. it works for me, but i have no way of binding dpad left/right anywhere then. when i go into tekken8 button mapping and check keys, it just looks like i bound 2x leftstick left and 2x rightstick right inputs. what am i doing wrong? :

@Chris_F

4 ай бұрын

Sorry I’m not at home right now but I will get back to you

So for 16 button controller you use the top button as forward and the bottom one as back?

@Chris_F

4 ай бұрын

That’s what I do. You can set it to whatever you like!

im following all the steps and for some reason the buttons still are not mapping correctly and my up/down/left/right doesnt work in game

@Chris_F

3 ай бұрын

Which version of the firmware are you on?

How would you do that on a Keyboard? I know it should be similar but the button layout on a keyboard is way different, I currently use a WASD and a mirrored WASD on the right side for attack buttons.

@Chris_F

3 ай бұрын

Not sure since I’ve never used keyboard for fighting games. If it doesn’t have SOCD settings available then this method, as is, won’t work

Can you make a video for ps5 only because we don’t have button map :(

@Chris_F

5 ай бұрын

Sorry, I don’t own a ps5 so I can’t capture footage for that. From my research, I think the only way you can do it on ps5 is with a GE2040-CE pico board, edit pin mapping through the controller menu on a computer, and then connect a brook ps4->ps5 converter to your controller

@YamatoFGC

5 ай бұрын

Ah man that sucks but great video regardless and thank you a lot for the help

@Chris_F

5 ай бұрын

No worries bro sorry it doesn’t work for you

@mor1420

5 ай бұрын

@@YamatoFGCwhat controller do you use?

@twistedmainframednb

5 ай бұрын

I'm having the same issue.we need a ps5 guide

Would you put left analog stick on the above or below button?

@Chris_F

5 ай бұрын

Personal preference really

How do you map right analog stick right and left?

@Chris_F

Ай бұрын

Check my pin mapping guide for how to do that Haute 42 Pin Mapping Guide (SF6 and Tekken 8 controller settings) kzread.info/dash/bejne/pnqV1LOlhZa_YLw.html

really wish it was possible to map buttons on ps5 like on steam, i pref to play on my ps5 ;_; i use a razer kitsune

@Chris_F

2 ай бұрын

That’s why I tell ppl to avoid buying the Kitsune, it’s way too expensive for the internals you get

can someone explain the layout i dont get it off of his explaination

is the 16 button controller with this good for non mishimas or no? debating between a 13 button and a 16 button I'm worried about the extra buttons getting in the way.

@Chris_F

4 ай бұрын

Good for non Mishimas too. If you find that the extra buttons get in the way, you can just disable them in the controller setup menu. IMO, better to have and not need than to need and not have!

Can you change your Left Stick controls on console or is it only for PC?

@Chris_F

5 ай бұрын

Has nothing to do with pc or console and everything to do with your board. This won’t work on a razer kitsune for example

I tried this and it works even better than I could have imagined. The only problem is that I think this kind of remapping is actually banned in tournament. Do you know if that is the case?

@Chris_F

4 ай бұрын

Glad to hear it helped! I’ve done my homework, read over the TWT rules, and asked members of the community, and I feel confident in saying this is tournament legal. All this is doing is making what is possible on a PlayStation controller possible on a leverless controller, albeit far more ergonomical/practical due to the nature of the button layout on leverless. I’ll be entering TWT events this year so I makes sure this is legal since I’ll be using this setup

I can't seem to get my hitbox to do the left or right with the extra buttons. I followed the beginning steps but when i try it in game it doesnt want to work. ANy help?

@Chris_F

5 ай бұрын

Did you update your firmware?

I’m looking to get a haute t16 for my ps5 what issues would I run into if I get it? I heard that I would need a adapter or something

@Chris_F

4 ай бұрын

You’ll need to a) update the firmware b) buy a ps4->ps5 USB adapter

My settings doesnt look like your settings so i cant bind left analog Stick to pin 18 as you showed in min 0:56 😢 do I have to Update something?

@Chris_F

5 ай бұрын

Update the controller firmware! Should be 0.77 IIRC

How to a map analog to buttons

i need a right side tutorial

@Chris_F

4 ай бұрын

I have both sides included in this video. Do you need something else?

So its better to use this instead of a pad for mishimas?

@Chris_F

5 ай бұрын

“Better” is subjective and comes down to what you like more. That said, this controller is very affordable and, personally, fun to use! If you’re interested I highly recommend it! I also have a review video up

hey how can i do this on steam i got the razer kitsune and cant seem to get it working

@Chris_F

2 ай бұрын

Might not be possible on a kitsune. I don’t own one so I can’t test, sorry!

For the PEWGF how do you go from f,d,df+2 without having the neutral input on leverless?

@Chris_F

5 ай бұрын

You just gotta do it so fast that it doesn’t register neutral

I'm using this on PS5. There's a touchpad button that you have to press to reset in practice mode. Do you know how to do that?

@Chris_F

2 ай бұрын

Sorry, I don’t own a PS5 so I don’t know. I’d ask on their official discord bc everyone there is very helpful!

@CouncilOfTheWolf

2 ай бұрын

@@Chris_F No problem, thank you. Turns out one of the top right buttons is already dedicated to that lol.

Why change the inputs to left analog stick instead of another dpad input? What does that change?

@Chris_F

4 ай бұрын

Having two buttons control the same input isn’t tournament legal. By setting the right hand buttons to the analog stick we avoid that problem

@shantheman9922

4 ай бұрын

@@Chris_F so it's a loophole? Why is that even a rule?

Hello I mapped Ddi left and right but I cant use it :( (xinput)

@Chris_F

Ай бұрын

Did you enable dual directional input in the add-ons menu?

@jaye9771

Ай бұрын

THANKYOU BRO 😭🤣

Does it still work when you set your socd as up+down=up ?

@Chris_F

4 ай бұрын

I didn’t test it but I would assume it does

I don't know what I'm doing wrong but the settings are very confusing. I can't map my rightside UP and my rightside Down (Haute42 T16) buttons.. I'm doing something wrong..

@Chris_F

5 ай бұрын

Are you on the newest firmware 0.77?

@yenhyun1190

5 ай бұрын

@@Chris_F I found a reddit post that fixed the issue for me. Still thanks for trying to help. Keep up the sick content.

your configurator looks different than mine. did they update it or something?

@beerbeerbloxberg

5 ай бұрын

Same Problem here

@Chris_F

5 ай бұрын

Yes, you have to update your firmware

Can you help me on how to do iwr 2 dragonov move that killing my I don’t know how to do it consistently

@Chris_F

5 ай бұрын

I don’t play him but let me try and I’ll get back to you

Does that hitbox come with the GP-2040-CE board?

@Chris_F

5 ай бұрын

Yes!

what button u mean why u say under left kick u mean ur original up button or the the one under rigth kick

@Chris_F

5 ай бұрын

The one under and between LK and RK

PLEASE someone explain how i do this on steam, i am having such a hard time lol

@sergiok6660

Ай бұрын

I'm using a victrix all button

Im on ps5 but i the button mapping tab for the ps5/xbox controller is not in my settings

@M0J0SD

5 ай бұрын

I don’t think this feature is available for PlayStation users unfortunately

@coffee_creamer5470

5 ай бұрын

@@M0J0SD damn i bought a snackbox and everything

Can I do this with hitbox on PS5

@Chris_F

3 ай бұрын

You mean hitbox the brand? Technically yes, but you’d need to a) replace the board with a GP2040 and b) drill holes for additional buttons

im on pc but i cant seem to get the KBD to work, it seems to register the directionals as the same button. i seen you never lifted one of your fingers when doing it and it wont work for me, do i need to change my board to ps4 mode like you have it ?

@Chris_F

5 ай бұрын

I’m not sure since I’ve never played any fighting game on keyboard. It is possible though. Maybe someone in the comments can help with this. Sorry 😞

@isciajones6012

5 ай бұрын

@@Chris_F im on the t16 like you , i didnt mean to phrase it like that, when i change my pins to left and right after putting in in analog mode, im not getting two separate imputs like you are, where am i going wrong

@Chris_F

5 ай бұрын

What firmware are you on? It has to be the newest one (0.77 IIRC)

@isciajones6012

5 ай бұрын

@@Chris_F its up to date, first thiing i did when i got it , so when im in the web config , you dont say anything but changing to left analog input and changing two pins, is there more that im missing? you are playing on PC right or are you hooked up to ps5 because i see that you changed your mode from xinput which is what it is normaly on to ps4,

@kech267

5 ай бұрын

I think you probably didn't save the left analog on the bottom, i think i had the same problem.

Are ther buttons mapping settings for the ps5?

@Chris_F

4 ай бұрын

The platform doesn’t matter, the controller does. These settings are for controllers with a GP2040 board

How can I get this pad setting with fight box F1 leverless? It is possible?

@Chris_F

2 ай бұрын

I don’t know what board it uses, but it’s impossible if it doesn’t use a GP-2040

@CrosslifeIDN

2 ай бұрын

@@Chris_F damn i check it, my controller not having it, if i buy brook UFB will it work?

@CrosslifeIDN

2 ай бұрын

I'm using steam layout RightNow, but if I come to offline event for sure I can't use this steam layouts

@Chris_F

2 ай бұрын

@CrosslifeIDN no unfortunately. It has to be a GP-2040 board

@Chris_F

2 ай бұрын

@CrosslifeIDN that’s why I think the haute42 is one of the best leverless controllers on the market right now

Someone explain how to do this in steam controller settings

@Chris_F

5 ай бұрын

Big picture mode, controller settings, enable steam controller input, map LS to any button you like

How do i do that layout on the official hitbox? Anyone know how?

@88drezden

5 ай бұрын

You would have to drill into your box to add the buttons.

so if i have to remap through steam, how would i compete in tournaments that r 99% on ps5..?

@Chris_F

4 ай бұрын

Not possible unless you have the same board as a haute42.

@fall7778

4 ай бұрын

yeah i have been looking into it the last hour. i currently have a snackbox micro, but the haute42 t13 looks good and i really like the open source aspect of it. do you think its worth picking up? it’s pretty cheap rn

@Chris_F

4 ай бұрын

@fall7778 incredibly worth it. However, I recommend the 16 button version because you can always disable the extra buttons if you don’t need them. Better to have and not need than to need and not have. Feel free to ask me any questions

@fall7778

4 ай бұрын

@@Chris_Ftrue, i’m someone who loves art on my controllers so that’s the main reason haha. r the buttons big? i’ve heard they r bigger than most and that might be a problem for me ngl

@Chris_F

4 ай бұрын

The T series has enough space for custom art, and you can find templates on the official haute42 discord. The buttons are all 30mm buttons but it only took me 5-10 minutes of practice to get used to the size. IMO it’s a non-issue

man even with these settings im still struggling to time it lmao

@Chris_F

5 ай бұрын

You’ll get it! Takes some practice just don’t give up

@3boodq8

5 ай бұрын

@@Chris_F finally started to get the hang of it 👍

@Chris_F

5 ай бұрын

@3boodq8 good stuff!!

i have a razer kitsune, how i can remap the button i want via steam?

@Chris_F

5 ай бұрын

So in steam you’ll have to go to big picture mode, turn on steam controller settings and then go to “edit layout” in controller settings

@iswamii909

5 ай бұрын

@@Chris_Fi dont know if im doing something wrong, or simply the razer kitsune is not fit for this kind of stuff when i go on steam on picture mode i can control everything with my razer kitsune, i tried to bind everything to left anolog left but nothing when i open the game every imput remains the same... its been days, i tried many times and you have no idea how much i would love to do EWGD and wavedash with that imput.. it would change the way i play completely... if you can make a quick guide or just explain to me exatcly what i need to change it would be much appreciate ty for your time

@iswamii909

5 ай бұрын

forget it... I DID IT!!!.. i dont know how but i did... i love you

Can you do this mapping on Razer Kitsune?

@Chris_F

4 ай бұрын

No, sadly

@sniklenave6557

4 ай бұрын

Well I just did it on mine so

@Chris_F

4 ай бұрын

I mean, it won’t work on PS5 for tournaments

@IIIIIIIIIIIIIIIIIIX

Ай бұрын

@@sniklenave6557 how?

Hi Chris, have you tried to do the kbd this way on the haute42 16? kzread.infonSDW9Wgu2X4 He's using the jump button to get a qcb input. I was wonder, because haute42 allowed us to remap the pin (in the web config), could i remap the up (jump button) to down and can still achieved the same result? The T16 had a mixbox layout with the up button above as a default so i dont think if there are any jump input we can still do it with out the jump button below. And you mentioned in the video that you have a custom button layout with the T16, if you could, can you made a video specific about it. Thanks for this tutorial, it's really helpful. I have never thought outside of the box like this by having another forward and back on a hitbox

@Chris_F

5 ай бұрын

I don’t like the jump method because some characters have a special backflip so it doesn’t work with them. It’s absolutely possible to set up your controller that way, though, so go ahead and do it if that’s what works best for your hands

I have the same hit box how do you use it on ps5?

@Chris_F

4 ай бұрын

Same as PC but you’ll need to use a ps4->ps5 converter

This setup isn't tourney legal

@Chris_F

4 ай бұрын

As far as I know it is. It is the same setup as a hitbox crossup which is tournament legal for Tekken. This would be illegal for street fighter 6 however

@RottenPizza801

4 ай бұрын

@Chris_F it isn't, the tekken world tour doesn't allow 2 buttons that operate the same function. The crossup is only allowed because it's two different input types: a lever and buttons. That's the distinction.

@Chris_F

4 ай бұрын

They don’t operate the same function, though. The left buttons are set to DPad and the right buttons are set to analog stick, which is what’s possible on a ps4/5 controller. I’m not being contentious btw just explaining what I know from what I’ve checked

@RottenPizza801

4 ай бұрын

@Chris_F you still have two separate buttons operating the same function of moving right. At the end of the day if you can't set it up to do what you want in the in-game options menu and have to use a separate function (like the steam input settings), then it's not legal. Also ya I get you I'm just trying to explain since I just barely got told off for having the same setup when I went to my local lol.

@Chris_F

4 ай бұрын

@RottenPizza801 interesting. Thing is, you *can* replicate this through the Tekken controller mapping menu on a ps5 as long as you’re using a ps4/5 controller. The rules state that your non-pad controller can’t be set to do anything that a pad can’t (but this setup is just allowing you to do what a pad CAN). I’m willing to bet the there’s a misunderstanding going on at a technical level, which is why you had the TO give you a hard time at your local.