Minimalist Home Office Build | DIY IKEA Desk Setup
I didn't like the look of most desks online. And for the price, I figured I could make one that fits my desired look, size, and storage needs! I went to IKEA and picked up a few drawers and a wooden kitchen countertop. I work from home and I was sick of working and sleeping in the same room, so I decided to transform my den into a home office. Let me know what you think!
Countertop: www.ikea.com/us/en/p/karlby-c...
Drawers: www.ikea.com/us/en/p/alex-dra...
Пікірлер: 233
Would you have a link to the countertop?
@MakersMax
Жыл бұрын
No prob! www.ikea.com/us/en/p/karlby-countertop-birch-veneer-90335206/
@MakersMax
Жыл бұрын
Drawers it sits upon: www.ikea.com/us/en/p/alex-drawer-unit-gray-turquoise-30483799/
@decobyrne
Жыл бұрын
My man! 💪 got the drawers, thank you!
@s2klivin39
Жыл бұрын
Question, do they give instructions on how to attach the drawers to the countertop?
@MakersMax
Жыл бұрын
@@s2klivin39 No - they are all separate pieces that I used to create a "desk." All you have to do is rest the countertop on the drawers, or you can use rubber seperaters to really secure it in place. Really simple yet aesthetic build!
I did this during the pandemic because I had no desk at home. I put locking wheels on the cabinets for ease of movement.
@MakersMax
6 ай бұрын
Smart move 🤌🤙
Love it.....and the colour 💕
@MakersMax
Жыл бұрын
Thank you, Cindy! Cheers!
What I like is just how easy it is to move (3 pieces). I think that I'd put a locating pin in the top of those drawer pieces and then a tiny bit larger hole in the bottom of the table top. Then it's locked in position. Even 2 in each would be better. Impossible to slide the top off even if you pushed hard. Also, nice to see it in this colour, I was eyeing this one and it's a solid top for a monitor arm!
He worked up a sweat building a cheap desk haha
@ayabongamaseko9313
2 күн бұрын
😂😂 I knew I'd find this comment
I hope it’s Henny in that cup because I know you ain’t that exhausted from that 😂 nice set up tho
@MakersMax
11 ай бұрын
Hahahahaha
@montanafreecs7389
Ай бұрын
rs😭 he done kept both them clips in too
Awesome build. Also your bike, she's such a beauty 😍
@mistermistero652
8 ай бұрын
Bro, wtf. That thinglooks "not *that* good" at best. Also it looks very uncomfortable.
I really love the color of the drawers!
@gregorymoore2877
Ай бұрын
This is the turquoise gray color option. I got the same drawers.
I love this ❤
👏👏that was huge!! Well done!
I love the colors. Nice job bro
@MakersMax
8 ай бұрын
Thank you! Cheers!
Do you like the depth or do you wish you had more depth on the table top for your desk? I’ve noticed the ikea countertops are pretty narrow
@MakersMax
3 ай бұрын
I have plenty of space to the right and left of my monitor, so I have no complaints about depth. Plus I like being close to the screen to mitigate squinting
same setup but with risers and m3 tape so the top doesn't slip
@tearspoint8153
18 күн бұрын
Does it leave residue on the surface?
Nice I'm adding riser legs to mine 😊
I have the exact same Alex drawers, went with a different counter top! Great setup!
@MakersMax
Жыл бұрын
Thanks brother! Yours looks solid as well!
@johnharoldmeneses1530
10 ай бұрын
What countertop did you used?
Impressive build! The desk was well assembled too.
@MakersMax
9 ай бұрын
Thank you brotha!
@sealswimswim354
9 ай бұрын
@@MakersMax You’re welcome Bro!
Terrific job, beautiful desk. If you add a little graphite to the door rail slots, it'll move so much easier. Thanks for the great ideas, especially the pasta😁. More please.
@MakersMax
5 ай бұрын
Thank you for the kind words and positivity! Truly.
This looks really pretty and nice. I think I might just create my own desk now!
@MakersMax
5 ай бұрын
You should!
@racheloshaksmusic
5 ай бұрын
@@MakersMax thank you for sharing 🙏🏾😊
@yousihard8569
2 ай бұрын
@@racheloshaksmusic did you do it?
@racheloshaksmusic
2 ай бұрын
@@yousihard8569 No I decided to buy an electric desk instead because I realised that if I made it myself I wouldn’t be able to adjust the height for more space
I loved your solution. I am planing to take your idea and add a drawer for my MIDI controller. Neat idea indeed.
@MakersMax
5 ай бұрын
Lmk how it turns out!
@victorespina
5 ай бұрын
@@MakersMax sure thing!
I love this! 💙
@MakersMax
11 ай бұрын
Thank you! :)
Nice set-up 👍🏼
@MakersMax
9 ай бұрын
Thank you!
I love this!! I clicked over to the Ikea item page that you've so kindly shared with us. May I ask if the correct size is the "98 x 1 1/2"? Essentially the longest possible one right?
Beautiful sir 😍😍
Love it❤
@MakersMax
Жыл бұрын
Thank you!!
Thoughts on the draws not being the same width/depth as the desk? Will it still be stable?
simple and efficient
nice color choices bro, it looks sharpe
@MakersMax
9 ай бұрын
I appreciate that my dude!
Liked the loook of that monitor , can you name the model ? Which one it is?
@MakersMax
4 ай бұрын
LG 4K UHD 27UD88-W 27" LED-Lit Monitor with USB Type-C
Beautiful house❤
@MakersMax
7 ай бұрын
Thank you! :)
@JohnAnderson-ev3lp
Ай бұрын
@@MakersMax what kind of bike is that?
@MakersMax
Ай бұрын
@@JohnAnderson-ev3lp Super73 S2
Nice 🚲 ❤❤❤
Is table top not fixed ? What if it’s accidentally pushed. Or is it the weight that makes it stable ?
@MakersMax
5 ай бұрын
the weight anchors it for me
Hey have you experienced any bending in the middle after sometime of usage? Please let me know I’m trying to see if I should put a support in the middle or not
@MakersMax
2 ай бұрын
Surprisingly not! She's held up really well
@siavashzarani3946
2 ай бұрын
@@MakersMax thanks for your reply. I noticed you didint put the table all the way to the edge of the drawers. That’s the rout I’m going but worried about bending.
Is it treated wood. Will u sand or oil it?
E-bike battery explosions on a rise. Keep them downstairs
How can you fix the table top to the drawers
How do you stick the table down and stop it from moving? I dont want to screw it in im thinking about using sticky dots
@pedroswrld8103
9 ай бұрын
the butcherblock is like 60 lbs with its own weight it doesn't move lol
Sorry I could not open the link The countertop is Karlby But which color is it birch/veneer or oak/veneer? Beautiful combination
@MakersMax
3 ай бұрын
Hi! Thank you! KARLBY Countertop, birch/veneer, 74x1 1/2 "
Hi, i love the setup. But u should put a support leg in the middle of the table top. It will bend eventually if it hasn't yet.
@MakersMax
2 ай бұрын
Thanks! It’s been over a year and no bend or warping whatsoever
You forgot the gripper pads on the top of the two drawer units. The worktop WILL move unless you use these, or the screws provided. (I've got three of these units in this house, more in my kids' houses.)
@MakersMax
Жыл бұрын
Didn’t forget, just opted out. I have a lot of weight on the desktop and she doesn’t budge.
@jacksonlarkin4827
7 ай бұрын
Where do you get the gripper pads?
@isabellahodge4162
7 ай бұрын
@@jacksonlarkin4827 They came with the item.
I would love to get myself a set of those drawers with the exact same table top, almost identical to the setup I was thinking about. But I already built my girlfriend a vanity using 2 of those drawers on top of an entire shelf, so I'm really burnt out on building ikea stuff for a long time. I wish they sold something similar in shape/stability without having to pay $180 for a bunch of drawers I'll never use.
How did you attach the table with drawers?
@geraldcapo4400
7 ай бұрын
he doesnt
@Matt_722
6 ай бұрын
How would you even go about doing that?because mines have little holes in the bottom of the table but idk if they attach to the drawers themselves
@kengur3403
6 ай бұрын
@@Matt_722 There are wholes as I can remeber in the middle of each side of table, underneath. Drawers have same holes on same places. But, I only used little velcro straps, as you place a table down on drawers they would stick together. I'm fine with that solution 😉
@jasonalsop6643
6 ай бұрын
@Matt_722 build it upside down 😉
Isn’t the Karl by worktop 65cm in width and the Alex drawers are 70 cm in width, how did you make it fit ?
Does the top slip? Or is it sturdy?
This is an incredible accomplishment. Well done.
Does the tabletop slid around or is it sturdy if so can it move at all if you bump it
@MakersMax
8 ай бұрын
It's sturdy enough, but you could put rubber separators between the wood and the drawers, or even some 3M double sided sticky tape if you wanted.
What chair is that?
Are those drawers always that hard to close? Is that an IKEA thing on all their drawers or do they also have soft, closing drawer mechanisms as well?
@jennifertharp659
4 ай бұрын
There are several ways to help the drawers slide. I've used a product called 3-In-One oil to lubricate the rails. Graphite from pencil lead works well, too.
@MakersMax
3 ай бұрын
They are super easy to close. I was inserting the drawers for the very first time in the video, which required a bit of effort to get them properly seated. They slide like butter now though
Bro acting like he building a house 😂relax buddy don’t break a nail
@MakersMax
3 күн бұрын
Hahahah this made me laugh
Nice setup! Did you have any experience of this countertop sagging after some time?
@MartinHiggs84
7 ай бұрын
I've seen it on other videos I'm using riser legs will strengthen the middle which is a bonus.
@MakersMax
3 ай бұрын
A year later and no sagging to speak of! 👍
Hello, Congratulations Cool 👍👏👏👏
@MakersMax
6 ай бұрын
Thank you 👍
Would t they slip over?
@MakersMax
Ай бұрын
Nope
Bro barely worked at 3 seconds and he actin fatigue af son 😂
@MakersMax
3 ай бұрын
😂😂 adult Legos is tough work
looks great!! 😊what brand is your bike?
@MakersMax
9 ай бұрын
Thank you! It's a Super73 e-bike!
The desks always look great but the quality of the drawers leaves a lot to be desired. I say this as someone who just bought an ikea desk because even higher end desks were still made from quite cheap materials and so ikea won on the value side of things.
2 Alex 1 karlby right ?
@MakersMax
Жыл бұрын
Bingo
He didn’t tell me to don’t forget to like and subscribe and I fucking forgot to like and subscribe bruh ! 😭😭😭
How did you stick the countertop to the Alex drawers?
@MakersMax
10 ай бұрын
I just rested it on top. You could get some rubber separators to mitigate sliding/shifting but that hasn't been an issue in my experience. She's heavy enough to stay put on her own.
How is the top attached to the drawers? 🧐
@MakersMax
3 ай бұрын
No, just resting on the drawers
What counter top and what size or if you have the link can i get that
@MakersMax
Жыл бұрын
I just put the link in the description!
I wish you can give me your old laptop so that i can get that blessing too❤😢
did you install some of the drawers without the rails?
@MakersMax
7 ай бұрын
No, all had rails brotha 👍
Your BoP(bird of paradise) plant is in desperate need of water 😢
@MakersMax
3 ай бұрын
RIP BoP
did you screw the top onto the drawers ? Or did you just set it on top?
@MakersMax
Жыл бұрын
I just set it on top
What you having for lunch? Some bugs?
Does the top slide at all? when bumped or pushed?
@MakersMax
9 ай бұрын
If you bump it with your hip, no. If you drop down and shoulder it like a linebacker, yes.
Those drawers are soooo expensive though!!!!
So does no one drill the table down into the drawers?
@MakersMax
5 ай бұрын
You could, I didn't
Why to me dose seems small when i mesure the hight on it and i am from europe i talk in meters and centimeters
How many ft is the desk you got in this video
@MakersMax
Ай бұрын
I think it's just about 7 feet
U installed wrong way round the counterpart holes are on the other side
@MakersMax
Ай бұрын
Wrong way or not, still does what I need it to
❤❤so buity ❤❤
How do you keep your hair so fixed?
@MakersMax
Ай бұрын
Elmers glue
But did u screw the counter top down?
@MakersMax
5 ай бұрын
Nope,. Just rested it on top
Has it bent or bowed?
@MakersMax
10 ай бұрын
Not one bit
How much weight can the countertop and drawers hold mate cheers…
@MakersMax
9 ай бұрын
Hahaha, I haven't tested its limits but I'm 180lbs and can stand on it with no problem. What kind of stuff are you putting on your desk?🤣
@anisuddin4395
9 ай бұрын
@@MakersMax hahahah it’s just that I’ll have like 3 monitors 2 laptops and a few other bits etc just wondering as I saw another video elsewhere and overtime it became bent leaving a dip in the countertop due to all the weight... 😂🤦♂️😂🤷🏻♂️
@jennifertharp659
4 ай бұрын
@@anisuddin4395 The weight of that amount of tech might make the desktop bow. I'd add additional leg/supports beneath the countertop and/or a support beam running horitotally beneath it if you're placing the desk against a wall. Letting the wall brace hold up the desk in the back will help.
What countertop is that?
@MakersMax
Жыл бұрын
I just put the link in the description!
Which is the size of the table + name of the board. Is it from Ikea?
@MakersMax
11 ай бұрын
Hey man - I put the product links in the description. All items were from Ikea.
@SantoshKumar-oy4km
9 ай бұрын
Where is the description? It's a short video which has no description
@MakersMax
9 ай бұрын
@@SantoshKumar-oy4km if your on your phone, hit the three dots in the upper right corner and then hit the “Description” button
@eslender
8 ай бұрын
@@MakersMaxyou are a hero
Did this at 1am last night 😂 not joking
@MakersMax
Жыл бұрын
How'd she turn out!?
@t-rexchickennugget7496
Жыл бұрын
@@MakersMax really good
U just put deski on the containers or
@MakersMax
4 ай бұрын
Yep! The desk rests on the drawers
Your yeti is more expensive than your drill… lol
@MakersMax
6 ай бұрын
Hahaha both work like a charm
IKEA from Japan
Won’t that be fixed? What if it falls?
@MakersMax
Жыл бұрын
It's heavy enough... It hasn't budged. But you could put little rubber separators between the table and drawers to really lock it in
@AbhiRam10495
Жыл бұрын
@@MakersMax Got it. Thanks :)
@nyhamid83
11 ай бұрын
The bottom of the alex drawer unit can be placed on the top and vice versa, the bottom of the unit is make to have holes to screw into the tabletop if it is used in a desk setup
Oh my gosh such terribly hard work sweat in from that , how you like to try tearing a. Shingle roof , off . Carry 90 lb bundles up ,latter or even laying Sod down . Wh chumpetts these kids are
0:04
What’s the length of this table ? cm
@MakersMax
11 ай бұрын
187.96 cm
En mi p pais Argentina te sale mas barato comprarlo en una tienda unos 8000 mil y te ahorras trabajo🇦🇷
so many shots of you drinking water. why?
Get a standing desk..
@MakersMax
Жыл бұрын
Nah
Где диван?
LAGKAPTEN / ALEX ?
minimalist lol
The KZreadr special
Please don’t play clips of you grunting and heaving loudly
Guys a geek
I hope you were trolling, because the whole thing was very pretentious
The desk is a bit to narrow in my opinion, you sit too close to the screen
@MakersMax
Жыл бұрын
Personal preference I guess... Works perfectly fine for me!
@daweed_la8241
Жыл бұрын
@@MakersMaxnice view by the way
woth that view this is beautifull
Qui bricole en chaussettes à part les trous duc ?
great setup! shit placement o.O
@MakersMax
4 ай бұрын
Thank ya. Where should I put it?
Not a fan of the colours of the draws
@MakersMax
7 ай бұрын
Then don't buy them