Mini Countryman Rear Brakes DIY
Автокөліктер мен көлік құралдары
Thanks for stopping by my channel. Here is my DIY video on doing rear brakes for the Mini Countryman S All4. I used Zimmerman Rotors and Textar Pads
They can be purchased through My friends over at FCP EURO
www.fcpeuro.com/products/mini...
Don't forget to like my video and hit that subscribe button!
Пікірлер: 16
Hi Kevin, Changed discs and pads yesterday on my wife's paceman, all via your instructions, can't thank you enough, made me feel like an expert 😂
Mate. Thanks so much for both front and rear videos. Other than needing tools I didn’t have, they made it so easy to do the full change front and rear. Did you know, mole grips and a g-clamp work as well as your special tool? 😂😂 Also note. If from the UK (like me) think about what passengers side and drivers side mean. 😂😂😂
Great video Kevin! Thank you so much. Have you had any problems with the seat mat sensor? I have both srs airbag and seat belt light on!
Quick question. I have a mini countryman 2014 base model The mini brake kit that you are using is only for the sport car or will fit both models. I have already placed the kit that you have listed on the fcpeuro link. I will appreciate the response Thanks..
What Jack stands do you use?
Not sure if you know or not, is this similar to the newer model countryman? I have a 2022 S all4 and they are charging $800 for just pads! So I want to learn to do this for my car to save quite a lot of money.
I have the tool to compress the piston, So based on your last video you only need this for the rear pistons? Also I know you didn't open the brake lines but no need to bleed the brakes?
@milsimr0b069
9 ай бұрын
You don't have to bleed the Brakes when just replacing the Rotors, Pads and Sensors. You use the Caliper Compressor for both Front and Rear.
What tool was it that you used to compress the caliber?
@milsimr0b069
9 ай бұрын
Caliper Compressor. You can get one from any Auto Parts store. I have one from O'Reilly's and one from Matco.
@milsimr0b069
8 ай бұрын
Update: These are a specific kind of Caliper. Instead of compressing the Caliper Piston, you have to twist the Piston with a specific kind of Piston Compressor. You will be able to rent this through a Auto Parts store.
@B.I.Gdoinks
19 күн бұрын
@@milsimr0b069do you know the part number for the tool i want to buy one
What size were the reverse torx bolts?
@GraysonLynch
9 ай бұрын
According to the ones in my toolkit, they are size "e14"
Didn’t address resetting the computer
Mate. Thanks so much for both front and rear videos. Other than needing tools I didn’t have, they made it so easy to do the full change front and rear. Did you know, mole grips and a g-clamp work as well as your special tool? 😂😂 Also note. If from the UK (like me) think about what passengers side and drivers side mean. 😂😂😂