How and who do you get the v twin 250 motor or who sells it

I got one of these and it was sooooo worth it honestly!.. I even found out that I don't need a motorcycle license or even a registration through DMV in my state just a valid driver's license so this was an absolute awesome purchase for me!. And damn it all if this just doesn't sound great as it is!. Great for beginners or anyone wanting to start riding but are afraid of higher CC bikes!.

@imhappyandyou.4003

5 жыл бұрын

@Kush Kuniss Sorry it took me so long to get back to you. But unfortunately I don't even ride if it's going to rain or just rained I'm always worried that I'll slide out and dump the bike. But I do get covered in dust pretty bad on my back so I'd say it would kick up water and get you pretty wet if not drenched. Hope that this helps you. Stay safe and have fun!. 🙏

@sachapepermans738

4 жыл бұрын

@@imhappyandyou.4003 sure, but you can easily build a custom back fender for this baby.

@sachapepermans738

4 жыл бұрын

@@imhappyandyou.4003 you put in a v-twin too?

@imhappyandyou.4003

4 жыл бұрын

@@sachapepermans738 I have one but I haven't got around to installing it yet sadly. But the engine it came with isn't bad at all and is pretty reliable but if you're at least 200 lbs or more you'll only be able to hit about 50 mph maximum while redlining it like an SOB which isn't good. But again it's an overall nice bike and I would recommend it especially for the price and deliverd straight to your door.

@sachapepermans738

4 жыл бұрын

@@imhappyandyou.4003 Yeah I'm about 80-90 kilos so it's ok. I want to know how to hang the v-twin in as it looks and sounds much better.

Beatifull :)

Bro I've just brought this exact bike 🤩am currently fixing it up as a projector was a burn find.

@drama8019

3 жыл бұрын

@@curtisjohnson1140 hey I found mine on market place of Facebook in New Zealand. Is almost up and running

@drama8019

3 жыл бұрын

@Daddy Savage what do you mean? But yes mine is 250cc runs a lifan 250cc

@drama8019

3 жыл бұрын

@Daddy Savage oh right Haha I think I've convince my friends to get one also so uma search that too cheers

@drama8019

2 жыл бұрын

Its taken awhile but I've finally got mine running gettingthe final bits next week the onto paint and body yeoow

@bayoufishingmglfool2810

2 жыл бұрын

@@drama8019 have you gotten it to be v-twin?

Always wanted to buy one of those just for that

Is that the Lifan V-Twin? I have the exact same bike in blue and I was thing of going with the Lifan v 250cc Right now it has the stock DongFang 250cc

@shawnsharpe3598

4 жыл бұрын

Thinking**

A lot of upgrades

@micky5987

2 жыл бұрын

Hello Several works have been done to be able to mount the twin cylinder I had to modify the frame and reinforce it I had to do the mufflers and also do the intake manifold

Wonder where he got the flange to make a side draft setup

Is this custom-built or was it brought like this in factory I'm wondering. saving up money now looking forward to having a scooter. I'm 5,2 hoping the mini chopper would be perfect me

are those a good size?

How did u do ur intake and where can i get one

Show gostei d mis parabéns muito linda 🤩 deixa eu voar um dia com ele me escrevi aqui no seu canal Tmj

Hey Micky. I have a few questions regarding the jackshaft,the side draft manifold etc. How can I possibly reach you other than in comment section here? I am currently building mine with that same engine and encountered some bumps on the way...I need your advice man :)

@sachapepermans738

4 жыл бұрын

Had some questions too. Can't find any other project like this and I want to change engine on mine too

What type of exhaust pipes is on it

Damn this baby sounds pretty good i need one asap

@imhappyandyou.4003

5 жыл бұрын

SaferWholeSale.com for about $2,200 right to your door!. It's a good deal for what it is and even better for beginners!.

@AngelA-kv5lt

4 жыл бұрын

Is it the same model.? And where from

@noahpaulette1490

4 жыл бұрын

@@imhappyandyou.4003 they are down to around 1300 kinda pricey but cool that you can buy a drop in small displacement vtwin that's a manual.

What make of engine is that please.? Did it come with the bike or was it originally a single cylinder which you replaced, thanks

@micky5987

6 жыл бұрын

Hello original had a cylinder I had to reinforce the chassis and I bought in the US the twin 250cc engine

@spidiq8

6 жыл бұрын

Thanks for replying, what make is the engine please, I'm specifically interested in that.

@minedyourselfvlogs

5 жыл бұрын

@@spidiq8 that would be a lifan 250cc engine

@sachapepermans738

4 жыл бұрын

@@micky5987 where did you reinforce it?

Im thinking about doing this to mine how hard would this be

Please explain, I know these come with a single cylinder 250 so ?

@sachapepermans738

4 жыл бұрын

The Vtwin Lifan (for mini chopper) fits on this one. The second thumber takes the place where your carb goes on the stock model. The carb (as you can see) is in between the two thumpers. I am checking as well to get one like this. Then rebuilding my tank to give it that more custom feeling and probably doing something with those ugly side panels.

What kind of back sprocket on there

this is the China style bike u can get in a 200/250 cc single cylinder chopper correct? so how and what did u do to adapt the v-twin into it

@micky5987

7 жыл бұрын

hello I reinforced the frame and mounting the V-TWIN 250

@sachapepermans738

4 жыл бұрын

@@micky5987 where on the frame did you reinforce? Did you rebuild the frame completely? I am planning this too on mine but not sure where to start and when this happens, my hacksaw starts to itch :D :D

@micky5987

4 жыл бұрын

Hi Sacha The frame in the front part remained the same I had to move and modify the back part of the frame. By removing all the fixing supports of the old engine. When I created the housing, I put the engine in and built the new fixings, keeping the new engine in line with the chain

@sachapepermans738

4 жыл бұрын

@@micky5987 Oh ok. Did you change existing (frame)tubes to other tubes or kept original? My bike is on the way so can't really calculate the extensiveness of the project. Was it a big job to do? And with the v-twin, was there a big difference of alignment? Is there any way we could stay in contact for if I have any questions? Much appreciated already.

@sachapepermans738

4 жыл бұрын

@@micky5987 any update on the above follow up? Any chance we can connect somehow, to run through some things? Or when I run into issues while changing?

Wh r re did you get the engine from or did you build it

@micky5987

5 жыл бұрын

Hello I took the engine in the USA

Where did you get the engine from and how much did it cost.

@micky5987

6 жыл бұрын

the engine was bought in the USA cost 800 $

@daleholmes241

4 жыл бұрын

@@micky5987 where exactly u get engine and what kind of engine

How fast does it go now ?

@micky5987

2 жыл бұрын

150 kmh

Nice 250cc mini Harley ware can you get the parts like what was on your mini 250CC Vtwin motorcycle to convert my air cooled one to One like your 250cc chopper

i want to know where did you buy thise chopper ...i need the information cuz i want to buy me one asap

@joannebribleck7963

7 жыл бұрын

It's called Scorpion, just google scorpion 250 chopper

@lettoG4ya

4 жыл бұрын

Belmont bikes sells the newer version of this look up 2018 villian 250cc

Sweet who makes it and how much

Do you still have mini chopper if so would you sale

How can I order this v twin mini chopper? I want one

Do you still have this chopper I've been looking for one aabou6the same year 08 or so?

@micky5987

4 жыл бұрын

Hello Yes, I still have it

@AngelA-kv5lt

4 жыл бұрын

@@micky5987 are you interested in selling it

@micky5987

4 жыл бұрын

@@AngelA-kv5lt Hello Where are you from?

@AngelA-kv5lt

4 жыл бұрын

@@micky5987 Michigan, 15 minutes south of Detroit and about 20 minutes north of Ohio border

@AngelA-kv5lt

4 жыл бұрын

@@micky5987 where are you from

Is it for sale

So cool but you better hurry up and call me it's bad to the bone trust me I rode one and I'm going to buy one I'm just waiting they are worth the money

I believe the motor is a Lifan 250 from China

@micky5987

5 жыл бұрын

Yes

@bayoufishingmglfool2810

2 жыл бұрын

@@micky5987 is there any way you can post a link for the motor, I really want to build one, just finished my fan boat need a new project

i wunt one

Where do u get ur parts

@micky5987

6 жыл бұрын

I do not understand the question

@thomasenlow3669

5 жыл бұрын

where do you buy parts cuase ive got one and can not find parts everything but my bike pops up when i google it

@mikehunt2552

5 жыл бұрын

All of the parts for these things can easily be found on ebay

Is it possible to put a bigger motor on it without crazy fabrication

@tatemushroom1002

Жыл бұрын

Maybe a ghost 212, but the stock 200 already can go 70mph.

@jake-gd8rb

Жыл бұрын

@@tatemushroom1002 nice can they still be bought where you got that one??? Appreciate the responce

so you dont have any plm with your bike huh ?

do you have this bike and if so do you want to sell

@micky5987

7 жыл бұрын

No I do not sell the bike thanks

@micky5987

7 жыл бұрын

No thanks do not sell the bike

You wanna sell it.

It sounds weirde

I want the engine on a bicycle

Worlds worst video! Ride the damn thing!

@PrideSage99

4 жыл бұрын

No where in the title does the man say or imply he is going to ride it in the video. Be happy you got a good start-up sound clip.