This is the way tutorial videos should be done. Great Job! Thank you.

@coilsandcoinsdetecting

Жыл бұрын

Thanks Ronald. Appreciate the comment, and I hope to do a few more videos like this over the coming week & months.

Your videos are my #1 go to source for common sense tips of the hobby and learning the 800. Many thanx for all the time you put into this.

@coilsandcoinsdetecting

Жыл бұрын

I really appreciate that Walter! So happy to hear you’re finding useful info in these videos.

One year later and this information is still excellent for both new users as well as experienced one's. Thank you ! 👍👍👍

@coilsandcoinsdetecting

4 ай бұрын

Glad it was helpful! Thanks for watching!

Every time I watch your tutorials I learn so much. Thank You they are great 👍

@coilsandcoinsdetecting

Жыл бұрын

Happy to hear you’re finding the videos useful. Thanks for your comment Doogs.

Another great video! Yes on the bottle caps ringing 22 here in the US as well. They can be quite maddening at times!

@coilsandcoinsdetecting

Жыл бұрын

They’re definitely one of the more annoying targets here in Australia, as our $1 coin is also a solid 22 on the Equinox.

Another great video, again it's clear to follow. No BS. I learn so much from these tutorials. I love them. Keep up your great vids. As a Nox 800 owner in my first year of the hobby I learn so much each time. Thank you for your time.

@coilsandcoinsdetecting

Жыл бұрын

Thanks Marty - really happy to hear the video is useful. Here’s to finding some awesome treasures!

@martyparcon3664

Жыл бұрын

I've been killing it on the beach. But with your tutorials I'm going to try more parks this summer.

@dregerbilivanshvili-ts2yi

11 ай бұрын

Do you start with Equinox directly?

one of the better instructional videos out there . Thanks mate.

@coilsandcoinsdetecting

9 ай бұрын

Thanks for watching!

Good video mate. Learnt some things. Am still a dig it kind of person though. You never know, cheers.

@coilsandcoinsdetecting

3 ай бұрын

Thanks for watching!

Outstanding information. Many thanks.

@coilsandcoinsdetecting

4 ай бұрын

Glad it was helpful! Thanks for watching!

Just bought an equinox and this is a very helpful video. Thank you

@coilsandcoinsdetecting

3 ай бұрын

Glad it was helpful! Thanks for watching!

One of the better instructional vids. New to detecting and just acquired an Equinox 800 and Garrett Carrot. Some great info.

@coilsandcoinsdetecting

7 ай бұрын

Thanks for watching. Good luck out there!

Thanks for the fine instruction. Very clear and methodical.

@coilsandcoinsdetecting

8 ай бұрын

Thanks very much for watching! I’m glad it was helpful.

Great video! Again I really like your camera view that lets me see the coil movement as well as the screen.

@coilsandcoinsdetecting

Жыл бұрын

Thanks for your kind words. Hopefully there’s something useful in this video for you to take out into the field!

Brilliant Steve. Super helpful.

@coilsandcoinsdetecting

Жыл бұрын

Thanks for your comment. Happy to hear you found the video useful.

Great video. I have been digging everything, so I find everything. I am getting tired of digging everything so this video has made me realize that I should trust the detector a little more. Solid hits, the depth idea, great stuff, I will try your methods today! Wish me luck!!

@coilsandcoinsdetecting

Жыл бұрын

Happy to hear you found the video useful! With lots of practice you will be able to tell the difference most of the time, but if you’re in doubt still dig it!

thanks for the video. I'm new and overwhelmed with signals with my equinox 900. That will all surely help

@coilsandcoinsdetecting

Жыл бұрын

Thanks for watching. Although the target ID numbers have changed with the 900 (0-99), I’m sure the same theories will work - particularly the size test by lifting the coil into the air slightly. Happy Hunting!

I see you are hunting in Multi-IQ mode. I suggest you check that neutral 16-17 on a single frequency. Usually, aluminum pull tabs once they drop a couple of inches into the soil will give a jumpy VDI from 20-29 while Multi-IQ will show a 16-17. If both modes are similar then it is worth the dig. If you learn how the different targets react with different frequencies you are going to become more proficient. Since Minelab gives you this feature why not use it?

@coilsandcoinsdetecting

Жыл бұрын

Thanks for your comment Dan - it’s an interesting point you make. I’ve used this single frequency test before on 15KHz, 20KHz and 40KHz many times, however I’ve found it to be inconclusive in most cases. Perhaps I need to use it more consistently in order to understand it better. I’ve tried burying known targets such as aluminium pull tabs and ring pulls in an attempt to learn to tell them apart from a 20c piece, however I couldn’t rely on any one test, or collection of tests (including the single frequency test). It’s a work in progress…

@danblankenship5744

Жыл бұрын

I should have mentioned that 4Khz is my go-to single frequency and all that I hunt in. The only other single frequency I will check is 40Khz f I suspect a small gold chain. Try this, next hunt do your normal hunt and just before you dig switch to 4Khz and take note of the response. If it is trash it will likely give you a simple and clear warning by not agreeing with the Multi-IQ response. I have mine set to 50 tones with all ferrous numbers active, but I have set the volume low enough to only give a background grunt. I want to hear this iron so I can justify those pesky false signals that will likely occur. The only VDI numbers I have deleted are those above 36 since these high-piercing tones are nothing but iron that wrapped around from beneath VD! 0. If I want to hear these high VDI numbers then I hit "All Metal". Or I can switch to 5-Tones and make these high VDI numbers (37-40) their own region with the volume lowered and the tone a lower number.

@coilsandcoinsdetecting

Жыл бұрын

Very interesting. I will most definitely try your suggestion of 4Khz as a target check. Your setup is quite unique, and I’m very interested in giving this a try. Thanks again for taking the time to share your experience!

Excellent content, thank you so much!

@coilsandcoinsdetecting

5 ай бұрын

Thanks for watching!

GREAT VIDEO TNKS👌

@coilsandcoinsdetecting

Ай бұрын

Thanks for watching!

Very helpful thankyou

@coilsandcoinsdetecting

5 ай бұрын

Glad it was helpful! Thanks for watching!

Great video I learned a lot thank you

@coilsandcoinsdetecting

Жыл бұрын

Glad it was helpful!

Cheers for your videos !

@coilsandcoinsdetecting

Жыл бұрын

Glad you like them!

great video.....subbed

@coilsandcoinsdetecting

6 ай бұрын

Awesome, thank you!

If you listen to sound on the pull tab,its lower tone and the coin is higher...but same number!

Just getting started with a 900. What settings will go the deepest?

Bottle caps and pull tabs ring 18-23 for me all the time. If any company can figure that out they'd be rich.

@coilsandcoinsdetecting

Жыл бұрын

Yes, it’s the bane of every detectorist!

Will the TIDs be the same numbers on the nox 700?

@coilsandcoinsdetecting

18 күн бұрын

The Equinox 700 & 900 have a TID range from 0-100 I think, so unfortunately these numbers don’t line up with that machine. If it’s helpful, 16 on the 800 is around 40 on the 800/900.

What version you run? 2v or 3v?

@coilsandcoinsdetecting

Жыл бұрын

V3

The piece at 16th minute,with correct settings,must be detected from 15"' with absolutely discrimination!This is not professional detection with potential device,like Equinox, sorry.

@coilsandcoinsdetecting

11 ай бұрын

I do t understand what you’re trying to say sorry.

It doesn't matter, dig everything period

@cocochino21

17 күн бұрын

I wish I could but sometimes I get the signal but can’t tell where to dig 😭