As an electrician, the way he fed and pushed the fish tape through the raceway is almost too hard to watch

@lowoctane

5 жыл бұрын

I jumped in to the comments 😂 as soon as I finished grimacing at that fishing hahaha absolutely painful my friend

@Isoguitar

5 жыл бұрын

Man it was so rough to watch that..lol

@topflight408

5 жыл бұрын

I read your comment before seeing that far into the video and thought you were just another troll complaining. Then I saw him do it. Wow that was absolutely cringe worthy

@lowoctane

5 жыл бұрын

@@topflight408 looooooll

@thefadedfisherman5548

5 жыл бұрын

Glad im not the only one

Vince..... if you hold the black handle and just feed the fish tape.... goes a hell of a lot quicker

@VCGConstruction

5 жыл бұрын

Thanks Anthony

@richpaulsen3074

5 жыл бұрын

I was waiting for someone to say it.

@escotomatt

5 жыл бұрын

That's how you get them stuck

Great video. I like the products. But most of all you guys do a great job showing what all products can do or don't do . Keep up the great work. Philly love here.

Would have liked more info on the battery powered fish tape. Good vid though

@ThomasOrdon

5 жыл бұрын

you know for the

I've been waiting for someone to post about this. Awesome man

Great demo of the fish tape! Thank you for getting this video up. Keep up the great work.

@VCGConstruction

5 жыл бұрын

Thanks!!

Been searching for this. Great review!! Definitely getting this for my team

Great video Vince

Would have liked to know more about the power fish tape, 360 bends amazing.

First demo I've seen on the M18 Fish Tape Puller. Thanks !

@VCGConstruction

5 жыл бұрын

Thanks you!

I wish the demonstration had some wire inside the conduit. I'm constantly adding wire to conduit.

@djmidnightwolf

5 жыл бұрын

Ya I was thinking the same thing. Throw a few Cat 5 cables and a few double coax for satellite in there and really test it.

@scottgrafer2222

5 жыл бұрын

I have the flex leader version, I can fish it with 5 #12's already in a 1/2" EMT. After 5 #12's you can't get the leader in. The nonconductive version will only work in 1/2" if there is nothing in the pipe. 3/4" EMT is no problem with either tape.

@urjnlegend

5 жыл бұрын

@@djmidnightwolf they won't do that on camera

@victorholmes842

5 жыл бұрын

Then why wouldn't you just kill all circuits in the conduit pull the ground wire with your new wire as well as a new ground attatched to it, out and your new wires in. No need for a fishtape if there is wire already there.

@smdehn3

5 жыл бұрын

@@victorholmes842 the wiring I do is cat 6 and coax. We usually can't turn off circuits.

I need that fishtape vince love it milwaukee..

If you'r like me. You are probably hating Milwaukee tools right now. All this amazing innovation and tech in their tools and if you'r a tool guy your probably thinking like I am. "Damn I got to get this. For me the Milwaukee obsession began with the M12 - 3/8 drive ratchet. Then I waited for Christmas in March. When I could finally get my hands on their new M-12 Stubby Impact gun. That was it. I was hooked. I went all out after that. With their M12 system. I carry their M12 ratchet, reciprocating saw, jig saw, hammer drill, 1/2 impact gun. All in my rolling tool box at work. I also have a pretty large investment at home in Dewalt XR 20 volt. Heres' the part where I believe maybe, I need an Intervention. I have a double whammy. I am a gadget guy and a tool guy and Milwaukee is kicking some serious ass and I am seriously considering replacing my entire Dewalt tool system and getting the M18 Milwaukee system. ( gotta have it ) I know, I will start a new movement. Like the "Me Too" and "Just Say No" movements. I will get a Tee shirt in Milwaukee red and I will call mine The "Gotta Have It Milwaukee " movement. I used to think more voltage translated to more more power. That's not true. Trust me. I am an industrial maintenance mechanic for a large corporation and the M12 system it's compactness of design and it's light weight. Makes it an amazingly Ideal system to carry in a rolling tool chest . So you don't have to run back to the shop when the need arises for a reciprocating saw ( ie Sawz all , Jig saw. ) The M12 system is a 12 volt system. I know your probably thinking 12 volts is this guy nuts ?. Trust me, the M12 system has certainly disproved my old school of thought on Voltage = power. Only one question I have to ask Milwaukee after I start replacing my Dewalt tools. How many Milwaukee replacement tools are required to be purchased before Milwaukee will supply a free divorce attorney. ( I am probably going to need one. ) Oh yeah, did I fail to mention. " I hate Milwaukee". lol "Semper FI " Milwaukee

Good job Vince. Nice video lol !!!!!!

Awsome video .. ;) I just ordered the milauwkee 100ft polymer w/ metal tip fish tape ;) really can't wait to get it now .. Thanks

@VCGConstruction

4 жыл бұрын

Hope you enjoy it!

Wow that is powerful! Keep up the great videos

@VCGConstruction

5 жыл бұрын

Thanks MJC!! ❤️❤️

Do you think it would be storing enough to pull 200 ft of 1” poly we’ll line through 3” conduit with some 22s and 45 degree bends

I now refuse to use another fish tape until I have that powered one in my hand... and I'm dragging my apprentice on a pallet with cinder blocks. Amazing product, great video!

@VCGConstruction

5 жыл бұрын

🤣🤣

I've beyond given up on Dewalt whenever my tools die lol. Milwaukee or Makita!

Great vid showing actual use. How easy was it to pull the tape out of the angler power tape? Or did it actually push the tape out?

@VCGConstruction

5 жыл бұрын

Sorry Dusty, I didn’t get a chance to use the angler!

You can’t pull out/push the tape with one hand while holding the handle with the other? In other words, do you have to turn the case to get the tape out?

Those fish tapes look really nice. I'm a little iffy on the power fish tape just because you can't feel if the wires hit something or if the guy on the other end stops because he got a tangle

@cartmanbrah8937

5 жыл бұрын

Perfectly said I was thinking the exact same thing. it's best to go slow cuz the other guy. At the other end could get tangled or his hand can get tangled with the wires it can escalate very bad fast.

@TheElectrican

5 жыл бұрын

If you think about it, its really the same concept as a tugger. Just for smaller wire.

@CesarHernandez-yc9eo

5 жыл бұрын

Does your company not provide radios? Or maybe use your cell phone?

@Morberis

4 жыл бұрын

Very common that I have no cell signal or that the multiple concrete walls will cause issues for radios.

Regarding the electric fish shaped the only thing I do wish is that it had a setting for what gauge wire or you know what you could pull on it foot pounds before I stretched it or broke it does it have a safety to where it doesn't snap the wire hundred feet down the pipe

what happens the end breaks off , how do you connect the wire

Vince you did it again gotta go to the bank and pre order it when it comes out. As always great video

@VCGConstruction

5 жыл бұрын

If the tools make you money then it’s well invested!!

@theone4412

5 жыл бұрын

Well said couldn’t said it any better thank you

Those are pretty awesome

Pretty awesome fish tape. But I wish the Milwaukee guys would have showed you how to unspool it the right way while pushing it.

@smdehn3

5 жыл бұрын

It hurt my eyes to watch too. Lol.

Anything to run conduit inside a wall without breaking the dry wall?

Well done 👍

I’m not en electrician, I have a drain cleaning business, I could on occasion use this...I do sometimes use the hand crank ones when I need to fish something out of a sewer line... sometimes tree roots will fall off the cable after cutting them loose, then you have to try snagging them again or pushing out into the city line..... occasionally they are just too big and you have to keep going in with the cable .. it can be a pain in the ass....a fish tape with a treble hook sometimes will work,, also if you have a ton of wet wipes a fish tape and hook are faster... but that’s a lot of money for use maybe once a year

@VCGConstruction

5 жыл бұрын

Good feedback Robert!!

I am very impressed normally a non conductive fish tape would be a real pain. Thanks guys you are the best

@VCGConstruction

5 жыл бұрын

Thanks Kyle!!

How does it do with flex ? Emt is smooth inside

Absolutely need these vids! Actually doing the thing start to finish!

Does it have a remote on and off to pull alone?

Are those fish tapes already available? If not, when will they be?

wow it is amazing only electrician know how difficult is that thanks i wanna one like this

That’s a cool piece of tool

@vcg construction have you ever use greatlakes power tools im just trying to see if they are legit thanks in advance!!

CONGRATS TO VCG ON 89,000 SUBSCRIBERS !!! 👍👍

Why about if there is wire already in the conduit and ya had to add another circuit? How well will the tape work?

@VCGConstruction

5 жыл бұрын

Good question

I bought a Milwaukee tape today!!! 🤗

Where was this? At a convention maybe? Interested as I am an Electrical Company and want to go experiment for myself.

Someone show that man how to properly pull fish tape out of the roll!! On the power pull only issue I would be afraid of is when I hit a snag pulling a long run sometimes it has an issue that requires attention on the other end, this beast would just rip the wire apart, right?

Nice tools

Well still Its steal pipes, so smooth and easy to pull , I would like to see you do that with the pipes we use in Norway .

@rustimack

4 жыл бұрын

What kinda pipes do you use?

I'm sure this will help me a lot in my work I can not wait to get it .... Watch from Iraq

@VCGConstruction

5 жыл бұрын

What type of work do you do?

@husseinhussein142

5 жыл бұрын

I am an electrician VCG Construction

Fyi when pushing fish tape hold it by the handle with one hand and as you feed it with the other hand it will unwind as you feed it

@VCGConstruction

5 жыл бұрын

Awesome thanks!!

@bradswensen117

5 жыл бұрын

Was going to say the same thing. Your doing alot of extra work :)

@SupperDadder

5 жыл бұрын

Was searching for someone to comment this. Can tell you dont do this for a living but the function of how it works was demonstrated

@lilcourtny08

5 жыл бұрын

@@SupperDadder who cares

And this is why I love the air compressor, jetline, and rat combo

Makita needs to pick up their game as Milwaukee is coming out with better suited tools. Might have to start changing my collection over.

@rustimack

4 жыл бұрын

Starting to? It's been this way for years now. I don't even look at battery tools that aren't Milwaukee. The other companies would have some serious catching up to do if they ever wanted to compete.

Lol the commentary is dank af

Whats the warranty on the fish tapes?

No information available on the powered fishtape anywhere. More info would be great id definitely pre-order this tool.

@VCGConstruction

5 жыл бұрын

We’ll see what we can do!

@Thundercube_Music

5 жыл бұрын

Definitely need more info on the motorized fish tape! Gonna be doing a lot more conduit work and I can see this being super handy.

I want to see it go through a 150 ft run with 540 degrees of bends and cheated couplings every 10 feet

@saul1919

5 жыл бұрын

🤔🤔🤔🤣🤣🤣🤣 what kind of run is that

@dereksmith8177

5 жыл бұрын

@@saul1919 Have you ever worked a commercial construction job? I'm a local 134 electrician in chicago and I've pulled wire through 3/8 whips to 5 Inch GRC I'd say 80 percent of runs have more than 360 bends between J boxes and you can almost certainly count on at least one cheated coup or conn

@Morberis

4 жыл бұрын

@@dereksmith8177 100% agree Derek. I'm up here in Canada and can get similar issues. Not usually that much bend but definately cheated couplings or the pipe is full. Or they decided to substitute black irrigation hose for PVC or DB2 pipe in places that you can't see it. The test they showed here was easy. Any fish tape especially when new should do this.

Dude just hold the handle on the fish tape when you unwind it..

@VCGConstruction

5 жыл бұрын

That fishtape is awesome, it still made it through 360 degrees of bends and 90ft of pipe

@tgraham360

5 жыл бұрын

It's almost like he's never used a fishtape for a living.

That was hard to watch. Shouldn't there be some sort of handle on the casing to spin the reel??

I'm still really jealous. Love thoes expressions Vince makes, dang haters

@VCGConstruction

5 жыл бұрын

Thanks Josh 🤣🤣

Did they give a price and release date for that m18 fish tape puller?

@VCGConstruction

5 жыл бұрын

Release dates are in this video New Milwaukee Tools Announced At #NPS19 Won't Be Available Until.. kzread.info/dash/bejne/c6Nhpcx-p9jedbw.html

When will this be available???????????????????????????????????????

Now if we could only have an indicator that let us know when it exited the pipe, this would be the ultimate fish tape

@rustimack

4 жыл бұрын

We call that an apprentice where I'm from

Yes! Yes! Yes! Milwaukee is stra8 killin it

I would add a detachable wind up knob on the hand held fish. Winding up a 100' fish seems to take forever.

I went fishing today... I was at work and it took me 3 hours to reel her in..

thats pretty nice id like to see it go in pvc pipe .i find pvc has more drag then metal pipe

That doesn’t go through most EMT…we rarely use that snake…unless it’s 2”+ PVC. It works real nice and it’s very sturdy but the TIP is like 10” too long.

New Milwaukee tool cart at 02:35 ? Or just a cart with a Milwaukee sticker?

@twinturbobeerus1412

5 жыл бұрын

Seen one at home depot not long ago.

I do not know why, but it bugged the hell out of me that he didn't hold the handle and pull the tape out as he was feeding in. Like the video and Milwaukee Tools.

what is that electrical power fishing tape called

@VCGConstruction

5 жыл бұрын

angler fish tape

Where the 3/4 pvc underground pipe with wather test ?

I need it to go through grey 1” PVC conduit for swimming pool lights. I can’t get anything but meatal fishtapes past like 60’

@lilcourtny08

5 жыл бұрын

Make a rat and use a good vacuum.

@victorholmes842

5 жыл бұрын

It's prob cause of the water in the conduit. I don't recommend it but one way I've done it before is the buy a new steel refill and cut off enough so that you have enough on either end and Chuck it up in a drill make sure if your not using a leader to make a decent size head and plenty of yellow77

Well that’s cool!

First and great video

@VCGConstruction

5 жыл бұрын

Thanks Gianni !!

Yo show the electric fish tape

Obviously not an electrician.. at 5:00 that's not how you pull a fishtape out... you hold the handle and pull out the tape. Backward winding causes binds.

@VCGConstruction

5 жыл бұрын

It’s one superb fishtape, no binding at all, thanks for watching!!

Milwaukee is showing Klein how to make tools.

Good job on feeding that fish tape in😂

That’s a nice shirt

@VCGConstruction

5 жыл бұрын

Thanks Luis I appreciate it!

What's the price on that power tape?

@VCGConstruction

5 жыл бұрын

I don’t know the price yet sorry

Forget a fish tape puller give me a fish tape feeder. Now that would be awesome

@rustimack

4 жыл бұрын

It does feed

I'd trust Milwaukee any day! Their tools get the job done

Here's an idea... put a little nub handle on the red part and reeling it back in will be a lot easier... 👍 Just give me 10k for the thought. 😂

It would have been easier if you just held the handle and pulled the fish tape out instead of rolling it out. If that was a steel tape it would have been all screwed up on the inside.

You could have pulled the fishtape out instead of spinning it to make it comes out

Did you mean: "very cool guys, like Adam over here."

@VCGConstruction

5 жыл бұрын

👍🏻

Was anyone else kind of hoping for it To pop out and poke him in the eye for the way he was feeding that fish tape..

I bet those fish tapes don’t push too well in any pipe larger than 1”

@rustimack

4 жыл бұрын

Why?

You feeding that fish tape the hard way brotha.

@VCGConstruction

4 жыл бұрын

👍🏻

once i saw him fish i hopped right to the comments, wtf hold the handle dude.

Vince best

@VCGConstruction

5 жыл бұрын

Thanks Gorniol I appreciate it!

So much hate in the comments. Not everyone is an electrician by trade. That’s how you roll it up not completely unreasonable that it would come out the same way. The guy demonstrating could have let a brotha know though

@VCGConstruction

5 жыл бұрын

Thanks Lester!

Has option to use the electric fish tape : uses basic one instead

OMG now your making videos of you going fishing LOL

Come on bud... always pull from a fish tape and use the handle and body to wind it back up.

"I will say this"...

Vince your perfect men

Buddies forearms have never burned so much in his life. That was tough to watch. And people wonder why electricians charge so much

The point of a nonconductive fish tape is to fish through pipes that already have live wires in them. I think this demo missed that very important point.

ASMR. Lol. 89k also

@VCGConstruction

5 жыл бұрын

Thanks Dan the man solderholm!!

Lmao I worry about someones wire getting stuck and ripping an entire wall out

@VCGConstruction

5 жыл бұрын

That would not be good

@djmidnightwolf

5 жыл бұрын

Funny to say that because I had to go to an auto parts store to buy something so I could cut my fish tape off because it latched onto a wire while feeding

89k

Not really a realistic run in my opinion maybe on new construction but not Existing 5 18-2s or 18-4s in a 3/8 peace of emt then see if the Polly makes it lol