Always nice to see a real world packout.

@lowvoltagedude7837

2 жыл бұрын

🍻🙏

Now THIS looks like a Packout that actually gets used.

As a remodeling contractor I truly appreciate organization. Less time looking for stuff is more time being productive. I’m looking forward to watching the KZread evolution of your Packout. I have to say a sparky with a dust pan & a broom… I feel as though I just saw a unicorn.

@mihailblues200

2 жыл бұрын

lmao it's for the truck 100%

@ZaftDima

8 ай бұрын

Совок и щётка это хороший показатель для клиента когда ты уходишь и после тебя чисто!

Quite an impressive array of tools!! It's really what the modern technician needs in this day of diverse field conditions! Thank you for posting this!!

Very well done. I thought I was the only one that saw the need for more small pouches in these rolling tool boxes. Not everybody uses nothing but large power tools. None of the soft sided rolling tool bags have enough pockets either. I’ve done similar mods to a Husky rolling bag, added 2 full rows of pockets for all the small hand tools I carry. I only carry a cordless drill…the rest is hand tools and my kit bends the beams at around 70 lbs. thanks for sharing.

I absolutely love this. I’ve seen a lot of tool set ups but by far, this is my favorite. You set up is exactly what I want. I love using the Tough Built system along with my mobile tool boxes. But you have some amazing ideas to further my set up. Thanks for posting this.

The brush and dust pan. 👍🏽 The Crocs too! Haha. Never seen a pair with white soles before.

Nicely done! Very dialed setup! Let’s hear about all the pieces and evolution!

good to see someone doing a breakdown of a box and looks like they actually using their tools lol cheers

Nice!!!!! Always love seeing other peoples setup for low volt!

These boxes are awesome but it get ridiculous stacking boxes when you can do something like this, love it.

I love what you did with the interior!

I appreciate the look at the mods you have made. I really like the piece of 1x4 or 1x6 that you have inside the box as a divider. I never thought about drilling holes for screwdrivers to sit in the divider like that. Everybody has seen holes drilled in wood for screwdrivers but I've never seen it with the holes in that sort of orientation. Very smart sir. Also the only difference in my setup is that I prefer to not have stuff on the outside of the cases. It is just one more thing to worry about like tools falling off or someone stealing something on the outside. And also because it is heavy and hard enough to get the packout in the truck as it is. Stuff hanging all around it I image would take much more effort. But that is just my opinion and what I like in my packout. Overall great video and thanks for the share

holy .. whole world inside this packout .... great job !!

I bought a few of those red husky’s bucket boss and lined my box it was quick and easy

This is a man going to work! Bravo mate. That shit rocks.

For the inner front pockets you screwed on, I did this a while back using heavy duty adhesive velcro strips, has worked very well so far, without needing to put holes in the front.

That is awesome😱😱🤯🤯 Never thought to add pouches to the outside of the box

Nice job setting up & organizing for your needs.

Love the cliptech packout combo. I'm a plumber / heating specialist and I have 2 big and 3 small draws plus my cliptech stuff and it's so efficient. Massive time safer.

really nice set up my friend absolutely love it!congrats!!my favorite part is Capsule Corp sticker

@lowvoltagedude7837

2 жыл бұрын

🍻 yes sir 🙏 thank you buddy

Top tier build! Very well thought out and honestly can say best build I’ve seen!! It’s been a year now, have you made any changes? If so please upload a update!!!

That is one of the nicest modded rolling boxes I’ve seen.

@lowvoltagedude7837

2 жыл бұрын

Thank you 🙏🍻

Love it! It's got a bit of a Mad Max vibe, but all those exterior pouches look really handy. 👍👍

@lowvoltagedude7837

2 жыл бұрын

Like the mad max reference 🍻🙏

That’s a badass set up

That took a lot time and thinking I’m really impressed

Ayyyeee I remember you! How neat that KZread told me of your next vid. Inspiring me as a mechanic and handyman. Wishing you good health to you and loved ones.

@lowvoltagedude7837

2 жыл бұрын

Thank you my friend 🙏 I wish you the same

Nice job dude , like your thinking

Nice packout system, what did it for me was the Capsule Corp. stickers

@lowvoltagedude7837

8 ай бұрын

🤜🍻🤛

Very cool solutions you found! in Brazil we call it "gambiarra" or technical adaptation without technique lol!

Innovator I see just like me, :) I got some new ideas from this video thanks my friend

Simple and useful ideas!

Nice Job LVD !

Absolutely genius. If i seen this on a job site id ask for ur autograph

Very good idea 💡 I will try to do something similar.

Lots o stuff…must do a multitude of this n that for a living. Nice

@lowvoltagedude7837

2 жыл бұрын

I do like branching out and gaining new skills. over the years it's been a journey growing and learning for sure 🍻🍻🍻

Clean how you did the screw driver on top 💯

Awesome dude!

Excellent job

Hell yeah!!! Capsule Corp!!!

You have a dope set up!

@lowvoltagedude7837

2 жыл бұрын

Thanks buddy 🍻 reach out when you can and let's catch up👍👍

This is sweet man

I love it bro 🤘🤘

Great Idea

Organized and pride in your work .., bravo

Just seen this, and im also using the milwaukee and tough built here in the uk. Only difference is my milwaukee is black and i dont have no where near the amount of tough built parts. Nice idea with the clips on the back. All the best, and great setup 👌

@lowvoltagedude7837

2 жыл бұрын

I do like that blacked out version 🍻 I used metal zip ties on mine to hold the toughbuilt clips on the back bar.

@adammorrison3383

2 жыл бұрын

I might have to travel over the black pack out looks so much better than the red

Wow I really like the organization! Where did you get the pockets for your tools on the inside of the box and what is the dimensions of a piece of wood that you placed in the center of the box I really like that idea and also where did you purchase the screwdriver Holder that’s mounted on the lid?

His pack out makes mine shrivel up.

Could you possibly add links to the parts used like pouches, clips etc to make it a bit easier to find? Ingenious buildouts 👍

I also use the tough built clip awesome Sauce

@lowvoltagedude7837

2 жыл бұрын

If you can dream it you can do it 🍻 thanks my toughbuilt brother🍻🍻🍻🍻

Love it. Subscribed. It would be great to hear you talk about where you actually screwed/drilled into the box and where you didn’t need to. My box is coming soon and would like to minimize any opportunity for water to intrude. Do you use the top for any packout attachments? Thinking of 3D printed feet to Mount other things to the top.

@lowvoltagedude7837

2 жыл бұрын

Will be doing a more detailed video soon.

Very nice

Nice

Bro where did you get the mounting plate for the toughbuilt puches?

Nice!

@lowvoltagedude7837

2 жыл бұрын

Thanks brother 🙏🍻🍻🍻🍻

Very nice setup, but do you need everything everytime?... I got a similar setup butt only take the basic and the nessecery for the job.

Лучший вариант из тех что я видел. Многое из того что у вас теперь сделаю у себя . Спасибо большое.

heaviest pack out known to man lol, also the most practical

@postsniper-7532

6 ай бұрын

As long as it’s on wheels who cares

Wow that's a lot of pouches. Interestingly I just added apiece of aluminium inside like your wood piece to keep things upright in my Hart stack. What pouch is the one inside the front? I guess the rear one is the same. I'm just trying to figure out how to keep the tools more upright to make them easier to find as well. I do have something you forgot. I added a drink holder on one side. Just gotta have water with you.

This is perfect I am going to do somthing similar

@lowvoltagedude7837

Жыл бұрын

Good luck with your box

What kind of pouches are you using to line the inside of the box with?

Which Cliptech pouches did you borrow from to use the cliptech device from & what type of rivets did you use to mount the other brand pouches to??

I want to do something vary similar. What did you use to hold your hand tools on the inside?

How did you get the clip tech female ends? I want to make a Kline bag similar to yours but I can’t find just the clips anywhere

I don't know what any of that shit is or how to use it...but it looks fuckin' awesome in that case...nice kit! 👍

Please let me know what holder you use for your screwdrivers:)

The one thing pack out systems suck at is tool access on the job. You've gone a long way to address that. If you take a small table to set this on it'll save a helluva lotta bending over during a day's work. Nice job

thats bad ass

overkill!!!

Great mod. Very practical. Youre a one man army? part of a team or you have employees?

Damm bro, that is some serious organizational system you going on. I never thought of utilizing the outside as much as you have. Well done! One question though, when you are rolling your box do the bags on the wheel side drag or touch the ground?

@lowvoltagedude7837

2 жыл бұрын

I have been using the toughbuilt ones with no issues on the back even going up stairs is not an issue but I just added the Hilti and supply bags so I haven't tried that with stairs yet. If it does catch the Hilti and zipper bags I just gotta cut the zip ties and figure something else out. My advice is start with things you know will work and make adjustments till it's dialed in.

@zjedinite

2 жыл бұрын

@@lowvoltagedude7837 No touchy touchy upstairs!? Damm that wasn’t expected. Well if that is not a set up, I don’t know what is 🤙🏽🤙🏽🤙🏽

Where did you get those clips for the klein pouches

Legit!

@lowvoltagedude7837

7 ай бұрын

🤜🍻🤛

Kinda over kill but I see a few ideas I wanna try haha cool video!

@turtleweed1050

7 ай бұрын

Really digging inside the box

I like your video ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

I found the electrician other then myself that carry a small brush and dust pan. Lol

@lowvoltagedude7837

2 жыл бұрын

Right who needs a vacuum when I can almost get all of it with a dust pan and brush 🤣🤣🤣🤣 it's really nice having it for simple quick clean ups and no noise is a plus.

Wow

Hi. What is the exact name of the green screwdriver holder? Thanks

What's that triangular grey object with bristles on the right hand side outside of the box? I'm an Electrician and I've never seen such a tool, what is it used for? 🤔

Esto si es ahorro de espacio y dinero, cuando coloques otro cajón apilado se despejará un poco ese 😊

Bro what brand of pouches are on the inside ?

How heavy is it when it is fully loaded?

Never is enough tools i to my wide 😀

Impressive, but the issue I see is with the durability of the box itself. It's been highly customized so when part of it fails, whether due to wear and tear or weak spots because of holes drilled, weight etc., it will be a major process to customize another box.

@lowvoltagedude7837

2 жыл бұрын

It's been a little under 3 years with no problems so far 🤞I hope I get another 3 years🙏 🍻

@deadliftD

2 жыл бұрын

@@lowvoltagedude7837 I bought their larger Pack Out tote for around the house and for when I do work at my rentals. It's superior to anything DeWalt or other brands offer given its larger size and number of pockets. However, I actually prefer the DeWalt Toughsystem boxes over the Milwaukee. Personal preference I guess. And for large amounts of screws, nails, plumbing fittings etc. I think the $30 Ridgid organizers are the best.

@LemonySnicket-EUC

2 жыл бұрын

Don't overthink it Dan 😎 Just do it. Nothing in life is permanent. Make the best of it now and enjoy it.

@zjedinite

2 жыл бұрын

@@LemonySnicket-EUC when you start living life the way your comment goes towards that tool box life becomes easier. I, as an OCD individual strive to do as such everyday. Not successfully, but I try! I’m not sure if you realize how deeply profound your comment is. Side note lol If you looking for the strongest and cheapest pack out system nothing beats Rigid for the buck$!!!

@LemonySnicket-EUC

2 жыл бұрын

@@zjedinite I'm right with you Larry ! I'm a bit OCD and perfectionist. I've learned that both are a disease if you will. My moto is progress over perfection. Often, We can talk ourselves out of so many things and sometimes even excuses get in the way. Also, well begun is half done is one in my brain as a mantra. Just go get started, the rest falls into place. Thanks for the reply Larry. Enjoy life man.

Where you get the tool bad tote?

My brain hurts thinking about how heavy this thing is

👍

Where did you get the cliptech attachment for the klein canvas bag?

@lowvoltagedude7837

2 жыл бұрын

I removed it from a toughbuilt pouch and used it on my Klein 🍻

A tool box with tools in it. What’s the big fuzz?

Great box. But don’t tip it upside down! 😊

Where did you find the canvas tool holders you have mounted inside front and back?

@LemonySnicket-EUC

2 жыл бұрын

I used bucket boss organizers and cut them in half and separated the inside from the outside portion. Hope that makes sense.

@medialva

2 жыл бұрын

@@LemonySnicket-EUC the comment I’ve been looking for. Thanks man

Where did you get those screwdriver holders??? what are they called?

@lowvoltagedude7837

Жыл бұрын

Wiha 1000v slim set. Got them on amazon

How much does it weigh with everything?

@OEM19

2 жыл бұрын

I’m curious about this as well. Can you lift it fairly easily to load into a truck?

Why no comments about the Dragonball sticker 🤔

Which one of those magnetic stud finder’s do you prefer?

@lowvoltagedude7837

2 жыл бұрын

Be honest they all do the same thing. The stud buddy is very slim and compact and I can't remember the name of the other one but it's a little bulkier and then

@lowvoltagedude7837

2 жыл бұрын

Nadium 52 magnet that I purchased from Amazon. I just wrap it up in a microfiber cloth and zip tie. It off is probably my favorite because it's probably the strongest magnet that I have, but in all they all are great

@lowvoltagedude7837

2 жыл бұрын

I do like having all of them because I can put them on the wall and mark out all my studs. If I ever need to be certain of the center of a stud, I usually pull out my Franklin that is kind of a bigger tool. I to use the magnets most of the time.

Hello sir

Great organisation !!, but how do you lift it out of your work truck ?

@lowvoltagedude7837

2 жыл бұрын

Gravity helps in taking it out 🤣🤣🤣 it's something I do it everyday some how 🤔

@bozart6001

2 жыл бұрын

I was just thinking the same thing

Think you should be an engineer.

@lowvoltagedude7837

2 жыл бұрын

Thank you buddy 🍻🙏

Be rough to pick up and put in truck lol

I did something like that .. On a Ridge tool box. I put inside that kind of bag that we put inside a bucket.. I cut it in half and glue with loctite glue.. Very strong .. And good on fabric.. Iam a apprentice electric.. Now i don't have to dig to find any tools