It sounded excellent, and welding is my day job!

@BakersGas

3 жыл бұрын

Thanks! We love this machine. Might be our favorite MIG machine.

I bought the 252 over the 255 solely because of the screen i do not trust I won’t break it. I learned on the 252 and it is a solid machine but the pulsed mig was tempting.

Thanks for the vids, picking up my Multimatic 255 and Dynasty 400 units next week.

@marloflores8325

3 жыл бұрын

How are you liking the multimatic 255

@gulfmaster4189

3 жыл бұрын

@@marloflores8325 Didn’t get a chance to test the unit yet.

@SquareBodyK5

2 ай бұрын

​How is the 255 holding up?

Is this welder better than esab 235 mig welder?

Another thing... dince connectors are small may consider it more big one 5/8.. if you running a long welds may destroy positive connector. I got experience at 211 miller at also 200 miller multimatic...mm

Can it hold a 33lb roll of wire ?

NICE, let's see some aluminum uphill 1/4" - 3/8" 3g. Thanks

I’m pretty new to this but I was wondering if you can hook up a push pull gun to this for welding aluminum. Thank you for the videos.

@BakersGas

5 жыл бұрын

Yes you can you can check out the option on the spec sheet below: www.bakersgas.com/media/docs/MillerSpecSheets/MIL907734-specs.pdf

Tossed up between the 252 and 255 millermatic , I’d rather use separate machine for tig etc .

I’m an aluminum shipyard welder who has used the xmt with spoolomatic 30a and optima box which is essential for changing voltage in the hole. Miller rep says in auto pulse heat and wire auto adjust by turning wire sped knob on spoolgun. This would be great if it works that slick. ...... Is this a soilid replacement for xmt? Thanks

@BakersGas

3 жыл бұрын

We had Andrew call you hopefully he was able to clarify for you! Thanks for watching let us know if you need a quote.

Can you make a comparison betwen Fronius Transsteel 2200 and Millermatic 255 ?

@BakersGas

3 жыл бұрын

They are different, the Miller 255 is certainly more user friendly and serviceable. If you want a quote on both email or call us.

Looks like a nice machine for heavier duty MIG welding (my 220 maxes out at 3/8” supposedly at a lower duty cycle, and no pulsed MIG.)

@imbrandon16

5 жыл бұрын

I was going to go for the 220 for the ac, but it has a lower duty cycle across the board so I think I'm gonna get the multimatic 255, and then just get an everlast ac/DC tig box later down the line...

@weldingjunkie

5 жыл бұрын

Sheep Dog69 plus this goes to 350 amps. I have this and a dynasty 280dx

@rays9033

Жыл бұрын

@@imbrandon16 I am thinking the same as had. Did you get the 255, if so, do you like it?

@imbrandon16

Жыл бұрын

@@rays9033 I did get it, I love that machine, haven’t had any issues with it and it’s easily handled everything I’ve thrown at it. 👍 I actually did end up getting a watercooled everlast 250 ac/dc tig welder last year as well, it’s been great too.

@rays9033

Жыл бұрын

@@imbrandon16 awesome, thank you for the quick response! Sounds like I need to spend some money.

i didnt even hear the fan go on... is it that quiet, or it goes on when the machine gets warm?

@BakersGas

3 жыл бұрын

It is pretty quiet. We are not running it super hard but even when the fan kicks on it is not loud. Thanks for watching!

Awesome plz tell me is it MMA arc function?

@BakersGas

5 жыл бұрын

Manual Metal Arc welding? I suppose what are you trying to do?

Its extremely heavy? Isn't it less than HALF the weight of the 252??

@BakersGas

5 жыл бұрын

Yes it is but 84 pounds is pretty heavy to pick up compared to say a Millermatic 211 which is about 38 pounds. On the 252 with the running gear it is never really picked up and is certainly less portable than this unit. Thanks for watching let us know if you have any other questions.

those burnard guns are really nice but they're freiking HEAVY after a while that thick a$$ cord starts making your arms tired.

@BakersGas

5 жыл бұрын

The 255 is now shipping with the new MDX gun by the way!

I noticed a USB port,,,, Is it there for just charging your phone?

@BakersGas

5 жыл бұрын

The USB port actually is there for any future software updates. Also in some machines I am not sure on this one it allows for a summary of data to to be saved onto a USB. Any other questions let us know! Also Miller just announced the MULTImatic 255 so stay tuned for more info on that! :)

@weldingjunkie

5 жыл бұрын

LOL

wow, alot smaller than the 252, we have 3 in the shop, don't know it that's a good thing because now you gotta buy or build a cart for this to haul your gas cylinder around... 252 has a rack and chain built into the back.

@BakersGas

5 жыл бұрын

They sell it with and without the EZ latch cart. Below is a link to the one with the cart. You can detach it from the cart very easily. Or if you bought the Millermatic 255 by itself you can always add the cart later. It is about $400 I linked that below as well. Thanks for watching! www.bakersgas.com/MIL951766.html www.bakersgas.com/MIL301449.html

@weldingjunkie

5 жыл бұрын

No pulse with the 252 or dc Tig of stick and 50 less amps

@thedillestpickle

2 жыл бұрын

@@weldingjunkie Yea this wasn't covered in the video. I'm looking at an ad that says the 255 can do Mig, stick, Tig, Flux, and aluminum MIG. I'm fairly sure the 252 only does MIG, so this is a huge upgrade in versatility. I wonder if there are performance or duty cycle differences between a transformer based machine vs an inverter based machine.

I see no spool gun used , why is that?

@BakersGas

5 жыл бұрын

We did make another video with the push pull gun see below link: kzread.info/dash/bejne/ao6Axc96Y6i8iJs.html

How do you feel about the price. I'm in the market for a Multi process welder and would really like to get the Miller 255 but damn is it expensive

@BakersGas

5 жыл бұрын

If you are looking for a multiprocess welder you would want to look at the Multimatic 215 and 220. This 255 is a MIG only machine. If you are wanting to AC TIG weld aluminum that would be the 220. Which yes the 220 is at a higher price point but it can do everything. I put a link below to both. Call us if you have any questions we are happy to help. 877-930-5690 www.bakersgas.com/MIL907693.html www.bakersgas.com/MIL907757.html

@imbrandon16

5 жыл бұрын

same here, i'm thining of going with the 220, i'm a young electrician apprentice, but i've been getting into welding lately, and i want my own machine to play with, we have miller 252 migs at work, and and a miller 150 tig/stick box, and an everlast 180 shitbox tig/stick welder which took a shit last week XD r.i.p. green machine, you will probably not be missed, until someone needs to work on some aluminum XD. but for buying my own personal machine i think i'm going to go with the 220, i can then use any process i want, and weld just about anything i would need to and more lol. 3 grand for every process and the ability to weld aluminum. or 2700 for a mig only... and the 220 is 120v/240v. i know the miller 252's at work are 240v only, idk about the 255 so keep that in mind.

@BakersGas

5 жыл бұрын

@@imbrandon16 if you have interest in getting into TIG welding the 220 is the way to go! Also Miller just announced in January they are launching a Multimatic 255 which will be a multiprocess machine. It is linked below for you to check out. Also linked below the spec sheets for all three so you can compare. If you have more specific questions feel free to comment them or call us :) 877-930-5690 Multimatic 255 www.bakersgas.com/MIL907728.html Spec Sheets: Multimatic 255 - www.bakersgas.com/media/docs/MillerSpecSheets/DC129-Multimatic-255-Specs.pdf Millermatic 255- www.bakersgas.com/MIL907734.html Multimatic 220 AC/DC- www.bakersgas.com/MIL907757.html

@BakersGas

5 жыл бұрын

@@imbrandon16 awesome! If you have not already check out our welding review on the 220! kzread.info/dash/bejne/c4uVp9iFe6Tbh5c.html

@weldingjunkie

5 жыл бұрын

This is not bad price for 350 amp machine honestly

Where's the cart????

@BakersGas

3 жыл бұрын

We do have a video that shows the cart and we actually put it together if you want to check that out I will link it below for you: kzread.info/dash/bejne/ipaEsqp-es-_e6Q.html

Spit it out Junior

Actually miller get benards gun... but.. consumables are fuck expensive.. imagine year at welds... mm may used 125miller gun like used 252

Doesn't even prep a fillet weld ...