Great video. Appreciate all your tips. Love that you jot things down in a notebook. I do that as well! :).

you are fab, im currently saving for these hoops. confidence is deffo key Boom. love you. xx

Thank you for your instructional video. I looking to buy the station and the hoops.

When you use the arm hoop, will you make another video? Would love to see how you go about doing that. I have a hard enough time with Christmas stockings

Great Job! Proper preparation provided prosperity!

@adubbproductions

2 жыл бұрын

It never fails. My very first heat press sat on the shelf in the garage for over a year before I actually used it.

Great video. Luv the inspiration and dedication u have

@adubbproductions

2 жыл бұрын

Thank you Sam. Much appreciated. Thanks for watching. 🥇comment.

I love all my mighty hoops and station. I do know the numbers they say works for each shirt for left chest I moved each number down one. So if it says 17 I use 16. I also printed out a sheet and put it at the bottom of the hoop master station. That way it is always with me.

@adubbproductions

2 жыл бұрын

That’s a great idea. Thank you.

Hi you are correct in preparing for now and later because there is nothing like not having what you need when you need it. I have purchased about 1K worth of Mighty hoops when I bought my pr670w. I have the boards and two 5.5 x5.5 hoops. along with many of the larger hoops. Just about ready to buy the 14x14 for my pr1055x. your video is good to share. Retired US Army 100% disabled vet.. I just started doing embroidery at the age of 66. Good video

@adubbproductions

7 ай бұрын

Thank you for your service. Congrats on that 100%. I’m at a 25% and they are not budging, I wish you and your business health and prosperity.

Thank you for the wealth of knowledge you continue to share with us. Do you happen to have a video for the MT2001 and how to set up the might hoop? I have the MT2001 8S I have two hoops a 11x13 and a 13x16 MHoop, my issue is the hoops dont seem to work with the table or without. Any feedback or redirect for a tutorial would be greately appreciated. Thank you

Oh yes value my time. Got to get these hoops. Thanks so much for the video.

@adubbproductions

2 жыл бұрын

No problem. Thanks so much for watching

Good video thanks

Absolutely!

@adubbproductions

2 жыл бұрын

👍🏾👍🏾👍🏾👍🏾

Seeing the video looks easy using the hoop station. I only have the frame and I thought I didn't need the station.

Glad I got to catch this video. Ordered my Hoopmaster yesterday. Thanks for all the videos my man, you've been a great help with so much and for my decision to get a Ricoma and all. Even got to speak with your Rep with Ricoma. Keep up the good work and God bless you buddy.

@adubbproductions

2 жыл бұрын

God bless you as well. Big new money printing toy. Congratulations. What machine did you get?

@austinlunsford420

2 жыл бұрын

@@adubbproductions I wasn't able to get a new machine, but I got a 1501-TC from a lady down in South Carolina. Having some trouble getting tensions right where I cleaned it from all the dust and stuff, but I'm in the process of ordering new springs cause some you can tighten all the way down and their is no resistance. Ricoma said the springs can wear. Any tips on how to file down or get burrs put from the needle plate? I'm ordering one of those too but need to get this one fixed till then

@adubbproductions

2 жыл бұрын

Honestly if something is to the point where it needs to be filed don then i would not deal with it. Just replace those parts to eliminate all variables of things that could go wrong. If something is going wrong while embroidering if you have shaved down parts etc you might not be able to pinpoint the issue properly because all your parts are not in manufacture recommended condition. Replace the parts and go from there. Also, I hope when you purchased it you where able to get a Demonstration and see it embroidering. Best wishes. Let me know how things go. I’m curious. I hope you get it up and running soon.

@austinlunsford420

2 жыл бұрын

@@adubbproductions I've got it up and running now, just run into alot of thread breaks where it looks like the burrs are cutting the string. But also Ive got alot of digitizing to learn cause I think I'm setting my needle jumps too close and friction is getting the strings too. Just gotta keep playing and learning. Best way to learn I guess lol

@apeshitclothing

4 ай бұрын

@@austinlunsford420how's your machine working for you now? Did you get the thread breaks under control? If you're spending a ton of time digitizing your own designs, you should outsource them to digitizers that digitize all day. That way you know all your designs are digitized properly. That way you can have more time working on orders and making that $$$. Remember, time is your most valuable asset.

Man!!! Time is our most valuable asset indeed! I watch EVERYTHING on KZread double speed to save my time lol but I’m not going to lie… I knew how much faster the mighty hoop was but I legit had to go back to regular speed to see how fast things actually were and OMG you’re still blazing compared to the original hoops. Your regular hoop speed made me look like a turtle so I’m definitely going to have to improve.

@adubbproductions

2 жыл бұрын

Hey man. No rush. As long as you have away of hooping you are good. When you business pays for it then upgrade to the mighty hops to save time.

@andreacraig1465

Жыл бұрын

There is a sleeve magnetic hoop that works without opening the seam on a multineedle machine

Woohoo Mightyhoop’s why 2 hoops bc we have 2 heads 😂 Congratulations 🎊 on your new MY2002-8S I agree to get yourself prepared for your future orders. I love my mightyhoop’s. TIME is very valuable you can never get it back. Cant wait for that sleeve video… “Why bc we have 2 heads” thats your next quote for BB couture merch

@adubbproductions

2 жыл бұрын

I’m excited to get things going and crank more product out faster with the two beads and the mighty hoops. Preparing for this Re-session that’s coming. Smh. Let’s see how this goes.

I continue watching and you demonstrated using the hoop with that black shirt without using the hoop master. what? I was impressed.I was having a hard time. What am I doing wrong?

This is amazing bro, lol 😆 I got the five-by-five 2 of them from Mighty Hoop.

@adubbproductions

2 жыл бұрын

I love this 5x5s. They are the truth.

Do you know hoops Like these for single needle Machines? mighty hoops has none :/ Thx for all your Videos ❤️

Hi, I just came across your video. I just received my 1st mighty hoop for my tc-1501 and I am having issues where only one side is clicking into place of the arms. I did call Ricoma and they told me that I have to loosen the screw on the arm that is not clicking in then slide the mighty hoop in. I don't have enough strength to do all that 🙃 Did you run into any issues with your mighty hoops and the mt machine?

Ooo Lawd 😅I guess I need to order some Mighty Hoops before my machine gets here. I don’t want anything stopping me. Trying to watch all your videos to know best deals for threads, etc. I’m getting nervous 😟 now. Do you have a recommended video on all the materials ie attachments etc I should consider?

@adubbproductions

2 жыл бұрын

No and even thigh I don’t think it’s needed I’ll make one. What I suggest to you is to just get your machine and use what came with it to learn. Use the hoops that came with it understand the process. Dial in the settings and get use to its basic functions. Then you can desire what you want to get. But the most important part is for you to use your machine and learn how to work it. Dial in the tension and learn the menu. Learn how to rewind after you get a thread break etc. just learnt what machine before you get to much of the other stuff. The most important part is getting the machine to do what it’s suppose to do. Everything by else makes that process easier. After you use the regular hoop you can really appreciate the simplicity of the night hoops and how much it speeds up your workflow. But, you gotta get that workflow first. Basics then graduate. Basics most important. Congrats on your new machine. This week I’m gonna try to embroider on a timberland boot stay tuned.

I got it

Ricoma is definitely the next level of professionalism . great video thank you for your knowledge bro

@adubbproductions

2 жыл бұрын

No problem. Thanks so much for watching.

Hey man love your vids. Quick question with the mighty loop say you have some creases, with the original hoop I know you slacken the hoop and pull to tighten. What do you do with the mighty loop? Cheers

@adubbproductions

2 жыл бұрын

With the might hoops you lay the material down flat when the top part snaps down you shouldn’t have any creases. If so you disconnect it and try again. When you have a hoopmaster station it gets rid of all of that so you can pretty much hoop your garments perfect everytime.

@smane2129

2 жыл бұрын

@@adubbproductions you are a legend my friend. Watching from the UK. Up until yesterday I never thought of or knew anything about embroidery. Last question promise. Is the hoop master station compatible with your ricoma em 1010?

my hoop 5x5 does not fit on my Ricoma em 1010 ,short hoops, brother ho noooo

Can the 2 or more heads embroidery machines work on independent designs at the same time?

@adubbproductions

2 жыл бұрын

No. You need separate machine for that. The real point of having a machine with multiple heads is for increasing your production quantity so you can make more money by beating able to take larger orders while completing them faster.

“Value your time”..

@adubbproductions

2 жыл бұрын

Yes indeed. Everytime.

100 bro

Does the station come with brackets?

@adubbproductions

Жыл бұрын

I think the station just comes with the station by itself and you can purchase packages with different pieces. Typically the most common package is the station and the 5.5” left chest attachment. Is you purchase larger hoops you wanna get the brackets that attach to the station. Those brackets are not included. You buy everything separately. No add on is really include with anything,

Can mighty hoop work with se625

@adubbproductions

2 жыл бұрын

No. Mighty hoops are for multi needle machines. Might be time for you to upgrade.

Will the 5x5 mighty hoop fit the Ricoma ‘em-1010

@adubbproductions

Жыл бұрын

Yes. You have to specify the machine you are buying it for so they provide the correct brackets.

@carolynsworld6321

Жыл бұрын

@@adubbproductions ok thank you so much I truly appreciate you. Have a great day 😀

Why????? Cuz we got two Headssss!!!!!

@adubbproductions

2 жыл бұрын

You already know. Lol

Big problem and lie about magnetic hoop is about easy hooping! You can not hooping and find the center of design on t-shirt easy . You cant do this! And you special say nothings about this!!!! It so easy centre the non magnetic hoop just nothing, but hard with magnetic!

@adubbproductions

28 күн бұрын

No it’s really easy the find. The same way you find the center in the non magnetic is the same way you find the center on the magnetic. I use the hooping station. Maybe you should try that.