MIG Welding for DIYers: The 5 Things You Need First

Тәжірибелік нұсқаулар және стиль

In this video, Jeff Bonner (aka ​⁠‪@-DIYPRO-‬) shares the essentials to kickstart your journey in MIG welding. Join me in Jeff's well-equipped garage as we explore the five critical components you need for MIG welding. By the end of this video, you'll have a comprehensive understanding of setting up for MIG welding, making your DIY projects more efficient and effective. Be sure to check out Jeff's channel if you want to dive deeper into welding!
🎬 CHECK OUT THESE RELATED VIDEOS! 🎬
• The 5 Pros and 5 Cons of MIG Welding: • Top 5 Advantages To MI...
• I Learned to Weld In 1 Hour: • I Learned to Weld In 1...
• 6 Plumbing Mistakes DIYers Make with Teflon Tape: • 6 Plumbing Mistakes DI...
📦 PRODUCTS IN THIS VIDEO 📦
You can use the product button in the video or check out these links below.
• YesWelder 5 in 1 Welder/Cutter (same one I own and use in this video): geni.us/AN12ePM
• MIG Wire (solid 0.30", 10 lb spool): geni.us/SX69
• MIG Wire (solid 0.30", 2 lb spool): geni.us/1LM3D
• 0.30"/0.35" Contact Tips Pack: geni.us/zGcPIfX
• 125 Cubic Foot 75/25 MIG Gas Tank: geni.us/hSXts
• 80 Cubic Foot 75/25 MIG Gas Tank: geni.us/mj3DBp
• 40 Cubic Foot 75/25 MIG Gas Tank: geni.us/PlLgnv6
• Gas Regulator: geni.us/0BFnBEU
These are affiliate links, which means you pay the same price as always but we make a small commission, which helps out our channel - so thanks!
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍
Become a channel member! Hit the "Join" button or head to / @lrn2diy
Support us on Patreon: / lrn2diy
👕 LRN2DIY SHIRTS, HOODIES & MORE 👚
lrn2diy-shop.fourthwall.com/
📸 MY FILMING GEAR 📸
Here’s everything I use to film my videos, including cameras, lights, microphones and more: kit.co/nilsynils/my-filming-gear
🕶 SOCIAL MEDIA 🕶
Facebook: / lrn2diy
Instagram: / lrn2diy
Twitter: / lrn2diy
TikTok: / lrn2diy
📲 MORE DIY GOODNESS 📲
Check out our many projects and plans at
lrn2diy.com
📲 WANT TO LEARN MORE ABOUT 3D PRINTING? 📲
All things 3D Printing at The 3D Printing Zone
/ the3dprintingzone
📚 TWO FREE AUDIOBOOKS! 📚
To get two free audiobooks from Audible, just follow this link: goo.gl/QGFC4Q
00:00 - Introduction to MIG Welding
00:17 - Selecting the Correct Wire
01:15 - Basics of Gas Shielding
01:54 - Selecting Proper Rollers
02:48 - Machine Polarity Settings for MIG vs Flux Core
05:08 - Choosing the Right Gas
07:02 - Setting Up the Welder and Adjusting Settings
07:46 - Practical Welding: Initial Attempts and Adjustments
15:13 - Next Steps

Пікірлер: 17

  • @LRN2DIY
    @LRN2DIY6 ай бұрын

    Be sure to check out Jeff's video at kzread.info/dash/bejne/hZWCk9KElKa7h7A.htmlsi=JdVNOXglofz8AQtp to learn more!

  • @-DIYPRO-
    @-DIYPRO-6 ай бұрын

    It was fun welding with you! Great video!

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Likewise, my friend! I really appreciate you teaching me.

  • @petenelson8136
    @petenelson81366 ай бұрын

    Excellent video. I did exactly the same thing you did = bought a Yes welder pre sale and got the same welder you got. I also have never welded before, but I bought a farm so figured I'd need to learn how to weld as I'm sure I'll be fixing things on the farm as we build it up. It was very interesting (and I need to check mine) to learn about the different type of wheels, and the switching from positive to negative if your using flux vs. solid core. I've only used flux core (need to purchase a bottle of gas and a regulator) so I better check to see if mine is set up with the correct wheel and polarity. I've only welded a couple of things so far, and your welds look WAY better than mine. Thanks for showing how the difference in voltage affected the welds. I didn't understand that aspect of welding at all, like I said I've never welded before so ... Love your channel and love doing DIY stuff = never be afraid of trying to learn a new skill.

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Sounds like you're in a similar boat to me and we both have lots to learn! Congrats on the farm and hopefully the welding comes in handy!

  • @JCWren
    @JCWren6 ай бұрын

    1) A good weld should sound like frying bacon. 2) Some of the new machines have automatic polarity switching, which is really nice. You tell it if you're using TIG, MIG, SMAW, flux core, whatever, and it just does it. 3) While the gas flow rate for MIG isn't super touchy, note that some of the floating ball regulators specify that the ball should be centered on the desired flow rate graduation, while others specify the top or bottom of the ball should touch it. If the gauge doesn't specify it, use the center of the ball and the worst that'll happen is you'll be about +5 or -5 CFM off what you want. 4) Some gas nozzles screw on and off, while others (like the Vulcan Omnipro) just pull off and push on. 5) Keep the nozzle clean. One of the 7 to 8 functions the welpers (welding pliers) have is using the tips to basically ream the nozzle out.

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Such great info in this comment! Thank you, JC!

  • @fjdelahoz
    @fjdelahoz6 ай бұрын

    Nice video. Well done !

  • @willmallory9085
    @willmallory90856 ай бұрын

    Excellent video Team

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Thanks, brother!

  • @ccscraps6946
    @ccscraps69466 ай бұрын

    Got ur channel from Mechmaster. Great tips. Especially w the polarity. That can get confusing at least for wen I started. Stay safe out there. See u on the next.

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Thanks for coming by and watching!

  • @JohnR9965
    @JohnR99656 ай бұрын

    Nice

  • @paulrattray8090
    @paulrattray80906 ай бұрын

    I confused i have a wire feed welder small one doesnt use gas thought it was a mig welder so do they make mig that doesnt use gas

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    It might be Flux Core. MIG uses gas as a shield so if it can’t take gas, it’s not MIG.

  • @julietphillips1991
    @julietphillips19916 ай бұрын

    If the day or time ever comes when welding does not involve sparking or gas, I might be interested. I just feel I'm gonna start a fire!

  • @LRN2DIY

    @LRN2DIY

    6 ай бұрын

    Haha - fair enough. It is a messy business to be sure.

Келесі