great video! perfectly clear thank you. this could be a lifesaver when the new serato stems feature is released!
@kenwa618010 ай бұрын
Thank you! I plan to MIDI map acapella and instrumental to my 'back' and 'load prepare' buttons that I never use!
@dirtyd19114 ай бұрын
Thank you!
@Coties Жыл бұрын
You are awesome for this
@djswooptharemixking89203 жыл бұрын
Thank you for the tip i just got this controller im a turntablist but I'm giving myself more room to DJ a lot of places don't have big work space for turntables.
@giftothegabmusic Жыл бұрын
Thank you
@hwtrk6593 Жыл бұрын
Thank you for this video. Saved me. 🎉
@ale-tq6bh Жыл бұрын
THANK YOU SOOO MUCH.....ALLELUYA
@woulddrow5402 жыл бұрын
thanks dude!
@howiedarkstar5 жыл бұрын
Very clear, thanks Jay
@blak14ace Жыл бұрын
very clear great video .. needed this
@mixmasterkevan85013 жыл бұрын
thanks
@dj_prez-14 жыл бұрын
Thank you very much for this video. Now I can do the same midi mapping.👍
@Genolexis2 жыл бұрын
Amazing video. Thank you
@claudiosantini72265 жыл бұрын
awesome Jay
@djxsquizit5 жыл бұрын
Thank you dude 🙏
@battosaijenkins946
4 жыл бұрын
@Jay Brannan, hey man great vid. Do you know if there's a way to set the brake speed for start/stop for the jog wheels? For example if you press stop I want it to kind of slow down a bit like a turntable instead of a instant stop. I can see it on settings but it's greyed out and wondered if its possible to allow this somehow? Anyway thx in advance.
@DJJayBrannan
4 жыл бұрын
Have to check, but I only know of the settings in Serato.
@anthonymattina10764 жыл бұрын
Very helpful, thanks man!
@TreekooEnVivo4 жыл бұрын
thanks for the information bro!
@Ranjsounds5 жыл бұрын
Great video Jay
@DJJayBrannan
5 жыл бұрын
Thank you!
@farajalrasheedi11423 жыл бұрын
😘🌹🌹🌹Thanks you helped me a lot
@rodrisand02254 жыл бұрын
Pioneer srt 1000 or serato should prepare an update so that the fx can be used in the pads as in the case of the ddj 1000 and other controllers in rekordbox, I have an srt but only that does not convince me so that so many expansions and fx if has a limitation in use ♂️
@djk.i.d3925 жыл бұрын
Please tell us if the cross fader curve can be mapped! thank you !
@DjdirimixGiordy
4 жыл бұрын
Kyle Deosaran yes I mapped mine to to sampler volume
@moesnuts3 жыл бұрын
Can you do this for the MIC channels? 🎤 can you assign the internal Serato effects to the microphone input channel?
@djducassell99564 жыл бұрын
Sucks the 1000 isn't post fader on Serato Effects
@Earthcitizen4609
11 ай бұрын
The srt no post fader effects.……¿
@AlwaysActivated36527 күн бұрын
Great video, how to midi map acapella stems to key lock?
@ces4r123456789 Жыл бұрын
Hello good video. And how would you select for use in channel 1 ,2,3 or 4
@djrez21074 жыл бұрын
Jay now that the SRT has been out for a while you prefer Rekordbox or Serato?
@djkingshameek4 жыл бұрын
Didn’t mention Serato effects aren’t post fader tho
@P4boot
4 жыл бұрын
Exactly.. 😂 waste of time!
@wikkidselekta5 жыл бұрын
i'd get a DDJ-SP1 just for Serato FX and map FLIP on it, just to keep the 1000SRT stock as much as possible. Besides, that controller & sub-controller tandem would look...NICE.
@DJJayBrannan
5 жыл бұрын
Cool choice, or the DDJ-XP1
@eltruheyo4 жыл бұрын
Hi Jay, do you know if there are any tutorials on fully using the DDJ-1000SRT?
@DJJayBrannan
4 жыл бұрын
I believe We are Crossfader has a pretty in depth video. What are you looking for in a video??
@eltruheyo
4 жыл бұрын
Jay Brannan I want to focus specifically on the use of the sample function pads.
@djflakoelmonstruo99082 жыл бұрын
I use a midi controller for it the mpc controller it has 16 pads
@SUPAROCKINDJSMASH5 жыл бұрын
Can u explain that again cause u drop the camera explaining the mapping also why u didn't assign the color effects to the effect you used that would be great
@DJJayBrannan
5 жыл бұрын
Let me see what I can do!
@jkrooks25844 жыл бұрын
Why when you hit the settings button on software there isn’t an cd or vinyl option to calibrate the jog wheels ? It’s showing in my settings but not under your settings!
@kimanirashad8066 Жыл бұрын
how do I use the split cue mixing on the ddj 1000srt or where is it?
@thisisdanosworld3 жыл бұрын
I just bought a 1000srt and coming from an SX. How do I load the songs on it because there doesn’t seem to be load buttons for each deck like the SX series controllers.
@priyonjoni5 жыл бұрын
Awesome video Jay. Some folks may ask if you can share the mapping file.
@DJJayBrannan
5 жыл бұрын
Sure, I'll set one up for all the effects first!
@mrguapsuk4 жыл бұрын
Hi Jay. I spotted that your 4 beat loop button was flashing during the video. How did you make it flash? I’ve mapped mine to autoloop but I can’t figure out how to make it flash when a loop is active? Would be great if we could have the IN/OUT buttons flash when a loop is active also
@Nathaniel_Luciano9 ай бұрын
What did you click to clear?
@bizzybdj4 жыл бұрын
Do u have any vids on xfader curve to midi button. Im about to get a 1000 but wont if it cant be done
@Earthcitizen460911 ай бұрын
Are they pos fader serato fx
@djestrela25 жыл бұрын
Good video This method definitely works, but you lose the original functions of the buttons/knobs. Ideally you could assign multiple functions to each control, and select the one that actually runs using internal variables. Those variables would be setted using additional shift buttons. Both Traktor and VDJ support this, Serato and Rekordbox doesn't. This is the #1 reason I use Traktor
@DJJayBrannan
4 жыл бұрын
I get that and agree!
@bboymac844 жыл бұрын
bro use screen capture!! wayyy easier!! you can film the screen and use the laptop cam at the same time!!
@DJJayBrannan
4 жыл бұрын
Thanks for the suggestion!!!
@dariend10003 жыл бұрын
Hi, how do you delete it to put another Pk button? I don't know what you do to remove it
@carloscamacho18934 жыл бұрын
How does the MacBook air running serato with hardware?
@selyang6475 жыл бұрын
whats the diffrence between the pioneer ddj sz n and hte pioneer ddj sz s and pioneer sz and pioneer ddj sz 2 and the pioneer ddi sz2n and the pioneer ddj rz and the pioneer ddj rzx
@DJJayBrannan
5 жыл бұрын
Wow, a lot going on here- SZS is a silver SZ. SZ2 vs SZ1 you get post fader effects and built in flip. RZ is an SZ for rekordbox and the RZX is mainly for use with rekordbox video since it has video touch screens included with the unit. What kind of a DJ are you, types of gigs and such? Also what software do you use?
@ramiro1106795 жыл бұрын
My pioneer controller ddj 1000 srt have a problem I do everything how the instructions show me and everything working only the pads don working I do everything and don’t work can you help me please thanks you have a good info en you videos please let os more that you knowing please thanks
@Drelo1204 жыл бұрын
Amazing Video, I have an SX3 and I want to midi my Echo color effect, would it let you...Thanks in Advance
@andrewmaulseed34013 жыл бұрын
I want to know how to turn up the curve volume on the srt 1000
@DJJayBrannan
3 жыл бұрын
Meaning turn up the fader curve? Ill have to look into that because I don’t think you can. You can adjust the individual track volume in Serato as well as the master volume, but on the SRT it would be turning up the trim as it stands.
@juanshaftpatel74884 жыл бұрын
what kind of macbook air do you use?
@Earthcitizen46094 жыл бұрын
How about post fader
@djk.i.d3925 жыл бұрын
Hey Jay.. will the newly mapped midi effect be post fader? for example the original echo ( not the echo out )
@motycochi9825
5 жыл бұрын
Kyle Deosaran hi I join the question.. ty jay
@DJJayBrannan
4 жыл бұрын
Post fader
@djducassell9956
4 жыл бұрын
This unit does not have post fader Serato effects
@LEGiON408313 жыл бұрын
Is there anyway I could get clean echo out boss
@mecdj4 жыл бұрын
Hey Jay great video.. my big question.. can I get my auto loop to match my Serato screen? So if it’s set on 8 bar on Serato when I hit 8 bar on my SRT1000 auto loop that’s what happens instead of the standard 4 bar .. please help !
@psyn_b
4 жыл бұрын
What I did was remap the 4 Beat Loop button to the Autoloop button in Serato and the In/Out buttons to 1/2x and 2x beat loop. Shift+In/Out for regular In/Out functionality. Make sure you have the loop controls open in Serato in order to midi map them.
@mecdj
3 жыл бұрын
Dean F that is my only gripe with this controller it would be perfect otherwise, I find myself using my SP-01 just to set my loops !
@mecdj
3 жыл бұрын
Dean F well I love my Serato version and those jog wheels are just as you want them !
@kristjanmartis85784 жыл бұрын
Great video Jay. Tell me can I also midi map the sound color FX buttons (D.Echo, Pitch, Noise)?
@DJJayBrannan
4 жыл бұрын
Not sure, I'll check.
@kristjanmartis8578
4 жыл бұрын
@@DJJayBrannan thank you
@codymoreland8964
4 жыл бұрын
@@DJJayBrannan Im also wondering if this is possible. I would like to map the Epic Reverb effect in Serato to the D.Echo FX button on the controller.
@kristjanmartis8578
3 жыл бұрын
@@DJJayBrannan So did you check?
@kristjanmartis8578
2 жыл бұрын
Still waiting..
@djcashwell5 жыл бұрын
Can you midi map the crossfader curve ?
@DJJayBrannan
5 жыл бұрын
I'll check.
@djk.i.d392
5 жыл бұрын
I tried once on my sx3 but couldn't .. Jay can you tell us? once it can.. i think i'll be buying the controller.
@xxdjridexx
4 жыл бұрын
you can I did
@dariend10003 жыл бұрын
Can someone give up like deleting what was predetermined to make the video and put other buttons in favour
Пікірлер: 87
great video! perfectly clear thank you. this could be a lifesaver when the new serato stems feature is released!
Thank you! I plan to MIDI map acapella and instrumental to my 'back' and 'load prepare' buttons that I never use!
Thank you!
You are awesome for this
Thank you for the tip i just got this controller im a turntablist but I'm giving myself more room to DJ a lot of places don't have big work space for turntables.
Thank you
Thank you for this video. Saved me. 🎉
THANK YOU SOOO MUCH.....ALLELUYA
thanks dude!
Very clear, thanks Jay
very clear great video .. needed this
thanks
Thank you very much for this video. Now I can do the same midi mapping.👍
Amazing video. Thank you
awesome Jay
Thank you dude 🙏
@battosaijenkins946
4 жыл бұрын
@Jay Brannan, hey man great vid. Do you know if there's a way to set the brake speed for start/stop for the jog wheels? For example if you press stop I want it to kind of slow down a bit like a turntable instead of a instant stop. I can see it on settings but it's greyed out and wondered if its possible to allow this somehow? Anyway thx in advance.
@DJJayBrannan
4 жыл бұрын
Have to check, but I only know of the settings in Serato.
Very helpful, thanks man!
thanks for the information bro!
Great video Jay
@DJJayBrannan
5 жыл бұрын
Thank you!
😘🌹🌹🌹Thanks you helped me a lot
Pioneer srt 1000 or serato should prepare an update so that the fx can be used in the pads as in the case of the ddj 1000 and other controllers in rekordbox, I have an srt but only that does not convince me so that so many expansions and fx if has a limitation in use ♂️
Please tell us if the cross fader curve can be mapped! thank you !
@DjdirimixGiordy
4 жыл бұрын
Kyle Deosaran yes I mapped mine to to sampler volume
Can you do this for the MIC channels? 🎤 can you assign the internal Serato effects to the microphone input channel?
Sucks the 1000 isn't post fader on Serato Effects
@Earthcitizen4609
11 ай бұрын
The srt no post fader effects.……¿
Great video, how to midi map acapella stems to key lock?
Hello good video. And how would you select for use in channel 1 ,2,3 or 4
Jay now that the SRT has been out for a while you prefer Rekordbox or Serato?
Didn’t mention Serato effects aren’t post fader tho
@P4boot
4 жыл бұрын
Exactly.. 😂 waste of time!
i'd get a DDJ-SP1 just for Serato FX and map FLIP on it, just to keep the 1000SRT stock as much as possible. Besides, that controller & sub-controller tandem would look...NICE.
@DJJayBrannan
5 жыл бұрын
Cool choice, or the DDJ-XP1
Hi Jay, do you know if there are any tutorials on fully using the DDJ-1000SRT?
@DJJayBrannan
4 жыл бұрын
I believe We are Crossfader has a pretty in depth video. What are you looking for in a video??
@eltruheyo
4 жыл бұрын
Jay Brannan I want to focus specifically on the use of the sample function pads.
I use a midi controller for it the mpc controller it has 16 pads
Can u explain that again cause u drop the camera explaining the mapping also why u didn't assign the color effects to the effect you used that would be great
@DJJayBrannan
5 жыл бұрын
Let me see what I can do!
Why when you hit the settings button on software there isn’t an cd or vinyl option to calibrate the jog wheels ? It’s showing in my settings but not under your settings!
how do I use the split cue mixing on the ddj 1000srt or where is it?
I just bought a 1000srt and coming from an SX. How do I load the songs on it because there doesn’t seem to be load buttons for each deck like the SX series controllers.
Awesome video Jay. Some folks may ask if you can share the mapping file.
@DJJayBrannan
5 жыл бұрын
Sure, I'll set one up for all the effects first!
Hi Jay. I spotted that your 4 beat loop button was flashing during the video. How did you make it flash? I’ve mapped mine to autoloop but I can’t figure out how to make it flash when a loop is active? Would be great if we could have the IN/OUT buttons flash when a loop is active also
What did you click to clear?
Do u have any vids on xfader curve to midi button. Im about to get a 1000 but wont if it cant be done
Are they pos fader serato fx
Good video This method definitely works, but you lose the original functions of the buttons/knobs. Ideally you could assign multiple functions to each control, and select the one that actually runs using internal variables. Those variables would be setted using additional shift buttons. Both Traktor and VDJ support this, Serato and Rekordbox doesn't. This is the #1 reason I use Traktor
@DJJayBrannan
4 жыл бұрын
I get that and agree!
bro use screen capture!! wayyy easier!! you can film the screen and use the laptop cam at the same time!!
@DJJayBrannan
4 жыл бұрын
Thanks for the suggestion!!!
Hi, how do you delete it to put another Pk button? I don't know what you do to remove it
How does the MacBook air running serato with hardware?
whats the diffrence between the pioneer ddj sz n and hte pioneer ddj sz s and pioneer sz and pioneer ddj sz 2 and the pioneer ddi sz2n and the pioneer ddj rz and the pioneer ddj rzx
@DJJayBrannan
5 жыл бұрын
Wow, a lot going on here- SZS is a silver SZ. SZ2 vs SZ1 you get post fader effects and built in flip. RZ is an SZ for rekordbox and the RZX is mainly for use with rekordbox video since it has video touch screens included with the unit. What kind of a DJ are you, types of gigs and such? Also what software do you use?
My pioneer controller ddj 1000 srt have a problem I do everything how the instructions show me and everything working only the pads don working I do everything and don’t work can you help me please thanks you have a good info en you videos please let os more that you knowing please thanks
Amazing Video, I have an SX3 and I want to midi my Echo color effect, would it let you...Thanks in Advance
I want to know how to turn up the curve volume on the srt 1000
@DJJayBrannan
3 жыл бұрын
Meaning turn up the fader curve? Ill have to look into that because I don’t think you can. You can adjust the individual track volume in Serato as well as the master volume, but on the SRT it would be turning up the trim as it stands.
what kind of macbook air do you use?
How about post fader
Hey Jay.. will the newly mapped midi effect be post fader? for example the original echo ( not the echo out )
@motycochi9825
5 жыл бұрын
Kyle Deosaran hi I join the question.. ty jay
@DJJayBrannan
4 жыл бұрын
Post fader
@djducassell9956
4 жыл бұрын
This unit does not have post fader Serato effects
Is there anyway I could get clean echo out boss
Hey Jay great video.. my big question.. can I get my auto loop to match my Serato screen? So if it’s set on 8 bar on Serato when I hit 8 bar on my SRT1000 auto loop that’s what happens instead of the standard 4 bar .. please help !
@psyn_b
4 жыл бұрын
What I did was remap the 4 Beat Loop button to the Autoloop button in Serato and the In/Out buttons to 1/2x and 2x beat loop. Shift+In/Out for regular In/Out functionality. Make sure you have the loop controls open in Serato in order to midi map them.
@mecdj
3 жыл бұрын
Dean F that is my only gripe with this controller it would be perfect otherwise, I find myself using my SP-01 just to set my loops !
@mecdj
3 жыл бұрын
Dean F well I love my Serato version and those jog wheels are just as you want them !
Great video Jay. Tell me can I also midi map the sound color FX buttons (D.Echo, Pitch, Noise)?
@DJJayBrannan
4 жыл бұрын
Not sure, I'll check.
@kristjanmartis8578
4 жыл бұрын
@@DJJayBrannan thank you
@codymoreland8964
4 жыл бұрын
@@DJJayBrannan Im also wondering if this is possible. I would like to map the Epic Reverb effect in Serato to the D.Echo FX button on the controller.
@kristjanmartis8578
3 жыл бұрын
@@DJJayBrannan So did you check?
@kristjanmartis8578
2 жыл бұрын
Still waiting..
Can you midi map the crossfader curve ?
@DJJayBrannan
5 жыл бұрын
I'll check.
@djk.i.d392
5 жыл бұрын
I tried once on my sx3 but couldn't .. Jay can you tell us? once it can.. i think i'll be buying the controller.
@xxdjridexx
4 жыл бұрын
you can I did
Can someone give up like deleting what was predetermined to make the video and put other buttons in favour