Note to beginners: After using your Dremel and cutting wheel make sure that you use enough thermite to melt your solder back into the board, and to test it, try to power it on and dunk it slowly in some warm tap water.

Me: "Oh, removing a port without a heat gun, this should be interes...IS THAT A GRINDER!?!?!"

Step One: Never use a cut-off wheel to remove a component from a circuit board.

@NORMALLYRETRO

6 жыл бұрын

I've never soldered once...and I knew this wasn't the right thing to do.

@Joesge

6 жыл бұрын

You can buy the part if you want to replace the entire PCB www.joesge.com/products/beats-studio-2-wired-wireless-charger-port-parts

@nathan8703

5 жыл бұрын

haha like what the. never seen anyone do this.

HOT DAMN THANK YOU FOR THIS VID!! I have replaced 2 200 buck phones cuz couldnt wait for insurance to send new phone, or store to repair. i also have a set of btooth headphones this repair will help me with. if I could hug you, I WOULD. THANKS FOR TAKING TIME TO MAKE THIS, YOU ARE MY HERO!!!!!!

This is just like plucking the tooth with a nose plier at home rather than going to a dentist.

If there is no money for authorised service, this is a good alternative

@saramara69

2 жыл бұрын

that was the intention of this video...

This is the worst desoldering job ever seen.

"Did I hear a drill? Dale! Dale, no power tools!"

At 8:32 the dogs sound like they are tying to lay down some tight as beats lol... But thanks for the tutorial!

Oh my god, this was like watching a horror movie! No usb port! Don't turn your back on the man with the dremel tool!

Woof Woof!!! My dog and i ran to the front door thinking we had company :)

Thank you for the video. What kind of soldering iron did you you? It took the port of with much ease.

A quicker method is to remove is to use a 1300w SDS hammer drill!! To replace just place a small thermonuclear charge on top of the port.

every one pretty much agrees that this guy made a funny video, or he's just....a Tee Dee Dee. if you don't have a heat gun, get a metal funnel like object, put it at the business end of a hair dryer, the funnel will Ensure you don't burn the board, by concentrateing the hot air to one all area. ty

You forgot to mention the Sledgehammer and Chisel .

It's work! Thanks man! My room is still in sparks :(

Please people - if you love / respect your gadgets - do not repair in this manner! This is insane! You're likely to cause far more damage than good. Use the proper tools, or pay extra and get a shop to do the repair.

@flyerboy2594

8 жыл бұрын

Big nega

NO, JUST NO, this is inexcusable man. It's much easier, better, and *cheaper* in the long run to do it the RIGHT way. Plus you wont risk damaging the device or your body.

Lo siento pero te lo pongo en español, un poco mas y cojes un soplete para soldar, para empezar necesitas otra punta para soldar bien, lo segundo estas to loco con la dremel, con la misma soldadora, quitas los puntos laterales de abajo primero, despues desuelda la parte de arriba, y pordios hazlo encima de una toalla que te cargas la placa, sino te cojes papel de aluminio y con un secador industrial, lo calientas , pq vaya un poco mas y lo sacas con un sierra de arco

@rolandoperez8248

8 жыл бұрын

+Cristian Aguilar navarro hahahahhah Con una sierra para cortar arboles lo hubiera quedado mejor el trabajo

Nice video!! IT WORKED FOR ME !! I will make my own video how to repair BGA chip using microwave oven !! :)

A hypodermic needle?! Everyone, please do NOT try to leverage components (or bend in general) a hypodermic needle! They are (duh) hollow inside, are prone to breaking, and can enter your body fairly easily. Having a glass eye is not worth not finding a pocketknife or sturdy metal piece.

Wow! That's an amazing tutorial! Congratulations and thank you for sharing! I am going to try it on an old phone but how i can ask or find the cutter or a simmilar that you have?

@saramara69

9 жыл бұрын

Thanks compatriot. Ebay search for "mini drill grinder engraving tool"

how do you make the solder that was underneath the conector?

ooh man u need to drink some water before u did it because it can help you refresh your eyes.Good work big brother have a nice day

Where are you, what Country I need something fixed a micro USB port on a small circuit board, it needs to be replaced, the part is not made as after market so this is my only option, willing to pay to fix it. Great work btw

why do you guys do this crap , you dont even need a heat gun, all you need to do is put the soldering iron on the pin behind the usb port, to each pin to melt the solder and it will come loose quite easy, i do this to transistors and that's the best way to do it.

You would have been better off gently cutting the anchor leads with some flush cuts and then desoldering the pins connections. This would allow you to take out the component and then you can remove the four anchor points separately. Better to sacrifice the faulty component rather than the board. I would also recommend that you use a smaller iron tip for this kind of an application. A soft bristled brush or toothbrush would have been more handy that that wad of cotton too.

what if the port was already off and I want to fix it back to it's location? how to fix that?

Is there a way to remove it without damaging it? Because the board is broken but the USB port is perfect

as soon as the video started i burst out laughing,a cut-off wheel??? ahahaahaha

I'm trying to do the same thing, but the solder won't melt. Using flux and solder the original solder won't melt. I'm even using a butane torch with soldering tip. What am I doing wrong?

This is insane!

Easir method. Hold a candle underneath the port. At a distance ofcourse.

how many fingers do you have left?

Looks a right bodge job..

very good soldering iron

You could used cutter simple cut the usb port from cuter tool.

I hammer would be so much easier than this. A microwave would also be just as useful.

The title should be how to remove micro USB port (while damaging the port is a must) without hot air.

NICE JOB

Does this tactic also work for a grown in toe nail? Asking for my doctor

Can someone explain to me why he soldered across all 5 pins and then removed it again? How is that soldering the pins?

thank u very much bro

I tried doing this before I saw this video and I had allot of trouble getting the usb flat on the motherboard. My question "the bottom pins from the usb are those ground or would it be a problem cuting one of those bottom pins that go through the board"

@saramara69

9 жыл бұрын

MGrider If you mean the big pins at the four corners that are part of the usb case (chassis) , they are all connected to the ground. One less would meen less solid usb, but wouldn't cause electrical problem.

omg that was awesome.

better invest on a hotair / desoldering station if you have decided to replace a micro usb port yourself. it could be used for the next project and the next one and another next one. even the cheap one will do the job.

though I agree with most here saying WTF kinda high made him recommend this as a solution to fix your charge port... yet he successfully fixed it.lmao Still not anyway I'd recommend or even try. but kudos for your dumb luck at not destroying the motherboard.

What is coat of this machine and share link to buy

Better to hit it again by soldering iron

Hp laptop g62 i can't connect usb......i was soldaring usb ports but failed. How can i fix it......pls help me

with not use dynamite?

mine doesn't have chassis pins it ripped off the board isn't damaged thi

...kids don't try this at home.

very nice

this guy is training to be a dentist lolsaw ya cheekbone out for a filling wtf!

what size nail are you using in your iron.? get yourself a nice small soldering tip and a strong iron at least 60wat variable. I use a gas one. get yourself a spring loaded solder sucker. because of the socket surrounded all the heat is disipated so your iron never warms up. use a hot iron and suck away the solder as soon as it starts to melt. whipe your soldering tip clean on a damp sponge now and then for nice connections on joints. and always use flux where possible. whole job should take you no more than 5mins. I konw your trying to point out that you can remove the case with a dremmel wheel. But a sharp pair of side cutters will do the same job. With less risk to the board. better to do it right first time. than have to do it again later. tidy safe and professional.

I do not agree with using a cutting wheel to remove the usb port. A cutting wheel is designed for cutting metal parts, such as the rusty bolts on a car exhaust. You could really destroy your circuit board with a cutting wheel! I have a Lenovo X220 tablet I bought on Ebay. It arrived with 2 bad usb ports! They both have bent pins. I am going to try removing the ports with solder wick and a soldering iron.

im just tryna fix my midi keyboard man

The Butcher of Blackberry

solder with a big stick ???

SOLO TE FALTÓ USAR EL SOPLETE Y LA ESTILLSON Y MAZO Y CICEL!!

butcher repair...

i need help...i got this bluetooth speaker and the little part inside the usb port fell out...idk why, mayby because i dropped the speaker on accident but if anyone could help me and tell me how can i fix this.. if i can. or where i can find a whole new usb port so i can change it.. or tell me what that part is called..10 points for the one who tells me anything pls help.

Very nice

ok..grrrr..thank you..gd video tho too!

Eh si....i bei vecchi tempi,anche se ci voleva coraggio!

I'll try using hammer drill. XDD "Destruction Complete. Enemy Destroyed" (c)

Cool

Either a good soldering iron and Chemtronics Solder Wick or hot air (as long as you know how to work either). Lead free solder requires more heat and can make them hard to remove with some irons....add regular solder then desolder with wick and repeat. It mixes and lowers the melting point. IF you do want to try it on bad boards like he says there should be no shortage if people follow this joker's lead. He gets an F for Effin idiotic.

What soldering gun are you using

@saramara69

9 жыл бұрын

supermaniv1 a cheap one like this is good because it has a high power switch. You need a lot of heat for the 4 external chasis pins. panda-bg.com/en/product/Soldering-Gun-88-9012-ZD-90-25-130W-CE-/321106/. But remind you need a of practice in soldering if you are a beginner. A mistake may destroy your device.

@wupme

8 жыл бұрын

Dude you don't seem to got practice yourself. You literally use the most stupid way to remove it....

WTF? Echoing what everyone else said: PLEASE DO NOT FOLLOW THIS! You're much better off taking a broken electronic and practice removing and placing small parts on it with a soldering iron, instead of sawing it off.

at 6:06, a wild clip appears with cotton. Totally not your style...

@abdullast3434

7 жыл бұрын

Nicolas Martin Garofalo 😂😂😂

@galaxyprime6543

6 жыл бұрын

lol hahaha ha and I'm still watching Hello birds

So, lemme get this straight. You take a cut-off wheel to the charging port when you don't wanna damage nearby components? Ummm, excuse me. What the fuck!

him i avoid useing heat it may damage other parts 5 second later bweeeewwwm uses saw

what are u using to glue it back on I have same problem and can't access a soder gun but I did remove the USB port and have a new one on standby

@saramara69

9 жыл бұрын

Rico Rod.without a soldering iron and good skill in soldering you can't do anything. Go to a technician to do it for you.

@ZeroPopular

8 жыл бұрын

+Rico Rod. Just heat up any steel or copper tipped metal rod and use it in the same manor.. don't listen to these idiots.. its easy

@RicoSF415

8 жыл бұрын

Thank you for the replies not sure how long its been since this post but phone jus catching dust at this moment maybe one day ill get to it now i have 2 s3 with same issue jus gave up hahah thx tho really appretiate it

@RicoSF415

8 жыл бұрын

Zero Popular hahaha...i hear you

@ZeroPopular

8 жыл бұрын

*tips his hat*

Okay so if you can't afford simple heat gun, then maybe you'll be able to afford the rest of the tools to rip open the usb port. Great.

u can use hot air gun to remove in 10 seconds

I think I'd rather save up to buy the hot air station

your dog is scary

WTF!! That's all I can say!

a dremel lol.. you can just heat up a screw driver with a candle and melt those joints ... also if you have no soldring iron.. you can heat up a screwdriver and use that... it's not like it has to be rocket fuel temp.. it's pretty easy... use Torques for micro-soldering... etc.. TEAM ZERO - WE NEVER LIE NOR WASTE TIME - THEZEROWORLD o COM

WTF dude Dremmel ?

Emergency repair

Couldn't you just desolder it with hot air and you used dremel to trim off the corners?? That's really bad man, you could just harm the pcb!! Why did you do it this way??

To dangerous for you and pcb; free hand?

try to heat it up first

noooo GOOD

I put my SIM card in the wrong place

@Kytachan

8 жыл бұрын

Oh god.

im paul

Is this for real?

It's more worth to spend 20$ on cheap hotair, that possibility of destroying your motherboard.

killer

If you need the entire part here is a link for the part www.joesge.com/products/beats-studio-2-wired-wireless-charger-port-parts

What the f**** is going on in this world.

hey guys ! theres a faster method than that! just use 14in chop saw then weld with mig welder! lol

To dangerous for me.

Flux dude, F-L-U-X!

ohhhhh..... hell no!

😂😂😂😂😂😂 first minutes

hahahah extreme