I'm not a painter but you sure make it look too easy! I enjoy watching your videos. Thanks for the video.

Idk what bugs me more, the sanding job on the blend panels or the end where we see the finished clear and only see the clear up close on the blend panels. I wanted to see the clear on the door you based.

Paint came out beautiful! Why are people hating on his technique? Go away obviously the paint was flawless...the only thing is I would use a hooded respirator so the paint isn't getting into my eyes...other than that everyone has their own technique. Nice work

Last week i get my sata 5000 rp 1.3 i use for clear i get a hard time setting right you really help a lot telling me how you setting your sata for high solid clear i really aprecciate if you help me killer job men

Jimmo we need details. Which gun part number, which nozzle size did you pick for each gun HVLP and RP, Where did you put the gun air pressure settings. Did you use the HVLP for base and the RP for clear? You know. All the good stuff.

All these super pro painters who lay clear like "glass" - NOT like the painters goal & the paint manufacture's system - is to replicate the factory orange peel finish.. haha

@eduardovillicana6194

4 жыл бұрын

Yeah they use too much air pressure

Have to agree with a lot of the comments here. There's good tradesman and there's this guy.

@Refinishnetwork

6 жыл бұрын

I thought we were friends.

Wow....its crazy how we all like different guns for different approach and applications....I mainly use the 5000hvlp for all my base and a supernova for clear. I’ve used the RP for base a few times...half and half results...but the transfer is nice...smaller tip for difficult silvers..those RPs hose it for sure . It’s a fast mover. I recently tried the 5500s ...not a fan.. booth sounds quiet...what are you spraying in? Maybe it’s the mic set up ?

Pretty good for a Sata. Will you make review 4000 (or 3000) vs 5000? Also comparison Iwata or DeVilbiss with Sata 5000 will be very interesting.

Los felicito al maestro pintor .yo también pinto automóviles .soy peruana desearía saber si esta pistola Sata 5000 hay en venta en mi país .que empresa es .gracias

This week i get my sata 5000 rp 1.3 i use for clear and get a really hard time setting the gun in the sweet spot for if yoy help my with that i realy apreciate a lot the psi you use and the material adjust hope you cant help me men killer job

A nice gun in a pro make it a masterpiece.excellent work man.

blend panels look a bit too shiny

the trick is wait 20 minute the first coats after that's no need too worry for dripping jemo you did a good jobs thankyou for sharring the sata 5000 I believe he using rp and its 1.3 needle at 27 the pressure this will work pretty good

hi nice job man !!! just as quick question, what the secret of not using the cutting creme in your videos after clear coat ?

What 5000 you use for clear rp hvlp a get this week a 5000 rp and get a hard setting the right for the clear if you help a thanks a lot men killer job men

Everyone has a technique that works for them, you have a very unusual one, however its working... do you plan on blocking and buffing your work afterwards?

liking the new 5000 finish great job.

I'm guessing because he used a faster clear he probably had to change technique up so there would be no dry spray like there would be going. Depends on clear though I have used clears that dry in 15 mins 30 for buff

can you tell me about the rp 1.3setting for clear thanks a lot

impressive gun, that somewhat present overspray mean the flow is strong enough ? the base, from bottom up and the clear from top down ? any reason ? I don't spray cars but black or transparent gloss on piano cases, often done in polyester which I did not try yet , I use clear lacquer stained with black "paste" or concentrated dye one K or 2K produits (nitro or PU) work from top down.

Why arethe panels too shiny ? I still say the Sagola 4500 is the Big Daddy of them all.

I do not know how u walk a car I spray way to close n fast for that ever to work.. nice vid

that gun nozzle and SATA 1.2 or 1.3, and which indicated to varnish application.

I like that fan..Can you say BIG. You need some eye protection with all that overspray. Came out nice! I was surprised you held the gun so far back, unlike your other videos.

What grit was the front door you blended into sanded at?

@1981anestis

4 жыл бұрын

3000 hahahaha!!!

@808autobody7

3 жыл бұрын

Fkn hand callous. ✋ so Shiney. 2 months later peeling off. Need some tooth for that paint to grab buddy. Nice finish....odd technique but looks BEAutiful

What fluid tip you have for hvlp?? 1.2 or 1.3?

This is with the Sata 5000 !!! i could do better with Satajet B msb set up and that was long time ago and this was when i was just starting to paint, what is this? oarange and why you wave so much U drunk?

What s the simply diffrent betwen RP or HVLP ❓ (sorry my English not good) thanks

Probably should check my spelling before I post lol. Yep you beat us. I have been using the 5000 hvlp for a while and it works very well I must agree.

Man, you make it look so damn easy. :-)

Qual a melhor pistola para aplicação de clear sata 5000 RP ou Iwata WS 400 1.3 HD clear

the gunnman needs too show him how too PAINT

I think you could get a nicer flow on the clear if you hold the gun a lot closer and move faster..75 to 85 percent overlap and move. I realize everyone has their comfort zone but adapting to this method you might like the results...just sayin

Whatever tech your spray ..if it working best for your job like this..just go for it..and hater can shut up...best whish for your vid...😄👍👍👍👍👍

Is that a high air pressure for the sata on clear coat ? There was a lot of overspray or was that just how you felt you had to spray the sata?

@Melchor1990

8 жыл бұрын

As the Asians at my work say. " too mach (much) arrr (air) "

I'm using a sata 5000rp and using 31 psi with sikkens .. at what pressure you guys are you spraying ?? Just saying I been spraying with pressure between 29 to 32 for over 2 years every day with no problems!! Not critical any body here. Just want to know your experience ..

@thistledewoutdoors3331

5 жыл бұрын

I find that Sikkens requires 27+ psi thru the Satas.... Even thru the Iwata LPH400 mid 20s seems to work good.....

What clear were you spraying?

Im just a cabinetmaker, but i do use sata 5000 rp for my finishes , i feel like you way to far from panel ,

@demarques1911

5 жыл бұрын

He most certainly is

What size tip and cap did u have?

Rps are not compliant yet here in US so they must be in Canada. We are xtill waitinv for EPA approval.

@Refinishnetwork

9 жыл бұрын

Troy Knopik oh wow, you mean Canada got something before the US did? sounds crazy.

Just a question, what made you switch from a supplied air to a air purifying respirator? And what is your cartridge changeout schedule for your mask?

@nitolinilo9034

6 жыл бұрын

Jmac 3 years old damn welp I just change em out when it gets hard to breathe or you can smell it, change it

@brainwashingdetergent4128

2 жыл бұрын

These 3M mask are supposed to last 40 hours. Thats not 40 hours of painting thats 40 hours of not being in the ziplock bag provided. If you leave it on the counter out of the bag your 40 hours is ticking away. I put myn in the ziplock bag squeeze all the air out and zip lock it tight. I replace them when i smell the paint and that takes about 4 months. Needless to say thats a whole lot more than 40 hours.

What tip size are you using for both guns, i like your relaxed spray style im a huge fan form philly!!

@Refinishnetwork

9 жыл бұрын

Kevin Gormley Thanks brother, the HVLP for basecoat has a 1.5 (onyx requires a larger tip than most), the RP for clear has a 1.3.

liking the new 5000s mate .

@Refinishnetwork

9 жыл бұрын

Stuart Smalley Ya, they're pretty good. Wish I had more time to spray them.

Awesome video jimmo! ..what psi u have the clear at on the 5000rp ?

@Refinishnetwork

9 жыл бұрын

thakrazyone It was around 27 i think, I'll have to play with it. Not exactly sure the recommendations....perhaps a fact worth knowing lol.

How can I get this for india

That car probably had a shine through the bake cycle! Dead as all hell the next day! Damn application fundamentals are terrible in this video absolutley no way to paint the way he paints and have consitant paint jobs everytime! I promise this guy does allot of buffing or.someone does it for him! Been doing this a while and have some of the best training money can buy amd never in my life has anyone demonstrated the technique this guy uses matter of fact i would be embarrassed for anyone to see me apply my paint in that manner! Not one of those coats are medium wet more like extra dry, he hasnt made one consitant overlap, air pressure definitely too high for the speed and distance of application! Now i am a firm believer that there is more than one way to get too your final product! But there still are basic fundamentals in which he shows no discipline in the technique! Actually reminds me of everyother painter that comes to my shop says they can paint hand them a gun then promptly take it back! Everbody can paint until its actually time too step it up! All paint jobs look better on a camera (ever watch overhaulin then see that same car in real life at a car show! Dont even look like the same car!) All paint jobs shine when they are wet! I guarantee 3 days later that door soaked up to a nice dull shine! This video is one of the reasons our industry has a bad name! If your gonna post instructional videos at least have the the experience and knowledge required to do so instead of misleading your viewers! He makes it look so easy because he is doing it all wrong and u know any glasurit reps that whatch that video cringe when they see that guy applying thier paint like a 2year old learning to paint inbetween the lines! Good luck but a real experienced painter can watch that video for 5 seconds and tell u that guy doesnt j Have the first clue what its really like to be behind the trigger!

@vwpier

6 жыл бұрын

Joseph Blankenship how much pressure are you using you ??

@joshrivera1168

2 жыл бұрын

I use a sata 5000 rp 1.6 everyday to base and clear RVs. They put out a lot of material really fast, probably why he was moving so fast since it was his first time using one. But I do get what your saying about the overlap/speed he was doing was suspect.

are those blend panels just Scotch brited??

@kunalabraham9814

7 жыл бұрын

yeah looks like grey scotch brite. way too shiny.

@moneymac2864

6 жыл бұрын

Its just the angle of the camera...you can see later in the film that everything is sanded properly...and the paint came out flawless

Hi. Hlvp for base coats, rp for clear, right?

@brandonscott8906

5 жыл бұрын

Yes

It looks like he never sprayed before

glassfruit is what us used at Craftsman collition :O

what was the consuption of clear,looks like alot...

@Refinishnetwork

9 жыл бұрын

Bojan Glumac Actually, the material for both the base and clear seemed pretty good!

The metallic on that car is all wrong for some reason the style of his painting bothers me... can't say he's doing it wrong because everyone is different. but just by looking at this video ummm I don't even need to say. u just know..😅 he is adjusting the presser like crazy on both ends?? just set the damn thing at the gun. he is laying more clear in the air then on the car.. But he had me going tho he did looked professional at the first 59sec of the video. 😅😅😅

@demarques1911

5 жыл бұрын

😅😅😅😅😅

2 base all you need even if was in primer with the5000

Not that shinny and glossy unlike others. Maybe because of the base coat, the base coat is not shinny at first thats why the top coat makes it not so glossy

Hola.. a nosotros los dominicanos que somos profesionales en esta profesión técnica, nos gusta se nos valla dando explicasion paso por paso, EJ.. qué línea de pintura estoy usando, que color es este, con cuantas bares de presion estoy cubriendo, con cuantas bares de presión se debe aplicar un tono de cada color y el tipo de materiales lo tanto que influyen en cada una de las aplicaciones, nosotros con esto somos muy exigentes, pues hacer un trabajo profesional con sus explicaciones adecuadas.. son las cosas que se llevan a una página de redes sociales y a la televisión, como también a un curso taller, pues las explicaciones de cómo usar y aplicar cada producto como también el como se deben utilizar las herramientas, conllevan a que una línea oh marca de re acabado automotruz tenga acogida en los diferentes mercados de cada país OJO.. noooo olviden ustedes este hermozo consejo okey

Thanks for the video !

Good job as usual Sata jet 5000 HVLP or RP?

@Refinishnetwork

9 жыл бұрын

Sergio RamosHVLP for basecoat & RP for clear.

@scania161616

6 жыл бұрын

RP 1.3? HVLP 1.4 ? What noozle 1.2 or 1.3 or 1.4 ? I want to buy 5000b for basecoat and clear

Madre mía que mal pinta ese tio

alot of grapefruit peel

first time i've ever heard the word "gunooo"

Hola soy RENY AUTOPAIN de RD.. noooo comparto la idea de pasar un taclop después de aplicar las últimas manos de control en un retoque, esto nooo es correcto dígalo quien lo diga.. éso noooo procede porque esto mueve los metales ohh perlas que calleron secas para que cuándo se aplique el clear oh tramsparente.. estos queden atrapados y la igualación del tono sea Lomas parecido posible, muuuuy cortezmente les saluda RENY MEDRANO

first to say thx, and i learn a good things from your videos, i just hope that some day ill be able to buy spray gun good for job, at the moment im using a sata jet 90 1,3 from the stone age hehehe

Should clarify I mean the new 5000 rps

Very nice

Air pressure way to high on the clear 27 psi and a 1.2 air cap and needle you guys over in the u.s are so far behind than the uk in terms of paint refinish. Dont mean to offend anybody to cheers Wes

@giuseppeagostinelli9642

8 жыл бұрын

He's from Canada. We carry a picture of your queen on our money! 1.2 isnt as popular here yet, but i agree the 1.2 breaks up the clear alot more, leaving a flatter finish.

@Bluestouse86

6 жыл бұрын

May I ask... why a 1.2??? What’s the benefit? If you move fast enough, it lays flat... he was too far from the vehicle for my liking... but it’s all personal preference. I’ve been painting since I was in diapers. 1.2 or 1.5, I can lay it down with anything lol

@woodworkchannel3353

5 жыл бұрын

Bret Bunton 1.2 makes smaller particles so it should lay flatter , almost like mist .in my experience noticeable difference

mala aplicacion y mal proseso de preparado, esas piezas no estan bien matizadas tendra problemas de aderencia y se desprendera la pintura en un tiemo corto

End result is what really matters though in my opinion your air pressure is too high.. sounds like you was at 80-90 psi?.. oh do yourself a health favour bud and get used to wearing air fed full face masks . . end job had that factory orange peel so well done..

@clh9933

5 жыл бұрын

😂

wicked

And you sir... are why us painters have to deal with panels peeling. Your blend panels are way too shiny....

@shakeel7707

7 жыл бұрын

Shane Wanjo

@kunalabraham9814

7 жыл бұрын

yeah Lol looks like it was scuffed with a grey scuff pad. you can use the maroon ones from 3m for blend areas and the clear covers the scratches no problem and its mad easy to scuff with the maroon pads

@MrSnipes1987

5 жыл бұрын

@@kunalabraham9814 obviously you dont paint much.

@MrSnipes1987

5 жыл бұрын

I was thinking that as well. my blend panels are machine sanded with P800 and a grey scotchbrite around the edges. That panel will have low durability.

Wearing mask with no eye protection the car is all protected so should he and all the viewers

opreço dela um devilbiss fas igual que e bem mais barato

cu ce lac dai?

@miller68

7 жыл бұрын

write in English , he won't understand your language...

@flos3435

7 жыл бұрын

They can not, they do not want to respond! :-(

the clearcoat is very bad.

Your painting technique is really bugging me.i have to stop watching.

@3n1fss

5 жыл бұрын

Agrait lopez lol it does seem almost unorthodox. However, it’s his own technique so he probably still does a good job.

@HoldenGuyTL

4 жыл бұрын

Same here 🤣

nieprawidłowo położona baza

@user-zv7hv1zn2o

5 жыл бұрын

?

@8:07 That looks like some "European" orange peel. I guess that paint doesn't flow too well because it certainly couldn't be a lack of proper technique.

DEVILBIS the law with him no oranges

Фуфлыжная покраска!!! Сплошной опыл и перепыл. Удачи на полировке!!!

Просто шикарно!!! Класс!

@1981anestis

4 жыл бұрын

Чего шикарного ты здесь увидел???

very goooooooooooooooooooooooooooooooooooooooooood

Sata jet 5000 rp is win hvlp and orange peel is twin😂😂😂

Sata Rp is overrated creates a room full off overspray.sprays to much product on too.

Overspray much ?😟

@Refinishnetwork

4 жыл бұрын

yes

Sata God gan

This is the punk

Sata i am not impresed by your performance..Super Nova here i come

@MrElPoderozo1

8 жыл бұрын

@ pete ss. Did you get the Iwata Super Nova and if you did how do you like it?

@77petesgarage

8 жыл бұрын

+MrElPoderozo1 yes, and before i did a lot of research on the SuperNova and Sata 5000. I then decided to get the Super Nova Entech with a 1.4 tip with an RTI regulator which was like 50 bucks made in USA(lasted about 2 months then broke) and was giving false readings and was strugglin a bit with the silver metallics. So i decided to buy the Iwata regulator which was almost 70 bucks and the difference was drastic, almost 8-10 psi difference. The silver metallics and golds now spray like a charm. You can spray water or solvent and clear The Entech also atomizes the clear really really good, i never cut and buff. Its definitely an improvement over the LPH 400(i now use my LPH 400 for sealer). if your constantly working on cars or projects its so worth it and a great investment. If u want a the best spray gun dont look at the price look at what the gun does in the long term and performance. The Entech sprays the clear better then WS 400, why?? cause they had the WS400 evo at the school i went to and the Entech lays down the clear better. And if your on a budget save $100 bucks every 2 weeks thats what i did....later dude

👍

Это очень странно)) но моя бабка лучше красит. Правда она технолог в отличии от тебя

@Shamil..

5 жыл бұрын

Черный цвет в стык немогут покрасить))) лол

What the f@ck are you doing painting a door that is glossy as!!! Why are you walking up and down with the clear gun!!! Do you know what are you doing at all mate?

Overspray is ridiculous

Thank God you're not painting one of my cars I would never trust you to your penny over a shiny panel and it doesn't even look like you scuffed it or let me correct that your blending into a shiny front door I'm in pain for 8 years now I'm not saying I'm the best painter in the world but your painting technique and prep work does not look good in my opinion

pfff .... this is the clear coat finish on paint boot ? go to get a job on Mc Donald's .....

Неправилна сначала учи

you have applied for too Far

@jimmyrustled4373

8 жыл бұрын

+Salvatore Brando ..I was think the same thing..carried blend way too far, too heavy. Looked like the blend area ended really abruptly from our angle...for what it is worth, I go about 1/4 way into blend panel with full strength base color, then use one part reduced color, one part slow solvent, one part basemaker/blending clear to thin color and I then take that out another 1/4 panel length or as needed...using a sata 4000b RP 1.2w ... I also have a sata 4000 HVLP 1.3 I use in certain situations and colors

you need more practice :) look nice all and all

I watch this video and all I can think of is how this guy wouldn't last a week painting with us real painters in the RV industry. You have to haul ass and produce a better paint job than this. We use Sata 5000 all the time yawn

@Refinishnetwork

7 жыл бұрын

+Josh Rivera I agree, I probably wouldn't last in the RV industry. I do know a few RV painters, respect!

wet wet

Allocating south of the border comments! Lol

너무 날려 뿌린다..가스 많이 생길꺼 같은데 얼룩도 심하고!