in which I embrace the 21st century. mechanicallumbe...
Жүктеу.....
Пікірлер: 29
@buildstoys5 жыл бұрын
Coming along nice Scott, can't wait for the plans!
@michaeldodson41235 жыл бұрын
I just recently found your website and videos. I’m a retired ME and have been teaching myself Fusion360 for some consulting work so I’m sure you have encountered many of the same frustrations figuring out how to get the CAD right. Anyway, your thought process looks sound. I too am really looking forward to this becoming a product or at least a sound set of plans. Keep at it, you are close.
@Steve_Just_Steve5 жыл бұрын
I hope you haven't given up the channel and all is well with you.
@ScottRumschlag
5 жыл бұрын
Thanks, I haven't given up, just busy with other projects and priorities!
@kevins12425 жыл бұрын
When you put the lights nuts on, it looked like they were taper side out....I know this isn't an automotive application where they should be taper side in...but putting them taper side in in this application would keep the wheel in the same place and run-out consistent. Correct?
@kevins1242
5 жыл бұрын
I guess I jumped the gun and should have watched the whole video
@VencelBiro5 жыл бұрын
This project is really interesting, can't wait for the next episode. I appreciate that you carefully adjust the audio levels in your videos, so the tool noise is still audible but not deafening.
@ScottRumschlag
5 жыл бұрын
Thanks. I do my best, it does seem like there's a bit of weird clipping but it's not present in the original footage. VLC also seems to change the bass level during playback if it's no longer the main window open on the computer . . . which is odd and doesn't give you a lot of confidence when reviewing videos. Next time I'll use something else, or maybe it's a Windows 10 thing . . .
@abdullaahmad8764
5 жыл бұрын
@@ScottRumschlag sir How much digress to bend arms
@ScottRumschlag
5 жыл бұрын
@@abdullaahmad8764 I'm not sure what you mean by digress.
@abdullaahmad8764
5 жыл бұрын
@@ScottRumschlag aney table 8 arms 4 under 4 up side for sliding L type
@vitek88435 жыл бұрын
Чекаю продовження відео
@ewokrider92152 жыл бұрын
Hi Scott, I was just curious if you were still working on this project and also I was thinking. Have you thought about making the table and then disassembling it and shipping all the parts to the buyer? What would that cost? I wouldn't mind putting it all together, I would just have trouble making the boards precise, so I would much rather just buy the pieces from you and then assemble it.
@ScottRumschlag
2 жыл бұрын
The metal mechanism version is on hold, there hasn't been enough interest yet to start building and distributing kits.
@ewokrider9215
2 жыл бұрын
@@ScottRumschlag o man, rats. Okay not a problem, I just really like the concept of a table thats like the Fletcher capstan tables out there. Cheaper of course lol. I really hope that there is more interest in this soon! I will make sure I spread the work over here in these parts!
@vutrinh51344 жыл бұрын
Hi Scott, I want to find suppliers to supply this mechanism. do you know? pls help to support
@deatthcords28935 жыл бұрын
I watch that you have increased the mechanic of your system, but to be completely honest I think that it's excessive.... Just my opinion, I'm designing similar fornitures but, ignore me but, I thing that it could be made with aluminium, did you check the materials resistance with a software? Is a furniture, users what's something light and functional... Best regards, is a pleasure follow your job
@ScottRumschlag
5 жыл бұрын
The previous iteration was mostly aluminum, steel is easier to work with.
@kferk12 жыл бұрын
did you finish the table?
@oswynfaux5 жыл бұрын
Odd but I have no audio on this specific video, restarted browser still no audio, try another video and audio works. EDIT restarted computer still no audio, ???
@Fabsenet
5 жыл бұрын
The audio is fine, it must be a problem on your end. Sorry
@oswynfaux
5 жыл бұрын
Seems I can get the audio if I use speakers, but not through the headphones on this one video.
@tommijii5 жыл бұрын
Oh.. I feel a bit stupid and slow. I thought this was about metal expansion. :D
@tommijii
5 жыл бұрын
Episodes 1. & 2. makes so much more sens now.
@moreilly04 жыл бұрын
Any updates?
@ScottRumschlag
4 жыл бұрын
Still collecting emails of those who are interested, it's not a focus right now though, day job has been busy.
@damianbraga862
4 жыл бұрын
@@ScottRumschlag Hello, how can I get the plans?
@ScottRumschlag
4 жыл бұрын
@@damianbraga862 Send me an email and I'll add you to the list of those interest: scott@mechanicallumber.com
Пікірлер: 29
Coming along nice Scott, can't wait for the plans!
I just recently found your website and videos. I’m a retired ME and have been teaching myself Fusion360 for some consulting work so I’m sure you have encountered many of the same frustrations figuring out how to get the CAD right. Anyway, your thought process looks sound. I too am really looking forward to this becoming a product or at least a sound set of plans. Keep at it, you are close.
I hope you haven't given up the channel and all is well with you.
@ScottRumschlag
5 жыл бұрын
Thanks, I haven't given up, just busy with other projects and priorities!
When you put the lights nuts on, it looked like they were taper side out....I know this isn't an automotive application where they should be taper side in...but putting them taper side in in this application would keep the wheel in the same place and run-out consistent. Correct?
@kevins1242
5 жыл бұрын
I guess I jumped the gun and should have watched the whole video
This project is really interesting, can't wait for the next episode. I appreciate that you carefully adjust the audio levels in your videos, so the tool noise is still audible but not deafening.
@ScottRumschlag
5 жыл бұрын
Thanks. I do my best, it does seem like there's a bit of weird clipping but it's not present in the original footage. VLC also seems to change the bass level during playback if it's no longer the main window open on the computer . . . which is odd and doesn't give you a lot of confidence when reviewing videos. Next time I'll use something else, or maybe it's a Windows 10 thing . . .
@abdullaahmad8764
5 жыл бұрын
@@ScottRumschlag sir How much digress to bend arms
@ScottRumschlag
5 жыл бұрын
@@abdullaahmad8764 I'm not sure what you mean by digress.
@abdullaahmad8764
5 жыл бұрын
@@ScottRumschlag aney table 8 arms 4 under 4 up side for sliding L type
Чекаю продовження відео
Hi Scott, I was just curious if you were still working on this project and also I was thinking. Have you thought about making the table and then disassembling it and shipping all the parts to the buyer? What would that cost? I wouldn't mind putting it all together, I would just have trouble making the boards precise, so I would much rather just buy the pieces from you and then assemble it.
@ScottRumschlag
2 жыл бұрын
The metal mechanism version is on hold, there hasn't been enough interest yet to start building and distributing kits.
@ewokrider9215
2 жыл бұрын
@@ScottRumschlag o man, rats. Okay not a problem, I just really like the concept of a table thats like the Fletcher capstan tables out there. Cheaper of course lol. I really hope that there is more interest in this soon! I will make sure I spread the work over here in these parts!
Hi Scott, I want to find suppliers to supply this mechanism. do you know? pls help to support
I watch that you have increased the mechanic of your system, but to be completely honest I think that it's excessive.... Just my opinion, I'm designing similar fornitures but, ignore me but, I thing that it could be made with aluminium, did you check the materials resistance with a software? Is a furniture, users what's something light and functional... Best regards, is a pleasure follow your job
@ScottRumschlag
5 жыл бұрын
The previous iteration was mostly aluminum, steel is easier to work with.
did you finish the table?
Odd but I have no audio on this specific video, restarted browser still no audio, try another video and audio works. EDIT restarted computer still no audio, ???
@Fabsenet
5 жыл бұрын
The audio is fine, it must be a problem on your end. Sorry
@oswynfaux
5 жыл бұрын
Seems I can get the audio if I use speakers, but not through the headphones on this one video.
Oh.. I feel a bit stupid and slow. I thought this was about metal expansion. :D
@tommijii
5 жыл бұрын
Episodes 1. & 2. makes so much more sens now.
Any updates?
@ScottRumschlag
4 жыл бұрын
Still collecting emails of those who are interested, it's not a focus right now though, day job has been busy.
@damianbraga862
4 жыл бұрын
@@ScottRumschlag Hello, how can I get the plans?
@ScottRumschlag
4 жыл бұрын
@@damianbraga862 Send me an email and I'll add you to the list of those interest: scott@mechanicallumber.com