I really cannot begin to explain just how helpful this was whilst putting up my dad's shed. Thank you so much

For me, the ideas in kzread.infoUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

@ericboucher799

Ай бұрын

That’s a lot of likes for an advertisement

Thank you without your help we couldn't have erected the shed your instructions were so clear much better than the instruction booklet 👍

I really appreciate this video tutorial. The instruction book, other videos and this one was great! Thanks for sharing it.

Thank you for the great instructions. A complete lifesaver!

Thank you a million. As the other folks said the instructions are horrific. Will start building it tomorrow . Now I have an idea what to do 🥳

You guys are the only ones who visually show each step clearly! With the other videos, the parts are suddenly & magically there without seeing how it got there, lol! Anyway, Thank You🌹!!!

Magnifico video. Tengo que montar una caseta casi igual y sus explicaciones serán de gran ayuda. Muchas gracias

Is the slightly raised OSB boards sufficient to prevent condensation inside the shed due to the concrete underneath being wet, presumably not having a Damp Proof Membrane underneath? Also worth pointing out that the base should be sealed along the bottom (before fixing to the concrete) to prevent water seeping in at the bottom

Cracking video, and a good storage shed as well. Thanks

Thx u so much, I am having a hard time with the beams, I'ma keep watching until I get it

Thank you for making this video, we.d still be tryna build the shed (from another seller) the instructions were hopeless

This video was exactly what I needed! We got our shed second-hand with no instructions at all. Not even sure what brand or model it is. But your video instructions were perfect, and we successfully assembled our shed.

Hi thanks a lot for this high Colette video you are really life saver .👌🏻👍🏻

You guys saved my ass. And prob my wedding😂😂😂

thankyou for this video- if i had went by the instructions , i would still be there in 2050 doing it

@lolbrown1970

3 жыл бұрын

damn !! i would be 80

What's best flooring for comfortable heat and avoid mould, damp and water residue/dripping... What can I put on wallsand roof to keep warm and dry? Best amount of vents in the shed?

Thank you for the video. The instructions provided were written in Martian.

@chapina1492

3 жыл бұрын

👽😂

@deedub577

7 күн бұрын

I’m trying to erect this I wish I’d studied Martian at school The video is helpful

Thanks for the tutorial, much better than the silent one with the canned folk music. I like the way you used the needle noses to hold the nut. If only someone would invent a tool specifically for that purpose...... A sort of screwdriver for nuts or "nut-driver" (for lack of a better word) 😅

Bonjour, merci pour cette vidéo qui m'a bien aidé ! 🙂

What if you have slabs and not a concrete base, is it suitable to drill in to them to anchor the base?

I wish I'd watched this a few hours ago. Now I can spend an hour tomorrow morning undoing my mistakes then finish building it properly. (In my defense the instructions provided with the shed are appalling) Thanks for the upload, it's brilliantly clear.

@mujahidali4808

5 жыл бұрын

For real man the instructions r so unclear and lead to so many mistakes

@josiesheppard8268

3 жыл бұрын

I agree with you both built ours yesterday and the end holes on the roof didn’t seem to line up with the metal frame arghhh

Thanks you for this video

Just wondering if I can use a piece of chipboard word or something similar as the base as I don't have a concrete base just compacted stone.

Wow! Just what I needed! Thanks a lot for this high quality video. Just bought this shed and didn't quite understand where to start. :)

@ifracing

2 жыл бұрын

Hello mate, i just ordered this shed too, i see you commented 3 years ago! Hows the shed holding up? And please be honest 😂

@oferasis1

2 жыл бұрын

@@ifracing Hi mate, the shed is still in one peace and holding very good. Honestly!!!

@ifracing

2 жыл бұрын

@@oferasis1 thank you

Thank you so much for this - the instructions that came with the shed were awful!

I've just ordered a metal shed (Different Model) as the one I got also has a metal bottom fram like this one, is it ok to put wood on top When it's just on a concrete base like in the video? That's what I'm planning to do. Any advice will be great thanks.

@iLikeSheds

2 жыл бұрын

Hello, thank you for your comment. As long as the concrete base is flat and level, you would be able to put a wooden base on the concrete. We would recommend that the wood is on bearers to elevate the base slightly and allow airflow underneath to prevent issues with rot or mould in the wood. We hope this helps - N

3 hours between 2 people yeah right! Believe me unless you have built this one on numerous occasions you will be lucky to get it done in 5-6 hours and that’s a big if allow yourself and a friend 8 hours minimum

@desquinn3834

3 жыл бұрын

Interesting fact about this shed, remember the story of the 3 little pigs? it was actually meant to be the 4 Little Pigs, but the 4th younger pig built his house using one of these cheap Chinese sheds and the the wolf had him eaten before he had it assembled, obviously not suitable for children so they cut the story to the 3 Little Pigs, not to the mention the part about the wolf farting and blowing what the misfortune of a pig had managed to assembly a mile down the road leaving a large gaping hole in Little Red Riding Hood's head.

@PCongeries

Ай бұрын

Even that .... autumn winds and your Chines building will flay away to next country

I guess it’s good to have a go.

we have one that includes funny looking runners for the doors and its not clear how these fit. Any help would be appreciated.

I’ve just done one of these and what a nightmare working from the manual, I’ve completed it and all is fine until I close the doors! There is a gap at the bottom, if I hold them closed all is fine, and I guess if a padlock is in place all is ok, depending on the type of padlock, any suggestions?

What were the measurements of the plywood?

How do the shed walls fix to the bottom of the body? I have the small shed with log storage and I don't know how the side panels attach to the bottom

anyone else had issues with the back and side wall panels? Each panel has like a flat edge and a cornered edge so the one can overlap the other and prevent water coming in. There is no other way to mount them on the base frame bc of the predrilled holes. So now the back side has flat edges on both back panels, and the side panels both have cornered edges. For the side panels it doesnt matter but for the back you now have to connect 2 panels on that flat edge and thus water can come in. its just stupid!

That looks like it would be easier to get the avengers to assemble 😬

Really clear, effective guide. Thank you!

Started building my today with 2 helpers 6 hrs later still not complete The Instructions are not very clear, we also watched the video and stil couldnt fathom out some of the instructions .... We go again tomorrow to try and do the roof and doors. You need plenty of Patience (which i dont have)

@thanananmasessa9739

2 жыл бұрын

Read your comments I think I better pay 500$ cost for someone to install for us

@michelleclarkson4039

Жыл бұрын

I’m with you on this. Full day on Saturday and an hour out tonight and do you think I know how to put the bars up for the doors because the parts I gave don’t have holes for screwing it up…. Argh!!!!

@brizaldolichtie

Жыл бұрын

@@michelleclarkson4039 took me 2 days to figure out the way the bars for doors went.

You had professional screwdriver and protective gloves, but no wrench :) LOL

Why can't you fit the floor frame before erecting the out pieces?

The holes NEVER align the screw's EVER LOOL. But great bit of kit :-)

Anyone know where I can order the plastic corner connectors?

My shed only got two angled roof panels with cut out for vents not 4 like your one

Why not use a Spanner to hold the Nuts ? Much easier than Pliers.

@putridfenrir8508

2 жыл бұрын

Easier to hold pliers dead on than a spanner parallel to the walls

Thanks guys

Nice

Thanks for the video it helped me a lot because the instructions in the carton or not clear. The problem is the product I think they could do it much simple and they should for example assemble the door already in the factory. The edges are very sharp and you cannot have the gloves always because you don’t feel the little pieces ( screws and other little parts) in your hands and with your fingers. If I knew I would buy the same thing but in wood maybe or another ecological material because it this product is using very poor materials and too difficult to assemble.

Visit www.ilikesheds.com/ for more information.

@daveenglish2

3 жыл бұрын

Rip off prices. Avoid like the plague. You will get better bucks for your money by going elsewhere.

How long did this take 2 people to do?

Designer of this product and engineering design need more studying simple design assembly....

@azersamaali2016

3 жыл бұрын

Winner of a video, been searching for "how many foundation piers are needed?" for a while now, and I think this has helped. Ever heard of - Damkietor Nonpareil Dominion - (search on google ) ? It is an awesome one of a kind guide for building better sheds and woodworking minus the normal expense. Ive heard some amazing things about it and my mate got cool results with it.

Can anyone tell me what size this shed is?. 4x6 foot?. Would love to know if it's easy to get a bike. In and out of that with the sliding door size.?

@76ivonneastrid

3 жыл бұрын

Dont waste your $ is horribly tough to put this puzzle together all water came in

👍👍👍👍👍

So maybe I'm missing something? Why would you not build the base totally before you put the walls up? It makes more sense to because you can square it, Level it and not fight putting the lumber through the doors? Anyone know why it wouldn't work?

@edgaraskundrotas5562

2 жыл бұрын

Hey I build these shed for a living 10 to 20 a week and that exactly what I do every time. I build the base with the floor kit and then put the plywood on before I attached the sheets. This stops the sheets from falling so you don't need someone holding them as you are screwing them in the frame. Provided no wind

@vlratcliffe1

Жыл бұрын

Hi how donyou stop all the rain leaking in to the shed .thanks

How much do you charge me to install my one I already got the same shed

Those panel are so thin they bend when put screws, so much bad quality and not support at the middle for bad weather

@lydiaanderson0083

Жыл бұрын

@hello Romy Gime how are you doing?

Use a Phillips-Bit and not a Pozidrive-Bit. The work is easier.

How much does the 6 ft x 4 ft shed cost ?

@76ivonneastrid

3 жыл бұрын

Please dont buy it is flimsy a headache n not worth your money.ni spentv$100 on insulation foam n 2 solar fans

Metal? Looks like paper to me

@nicolaspadron7511

3 жыл бұрын

Great video content! Excuse me for chiming in, I would love your initial thoughts. Have you ever tried - Mahorrla Wooden Paradise Method (should be on google have a look)? It is an awesome one off product for building better sheds and woodworking without the hard work. Ive heard some unbelievable things about it and my friend Sam at last got amazing success with it.

@daveenglish2

3 жыл бұрын

@@nicolaspadron7511 Yes, it's crap. Avoid at all costs.

Well where do I start with this 1 🤔🤔🤔 o yes . Horrific . Spent 2 days with 3 people trying Yes trying to build this bearing in mind I’m an Ex royal engineer . This was just totally shite . Took it down and sent it back ., and it was there 14x 11 . Never Ever again. Sorry Billy oh .

@lydiaanderson0083

Жыл бұрын

@Hello Russ Woody how are you doing

It needs more stability and screwed to the ground . A gust of wind will take it out .robbery

@user-of3hw5zc5p

2 ай бұрын

if you payed attention you can see they anchored it to the ground

what's the best way to lock the shed securely

@iLikeSheds

2 жыл бұрын

Metal sheds come with holes in the handles which a padlock can be put through to secure the shed. I hope this helps! - Natalie

@Paul-mm9bq

2 жыл бұрын

@@iLikeSheds thanks for your reply but if I lock the handles together this makes no affect because you can slide the both doors to either the far left or far right .

@iLikeSheds

2 жыл бұрын

@@Paul-mm9bq If the doors are on the runners correctly, it will not be possible to completely slide the doors to either side and therefore the doors will be secured - Natalie

@johnmorris8194

2 жыл бұрын

buy a asgard shed

To many parts, and you need concrete base

Golly that was complicated

@SctonThrtn

4 жыл бұрын

How long did it take you?

@debbievidal9536

4 жыл бұрын

@@SctonThrtn no idea. I bought one 6 weeks ago and still haven't assembled it ☹️

@SctonThrtn

4 жыл бұрын

@@debbievidal9536 mines being delivered today and wondering if I could do it in a day if I start early?

@debbievidal9536

4 жыл бұрын

@@SctonThrtn I don't know.you need 2 people. Can't do it on a windy day either. Have t done mine yet as I live in the Mediterranean and it's been far too hot......it's bloody raining today

@josiesheppard8268

3 жыл бұрын

S3ct1on Th1rt33n yes can be done in one day I did it in 7 hours lol 😂

Само вятъра ме притеснява, че това нещо изглежда толкова леко, че не знам какво би я задържал на земята

Kan de beschrijving in nederlaNds

I ordered a 4x6 shed. It only measured 4x5. the metal is so thin. very disappointed with this shed

Thank you my instructions made no sense

This is a Lego for adults. £265 price of this paper metal shed on Wayfair but please don't buy this horrible metal box. This shed should come with a little guy for installation. 2 people job and 6 hours of hard labour ... not joking, next time when someone calls me to install this type of shed I will charge X2 the price of the shed. 1000 screws and the holes are not aligned properly.

Lenguaje español

It seems unprofessional to see nuts held with pliers. However, damn it, use a socket wrench or a wrench.

Chines ... beeep ...beeeep ....beeep :D

I will advised you please don’t do it you will be disappointed ☹️ if you can return it do it as fast as you can this product is nothing but garbage 🗑 I’m very handy when it comes to problems like this shed main problem should be done with one person no two but the engineers never thought about this little issue so the rest of problems are due to lock of imagination

after watching this i change my mind - not worth it!! one karate kick will destroy this crap permanently!!

Kind of a two man job :(

This type of shed should be permanently banned wherever they want to sell it. THIS IS ONE PIEC OF RUBBISH. DESIGNER OF THIS SHOULD BE FIRED!

@michaelstanley3961

Жыл бұрын

Had mine up for 5 years no problems 🤔

@maxi-me

Жыл бұрын

If what you say is true, is that really enough for such an atrocity? Maybe his license and privileges should be taken away and forced to pay restitution to everyone he has harmed.; his children and children's children should be shunned by society and must agree to verbally rebuke him to even purchase basic necessities. The headstones of his ancestors should be removed and their grave plots left unattended to. We should also forbid his name to be uttered and place a prohibition on giving an infant the name. Those that presently share the name shall be given new identity and if the name is insinuated the speaker shall follow up by spitting. That enough?

@subtalkformer

5 ай бұрын

Agreed... I've just had to fix up a £500+ outsunny ! For this price they could of put an electric screwdriver in with that pack but no! The shed is structurally weak it could be cut with a tin opener with ease. Also had to work on unleveled ground 😭

@sarahmeszaros6501

2 ай бұрын

😂​@@maxi-me

This video is no good what so ever

what a rip-off. a tin shed so thin you can almost see through it. it.s a joke out of a Christmas cracker. people are so gullible these days. these sheds are cold wet and noisy Metal shed used to be three times as thick, you could use them as bomb shelters and a fraction of the price. I will never buy another one of these pretty painted lumps of scrap ever again.