I just got the Meross garage door opener, came to youtube to find an install vid, and was thrilled to have one where Ryan Reynolds walk me through the process😁

@santiagodavila1426

3 ай бұрын

Bruh 🤣🤣🤣

@kaylematye

3 ай бұрын

So true. Thank you Ryan Reynolds for the DIY walkthrough!

Thank you very much for this video. This increased my confidence. watching comments on Amazon... lot of buyers scared a heck lot saying they need to solder the wires and all....I will give it a shot this weekend.

“Wires go zap and zap hurts” truer words have never been spoken

Thanks for the video! You convinced me to buy one myself. For what it’s worth, the second set of wires goes to the safety sensors at the bottom of the door. I have a similar setup and was able to trace one set of wires there.

I came here for the Meross install, but was super excited to see an Insight. I miss mine 😢

i feel like this tutorial was made by Ryan Reynolds...

You sound like Ryan Reynolds…DIY Deadpool

i had the same problem with the wires but now it works thanks

Great job 👏 thanks for the video

Thank you sir

Thanks for the tutorial. A lot easier to follow than the directions but I have a tendency not to follow. Sprinkle in the humor and you’ve got a subscriber DIY.

Lol Just searching for reviews, found this and was thinking ...why does this guy seem familiar....then I was wondering if I watched your third gen videos and AHAH ...after scrolling way back years and years ago found them. Lol.

@JRobling

Ай бұрын

Great that are worked your way back around

I want to install this on a gate but wondering how this will work in terms of power as there isn't a socket inside the motor casing. Any ideas?

Hi there !!! Does this kit work with Sabutom Sbm?

How do you add the accessory to mg-100 the four buttons controller

Anyone have any ideas why my opener not moving when I jump the white n red ? This is preventing me to install this wireless opener

How to connect with nice robus 600?

is it possible to extend the sensor wire? and in that case what kind of wire would be needed?

@darshan.sk37

10 ай бұрын

Yes you can by splicing it. Use an 18 AWG wire and you should be fine. Although that wire looks quite long already.

So the existing remote still work alongside the new smart garage plug?

@stha006work5

Жыл бұрын

Yes

If i put this in the house, does everyone that have the app get notified if a garage opens?

Can you completely shut off the garage door and also turn it back on that way it will never open for anyone unless you activate again?

@peachparee7647

7 ай бұрын

Have you found a solution for this yet? I can't imagine what could really manage doing this other than maybe a wifi outlet. Normally Alexa's security pin should be enough

@henrytom5824

7 ай бұрын

@@peachparee7647 I haven’t figured it out yet don’t think it’s possible. Been looking to get an smart plug and Incase it in some kind of cover it can’t be easily touched and unplugged. I’m not sure yet though if the smart plug can still stay on even if it looses WiFi connectivity. Will have to try myselfe as this would be the only option for me other than the Nero’s but not sure if does what we asked above.

@peachparee7647

7 ай бұрын

@@henrytom5824 Wifi plugs disconnected from the internet will stay on and have a normal functioning on/off button still :) It sounds like you'd want a smart in-wall outlet tho. Lol I looked it up and someone on Amazon got one and also put an "extra duty" outlet cover lock on top of it. Looks like you and that person share the same idea

If you have an ADT system, I would bet that's where the other set of wires go to open and close it..

Can i just not connect the sensors as I dont care about the feedback when gate is open\closed .. i just need to use the app to operate it !!!

@History_etc

5 ай бұрын

I don't have this device installed, so I guess the problem is: Without the sensor, the app won't be able to tell you whether your garage door is open or closed. It is fine if you have a camera that can tell you otherwise.

Is wifi needed? My garage is further away from the house and there is no internet reaching there

@JRobling

9 ай бұрын

Required

Did you get the msg200 or msg200HK?

@Bleudejade

10 ай бұрын

This is the MSG100. The only difference is that the MSG100HK works with Apple Home Kit.

Very interesting lyrics.😂

Easy as pie... But much simpler than raspberry pi.

The My Q is a lot easier to set up.

@lakermark2006

Жыл бұрын

after research, My Q maybe easier to setup (which is debatable), you get a lot less value. i'd rather spend slightly more to get way more functionality (IE, auto-close after a set period of time and integration with google assistant).

@syoung20001

10 ай бұрын

They don’t sell the bridge that’s required for HomeKit anymore.

My Fake tesla😂😂