not sure if u a merc registered garage but great video------------i got my part myself at his request and got it wholesale as i do electrical wortk 4 suppliers-i not a mechanic but have a snap on scanner which told me fault before i took it to a guy locally-never used him before-he does jobs after work and has a lift in his garage---------left it at 6-collected at 8.30-told me it was a big job---not according to your video-----i asked what do i owe u--------£150 but 4 cash £140 will do--felt it was steep----------my normal guy was off due to death in family-i asked him this morning how much to change the nox sensor and clear codes and run a full scan (yes i could scan it myself)-he studied for a minute said it was a pretty simple job-------£50 all in-i rest my case

Lovely set of leaves under the hood

great video. I have a mercedes c class w205 2015 year, c 250 diesel. I cleaned the adblue injector . he turned on the check engine light. p220162 The NOx sensor (cylinder bank 1) has a malfunction. The Signal Cimparmision is Faulty. when I clear the error it is gone for 20-30 days or 50-60 kilometers and then it appears again. how do I know which sensor it is, upper or lower, what should I do?

Hi if driving with this not working. What other sensors can get damaged? Around a year I have driven its it not working.

Hi . I have same problem i guess . Just the amber engine light came on and obd2 checked it says p229f nox sensor bank 1 sensor 2. Will change the sensor only solve the problem?

Whats the name of the tool to loose the sensor?

How much should it cost to replace it?

Hi. Great video. I have a P2000 error code. Nox trap efficiency below threshold. Is that for the Nox sensor? Does it need replacing? Thanks.

i have a 2015 mercedes w212 e400 (petrol) with NOX sensor issues (both needs replacing), can i just map them out? is it ok to drive with this issue? my country doesnt have any emission controls etc...

@MoesKeckeEcke

4 ай бұрын

as there are many people deactivating adblue it should be okay... Maybe you need adblue decoded by professional because it might enter limpmode and drive not fast any more that would be shit

Is this the same on a mercedes-benz vito 2017. I have someone who fitted it but he did not have the software to do that. I bought thr sensor from Mercedes-Benz. I had adblue malfunction message come up and then it said emp op in 490 miles first amd then the sensor was changed but the message did not go away

@bazmeredith

9 ай бұрын

They do need reprogramming to vehicle, and also it may have underlying faults

@ArshadAli-xe4bc

9 ай бұрын

Can anyone program them or do you need to go to main dealer

I have a mercedes-benz vito 2017 and I have replaced one nox sensor 1 and got it programmed but then the nox 2 failed so got it changed but do you have to get it programmed eg learn and rest again or does it have to be programmed it again because ir the second nox sensor. I was told by the mercedes when I bought the part.

@Davoodoox1

4 ай бұрын

It has to be programmed. The aliexpress ones never work. The sensors cost 1000€ each. It is a scam.

I replaced it to my W177 but the engine light is still on, the nox was not original, maybe for not being original it’s till on ?

@selimademaj

2 ай бұрын

I did the same as you, replaced the Nox sensor not being original but I think it needs a strong computer to restart the settings of the vehicle so the car understands the new sensor 😢

@gestivlore7835

2 ай бұрын

@@selimademaj ja kam ber tek benzi restartin por prap e ka nxjerr, her e heq her e nxjerr prap shenjen…

@selimademaj

2 ай бұрын

@@gestivlore7835 mos ndoshta ka noj shkputje teli! Para se tja nderroja sensorin ja fshija vet codin me ane te nje kompjutri te vogel qe kam por i dilte prap drita e motorrit! Tani qe ja kam vu sensor te ri drita rri ndezur nuk hiqet fare dhe me kan the kta te servisit qe duhet kompjuter i fuqishem qe ti bej restart dhe ta njof makina sensorin e ri qe i kam ven! Ma ka Ça trapin me te then te drejten. Te pershendes uroj qe ta rregullosh, edhe per mu ky eshte benzi fundit ma ka prish shume me kto sensorat

What’s the tool you used to clear the code at the end

@JAZ.80

5 ай бұрын

x2

@BionicRusty

Ай бұрын

Most OBDll readers will do this. I have a Streetwize one which I bought from Euro Car Parts. It cleared the code fine. The reader may say to do it with ‘Key Off’ but it always does and clears it anyway.

Thanks for the great video. I think I have the same problem with my E class. If I want to do a DIY job myself, do you mind telling me which OBD tool are you using? THanks

@bazmeredith

11 ай бұрын

I'm using a launch euro tab 3

what diagnostic tool was that

@getshrekt9023

5 ай бұрын

Launch x431

Mercedes must love these failures, they quoted me 1k just to get it replaced.... what a scam

@k1shn590

2 ай бұрын

What did you do instead?

@MoreelFilms

2 ай бұрын

@@k1shn590 i got a nox sensor delete instead, i got a c200 petrol so it would not affect it.

@Turururu598

Ай бұрын

​@@MoreelFilms how to do it and what is the cost? Does it affect mot or anything?

Why are the new nox sensors different make and make in chz not Germany look skinnier and not a proper made in Germany .

@sekainiheiwa3650

7 ай бұрын

they are made by siemens and vitesco all over the world cz,de, india, china ,usa , but all sensors made by ngk ntk japan, no one needs to replace entire nox sensor, only the sensor which can be soldered to your old ecu and you have once again oem sensor in your car! They talk about green world to you .... these hypocrites

My local garage quoting me £700 for what looks like 15 minutes work. Not happy.

@bazmeredith

Жыл бұрын

The components are the dearest part and the correct diagnosis of one... 700 is a fair price

@itsmemarkt

Жыл бұрын

@@bazmeredith nah. It’s a rip off and your video has opened my eyes and probably many others to exactly why.

@bazmeredith

Жыл бұрын

@@itsmemarkt elaborate why it's a rip off please

@itsmemarkt

Жыл бұрын

@@bazmeredith why don’t you elaborate on how you think £700 breaks down. Genuinely interested to know.

@JordanDavis-tt2uc

Жыл бұрын

Diagnostic charge say £100 part cost £475 hours labour to fit 75 consumables charge. Also rember your paying for someone's knowledge tools building rates so yeah 700 is a complete fair price.