Mercedes Engineer Mistake on 2014 and 2015 sprinters DPF bracket flexible exhaust pipe

Mercedes Engineer Mistake on 2014 and 2015 sprinters DPF bracket flexible exhaust pipe

Пікірлер: 14

  • @cjg7346
    @cjg73466 ай бұрын

    Just had that break on me. Will go ahead and buy a new bracket with 2 hole and put it in. 2015 4cyl diesel at 74k miles.(

  • @glasdavis6228
    @glasdavis62282 ай бұрын

    I live in South Florida. Where can I go and get this Muffler Rebuild because I have the same problem. And the dealer wants to sell me a new piece for$4700.

  • @gnormanhayes
    @gnormanhayes2 жыл бұрын

    Tons of stuff like this on my Sprinter should be Factory recall but they won't instead they want to charge you more than what the bands Worth to fix it

  • @moneypitvan6378
    @moneypitvan63782 жыл бұрын

    The original one has 2 holes, does the 2014 Sprinter have 4 mounting points for the new bracket with 4 holes? Or does something else have to be modified to install it?

  • @christophS2468

    @christophS2468

    Жыл бұрын

    Yes -- the bolt holes exist already. The forward extra hole has a bolt in it and the extra rearward hole requires you to obtain an extra bolt.

  • @SprinterRepair

    @SprinterRepair

    Жыл бұрын

    yes

  • @danieljanssen5592
    @danieljanssen5592 Жыл бұрын

    Do you have a part number?

  • @SprinterRepair

    @SprinterRepair

    Жыл бұрын

    yes

  • @anatoliyivlev9112
    @anatoliyivlev91123 жыл бұрын

    Поделитесь ссылкой на эту запчасть пожалуйста

  • @SprinterRepair

    @SprinterRepair

    Жыл бұрын

    kzread.info/dash/bejne/pWyfpJSDZJbKadY.html&lc=Ugz8Ev-0gW7dA4PZrEp4AaABAg&ab_channel=SprinterService%26Repair

  • @gnormanhayes
    @gnormanhayes2 жыл бұрын

    2011 3.0 Sprinter similar problem with exhaust bracket it's broken on all of them should be a factory recall instead Mercedes wants to bend you over on a factory defective part

  • @stuartchapman5171

    @stuartchapman5171

    7 ай бұрын

    Also on so many modern deisel engines, including many Mercedes and Volkswagons is Black Death, exhaust and partially burn fuel fumes, blowing past injector seating copper washer. This should be a recall. Why? Because any old deisel fitter like me knows, all injectors had two lugs on them, with a 1/2" or 13mm stud, threaded into the block, on either side, which held the injector, under massive compression, securely. Now they have one 6 or M8 stretch bolt holding a V shaped clamp, at an angle pushing it to one side constantly. This has a much higher chance of failing, and it does, a lot. Sometimes you can just change the washer, if you're lucky, sometimes it will have score a line in thd head needing to be recut, not cheap. If you're really unlucky, it'll be too deep to be repaired, Black Death. All the while poisoning you. Like I said it should be a recall, cheap, nasty, dangerous, expensive and toxic design flaw.

  • @gnormanhayes
    @gnormanhayes2 жыл бұрын

    $7,000 for maintenance that's not fixing anything

  • @SprinterRepair

    @SprinterRepair

    Жыл бұрын

    7000?