Mercedes-Benz C-Class W205 Rear View Camera install

If you install the YEEHUNG Android screen, you can install a dedicated rear view camera for it. AHD 1080P 30FPS HD video;
parameter:
Operating voltage: DC 12V
Video line length: 500CM
Video format: AHD 30FPS
Waterproof level: IP67
Camera angle: 120 degrees
Resolution: 1920*1080P
Sensor: CMOS
Operating temperature: -20 to+70 degrees Celsius
Notice:
It does not support the original car display; only the rear-mounted Android display.
YEEHUNG android display purchase link:
www.amazon.com/dp/B09SCKCJD2?...
Reversing camera purchase link:
www.amazon.com/dp/B09TF1WJR6?...
If you have any questions, please contact our after-sales technical department:
service@yeehung.cn

Пікірлер: 37

  • @DunduOGF
    @DunduOGF2 жыл бұрын

    Very thanks!

  • @pempcar

    @pempcar

    2 жыл бұрын

    thanks

  • @aliislam580
    @aliislam580 Жыл бұрын

    wow 🤩

  • @qasimhussain8489
    @qasimhussain84897 ай бұрын

    Anyone know where the camera control module is location ??

  • @joseluisrodrigueztorres4491
    @joseluisrodrigueztorres44912 жыл бұрын

    Me gustaría saber que año es el carro, quiero instalarla en un 2015 o si tienes vídeo haciéndolo con uno 2015 c300

  • @pempcar

    @pempcar

    2 жыл бұрын

    Sí, es un Mercedes W205 2015-2018.

  • @stintflamez6417
    @stintflamez64172 жыл бұрын

    I have the original oem mercedes 360 camera system. I chose in settings oem camera. Its only working for backwards. When i go to forward it changes the screen for 1 second and go back to main menu. I didnt connect any camera cables, pls help

  • @pempcar

    @pempcar

    2 жыл бұрын

    Dear, pls contact our after-sales team(service@yeehung.cn), send you new software update. thanks

  • @kalaiselvan3956
    @kalaiselvan3956 Жыл бұрын

    Where did u connect the power cable ? did u pull from the front console ? or u tap it from the reverse light ?

  • @pempcar

    @pempcar

    Жыл бұрын

    Its power cord is connected from the side of the Android screen, and it does not need to be connected to the power supply from the reversing light.

  • @Jasonphannn

    @Jasonphannn

    Жыл бұрын

    Power cord as in the “camera + 12v” red cord?

  • @ArthArmani
    @ArthArmani8 ай бұрын

    I bought 2016 c class coupe AMG, and it doesn't have a reverse camera, how can that be?

  • @spookydokii

    @spookydokii

    7 ай бұрын

    i guess they only required camera to have a rear view after 2018 lol before that it was optional, same prob as you tho lol

  • @Ahmad-zh9sn
    @Ahmad-zh9sn Жыл бұрын

    The link you have listed is for a front camera can u plz provide a link for the reverse camera

  • @pempcar

    @pempcar

    Жыл бұрын

    The ASIN for the rear camera is:B09TF1WJR6 The warehouse is out of stock now.

  • @leabasket4382
    @leabasket43822 жыл бұрын

    What is reason that you dont connect yellow and red cabel in trunk to each other? Dont you have to connect to reversing stop?

  • @pempcar

    @pempcar

    2 жыл бұрын

    Because the reversing signal comes from the data check in CANBUS, when YeeHung Android detects that there is a reversing signal in the CAN data, it will supply power to the camera (out of camera +12v), and switch the display to the reversing video.

  • @leabasket4382

    @leabasket4382

    2 жыл бұрын

    @@pempcar i want to install to original screen of mercedes cla 2014. Then i have to connect to reverse light i think?

  • @pempcar

    @pempcar

    2 жыл бұрын

    @@leabasket4382 No need, YeeHung will check the back up car signal from the can data.

  • @Jasonphannn

    @Jasonphannn

    Жыл бұрын

    In factory setting > vehicle > collect CAN Bus data. Is this where I set the CAN bus settings? I tried both methods and even tapped in the reverse backup wire and my camera is still not working.

  • @kidsgames745
    @kidsgames7458 ай бұрын

    Is it possible for the old small screen 2015-2018? Because my orignal screen is smaller than yours

  • @pempcar

    @pempcar

    8 ай бұрын

    This Camera only support the Android screen, YEEHUNG NTG 5.0 android screen is compatible with your car.

  • @kidsgames745

    @kidsgames745

    8 ай бұрын

    If I want just to install the camera without android screen what do I need for that? Interface..etc

  • @pempcar

    @pempcar

    8 ай бұрын

    @@kidsgames745 Sorry, the Camera can not work with the oem screen, Because its video input interface is different from the OEM display interface.

  • @StrougeOli
    @StrougeOli Жыл бұрын

    What do I do with the black cable?

  • @pempcar

    @pempcar

    Жыл бұрын

    Yes, you need hide it.

  • @StrougeOli

    @StrougeOli

    Жыл бұрын

    I have connected everything as it is in the video, I have the same radio system but when I put the car to reverse it doesn’t give me any image

  • @abodygh5484

    @abodygh5484

    Жыл бұрын

    @@StrougeOli change the camera settings from your android screen

  • @pempcar

    @pempcar

    Жыл бұрын

    ​ @StrougeOli You need to connect the power cable of the camera judgment, to the Android harness marked with reverse camera power cable. If it still can't be solved, please send your purchase order number to our after-sales service team ;at: service@yeehung.cn

  • @Jasonphannn

    @Jasonphannn

    Жыл бұрын

    @@StrougeOli did you ever figure this out? I am having the same issue with the camera not working.

  • @Element-mq3ez
    @Element-mq3ezАй бұрын

    11:35 i See the Black ground cable. U just leave it? Is That Safe?

  • @pempcar

    @pempcar

    Ай бұрын

    This ground wire should have been taped over. Thank you for your fine advice.

  • @Element-mq3ez

    @Element-mq3ez

    Ай бұрын

    @@pempcar ok but u dont have to connect it?

  • @pempcar

    @pempcar

    Ай бұрын

    @@Element-mq3ez Yes, because the yellow video housing is the ground wire.

  • @Element-mq3ez

    @Element-mq3ez

    Ай бұрын

    @@pempcar thank you!