Melton Student experience with the training process
Ойын-сауық
Anyone interested in becoming a Melton flatbeder please reach out to me via email at
50Plustruckertalk@Gmail.com.
Open the link below to inquire about positions at Melton
intelliapp.driverapponline.co...
A few of my favorite flatbed tools
Coil Protector
www.myteeproducts.com/heavy-d...
Edge Protector
www.myteeproducts.com/corner-...
This just made Flatbed EASIER!!
Joplin Tarp Co. (417) 825-1217
Open the link below to inquire about positions at Swift
tapit.us/W6AHZk
For Swifty use Driver code HENLAR
Follow me on Twitter @50trucker
If you’re looking for a real truckers journey with no drama, this is a channel for you. We will take a look into the life of a truck drivers day to day routine‘s and learn how to perform daily tasks of a truck driver. Again we don’t do drama on this channel so if that’s what you’re about move on but a little bit of education and a lot of trash talking with a lot of laughter is what we’re about
contact 50 Plus: 50plustruckertalk@gmail.com
Anyone interested in becoming a Melton flatbeder please reach out to me via email at
50Plustruckertalk@Gmail.com.
Open the link below to inquire about positions at Melton
apply.rcdl.us/refer/rk5WAdjJZ... Student winter driving tip Q&A
Melton student drivers Secrets to successful training.
Open the link below to inquire about positions at Melton
apply.rcdl.us/refer/rk5WAdjJZ... Driver learning log editing
Anyone interested in becoming a Melton flatbeder please reach out to me via email at
50Plustruckertalk@Gmail.com.
Open the link below to inquire about positions at Melton
apply.rcdl.us/refer/rk5WAdjJZ... New driver Flatbeding X-Strapping and HUNTING 🤪
Anyone interested in becoming a Melton flatbeder please reach out to me via email at
50Plustruckertalk@Gmail.com.
Open the link below to inquire about positions at Melton
apply.rcdl.us/refer/rk5WAdjJZl8
A few of my favorite flatbed tools
Coil Protector
www.myteeproducts.com/heavy-d...
Edge Protector
www.myteeproducts.com/corner-...
This just made Flatbed EASIER!!
Joplin Tarp Co. (417) 825-1217
Open the link below to inquire about positions at Swift
tapit.us/W6AHZk
For Swifty use Driver code HENLAR
Follow me on Twitter @50trucker
If you’re looking for a real truckers journey with no drama, this is a channel for you. We will take a look into the life of a truck drivers day to day routine‘s and learn how to perform daily tasks of a truck driver. Again we don’t do drama on this channel so if that’s what you’re about move on but a little bit of education and a lot of trash talking with a lot of laughter is what we’re about
contact 50 Plus: 50plustruckertalk@gmail.com
Anyone interested in becoming a Melton flatbeder please reach out to me via email at
50Plustruckertalk@Gmail.com.
Пікірлер: 41
I'm currently in Tulsa for my 1st week of orientation. Thank you for this video! Having a blast. Melton is a TOP NOTCH Company. So grateful!
@michaeldomec5275
Жыл бұрын
Say hi to my buddy Matt lol he just started orientation too
Good company with a few dirty trainers that don't take a shower. Ernie from Fresno CA is one of them.
I’m 48 and in the process of studying for my cdl license at would love for you to train me me if you’re available.I love your demeanor and respect for everyone and everything in life as a whole
@50plustrucker
3 ай бұрын
Hello my friend, are you interested in driving flatbed? I’m definitely willing to work with you.
@JamesRobinson-hl6gy
3 ай бұрын
@@50plustrucker yes I’m ready I’ll be going to a school in Sanford,Florida and the first brochure was Melton . I watch u on KZread a lot and the way you represent yourself and your channel is very inspirational
@50plustrucker
3 ай бұрын
@@JamesRobinson-hl6gy thank you very much and if there’s anyway I can assist you you can also reach out to me via email 50Plustruckertalk@gmail.com
My recruiter is Ms. Abby..
I want you to be my trainer!!
I hope all the mentors are just as cool
@50plustrucker
2 жыл бұрын
Thank you very much for your kind words
If you want it bad enough, you can deal with ALL of the BS that comes with the entire process from the moment you decide to become a truck driver. From CDL school where they enroll up to 200 students a month and we wait hours between turns at maneuvers and road time, to the training videos we have to watch, and learning how to do paper logs etc. It's a means to an end. Thank you for sharing your knowledge and experience Sir. Hope to run into you somewhere down the road.
50plus great information I start orientation Dec 6 look forward to starting with Melton every time I check you out it gets me more excited God Bless brother
@50plustrucker
2 жыл бұрын
Thank you very much and bless you as well
Totally agree 50+. Using 'mentor' is best. A much better mind set and culture for both the person learning and the one giving guidance (more kind).
@50plustrucker
2 жыл бұрын
Thank you very much, I totally agree with you
Hey 50-plus, thanks for the video, info and encouragement. Also wanted to say im happy u treat all your students in the same respectful manner because your current student looks like he's from the show Undercover Boss 😆. BE CAREFUL!!!
@50plustrucker
2 жыл бұрын
Yup it’s very possible and I hope I pass the test
@laureanorivera
2 жыл бұрын
Is that Bob Peterson? 😂
i am 21 live in tulsa always wanted to become a truck driver my family has been in the trucking industry for a while and i am applying at melton if all goes well and i work hard enough to get to the point where i am a student in a truck i hope i get a mentor like this man. thank you for the video and the advice both of you
@50plustrucker
2 жыл бұрын
Keep me posted on your progress
🇨🇱 Man here too! Pasadena.
@50plustrucker
2 жыл бұрын
Pasadena Tx?
@meangenemiller3362
2 жыл бұрын
@@50plustrucker yes sir
I just completed training, flying to Tulsa tomorrow… I wonder what’s next
@50plustrucker
2 жыл бұрын
A great career is next
I am here
@50plustrucker
2 жыл бұрын
Keep positive and keep me posted on your progress
Did he just say there’s a lot of things we can do to make the process easier. Straight perv. He not talking about trucking , he sounds very discouraging. I hope dude is doing his thing. This guy look like he been driving 30 years or something. You good at talking. I’m done
A mentor is a trainer who cares.
@50plustrucker
2 жыл бұрын
Apparently not you
@BTUTrucks
2 жыл бұрын
@@50plustrucker I hope you didn’t misunderstand my comment. I made it in reference to a specific moment in your video and it was supposed to convey my respect for how you are setting your mentee up for a successful career by being a trainer that cares about him as a person and the success of your mentee as well as the company.. In my opinion, you are setting the example for your trainee, not only to be a competent and safe flatbedder but to also be a good trainer himself someday and an asset that any company would like to have. You are a mentor that cares about the future of his mentee, the company you both represent and the industry in general. A mentor is a trainer who cares. I was a trainer and mentor for my previous employer for several years before I made the decision to become an owner operator. Keep up the good work and stay safe. I hope I can buy you a coffee one of these days. God bless.
@50plustrucker
2 жыл бұрын
@@BTUTrucks thank you very much and I’m happy you see the positive in my video as I now see the positive in your response and you’ve made my day. I try and give a true picture of what we do and conveying the information is tough sometimes but when I get a response like yours, I’m motivated to keep going. Thank you very much
Hey I am 2 weeks out of getting my cdl through swift! Can I request you?
@50plustrucker
2 жыл бұрын
You can but you’ll have to request me through Melton truck lines because I’ve been here for 2 years now. The person who was my mentor at Swift is still training there and his driver code is HENLAR. Use him as your referral and also asked to get him as your mentor.
@tanner-s9560
2 жыл бұрын
@@50plustrucker awesome thanks so much! Hope to meet you some day down the road my friend!
@50plustrucker
2 жыл бұрын
@@tanner-s9560 Keep me posted and hopefully that’ll happen
@tanner-s9560
2 жыл бұрын
@@50plustrucker got it. I’m doing flatbed as well.
I thought training was just 14 days why did he say 3rd week?
@50plustrucker
2 жыл бұрын
3 weeks on the training truck
@laureanorivera
2 жыл бұрын
14 days orientation. 3rd week is only Monday to do final touches before you hit the road with your Mentor.