Get FREE Mechanical TESTS at www.MechanicalTests.co.uk/

@multiverse6989

4 жыл бұрын

In question no 8, the first figure has two supports therefore force required will be half of that in figure b.......please clarify.

@arteerano

4 жыл бұрын

Balwinder

@joanantiporta29

4 жыл бұрын

4

@bilisiedaka6009

3 жыл бұрын

B

@bilisiedaka6009

3 жыл бұрын

A

Hello, can you please explain question 8....I thought the first pulley system was a 2:1 and the second system is a 1:! (with the pulleys just being a change of direction?)

On Q5 how can either one of these tanks empty they are plugged on bottom

@matthewwiens5064

2 ай бұрын

left valve is open. right valve is closed. Therfor right side tank will not empty.

Hello are you still available? I see most of the comments are sometime ago. Thanks, Nicol

I'm looking to study for a Ramsay Mech test that deals with Mech aptitude, and hydraulica and pneumatics, electronics, conveyor maintenence and troubleshooting tools.. can yo uhelp?

Isn’t Q5 both the same? I don’t know if it’s my mind tricking me, but both tanks are closed off on the bottom.

@christianbatistaruiz3874

Жыл бұрын

thats what i thought aswell. Maybe they are closed until they drain them or idk....

@arienfonfria

Жыл бұрын

No, just look at the valve on A, the pressure of the water will open it

Why would u not puts the answar

@nikcue2542

10 ай бұрын

I skip this guys videos

@C.J.T49

7 ай бұрын

​@@nikcue2542 cause you lazy af

How many of the corner wheels will spin anticlockwise if the string were pulled up?

@CareerVidz

10 ай бұрын

Can you advise which question you are referring to?

How is Q8 A? Isn’t the first picture a 2 rope system and the 2nd picture a 1 rope system? So shouldn’t the 2 rope system require less force to lift the weight?

@jamesharris4803

2 жыл бұрын

Rope A requires a mechanical advantage of 2, 75 divided by 2 is 37.5, therefore rope B has a mechanical advantage of 1 which requires a force of 75 newtons to lift.

@myrialynn

2 жыл бұрын

They are both 2 rope systems, direction doesn't matter in this case (even though the rope A goes down at first, you still have force on it because it goes up next). I hope that made sense?

@I-Gringo-I

Жыл бұрын

@@myrialynn Not at all, I think the A was correct answer, because the weight is shared with two hooks from the ceiling, and on the B weight is not share, it is still connected to the 1 hook, and second wheel just changes the direction of the rope which does not change the pull power.

Unless your selling tests similar to this one, what's the purpose with no answers afterwards? Weird video as you explained the questions in much detail and pointing out the time left to answer, but leaves the viewer wondering......

@Evereghalo

2 жыл бұрын

Yea I find it kinda garbage that the answers aren't included.

@professor4202

2 жыл бұрын

@@Evereghalo it's total garbage. it's just clickbait to sell his other crap.

Hello sir! Where i get the ans?

Sir,6 th and 7 th questions not get please, explain it

Q1 Point A Q2. Crane is equal because of the position of the load in which the 2 ton is at the farthest point of the crane and the 4 ton in which it is in the center therefore the weight of the 4 ton is divided by 2 because it is.in the center of the crane(correct me if im wrong) Q3. 4.Ball and hammer Q4. 37.5 ( divide the distance from the fulcrum to the farthest point of the seasaw its 1/2 of.the distance therefore divide the 75kg by 2 Q5. C both the same Q6. B point Q7. Point C Q.8 B. A Q9. 3 sledgehammer Q10. 75kg Feedback please thanks and if you have questions reply my comment

@weston40on40

7 ай бұрын

Question 7: your answer is incorrect; the weight placed down is bigger than the one with the least leverage. So why would it balance if you give the heavier weight more leverage than the one with less weight and leverage?

@maltmel

3 ай бұрын

Q3. WOULD BE A CLAW HAMMER AZ THA' MOST IN GENERAL HAMMER! THAT IZ WHY IF U WERE TO COP AN AVG. TOOL SET, MORE THAN LIKELY A CLAW HAMMER WOULD BE THERE AZ THEE ONLY HAMMER.

Cant understand why you tell everyone 'well done you've done well' but you don't share the actual correct answers, so nobody knows how they actually did in the test- rendering the whole thing a waste of every bodies time. Baffled.

@B_Machine

3 жыл бұрын

It's because he's trying to get us to comment so he gets more traffic on his videos, and he's trying to play it off by referring to it better teaching.

@lorddro717

2 жыл бұрын

True

Hi I answered these questions in the comments about a month ago. It shows I have a reply from you in my notifications, but I can't figure out how to find your reply to reply back. I can't even find my original comment of my answers for this video. Would love to find out how I did on this.

@CareerVidz

5 жыл бұрын

Thanks Dana... I'm trying to find my response too. Do you have a copy of your answers again and I will take a look?

@danabanfield4958

5 жыл бұрын

Haha no I don't. But if I get time later I'll do them again. Really wanna see how I do. Thanks :)

could you explain 5 and 7 more?

Give us the answers PLEASE! The video will be improved so much better and gain more views or share with us another video that has the answers for this one.

@CareerVidz

3 жыл бұрын

Hi! Would you like to share your answers here? I will be more than happy to mark them for you :)

@theministryofdecolonizatio6480

Жыл бұрын

@@CareerVidz Stupid, why don't you provide the answers^

@tammyallison8735

Жыл бұрын

@@CareerVidz These are my answers 1. A 2. B 3. D 4. A 5. B 6. B 7. A 8. B 9. C 10. B

I just want to say thank you. I went to sit my test yesterday and I passed. I practiced ur test questioned and it made me feel really confident

@CareerVidz

4 жыл бұрын

Hi, Congratulations on passing your test! I am thrilled to hear that the videos made you feel so much more confident! Well done!

I got all 10 correct- nice :D Helps that I watched videos about mechanics some months ago

WHY IS THERE NO ANSWER?

@CareerVidz can you please explain question 10 to me now? Because I have a test within 3 hours from now

@CareerVidz

4 жыл бұрын

Sure no problem, here is my explanation for Q10. This type of pulley system has a mechanical advantage of 2. Therefore, to lift the 75 kg weight will require 75 kgs ÷ 2 = 37.5 kgs. I hope this is most useful to you! I wish you the best of luck for your for your test.

@davincci2268

4 жыл бұрын

Thank you Mr. I am very grateful 🙏

@quychang4471

4 жыл бұрын

​@@CareerVidz I'm confused, in another pulley video there is no mechanical advantage to #10 and it only serves as a change of direction.

@freshweezyboy1733

8 ай бұрын

That pully does not have 2 mechanical advantages @@CareerVidz

@freshweezyboy1733

8 ай бұрын

you're correct@@quychang4471

A, C (if halfway), D, A, B, B, A (I think right hand side longer than left), B, C, B.

@CareerVidz

5 жыл бұрын

Well done, Matt - correct answers to our Mechanical Reasoning Tests exam :)

@charlessaunders9227

2 жыл бұрын

How is 5 b

@mattbrittain6478

2 жыл бұрын

@@charlessaunders9227 the water pushes the valve into the block, not letting the water escape. The valve on A if free to be pushed aside to let the water out.

@Melody-jt6fw

Жыл бұрын

Number is still confusing

@ealmwangjeon9599

Жыл бұрын

@@mattbrittain6478 Wait, I'm confused what about the blockage line between both of the tanks?

I think, for the last question we should use Newton as our unit

Can you please give the key below

both the same Question 2

a, c, d, a, c, b, b, b, c, b - judging from others, only my answer for 10 is different - given the pulley setup adds a mechanical advantage of 2, the force req. is half the weight of the block (75 / 2)?

@brujeriab7600

4 жыл бұрын

The pulley has no mechanical advantage as the weight is direct on it ?

@josephconroy7649

4 жыл бұрын

@@brujeriab7600 the location of the pulley doesn't affect the MA in this example - there are two 'pieces' of cable providing vertical force, so the load is shared between them

A, A, 4, 150kg , both the same, point C, B, BA, tool 3, 150kg

3.4 4. 35kg 5. B 6. B 7. C 8. A 9. 3 10. 15kg

Got a 7/10 according to your comment grading. Thank you for all the info. I have a mechanical aptitude test next week.

@CareerVidz

4 жыл бұрын

Well done! You're most welcome :) I wish you the best of luck for your upcoming test!

@Melody-jt6fw

Жыл бұрын

How did your aptitude test go,did it include any if these questions? I'm writing mine tomorrow

@Privateperson2024

Жыл бұрын

@@Melody-jt6fw how did it go?

I am not a mechanical; however, I thought I would do this exam for fun: 1A, 2A, 3D, 4A, 5A, 6B, 7C, 8B, 9C AND 10D.

Why is the answer on Q10, B?

Will u plss explain question number 5th and 7th once

He doesnt tell you what the correct answers are so a complete waste of time

@CareerVidz

5 жыл бұрын

It's hardly a complete waste of time. Most people post their answers to our videos and we then mark them for them.

@tonybradley8966

5 жыл бұрын

@@CareerVidz so just publish the answers in the comments.....

@CareerVidz

5 жыл бұрын

Thanks for your feedback. We believe people are more likely to try the tests and submit their answers if they are not shown the correct answers beforehand. :)

@zacksaunders8957

5 жыл бұрын

@@CareerVidz that makes no sense

@CareerVidz

5 жыл бұрын

Thans, Zack. We will be making more videos with answers included soon. Have a great week, Richard :)

My answer is A B A A C B C B C B Cry so much in my country we only study about goddam theories that we don't even use ( like wtf why do i need to know how a nuclear bomb worked) this test interested me because i need it to study abroad and the test is quite practical Bc of all of the above i really need more test questions, so that's why i watched and answered the questions In short pls send me more questions and tks for reading this. :)))) love your effort of making such vids

@darienford860

4 жыл бұрын

Um you do know they have questions like these in the U.S in engineering and mechanical test for a Job? And I would look over some of your answers

Why is Q7 A?

1.A 2.both 3.4 4.37.5kg 5.B 6.B 7.A 8.A .9.3 10.150kg

1) a 2) c 3) d 4) d 5) b 6) b 7) c 8) b 9) a 10) d

A A 4 C B B A A 3 75 Wasn't sure about the question on crane. If it's tension on rope it would be equal, but if it's tension on crane structure it would be when crane isn't extended I may be wrong

@noahjames6103

5 жыл бұрын

I believe it is equal. Look at the weight and where the weight is at on the crane. I believe it's for the tension on the crane.

My answer is what a jip. Maybe you're just reading and don't even know the answers. Love these tests I hate them when you do them though. Give the answers

Where are the answers?

I'm 10 and I got all the questions correct ( with a teensy bit of help from my mother )!! Love your videos :)

@CareerVidz

4 жыл бұрын

That's awesome! Well done.

1) A, 2)A , 3)3, 4)A, 5)B, 6)B, 7)B 8)A, 9)4, 10)B .

@kc5068

2 жыл бұрын

3. Is 4,ball peen hammer

A,A,1,37.5kg,B,B,A,A,37.5

Does the line at the bottom of the pipes on question five mean they are sealed? Or is it just bad drawing

@CareerVidz

5 жыл бұрын

Sorry about that - it's poor drawing. They should be opened. Thanks for raising the issue.

@JaySubi53

5 жыл бұрын

CareerVidz can you check mine when you get a second, I’m also confused with Q5, if I am in correct in my answer are you able to give feedback? I’ve liked and subscribed, great content.

Please post the correct answers. You don't know the answers, do you??

@CareerVidz

5 жыл бұрын

Hi these are the answers to the video: Q1: A Q2: B Q3: C Q4: A Q5: C Q6; B Q7: A Q8: A Q9: C Q10: B

@ANKITSINGH-gc1jw

5 жыл бұрын

Thank you !

@wagwan6248

4 жыл бұрын

CareerVidz I got only 1 right 🤦🏽‍♂️

Why can’t you provide answers?

@Rezashah21235

5 жыл бұрын

mark got it all right look at his answers

Question 3 is that a hard soft hammer or a lump hammer

@CareerVidz

3 жыл бұрын

The answer for this Q is D:)

Why not said the answer right after the question......🙄 Some ppl need to study as fast as possible. Makes no sense to me

My answers: 1A, 2A, 3D, 4C, 5B, 6B, 7A, 8A, 9C, 10D

@johnooost

4 жыл бұрын

@Paiton Pires Can you explain the process of how you calculated question 4? Thanks.

@patrickjavier3841

4 жыл бұрын

@@johnooost summation of moment at your reference point. 10(75kg) = 20(37.5kg)

@patrickjavier3841

4 жыл бұрын

Summation must be zero or the two moments should be equal

@patrickjavier3841

4 жыл бұрын

@Paiton Pires 10 should be B

Hi Richard this is my first time having a go I’ve have a test on Tuesday Q1-a Q2-c Q3-d Q4-d Q5-b Q6-c Q7-c Q8-b Q9-c Q10-d Thank you for your help Karl

@barunpramanik786

Жыл бұрын

4a

excellent vidio

@CareerVidz

5 жыл бұрын

Thank you very much! :)

How to give answers to you sir

@CareerVidz

3 жыл бұрын

Please write them here and I'll check over them :)

Here is all the correct answers for those struggling to look for them. Q1: A Q2: B Q3: D Q4: A Q5: B Q6; B Q7: A Q8: A Q9: C Q10: B

1A, 2B, 3-3, 4A, 5B, 6C, 7C, 8A, 9-3, 10C

@CareerVidz

4 жыл бұрын

Hi Mateyos, great attempt! But have another look at questions 6, 7 and 10

@damonj3871

4 жыл бұрын

@@CareerVidz I feel like 3 should be D...Explanation why this is not the case?

Point A, crane a , hammer 4, 75k, tank b , b ,b, a , 3 , 150

@CareerVidz

4 жыл бұрын

Can you please advise the question numbers?

Can someone explain Qsn 5? How tank B will not become empty ?

@freshweezyboy1733

8 ай бұрын

as water flows down from both tanks, the flap on tank A will open due to the flow of water and its not being blocked. On tank B side, theres an object blocking the flap, which is why the water wont empty because the flap wont open

@C.J.T49

7 ай бұрын

​@@freshweezyboy1733honestly makes no sense as both tanks are blocked at the bottom

@freshweezyboy1733

7 ай бұрын

@@C.J.T49 I understand where you’re coming from, but from a mechanical standpoint, the flow will most likely open the valve which will cause tank A to empty

Q1 -A Q2- C Q3-A Q4-A Q5-B Q6-B Q7-C Q8-C Q9-C Q10-B Hope they're correct.

@CareerVidz

4 жыл бұрын

Hi, 6 out of 10 here. Good work! Take another look at Q2 and see if you can get answer B. Take another look at Q3 and see f you can get answer D. Also have another go at Q7 to see if you can get answer A as well as Q8 to see if you can also get answer option A.

@X2ShineJewelry

3 ай бұрын

@@CareerVidz On a different comment from Matt Brittain you said answer 2 is C and answer 8 is B. So, which one is it?

Thank You for refreshing my intuitive senses...:) , great exams I love it! Q1-A Q2-B Q3-D Q4-A Q5-B Q6-B Q7-A Q8-A Q9-C Q10-B

@CareerVidz

4 жыл бұрын

100% correct that's awesome Modris! Well done!

@liangamab3582

7 ай бұрын

A, B, 3, D, B, B, C, A, 4, C

@josesantiago407

2 ай бұрын

good stuff

8/10 thanks for the questions

@CareerVidz

2 жыл бұрын

Good score and no problem!

How do I know which answer key in the comments is correct ?

@CareerVidz

5 жыл бұрын

Hi Cheyenne, post your answers to each question in this thread and I will mark them for you :)

A.B.C.A.B.B.A.A.D

@CareerVidz

5 жыл бұрын

Well done - did you enjoy tackling the Mechanical Reasoning Test questions? Thanks, Richard

1 A 2 C 3 D 4 A 5 B 6 C 7 B 8 B 9 C 10 B Mark, please? Also thanks, bought two of your books! Might buy mechanical as well.

My answers 1b, 2c, 3b, 4d, 5b, 6b, 7b, 8b, 9c 10b.

@CareerVidz

4 жыл бұрын

Hi, Thank you for submitting your answers. Take a look at my answers below and see which ones you got correct. Any you got wrong have another go at them and let me know how you get on. Q1: A Q2: B Q3: D Q4: A Q5: B Q6; B Q7: A Q8: A Q9: C Q10: B

@user-od9xe5oy5s

4 жыл бұрын

Why is B the answer to question 2 and not C ?? Imo it would be B if the weights were both equal

@ramalakshmic5958

4 жыл бұрын

CareerVidz i think 8 th que ans will be A

""" 100% correct that's awesome! Well done! """"" -- YOU SAID THIS TO "" EVERYONE "" EVEN THEIR ANSWERS ARE NOT CORRECT !!!!! ======================================

1 - A 2 - A 3 - D 4 - A 5 - B 6 - B 7 - A 8 - A 9 - C 10- C

@jayleesavage9780

2 жыл бұрын

Isn’t number 10 b? Bc of the pulley system has a mechanical advantage of 2. Therefore 75 divide 2 is 37.5? ?

1.A 2.C 3.C 4.D 5.B 6.B 7.A 8.B 9.D 10.B

@CareerVidz

5 жыл бұрын

Thanks for your answers, Duncan :)

A,C,D,A,B,B,A,B,C,B Q2. Difference in weights needs to be better highlighted. Q8. Wording slightly ambiguous.

@CareerVidz

3 жыл бұрын

Can you please advise the question numbers?

@saiello2061

3 жыл бұрын

@@CareerVidz I did.

A,C,D,A,B,B,A,B,C,B ??? Please tell me exactly how many I got wrong

I think I'm right, but a definitive guide would be helpful 1.A 2.A 3.D 4.A 5.B 6.B 7.A 8.A 9.C 10.B

@CareerVidz

Жыл бұрын

Thank you for your answers. Almost 100% just Q2 is incorrect. Great stuff. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks!

@stenchosmells

Жыл бұрын

See how I get on A C D C B C C C C C Thanks

@liangamab3582

7 ай бұрын

A, B, 3, D, B, B, C, A, 4, C

1. A 2. A 3. D 4. A 5. B 6. B 7. B 8. A 9. C 10. B Please give me some feedback. Thank you.

@CareerVidz

4 жыл бұрын

Hi, thank you for submitting your answers to this video. You got 8 out of 10 correct. Good work! Take another look at Q2 to see if you can get my answer option of B and also have another go at Q7 to see if you can get answer option A.

Answer pls..!!!

A, same, 4, 37.5kg, B, b, a, a, 3, 37.5kg

@CareerVidz

4 жыл бұрын

Q1 correct Q2 try again Q3 correct Q4 correct Q5 correct Q6 correct Q7 correct Q8 correct Q9 correct Q10 correct

ABAACBAA

@CareerVidz

5 жыл бұрын

I would have another look at your answer for Q3 to see if you can find the correct answer. 7 out of 8, Well done! Keep it up :)

1. A 2. C 3. D 4. A 5. B 6. B 7. B 8. A 9.C 10. B (Which ones I have correct?) Thank you.

@CareerVidz

3 жыл бұрын

Hi Edwin, you got most of these questions correct! Excellent work :) Would you like to have another go at Q2 and 7?

Q1-B Q2-B Q3-C Q4-A Q5-B Q6-A Q7-C Q8-B Q9-A Q10-B it this correct sir ?

Q1. A Q2. C Q3. C Q4. A Q5. B Q6. B Q7. A (I assume weight x is heavier?) Q8. C Q9. C Q10. D

1) A 2) A 3) D 4) A 5) A 6) B 7) C 8 B 9) C 10) D

1-A, 2-B, 3-D, 4-A, 5-B, 6-B, 7-A, 8-A, 9-C, 1O-B

1. A&B, 2. Both, 3. 4, 4. B, 5. B, 6.A, 7. B, 8.C, 9. 3, 10. B

@user-gr8dr4rx1f

3 жыл бұрын

So i put my answers above please twll me correct answers i may have missed. And thanks

I want a correct answer sir

Mock Mechanical reasoning Q1 A

This video would be more beneficial if he give you the correct answers at the end.

Sir answer anpuga

1. A, 2. B, 3. 4, 4. C, 5. B, 6.C, 7. B, 8. B, 9. 4, 10. C

@CareerVidz

4 жыл бұрын

Thank you for your post and answers, Q1,2 and 5 are correct. Would you like to try the others again.

Q5: C

@CareerVidz

4 жыл бұрын

Hi, Take another look at Q5 and see if you can get B as the correct answer.

@jomevica.niebres3394

4 жыл бұрын

But A and B are close

Q3 D

1A... 2A... 3D... 4A... 5C... 6C... 7B... 8A... 9D... 10C Please reply soon

@CareerVidz

4 жыл бұрын

Take another look at Q2 and see if you can get answer option B. With Q5 see if you can get the correct answer of B. Give Q6 another go and see if you can get the correct answer of B. Take another go at Q7 and see if you can get the correct answer of A. Q9 would be C, take another go at this one and let me know how you get on. Give this one another go and see if you can get the correct answer of B for Q10. All the other questions you got spot on!

Can I get the answers please?

@CareerVidz

4 жыл бұрын

If you post your answers, we will check your answers for you.

@tahmidahmed6480

4 жыл бұрын

@@CareerVidz I write it in a book it makes things more difficult as you wont reply asap do you get what I mean? You offer excellent advice and lessons it's just the answers that is the problem

@tahmidahmed6480

4 жыл бұрын

For example I'd answer the question but I wont if I'm good enough yet because I wont see the answers instantly I'll have to wait till youre free and can respond

A Same 4 37.5 Not sure B C A 1 37.5

1. A 2. B 3. D 4. D 5. B 6. B 7. A 8. B 9. C 10. D Hopefully I did ok on this even though I have no real knowledge on this

@CareerVidz

3 жыл бұрын

Hi there. You got 7 out of 10. Nice work!

My answer is: 1.) A 2.) A 3.) D 4.) A 5.) C 6.) B 7.) B 8.) B 9.) A 10.) C

Q2 C

My answers are from 1 to 10 and they are A,A,D,D,B,B,A,B,C,C

@CareerVidz

4 жыл бұрын

Other than Q2, 4, 8 and Q10 your answers are correct. Would you like to try the others again?

1a 2c 3d 4a 5b 6b 7a 8a 9c 10b thank you for all the info

@CareerVidz

10 ай бұрын

Thank you for your answers. Q2 is incorrect, but all the others are correct. Well done. Please would you subscribe to my channel? I'd appreciate your support. Thanks! Get free access to our new FREE Psychometric Testing Suite: www.how2become.com/free-psychometric-tests/

AACABAACAB tell me how many of this correct

@alphonsonelson5255

3 жыл бұрын

YOU HAVE 1 CORRECT OR I HAVE ONE CORRECT LOL

Q1/A 2/A 3/4 4/A 5/B 6/B 7/A 8/A 9/3 10/150

@CareerVidz

4 жыл бұрын

Great answers Ryan! Just have another go at question 2 :)

1.b 2.a 3.1 4.a 5.c 6.c 7. b 8.a 9.3 10.d

@CareerVidz

4 жыл бұрын

Hi, Thank you for submitting your answers for this video. Take another look at Q1 and see if you can get A as the correct answer. Give Q2 another go and see if you can get B as the correct answer. Take another look at Q3 to see if you can get D as the correct answer. Give Q5 another look over and see if you can get B as the correct answer. Q6, take another look at this one and see if you can get B as the correct answer. Give Q7 another go and see if you can get A as the correct answer. Take another look Q10 to see if you can get B as the correct answer. All the other questions you got correct good work!

for question 10 its C. There isnt 2 mechanical advantages like you said to others

@CareerVidz

8 ай бұрын

I am sorry, that is not the correct answer. Would you like to try again?

@freshweezyboy1733

8 ай бұрын

@@CareerVidz can you explain

1 A 2 B 3 D 4 A 5 B 6 B 7 B 8 B 9 C 10 C Answers please

@CareerVidz

4 жыл бұрын

Hi, Thank you for your answers to this video! 7 out of 10 here, good work! Take another look at Q7 and Q8 to see if you can get A as the correct answer for both of these. Give Q10 another go and see if you can get B as the correct answer.

Q2 Crane B

@CareerVidz

4 жыл бұрын

B is the correct answer to Q2, Good start so far!

@zak12i

4 жыл бұрын

Thanks