My late Uncle Patrick showed me how to do this when I was 12 years old . He made sure I understood like doing a technical college assessment task that had to be passed .. This is the best way to let it sink in mentally . He was an Automotive Engineer / Mechanic .

first i was like thats not a CBR250RR then i was happily surprised, what a stunner bike you have

This is video what i needed, very useful and nice work I hope this channel will go with this everytime

thanks for the support and help 💯

Awesome Video mate, I came over from the Blog for this bikes build, it's an awesome bike!. I've just replaced the fuel tap on mine but now it isn't running so it's time to do the carbs 🙃. Your Blog has given me a lot of inspiration so I'll probably end up restoring it fully, awesome bikes!. Cheers.

@robertmcfadyen9156

Жыл бұрын

The fuel lines needed checking when the tap was replaced . Then carburettor system flows / lines . My FZR' 250 3LN1 never had this problem as it has an electric motor driven pump like on the MC19 & others . Always put in fresh fuel & fuel filter after this aspect of work is completed .

I hope to ride my FZR 250 3LN1 before Christmas . She is quite healthy and I am looking forward to it .

Thanks mate, perfect video to help me do mine!!

Youre bike sounds damn good

I am happy to have Lucas synchronisers from the USA . Not cheap but Uncle Patrick's recommendation . When I do bicycle work , I only use good quality tools likewise .

Thanks !

Nice video. Where do you get those custom Speedometer? Very beautiful

Track night racing !!!

how do you connect the carby compression kit up to the carby? just bought the same as yours and not sure how to connect it up? cheers

The only useful video in YT about synch carbs.. Thank you.. A qeustion: do you think is better to start by turns CW or CCW ?

@robertmcfadyen9156

Жыл бұрын

Carburettor system work is in some motorcycle textbooks . Especially older TAFE Australia ones .

What are the thick vertical hoses (not the trumpets), my bikes been sitting for a bit and fuel is coming out of it

@seanviper99

4 жыл бұрын

Fuel hoses mate

its like point click adventure game puzzle. it seems it's not easy to do this without sync tool

Hi, why does your cylinder 1 look a lot more responsive than the other 3? Is it something wrong with the gauges or is the compression higher, jetting or fuel screw position different on the 1st cylinder? I've an MC22 myself which had been dismantled for years to be restored, looking to get these gauges as these are much cheaper than a Carbtune/SyncPro but wondering about the accuracy. Also, how did you set your pilot jet fuel screw? Thanks in advance! Sweet bike, good to see more MC22s in great condition!

@Godspeedworks

3 жыл бұрын

Thanks! pretty cool to see these bikes are still as popular as ever. That gauge has nothing to do with the engine condition it's just the gauge setup, there are little T piece valves in the vacuum hoses that allow you to adjust the gauge feedback. I just had #1 a little too far out compared to the rest. As long as it sits even across the board when idling it's okay but usually I would be a bit more thorough. Hard to say with the pilot screw, it takes a few different tries to see what works best. I worked off the factory setting (2 turns out?) and settled on 2-1/8 turns in the end

@eymanyouwell

2 жыл бұрын

@@Godspeedworks is the lcd screen you have aftermarket?

Hello friend, I loved the video consult where do I buy the dashboard of your motorcycle? I am interested in buying one for my mc22 project, greetings from arica-chile

@Godspeedworks

3 жыл бұрын

Hi, you can purchase them on japan.webike website (japan.webike.net/products/21434530.html) I also have a write up of the installation on my blog, link is in the description if you are interested. All the best!

Godspeed Works , do you like good functioning examples of Yamaha FZR 250's . Do you like the 1989 3LN1 . Mine is black with custom blue graphics & a love message on its petrol tank! This was my girlfriend's idea . I am going to hang onto her (the 3LN1) as track days have been great even though I have access to other 250 inline fours of the era . She is my favourite overall . This is a personal thing though & she is well cared for .

Hola mi estimado quisiera saber cuántas vueltas se le da al tornillo de aire (pilot-screw) si me encuentro en sierra ... Buen video!

Hi, I’ve got a 1987 MC17. How are the gauges plugged into each carburettor or are they plugged into existing hoses existing hoses?

@Godspeedworks

3 жыл бұрын

Hey mate, they aren't connected to the carbs at all. The gauges are connected to small nipples on the intake inlets. Just below the carb boots where they connect to the engine you should find a threaded hole on each inlet that you can screw a nipple in (if there is one not already there), hope this helps.

@jaronstephens9894

3 жыл бұрын

@@Godspeedworks thank you for taking the time to explain that, definitely helps. Will have a look at buying some gauges so I can get better performance and fuel economy, as it smells like maybe some carburettors are running a bit rich and maybe others too lean as it can be difficult to start when cold.

@robertmcfadyen9156

Жыл бұрын

@@jaronstephens9894 Most MC22'S , particularly the downrated (R) series delivered in 1994 from production lines that I see in Australia are often out of synchronisation slightly or running too rich . People that do this think that they can regain power levels closer to that of earlier models in this series . Hence sooty exhaust internals are often seen . Sometimes a bit of smoke . This doesn't do much but increase carbon emissions & reduce efficiency .

I tubicini collegati ai manometri dove sono collegati nell'altro lato?

Do you only balance them at idle? What happens at WOT?

@Godspeedworks

3 жыл бұрын

Yes only at idle. All you are doing is aligning the position of each butterfly valve in the throttle body so that they allow the same amount of air into the engine at the given throttle position. Balancing them at WOT or even partial throttle would be pointless IMO

@robertmcfadyen9156

Жыл бұрын

@@Godspeedworks The vanes are aligned at idle because it allows greater accuracy to be achieved in balancing them . They move sympathetically once aligned with respect to the one that is a "REFERENCE" .

Hola qué pasó de que me perdí.... Porque editas el vídeo cuando se acelera Me paso mi mismo

Mc22 carburetor and honda jade 250cc motorcycle carburetor is both are same sync system

This carburetor is dificult i need a support tools like this... 👍👍👍

please, carburetor adjustment equipment name?, and where can i buy it bro

@CarreraJP7-GT

3 жыл бұрын

carburetor synchronizer

@krillining8400

3 жыл бұрын

@@CarreraJP7-GT thank you so much bro

What dash is that ?

@Godspeedworks

3 жыл бұрын

KOSO RX2N+

Can I share RPM Speedmeter panel information?

@Godspeedworks

4 жыл бұрын

KOSO RX2N+

@NipinTa

4 жыл бұрын

Thx

Hello friend how can I synchronize my CBR MC22 please help.

Hi cool vid, does anyone know what kind of dash that is?

@pinoymechanic8745

5 жыл бұрын

can I have the link please

@alexisgarateh

5 жыл бұрын

Hi man how áre you? I have the same dash but i can to setup How do you install?

@asdfghjklzxcvbnm6874

5 жыл бұрын

@@pinoymechanic8745 it's pretty much easy to get in SE asia

@busakiller1117

3 жыл бұрын

You can easily find it on Aliexpress

@robertmcfadyen9156

Жыл бұрын

@@busakiller1117 Verified as I shop on AliExpress often , mainly for bicycle items . I have browsed parts for older 250cc inline four motorcycles on this marketplace .

from 2:08 to 2:12 you have only lowering idle?

@Godspeedworks

Жыл бұрын

Yes, the idle was lowered after both banks were balanced 👍

@robertmcfadyen9156

Жыл бұрын

@@Godspeedworks In the fitters manual it is 1,700 RPM .