Absolutely brilliant. My wife's MX5 has got just this problem and your clear, unhurried instructions are just what's needed. Thank you so much.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

By far the best camera work I have ever seen in ANY youtube car repair video

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

This video is years old but THANK YOU. I have not been able to figure out this leak. Mine is contained by my floor mat thank the heavens, but I can finally fix it. You rock!

@aaanton11

7 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

It is surprising that the Mazda is quite easy to dismantle. Very well presented video.

@aaanton11

4 жыл бұрын

Glad you liked it, Thanks for the great comments👍🏻👍🏻🛠

I have a swimming pool in my passenger foot well. This video is *exactly* what I was looking for. Huge thanks for making it.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video and I'm going to try this this weekend. I did get in touch with my local Mazda dealer and they said it'll cost £138 (+VAT) just to 'assess' the issue on a ramp! Presumably they'd then want another £200+ to fix it! ...Bonkers!

@aaanton11

Жыл бұрын

That is the norm now at the dealerships, nothing short of a con, Thanks for the great comments👍🏻👍🏻🛠

@tyrell4031

Жыл бұрын

@@aaanton11 Just to say I did this job this weekend and can't thank you enough for the superb video instructions. I would class myself as a nervous amateur and so pulling apart the car was a bit scary. I needn't have worried, all the panels just lifted off without any problems. I cleaned the area thoroughly, replaced the grommets, sealed everything with a rubber solution, used back-to-black on all the plastic parts, squirted around some oil and Waxoyl and put it all back together no problems. The parts cost me about £15 and so you've saved me in the region of £300! Flippin' marvelous! :) Just as a tip to anyone thinking of doing this. I found it was easy to remove the wipers and this then made removing the larger cowling piece much easier. This allowed really good access to the driver-side grommet.

You sir, just made my day. I've had the same problem for months and no one has mentioned that intrusion route. Brilliant. Thank you.

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

This is a VERY useful video. Many thanks for your meticulous, well-paced, clear explanation and demonstration. Regards, Chris.

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Thanks so much for posting this - job done and now just got to keep an eye on things. Been wandering around the common drain holes blocked problem for a couple of weeks with no success and was getting worried until I found this straightforward explanation.

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

This is a very helpful and easy to follow video, many thanks for posting this. I feel sure that this is the cause of the problem with a wet passenger footwell in my son’s MX-5. Now feel confident enough to go and explore this ourselves. Greetings from Melbourne, Australia 👍

@aaanton11

4 жыл бұрын

Give it a bash, I would love to know how you get on, Thanks Terry for the great comments👍🏻👍🏻🛠

Was a bit hesitant about tackling this problem until I can across your video. As per your car I had rust underneath proving this was where the leak was from in both of my footwells. Did both sides, piece of cake once you know what to do, thanks

@aaanton11

4 жыл бұрын

Happy to help, well done great job, Thanks for the great comments👍🏻👍🏻🛠

I love you beyond words. Just bought a 2006 nc and found this exact leak. Managed to catch it before the floor got soaked. The problem was exactly what you demonstrated in the video. This is the easiest tutorial I’ve followed, thank you very much ❤❤

@aaanton11

Жыл бұрын

Happy to help, Thanks for the great comments👍🏻👍🏻🛠

Thank you very much for this. Had mine 3 years and always been garaged and used on dry days as much as possible so never noticed a wet foot well. Had to look at the fuse box earlier and was shocked at all of the rust above it! Need to check whether it is old and fixed by a previous owner or if it needs doing. Brilliant step by step. Thank you!

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

I did my NC yesterday whit the same problem. And today i have seen this,and did it the same way you did. Thats give's me the confidence that i did well. I did olso the other site. Great video to exsplain this problem!

@aaanton11

4 жыл бұрын

Well done, it was a nice job to do, Thanks for the great information👍🏻👍🏻🛠

Thanks very much, our MX5 kept getting condensation and I was blaming the roof. Just had it serviced and they mentioned as an advisory some plug hole needed fixing so I was going to get it done at some point. Then the starter wouldn't work so on checking the interior fuse box the floor was soaking ! I never realised as I don't use that side. Fixed the starter by changing the fuse in the engine compartment and stumbled across this video on this other problem ! I will sort it out. Bad design and not sure why that has not been included as a service item that needs checking and perhaps replacing. I noticed my garage must have looked at this because I now notice after your video they forgot to put the first screw black plastic cover back on. :)

@aaanton11

Жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

Just done mine this afternoon after a few youtube videos and have to say you video was the most comprehensive and easy to follow. First MX5 only had it 3 weeks and this was the first job I've had to do but your video enabled me to do mine with confidence. I had ordered new ones rather than recycle the old as also came with the scuttle trim covers insets as advised they break easy, clip did break on one so it a good job I did. Thankfully didn't have dry carpet as caught early when spots of water appeared on the rubber mat in the foot well. Have been advised it's a good idea to do the one on the drivers side at the same time as the rubber on that is likely to be just as bad.

@aaanton11

4 жыл бұрын

well done for the repair, Thanks for the great comments👍🏻👍🏻🛠

Thank you A MILLION !!!!! You saved my life, yesterday I faced the same issue, and I found a little of rust inside near the blower🤦🏻‍♂️. I though it can be another drain hole, but fortunately today I found your video and it made my day!❤😍

@aaanton11

2 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Got exactly the same issue on mine. Thanks for posting this, saved me hours.

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

I spent an hour this morning looking for the source of the leak in my wife's car, a 2009 model. I couldn't find any faulty seals or any signs of ingress round the doors or roof. So I did a search on the internet and your very helpful video came up. As soon as I looked under the dash on the passenger side I could see signs of rust, and a couple of drips of water confirmed it. Now sorted! Thanks for posting this video :)

@aaanton11

3 жыл бұрын

It will definitely be the scuttle fixing point a nice easy fix Thanks for the great comments👍🏻👍🏻🛠

Thanks for this Video, really comprehensive and helped no end. I appreciate the instuctions and details on the fasteners as it is the one thing that cn turn a simple job into a disaster of broken trim. Thanks again

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thanks so much for this! I had exactly the same problem, and stumbled upon your video. When I removed the clip, I could see that the foam gasket was completely perished. I ordered a replacement clip and cover from mx5parts as I didn't have any silicone. Took about 30 minutes from beginning to end to get everything sorted. Street parking, so no hairdryer for me, had to take it for a spin with the roof down and heating on full blast into the footwell instead. Dried out nicely either way. It was bucketing it down yesterday, and the passenger footwell was dry as a bone afterwards. Great video, thank you again!

@aaanton11

3 жыл бұрын

Fantastic job, so pleased you have repaired the leak Thanks for the great comments👍🏻👍🏻🛠

@jim6751

3 жыл бұрын

Sorry to sound stupid but I take it you have a Mx5? Do you reckon these are the same across all Mazda's?

Thank you!! This saved me so much head-scratching! Brilliantly done.

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Wow. That was big job from a small leak but you sorted it. Well done and thanks.

@aaanton11

4 жыл бұрын

Its surprising how water creeps around, a small leak over a long period can cause havoc, Thanks for the great comments👍🏻👍🏻🛠

Mate thank you so much for this!!! I have been trying to figure this out for ages and was so confused. Thought it was coming in through the door seals somehow and this helped me narrow it down!!!!

@aaanton11

9 ай бұрын

Thanks for the great information👍🏻👍🏻🛠

Thanks so much for this mate, been having problems since I bought it but couldn't find where the water was coming from. Just followed this and it took about half an hour. Hopefully this is the only place it's coming from

@aaanton11

2 жыл бұрын

Glad I could help Thanks for the great comments👍🏻👍🏻🛠

Just did this to my wife's 2008 PRHT. Great video, thank you!!

@aaanton11

3 ай бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Great video, very clearly explained and with much detail, thanks.

@aaanton11

4 жыл бұрын

Glad it was helpful!,Thanks Eddie for the great comments👍🏻👍🏻🛠

Brilliant ! First search for this exact same problem and there you are with a great video ! Thanks !

@aaanton11

5 ай бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Fantastic video, very comprehensive, I will have to do all these steps soon, thanks!

@aaanton11

Жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

I've just followed your video and completed the job ..thank you so much for this ..luckily is was a slow drip in heavy storms and only collecting on the car mat , underneath the glove box area was a bit rusty though so I'm going to spray that with some protectant

@aaanton11

Жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Great video thanks! Have a leak in exactly the same place that the dealer has claimed is fixed several times!

@aaanton11

3 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Man! Thank you! Appreciate a lot all details explained. 🙏🏻

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Big help to see this all the way through, thanks and job done! Now I'm wondering how to treat the rust behind the dash....

@aaanton11

2 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Great video thanks, you’re really good at explaining things. Cheers

@aaanton11

2 жыл бұрын

I appreciate that! Thanks for the great comments👍🏻👍🏻🛠

Just been watching your work on the leaking water in the car most interesting Just bought a mx5 last week always good to see where problems could occur thanks

@aaanton11

2 жыл бұрын

Great to hear! Thanks for the great comments👍🏻👍🏻🛠

@11111964s

2 жыл бұрын

@@aaanton11 thanks will look at some more of your work

Great information. One caveat: I will be using butyl rubber sealant or dicor rv roof sealant instead of silicon because heat will eventually dry out the silicon and it will separate from the plastic piece. Butyl rubber or dicor will not, and should outlast the life of the car.

@aaanton11

2 жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

Very good video. Perfect for the maintenance novice like me. Just tried this repair on our MX5, hope it sorts out the problem!

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Got the same issue on the drivers side, carpet it sodden! A job for a good weather day i think. Thanks for the tips!

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Oh yes. Saturday morning sorted. An aaanton11 video. Great content as usual. Alan L200

@aaanton11

4 жыл бұрын

You might still have time to give the L200 a wash and wax😂, Thanks for the great comments👍🏻👍🏻🛠

@AlanL200Truckman

4 жыл бұрын

@@aaanton11 I wish.... Rain ere at Heathrow.... More due in later & overnight..... I wash it on average around 3 times a week..... I use the term "wash" loosely as its my pride en joy..... So its more of a wipe over, to be fair as its never dirty. Av a great weekend. Alan L200

First things to do when buying an older MK3/3.5..... Lift front sill plate & use a decent waterproof mastic around the two fastener clips. Next, the same to the rear high level led brake light housing. Then fetch yourself a trombone cleaner & clean both rain drains. Finally, clean all rubber/foam seals & gummi pfledge (made my sonax) them. 16 yrs of MX5 ownership has taught me a lot about keeping out the rain.

@aaanton11

2 жыл бұрын

Thanks for the great information👍🏻👍🏻🛠

As per previous comments I have now done the footwell plugs replacement if you have time its better to order new ones before replacement if you still need to silicone then you can but I did not also I spent only £6 including delivery for the 2 parts . But this video helped a lot would have been good to see how he took the other cover off on drivers side . But this was very helpful video

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Just finished mopping up the back of ours, left it too long. It made yours look like the sahara. I thought about erecting a "No Diving" sign behind the chair next to the deep end. I'm surprised the bolts did not look like something from the Titanic and were rusted tight. The bottom of the chair was rusty. That switch for the seat heating has always worked plucky thing, must be ex - SAS. I'm going to have to continue drying it tomorrow. January is not the best time for this sort of thing. Wife's birthday on Saturday, we are going to spend some quality time together with some sealant whilst she does the sealing and I give instructions whilst watching your video on the phone. We always argue and then get it done and make up ..... :D Of course the big question is of course ... why does the grommet on the drivers side not do the same ?

@aaanton11

Жыл бұрын

😂Love This, the drivers side can do the same but 9 times out of 10 its always the n/s that fails, Thanks for the great comments👍🏻👍🏻🛠

Thanks for this video.... It's a job that I need to get done after finding so much water in my first winter having my daughter's MX-5. I might cover the car for the rest of the winter spring 😊 I also believe I have a leak through the soft roof and or roof seals.... It's condensation all inside the roof, windscreen and also wet on the seat 😢

@aaanton11

8 ай бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Brilliant video - have exactly this issue and now I know what to do. Cheers!

@aaanton11

2 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Thanks for that. Just recently bought a '57 plate for a bit of cheap fun and first real man-sized downpour this week and the footwell on the passenger side is 'soggy'. It's been bone dry up until now. I will get on this asap - great little video.

@aaanton11

Жыл бұрын

Have fun! Thanks for the great comments👍🏻👍🏻🛠

@sensescaper

Жыл бұрын

@@aaanton11 all done (between the downpours and a tarpaulin) - better weather next week!

Long video but good to see most of what is going on. And bonus is description of the tabs and clips around the area.

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Recently done this repair thanks to your video, so far so good , has been very wet here in NZ . Wettest July on record ?! Cheers again

@aaanton11

Жыл бұрын

Nice work! Thanks for the great comments👍🏻👍🏻🛠

Great job aaanton 👌🏼 now get yourself a coffee ☕

@aaanton11

4 жыл бұрын

Thats a great idea, Thanks for the great comments👍🏻👍🏻🛠

Thanks for the video mate,have the same problem as you.also saved myself alot of money if taken to mazda cheers

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Excellent job!! I just started having this issue on my MX5. I am at a loss as to why they put drain holes under that cover.

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video...sorted my wife's mk3 following this.

@aaanton11

3 жыл бұрын

Fantastic! Thanks for the great comments👍🏻👍🏻🛠

Perfect. Exactly what me and many others needed to know / see. Thank you for the video!

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

@hughgianni4713

2 жыл бұрын

instaBlaster

merci de m'avoir montré d'ou viens la fuitte,j'ai cherché pendant des heures,la reparration c'est bien passée,je suis très content😁

@aaanton11

9 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Really clear and helpful, thanks!

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Excellent tutorial, thanks.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thank you very much indeed, it was great help! Many thanks from the lower rhine side, Germany

@aaanton11

Жыл бұрын

It is beautiful over there, drove to Nuremberg couple of years ago via spa would love to go again, Thanks for the great comments👍🏻👍🏻🛠

not as easy as it looks, but it seemingly works! -thanks!! my gasket was somewhat feeble (2006 orig. owner) NOW! we will see if "slops" are beaten!! (DEF. looked like water ingress!) going to get a new gasket and new plugs LOVE these cars! noisy, bumpy, but SO much fun to drive on a good road !!

@aaanton11

3 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

I was just gonna buy a new car but now thanks to this video I will be able to keep mine for a bit longer

@aaanton11

2 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thanks for sharing 🙏🏼 this helps tremendously!

@aaanton11

Жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Great information on how to do the repair, just slightly concerned about the silicone that you suggest on the link, the Dow 781 is a Acetoxy silicone which can cause metal to corrode!

@aaanton11

3 жыл бұрын

That would be a first, but I will take your word for it, might take 20 years, Thanks for the great information👍🏻👍🏻🛠

You're a lifesaver, thanks mate

@aaanton11

Жыл бұрын

Happy to help Thanks for the great comments👍🏻👍🏻🛠

Thanks for sharing. I am not aware of a leak but I'll be looking now

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Very Informative........ thanks soooooo much....... really appreciated!!!!

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Excellent, we have exactly this problem. Many Thanks

@aaanton11

Жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Great tutorial... cheers

@aaanton11

4 жыл бұрын

Happy to help, Thanks for the great comments👍🏻👍🏻🛠

Thank you! Greetings from Mexico

@aaanton11

3 жыл бұрын

hello, Thanks for the great comments👍🏻👍🏻🛠

Good video. Very informative

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Thanks for that. No damp in my car as yet but I'll do both sides as a preventative measure.

@aaanton11

2 ай бұрын

Thanks for the great information👍🏻👍🏻🛠

Well, changed the grommet both sides. Passenger side was easy - seal was broke in two. Drivers side - had to take the drivers side wiper off but managed to change the grommet without having to take the passenger side wiper off. All good - only issue was one of the little black covers snapped. Well tested with a hosepipe - no leaks anywhere.

@aaanton11

4 жыл бұрын

well done, great job, thanks for the update and for the great comments👍🏻👍🏻🛠

I got this problem, straight away go to youtube my problem solved, Thanks for your video sir.

@aaanton11

11 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thanks heaps saved me a lot of time

@aaanton11

5 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Well done and thank you very much.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Same thing I had to deal with. I would highly recommend you completely remove the seat and remove the carpet. Mold will start to grow in 24 hrs so it's very important to get it completely dry. You will have to cut the carpet at the rear of the console where it connects to other side that way you can completely remove the carpet so it will dry.

@aaanton11

3 жыл бұрын

Thanks Paul for the great information👍🏻👍🏻🛠

thank you so much mate, great vid

@aaanton11

4 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Very useful video for what should be a routine preventative maintenance on any NC MX-5 over 10 years. Notice that he doesn’t show how to do it on the driver’s side, where both wiper arms must be removed before the cowl trim can be removed. A little more complicated but it’s not a big deal.

@aaanton11

Жыл бұрын

The drivers side wasn't leaking. Thanks for the great comments👍🏻👍🏻🛠

Hi super video, thanks!👍👍👍👍

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thank you, had the same trouble, brilliant 👍

@aaanton11

16 күн бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video, really helpful. Thanks

@AngryBritain

3 жыл бұрын

Can I just ask if this fixed it long term? Any problems since? Thanks

@aaanton11

3 жыл бұрын

No further issues, Thanks for the great comments👍🏻👍🏻🛠

@aaanton11

3 жыл бұрын

Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

Great vid, cheers!

@aaanton11

3 жыл бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

Great job

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Hi Anton, thanks for your reply, have you done a video on the leak coming from the plug on drivers side, also I guess that water is leaking in through the rear centre stop light, have you done a video on this!! any advice would be great.

@aaanton11

3 жыл бұрын

I have only done this video on the mx5, the drivers side is the same process, Thanks for the great comments👍🏻👍🏻🛠

You are the best! thanks

@aaanton11

2 жыл бұрын

You're welcome! Thanks for the great comments👍🏻👍🏻🛠

You are great! Thank you.

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Brilliant, thank you

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

¡Muchas gracias!

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I have that on my right side LHD. Just did mine today. I’ll share the results. Ty

@aaanton11

2 жыл бұрын

Same Scenario same repair, Thanks for the great comments👍🏻👍🏻🛠

@Quadzz

2 жыл бұрын

I also just bought one last week today it rained and I noticed it same place and everything so I will have to check that seal.

Amazing video mate! I bought an NC recently and it leaked from the passenger footwell and I was wondering what caused the leak!

@aaanton11

2 жыл бұрын

Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

Thanks so much for this video. I actually had the problem on the driver's side as well but that scuttle panel looked impossible to remove. I had to bend it up to get to the clip which I then cleaned and bonded back in 👍🏻 However the scuttle panel now isn't quite flush to the windscreen in the corner... will this be an issue? Thanks, Geoff

@aaanton11

3 жыл бұрын

the clip wont be located under the screen , no great issue Thanks for the great comments👍🏻👍🏻🛠

Thanks !

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

HI Anton, I have sealed the plug on the passenger side, it seems that there could be the same issue from the drivers side, is it the same procedure, although I guess that you have to remove the wipers, any advice would be great. Regards Craig

@aaanton11

3 жыл бұрын

Yes, it is, Thanks for the great comments👍🏻👍🏻🛠

I have the same problem in my NB :'( Will inspect around the same area tomorrow

@aaanton11

4 жыл бұрын

Let me know how you get on, Thanks for the great comments👍🏻👍🏻🛠

I have the same problem, thanks for the walkthrough. Did you do something with the rusty pieces under the dashboard? Will not get better over time 😉

@aaanton11

Жыл бұрын

No, I just left them if there is no more moisture, the Rust won’t get any worse and it was only slight surface rust Thanks for the great comments👍🏻👍🏻🛠

Does the same happen with the drivers side? Is it worth doing the two at the same time? Very helpful video - thank you.

@aaanton11

4 жыл бұрын

I am a firm believer in if its not broke, don't fix it, if it was leaking then repair it but there is always a chance of damaging the clip, a trim for a job that didn't need doing, Thanks for the great comments👍🏻👍🏻🛠

Thinking of doing this i have the water in the footwells thought it might have come from the drain holes being blocked at the back ,which I have now cleaned .I am thinking if that was the cause of it but watching this I am thinking that it could be both . Just annoyed with the condensation that I am getting. I will need to get the windscreen replaced before the mot so when I will do I will get the windscreen guy to take off all the bits from the front and at the same time get the plastic bits replaced with new ones and add a little sealant just to be sure. Great video otherwise good tips and advice was thinking of getting a car wet and dry vac but will see what options with a possible heater to dry the inside of the car . Something to work on and think about Also maybe just reseal the boot rear brake light as well as I think that will stop the condensation. I am thinking this could be a good opportunity to check the seatbelts and clean them as this is another issue and maybe check the drain pipe to make sure it hasnt come loose while the seat is out Will keep you updated in a month of two but if any of you guys have any tips always welcomed .

@aaanton11

3 жыл бұрын

That would be great, hope you get it sorted, Thanks for the great comments👍🏻👍🏻🛠

Lovely

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great info, and extremely well presented. Also a great accent.🙂 Is the other side the same?

@aaanton11

Жыл бұрын

Yes, it is! Thanks for the great comments👍🏻👍🏻🛠

@terrulian

Жыл бұрын

@@aaanton11 Actually, after looking at the other side, it appears that the wiper arms need to be removed. This requires popping off the cap, and then using a metric socket to remove the nut. A little wiggling is necessary to free the arm from the splined shaft.

Thankyou

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Cheers chap.

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Is there a knack to getting that plate off where the screw is hidden? In the video it just seemed to come out no problem at all. I've been trying for the last 10 mins with a small screw driver. I must be doing something wrong?

@aaanton11

3 жыл бұрын

Maybe yours has been bonded in (be previous owner to stop leak) which now makes it harder to remove, they do just pop out, Thanks for the great comments👍🏻👍🏻🛠

@28:54 the Missus in the background...checking if everything is AOK ;-)

@aaanton11

4 жыл бұрын

😂 I hope its the missus, Thanks for the great comments👍🏻👍🏻🛠