I don’t know what I appreciated more - the real time walkthrough or the awesome song selection! Thank you!

Had to replace my mother-in-law's bumper on her 2016 M3. You saved me hours and plenty of misery. Thanks for taking the time to make this video. Your inventory checks should be an industry standard! Thanks again!!

I had to replace my horn and this video saved me a lot of work and I didn't waste my money at the dealer. THANKS A LOT!!!

THANK YOU so much for taking the time to show this. Much love from Toronto!

Replacing my horn, I have the service manual, but seeing it helps clarify what to expect. Thanks a bunch!

This is one of the best DIY videos I have ever seen. By watching it, it is crystal clear exactly what needs to be done to take a 2014+ Mazda 3 front fascia off. Kudos to Maximus Meridius.

ultra bummed out about the reason I'm looking this up but very happy to see such a good video detailling every little thing. thank you!

So happy this video exists. Thanks keeping it clear and simple!

Excellent video! Saved me lots of time removing the bumper from my 2015. Thank you!

Thank you. Just watched this before changing my 2014 Mazda 6 bumper, and all went well.

GREAT video! Thanks for posting. I just needed to replace the grill on my 2016. This was a great tutorial.

Dude this video really helped me, thanks for posting!

Perfect video! Instructions were very clear step by step thank you!

Beautiful video, so exact and detailed, thanks for the explanations and the good music.

Awesome instructions and the tunes are legit

I find it insane I have to do all of this just to repair a horn, but thanks for making it as easy to understand as possible.

Couldn't find a video for my Mazda 6, but this did the trick. Thanks!

Thanks @ Maximus Meridius, This is the best detailed video esp for the underside.

great demo, thanks for all the info. have to do my soon.

Thank you. Very good video show everything in detail. Help me a lot.

Thanks so much for the excellent video. Great camera work, sequence flow, captions and music! This is really going to help me with a DIY fix to the front bumper.

Thanks for a very informative video!

Is it possible to take off the plastic cover behind the grill? (for more airflow)

What's the chrome bits on the front bumper called? Can't seem to find them anywhere

any chance on getting a video for the rear bumper removal??? (:

really terrific video. thanks!

Is this 2 pieces to make the entire cover? I’m looking into replacing the cover but the one I’m looking at is only the bottom portion and around the headlights. There’s no grill and top portion above the grill on the one I’m looking to buy. Please advise.

Any suggestions on unscrewing the screws that won't come out or even loose with a screwdriver or drill?

11:05 that plastic guard in front of the radiator, can I take that off? Mine is cracked and flimsy and I see no purpose to it. What do you think? And where can I get a fastener kit for the mazda cause I’m missing some

Does anybody know where I can find the bolt/screw specs if I needed to try sourcing them from Home Depot or elsewhere?

Best how to video I’ve seen.

Awesome thank you so much, just worked on my 2018 m3.

I have the same car only that it came with the headlamp washer, I need to replace that entire system do you know anything about it?

Do you know if a 2017 front bumper on a mazda 2 is the same procedure. Great video

Very helpful video, thanks

Awesome vid... Very helpful. Mind making a video removing the center consol as well? or perhaps the Cluster panel?

Now I know why my bumper clip near the fender broke. My technician possibly forced it to pull out where there is a hidden screw behind it 🤦‍♂️ Is it also possible to replace the fog light bulbs even without taking off the bumper?

Good pace. Great vid.

Thanks for your video. Really help me. I want to remove the bumper to uninstall the headlights.

great video. helped a ton

Can I replace this bumper with my Mazda 3 2010?

Thank you sooo much!!! 👍🏻

Exelent video bro !

What mm are the nuts in side the wheel liner ??

excelente video muy bien explicado gracias :D

Any idea how different a 2016 bumper would be? From an untrained eye they don't look terribly different.

Good video. Can’t believe I’ve got to do all this just to get to windscreen washer motor.

I really like that front bumper on Mazda 3. I just really wish this can put in my Mazda 3 2008. Would be awesome!

Hi, Do i have to remove all the front just to get to the lower part. i just need to replace the bottom personally .EDIT: went up until the end and saw the screws so i can remove the front grill. Nice video, will probably change it myself and save lot's of money

Just did this thanks to this video....GREAT JOB love it!!! Took me an hour but with it. Time to scare some kittys

great video

Thanks so much for the video... and the music, it sounds like stellio cantos from American Dad hahaha

Why didn’t you turn the tires to your favor is a lot easier like that

great video... amaizing music¡¡¡ who is?

Thank you for making this video, but those blocks of wood holding up the front end scare the shit out of me.

Many thanks 😊

Is this a RHCP cover? Victorian machinery or something? Great video, thanks.

How did you remove the grille cover, cause I ordered a new one cause mine got scratched, but there only to plastic clips and the rest like some weird metal ones that I don't know how to remove, if you can plz tell me how. Plz & thanks

Thanks pro 😍😘👍

Damn, I need to do all that because my window washer is either cracked or unplugged.

Thanks buddy

Excellent

This will come handy, got hit by an A-hole today that went in reverse and was distracted with his phone. It didn't broke anything since it was slow but the right size of my bumper (the part at 7:29) poped out, my guess is that I could loosen the bolt there and just give it a push.

Does the entire bumper cover have to come off to remove/replace just the grill chrome?

@brendenlyons92

6 жыл бұрын

Yes, it's screwed in from the back of the bumper cover.

@pransiss

4 жыл бұрын

@@brendenlyons92 can you help do i need to remove the bumber to replace the ac condensor.thx

just one question... why are you wearing gloves? lol... ok ok.. great video. thanks

@adamstetler8838

5 жыл бұрын

They are cut/scratch resistant for all the sharp edges and small spaces

the vestry of my life solved i was about to take all the clips and the bolts :)

Like the song

6:00 you timed that fastener pop on purpose huh, I see u

10:16 this is just for me to have a bookmark

Great video but the music was annoying. Mute worked though...✌🏼